Search

China's pulp and paper industry (CPPI) has been always the main carbon emission source in recent years. However, the analysis on influencing factors of carbon emissions from this industry is insufficient. To address the issue, the CO 2 emissions from CPPI are estimated in the period of 2005-2019, the driving factors of CO 2 emissions are investigated by the logarithmic mean Divisia index (LMDI) method, the decoupling state of economic growth and CO 2 emissions is determined by Tapio decoupling model, and finally, future CO 2 emissions are predicted under four scenarios by the STIRPAT model to explore the potential of carbon peaking. The results show that CPPI exhibits a rapid increase and a fluctuating downward trend in CO 2 emissions during the period of 2005-2013 and 2014-2019, respectively. The main promoting and inhibiting factors to the increase of CO 2 emission are per capita industrial output value and energy intensity, respectively. There are five decoupling states of CO 2 emissions and economic growth during the study period, and the CO 2 emissions exhibit a weak decoupling state with the industrial output value growth in most years of the study period. It is very difficult to realize the carbon peaking goal by 2030 under the baseline and fast development scenarios. Therefore, efficient low carbon and strong low-carbon development policies are necessary and urgent for the realization of carbon peaking goal and the sustainable development of CPPI., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Objectives: This paper presents the study design of the Berlin-Brandenburg Air study (BEAR-study). We measure air quality in Berlin and Brandenburg before and after the relocation of aircraft (AC) traffic from Tegel (TXL) airport to the new Berlin-Brandenburg airport (BER) and investigate the association of AC-related ultrafine particles (UFP) with health outcomes in schoolchildren. Methods: The BEAR-study is a natural experiment examining schoolchildren attending schools near TXL and BER airports, and in control areas (CA) away from both airports and associated air corridors. Each child undergoes repeated school-based health-examinations. Total particle number concentration (PNC) and meteorological parameters are continuously monitored. Submicrometer particle number size distribution, equivalent black carbon, and gas-phase pollutants are collected from long-term air quality monitoring stations. Daily source-specific UFP concentrations are modeled. We will analyze short-term effects of UFP on respiratory, cardiovascular, and neurocognitive outcomes, as well as medium and long-term effects on lung growth and cognitive development. Results: We examined 1,070 children (as of 30 November 2022) from 16 schools in Berlin and Brandenburg. Conclusion: The BEAR study increases the understanding of how AC-related UFP affect children's health., Competing Interests: Author SaL was employed by the company Cardinal Health Real-World Evidence and Insights. The remaining authors declare that they do not have any conflicts of interest., (Copyright © 2023 Soppa, Lucht, Ogurtsova, Buschka, López-Vicente, Guxens, Weinhold, Winkler, Wiedensohler, Held, Lüchtrath, Cyrys, Kecorius, Gastmeier, Wiese-Posselt and Hoffmann.)

Buildings are often located near ambient air pollution sources such as wildfire or heavy traffic areas. While windows in buildings are intermittently open for free cooling or natural ventilation, increased leakage area can lead to elevated human exposure to air pollutants of outdoor origin. The objective of this study is to investigate the effectiveness of paper filter windows in reducing exposure to outdoor air pollution and improving indoor air quality. The physical properties of paper windows as filtration media were experimentally determined, based on which multi-zone indoor air quality and ventilation analysis (CONTAM) simulations were performed for a full-scale building. The results show that the outdoor-indoor air exchange rate of a building can increase about 100% when conventional windows are replaced with paper filter windows. Even with the increased air exchange rate, the infiltration of outdoor particles into the building was reduced about 57-77% for the particle size range of 7-300 nm. These findings imply that paper windows have potential benefits for controlling both outdoor originated pollutants and indoor-generated pollutants with minimal energy inputs, especially in cities and communities impacted by urban air pollution and wildfires., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

This paper quantitatively investigates the compositions of the gaseous pollutants in the ambient air of a secondary fiber paper mill. Total volatile organic compounds (TVOC), formaldehyde (HCHO), sulfur compounds (H2S), and hydrocarbon compounds (CxHy) were analyzed on six sampling sites with photo-ionisation detector, acetylacetone spectrophotometric method, and gas detector. The results revealed that, the high levels of TVOC and CxHy were detected at the wet end of paper machine and the office area, respectively; all the H2S contents on the six sites exceeded the limit (0.06 mg m(-3)) seriously; the HCHO concentrations at other five sites were out of the limit (0.10 mg m(-3)) except for the wastewater treatment plant. Furthermore, the necessary discussions about the possible pollution sources were considered on the process flow, the chemical agents used, and the ambient conditions in the paper mill. For the sake of air pollution control in paper mills, these remarkable results and analysis lay some technical basis in the following researches that should attract more attentions.

Alkaline residuals, such as wood ash and lime mud generated from pulp and paper mills, could be recycled as liming agents in sugar maple (Acer saccharum Marsh.) forests affected by soil acidification. The objectives of this study were (1) to evaluate soil chemistry, in particular soil acidity, after the application of three alkaline residuals from the pulp and paper industry, and (2) to determine if these alkaline residuals altered soil greenhouse gas (GHG) emissions as a result of the change in soil pH or due to their chemical composition. Soil properties and GHG fluxes were monitored for two years after alkaline residuals were applied to six forest sites dominated by sugar maple in southeastern Quebec, Canada. Each site received six treatments: wood ash applied at 5, 10 and 20 t ha -1 , lime mud (7.5 t ha -1 ), a mixture of slaker grits and green liquor sludge (7 t ha -1 ) and an unamended control. These treatments had acid-neutralizing power from 0 to 9 t ha -1 . All alkaline residuals buffered soil acidity as a function of their neutralizing power, and more neutralization occurred in the forest floor layer than in the underlying mineral soil. In the forest floor, the alkaline residual treatments significantly increased pH by more than one unit, nearly doubled the base saturation, and reduced exchangeable acidity, Al and Fe concentrations compared to control plots. The CO 2 and N 2 O fluxes were lower after application of alkaline residuals, and this was related to the soil pH increase and the type of alkaline residual applied. Lime mud was more effective at reducing GHG fluxes than other alkaline residuals. We conclude that these alkaline residuals can effectively counteract soil acidity in sugar maple forests without increasing soil GHG emissions, at least in the short term., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Objectives: In China, news media are useful for educating the public about the health threats of air pollution. To explore the potential gaps between scientific findings and the public's understanding of them, the characteristics of news media articles and their corresponding scientific papers were analysed., Methods: We used 22 articles relating to the health outcomes of exposure to outdoor air pollution published on Baidu News over the past year. An assessment tool developed by Robinson et al was used to evaluate the quality scores of news articles. Pearson correlation coefficients were used to measure the relationship between news media reporting and the characteristics of scientific papers. Misleading reporting, interpretation, or extrapolation in headlines and text bodies of news articles were examined., Results: The quality scores of the news articles ranged from -4 to 8, with an overall median score of 3. Correlation results showed that the scientific papers citation in Twitter (r = .88, P < .001) and Facebook (r = .64, P < .01) were significantly and positively associated with their citations in news stories. Media misunderstanding of scientific findings was common: 15 news headlines were identified with at least one spin (misrepresentation of scientific results), and 12 news articles had seven types of spin in the body texts., Conclusion: Little media attention has been paid to scientific findings by Chinese researchers. Therefore, researchers and science journalists in China should make a better effort to engage in accurate and informative public discourse on domestic research., (© 2019 John Wiley & Sons, Ltd.)

The pulp and paper industry is a major contributor to water and air pollution globally. Pulp and paper processing is an intensive energy consuming process that produces multiple contaminants that pollute water, air, and affect ecological and human health. In Canada, the National Pollutant Release Inventory (NPRI) is used to assess the release of air pollutants into the atmosphere from industrial facilities (including pulp and paper mills) and provides a repository of annual emissions reported by individual facilities. This study compared annual air emissions of carbon monoxide, nitrogen oxides, total particulate matter (TPM), PM2.5, PM10, sulphur dioxide, and volatile organic compounds from nine different pulp and/or paper mills in Atlantic Canada from three provinces (Nova Scotia, New Brunswick, and Newfoundland and Labrador) between 2002 and 2019. Results revealed that annual releases were several orders of magnitude higher than federal reporting thresholds suggested by Environment and Climate Change Canada. Pulp mills emit higher pollutant loads than those producing paper. The highest exceedance of a reporting threshold was for particulate matter (PM2.5) at Northern Pulp in Nova Scotia. The emissions of PM2.5 were on average (over a 17-year period) about 100,000% above the reporting threshold of 0.3 tonnes per year.

Objectives: This paper presents the study design of the Berlin-Brandenburg Air study (BEAR-study). We measure air quality in Berlin and Brandenburg before and after the relocation of aircraft (AC) traffic from Tegel (TXL) airport to the new Berlin-Brandenburg airport (BER) and investigate the association of AC-related ultrafine particles (UFP) with health outcomes in schoolchildren.Methods: The BEAR-study is a natural experiment examining schoolchildren attending schools near TXL and BER airports, and in control areas (CA) away from both airports and associated air corridors. Each child undergoes repeated school-based health-examinations. Total particle number concentration (PNC) and meteorological parameters are continuously monitored. Submicrometer particle number size distribution, equivalent black carbon, and gas-phase pollutants are collected from long-term air quality monitoring stations. Daily source-specific UFP concentrations are modeled. We will analyze short-term effects of UFP on respiratory, cardiovascular, and neurocognitive outcomes, as well as medium and long-term effects on lung growth and cognitive development.Results: We examined 1,070 children (as of 30 November 2022) from 16 schools in Berlin and Brandenburg.Conclusion: The BEAR study increases the understanding of how AC-related UFP affect children’s health.

Air toxics are airborne pollutants known or suspected to cause cancer or other serious health effects, including certain volatile organic compounds (VOCs), prioritized by the US Environmental Protection Agency (EPA). While several EPA-designated air toxics are monitored at a subset of Canadian National Air Pollution Surveillance (NAPS) sites, Canada has no specific "air toxics" control priorities. Although pulp and paper (P&P) mills are major industrial emitters of air pollutants, few studies quantified the spectrum of air quality exposures. Moreover, most NAPS monitoring sites are in urban centers; in contrast, rural NAPS sites are sparse with few exposure risk records. The objective of this pilot study was to investigate prioritized air toxic ambient VOC concentrations using NAPS hourly emissions data from a rural Pictou, Nova Scotia Kraft P&P town to document concentration levels, and to determine whether these concentrations correlated with wind direction at the NAPS site (located southwest of the mill). Publicly accessible Environment and Climate Change Canada data (VOC concentrations [Granton NAPS ID: 31201] and local meteorological conditions [Caribou Point]) were examined using temporal (2006-2013) and spatial analytic methods. Results revealed several VOCs (1,3-butadiene, benzene, and carbon tetrachloride) routinely exceeded EPA air toxics-associated cancer risk thresholds. 1,3-Butadiene and tetrachloroethylene were significantly higher (p < 0.05) when prevailing wind direction blew from the northeast and the mill towards the NAPS site. Conversely, when prevailing winds originated from the southwest towards the mill, higher median VOC air toxics concentrations at the NAPS site, except carbon tetrachloride, were not observed. Despite study limitations, this is one of few investigations documenting elevated concentrations of certain VOCs air toxics to be associated with P&P emissions in a community. Findings support the need for more research on the extent to which air toxics emissions exist in P&P towns and contribute to poor health in nearby communities.

Comprehensive surveys conducted at 5-yr intervals were used to estimate sulfur dioxide (SO,) and nitrogen oxides (NO.) emissions from U.S. pulp and paper mills for 1980, 1985, 1990, 1995, 2000, and 2005. Over the 25-yr period, paper production increased by 50%, whereas total SO, emissions declined by 60% to 340,000 short tons (t) and total NO, emissions decreased approximately 15% to 230,000 t. The downward emission trends resulted from a combination of factors, including reductions in oil and coal use, steadily declining fuel sulfur content, lower pulp and paper production in recent years, increased use of flue gas desulfurization systems on boilers, growing use of combustion modifications and add-on control systems to reduce boiler and gas turbine NO, emissions, and improvements in kraft recovery furnace operations.

Air emissions from the U.S. pulp and paper sector have been federally regulated since 1978; however, regulations are periodically reviewed and revised to improve efficiency and effectiveness of existing emission standards. The Industrial Sectors Integrated Solutions (ISIS) model for the pulp and paper sector is currently under development at the U.S. Environmental Protection Agency (EPA), and can be utilized to facilitate multi-pollutant, sector-based analyses that are performed in conjunction with regulatory development. The model utilizes a multi-sector, multi-product dynamic linear modeling framework that evaluates the economic impact of emission reduction strategies for multiple air pollutants. The ISIS model considers facility-level economic, environmental, and technical parameters, as well as sector-level market data, to estimate the impacts of environmental regulations on the pulp and paper industry. Specifically, the model can be used to estimate U.S. and global market impacts of new or more stringent air regulations, such as impacts on product price, exports and imports, market demands, capital investment, and mill closures. One major challenge to developing a representative model is the need for an extensive amount of data. This article discusses the collection and processing of data for use in the model, as well as the methods used for building the ISIS pulp and paper database that facilitates the required analyses to support the air quality management of the pulp and paper sector.

Co-firing of coal and paper mill sludge was conducted in a 103 MWth circulating fluidized bed boiler to investigate the effect of the sludge feeding rate on emissions of SOx, NOx, and CO. The preliminary results show that emissions of SOx and Nx decrease with increasing sludge feeding rate, but CO shows the reverse tendency due to the decrease in combustion temperature caused by a large amount of moisture in the sludge. All emissions met the local environmental requirements. The combustion ashes could be recycled as feed materials in the cement manufacturing process.

We examine the causal effects of PM 2.5 exposure on the burden of long-term care (LTC) by matching a satellite-based PM 2.5 (particulate matter smaller than 2.5 micrometers (μm) in diameter) dataset with a nationally representative longitudinal study in China from 2011 to 2018. We find significant adverse effects of PM 2.5 exposure-instrumented by thermal inversions-on the LTC burden. A 10 μg/m 3 increase in annual PM 2.5 exposure increases average monthly hours of LTC and the associated financial costs by 28 h and CNY 452, respectively. The effects are greater for those who had never smoked nor experienced severe PM 2.5 pollution (annual average PM 2.5  > 35 μg/m 3 ) in the previous 5 years. We also find that as PM 2.5 increases, chronic diseases, particularly cardiovascular diseases, could lead to a higher likelihood of LTC dependency but reduce the total hours and costs of LTC provision. Finally, we find that PM 2.5 reduces the total years of LTC need, suggesting that PM 2.5 increases LTC costs by increasing the severity of LTC dependency, rather than the duration of LTC need. Our findings can assist policymakers in planning for LTC provisions and clean air policies., (© 2024 John Wiley & Sons Ltd.)

This paper looks at the relationship between enterprise size and pollution abatement costs using firm-level datasets in China, where size-dependent distortions may exist in the distribution of enterprises of different sizes. We find that the pollution abatement costs decrease with enterprise size. Compared to the smallest size, the magnitudes of marginal decreases in pollution abatement costs per 1000 CNY of industrial output in the largest size are 3.29 CNY, 0.54 CNY and 2.60 CNY for gas, SO 2 and dust, respectively. Moreover, we further explore the potential mechanisms for the decrease of pollution abatement costs from three perspectives: environmental protection-related investment, regulation intensity, and technological capability. Our findings suggest that the decrease in the intensity of environmental protection-related investment for large enterprises may be directly reduce the intensity of pollution abatement costs. Although large enterprises have low intensity of pollution abatement costs, this does not mean that they are subject to weaker environmental regulation. More importantly, we find that large enterprises may have more adoption of abatement technologies. For SO 2 and dust, the pollutant removal efficiency of the largest enterprises is 4.92% and 1.82% higher than that of the smallest enterprises, respectively. Our results are robust to different specifications. These findings help us enact appropriate policies for enterprises based on their size, thereby improving the efficacy of pollution abatement and achieving the optimal level of pollution abatement for the entire society., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

This study analyzes air pollution through the effects of China's FDI in 27 European countries over a 20-year period, with a focus on the impact of environmental tax revenues (ETRs) and the environmental context in China. The relationship is estimated through spatial regressions that account for the presence of air pollutants in neighboring countries. The findings suggest that China's FDI in Europe does not contribute to air pollution but rather has a positive impact. The presence of environmental charges filters out non-polluting investments, which has a non-linear relationship with PM 2.5 pollution rates. The study also concludes that air pollution is closely linked to the global environmental context, highlighting the positive effects of international agreements in the fight against climate change. Specifically, the study finds a link between China's efforts to address its polluting activities and their impact on European air quality., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: This study sought to ascertain whether there might be excess lung cancer mortality among the population residing in the vicinity of Spanish paper and board industries which report their emissions to the European Pollutant Emission Register (EPER)., Methods: This was an ecological study that modelled the Standardised Mortality Ratio (SMR) for lung cancer in 8073 Spanish towns over the period 1994-2003. Population exposure to industrial pollution was estimated on the basis of distance from town of residence to pollution source. An exploratory, near-versus-far analysis was conducted, using mixed Poisson regression models and an analysis of the effect of municipal proximity within a 50-kilometre radius of each of the 18 installations., Results: Results varied for the different facilities. In two instances there was an increasing mortality gradient with proximity to the installation, though this was exclusively observed among men., Conclusion: The study of cancer mortality in areas surrounding pollutant foci is a useful tool for environmental surveillance, and serves to highlight areas of interest susceptible to being investigated by ad hoc studies. Despite present limitations, recognition is therefore due to the advance represented by publication of the EPER and the study of pollutant foci.

Pulp and paper mills are known large emitters of air pollution creating potential environmental challenges and human health impacts. This study assesses air pollution and associated impacts from connected pulp and paper facilities which operate in Edmundston, New Brunswick, Canada, and Madawaska, Maine, United States (US). Despite operating within two regulatory jurisdictions on both sides of the international border (in Canada and the US), the mills have exceeded their approvals to operate and national air quality regulations multiple times between 2010 and 2017. Previous studies have linked many types of cancer as well as respiratory and cardiovascular diseases to air pollution emitted by pulp and paper mills, making this an important regional issue in Canada and the US. While potential environmental and community impacts are likely similar on both sides of the international border, emissions from each side are not reported on the other, and few studies have been conducted on either side. Historic and ongoing lack of local epidemiological health and environmental impact studies and recommendations for improvements to mill operations to improve environmental and human health are presented.

In cooperation with the world's second largest manufacturer of beverage cartons (SIG Combibloc) for liquid foodstuffs an innovative off-take for neutralisation of reactive gas in a paper laminating machine was constructed. A great challenge during engineering work was ensuring a high concentration of the reactive gas where needed and at the same time minimising work place impact in a machine basically without housing. Preliminary 2D-models of the machine geometry proved to be insufficient in describing all the governing flow phenomena. A simplified 3D-geometry containing all important parts of the complex machinery was necessary for accurate predictions. It was found that the driving force of air movement and transport of reactive gas (which acts as an adhesive agent) from the reaction zone in the interior of the laminating machine to the outside is a boundary flow caused by the rapid movement of carton material and rotating cylinders. A physically correct simulation result of the boundary flow is a premise for correct prediction of air flow in and around the machinery. Lacking experimental data (due to an inaccessible geometry) a worst case scenario was constructed by generating a grid and using turbulence models that maximised mass transport in the boundary layer region and thus emission of (tracer)gas from the machine. CFD simulations were done using the geometry preprocessor Gambit, and the finite volume solver Fluent. The results of the analysis of the emission paths from the machine were surprising and led to the construction of an effective off-take relatively far away from the emission source. The chosen position ensures low disturbance of highly sensitive flow patterns inside the machine and diffusive mixing, dilution and contamination of the surroundings. The effect of the new off-take is an immediate and significant rise in air quality in the vicinity of the laminating machine and ensures maximum allowed concentration in the plant area. The product quality furthermore is uncompromised by the working off-take which was another important goal of this work.

Changes in material use, energy use and emissions profiles of industry are the result of complex interrelationships among a multitude of technological and economic drivers. To better understand and guide such changes requires that attention is paid to the time-varying consequences that technology and economic influences have on an industry's choice of inputs and its associated (desired and undesired) outputs. This paper lays out an approach to improving our understanding of the dynamics of large industrial systems. The approach combines engineering and econometric analysis with a detailed representation of an industry's capital stock structure. A transparent dynamic computer modeling approach is chosen to integrate information from these analyses in ways that foster participation of stakeholders from industry and government agencies in all stages of the modeling process-from problem definition and determination of system boundaries to generation of scenarios and interpretation of results. Three case studies of industrial energy use in the USA are presented-one each for the iron and steel, pulp and paper, and ethylene industry. Dynamic models of these industries are described and then used to investigate alternative carbon emissions and investment-led policies. A comparison of results clearly points towards two key issues: the need for industry specific policy approaches in order to effectively influence industrial energy use, fuel mix and carbon emissions, and the need for longer time horizons than have typically been chosen for the analysis of industrial responses to climate change policies.

Paper is a widely used material and common recyclable household waste in waste disposal, which gets more attention nowadays for the misclassification of recyclable waste. In this work, an online source tracing system combined with machine learning algorithms to identify and classify the smoke of waste paper incineration based on laser-induced breakdown spectroscopy (LIBS) was established. Four types of waste paper, including tissue, corrugated paper, printing paper, and newspaper, were taken as examples. The smoke of four different waste papers was detected by LIBS and then further analyzed. The detected spectra with C, N, O, Mg, Al, and Ca could hardly be distinguished artificially. The random forest algorithm and the linear discriminant analysis were introduced to classify the smoke, and its accuracy reached 95.83%. The results indicate that source tracing of waste paper can be realized by identifying and classifying the smoke via the developed system. This could provide some reference for helping us to monitor the effectiveness of waste classification and incineration and monitor the atmosphere pollution. [ABSTRACT FROM AUTHOR]

All experiments were carried out in a prototype vortexing fluidized bed combustor (VFBC). The dimension of the combustion chamber is 0.7 x 1.4 x 2 m, and the freeboard section is 1 m i.d. and 4 m in height. Paper sludge was used as the feeding material. Two types of coal particles were employed as the supplementary fuel. In order to understand the characteristics of the VFBC system for paper sludge incineration, the effect of various operating parameters, such as the primary airflow, excess air ratio, and secondary airflow rates, on temperature distribution, ash elutriation, combustion efficiency, and pollutant emissions were investigated.

There is concern that the carbon prices generated through climate policies are too low to create the incentives necessary to stimulate technological development. This paper empirically analyzes how the Swedish carbon dioxide (CO2) tax and the European Union emission trading system (EU ETS) have affected productivity development in the Swedish pulp and paper industry 1998-2008. A Luenberger total factor productivity (TFP) indicator is computed using data envelopment analysis. The results show that climate policy had a modest impact on technological development in the pulp and paper industry, and if significant it was negative. The price of fossil fuels, on the contrary, seems to have created important incentives for technological development. Hence, the results suggest that the carbon prices faced by the industry through EU ETS and the CO2 tax have been too low. Even though the data for this study is specific for Sweden, the models and results are applicable internationally. When designing policy to mitigate CO2 emissions, it is vital that the policy creates a carbon price that is high enough - otherwise the pressure on technological development will not be sufficiently strong., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The health effects of air pollution remain a public concern worldwide. Using data from the Global Burden of Disease 2019 report, we statistically analyzed total mortality, disability-adjusted life years (DALY), and years of life lost (YLL) attributable to air pollution in eight East African countries between 1990 and 2019. We acquired ambient ozone (O 3 ), PM 2.5 concentrations and household air pollution (HAP) from the solid fuel from the State of Global Air report. The multilinear regression model was used to evaluate the predictability of YLLs by the air pollutants. We estimated the ratio rate for each health burden attributable to air pollution to compare the country's efforts in the reduction of air pollution health burden. This study found that the total number of deaths attributable to air pollution decreased by 14.26% for 30 years. The drop came from the reduction of 43.09% in mortality related to Lower Respiratory tract Infection (LRI). However, only five out of eight countries managed to decrease the total number of deaths attributable to air pollution with the highest decrease observed in Ethiopia (40.90%) and the highest increase in Somalia (67.49%). The linear regression model showed that HAP is the pollutant of the most concern in the region, with a 1% increase in HAP resulting in a 31.06% increase in regional YLL (R 2  = 0.93; p < 0.05). With the increasing ground-level ozone, accompanied by the lack of adequate measures to reduce particulate pollutants, the health burdens attributable to air pollution are still a threat in the region., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Objective: To investigate associations between air particulate matter of ≤2.5 μm in diameter (PM 2.5 ) and ovarian cancer., Design: County-level ecological study., Setting: Surveillance, epidemiology, and end results from a collection of state-level cancer registries across 744 counties. Data from the Environmental Protection Agency's network for PM 2.5 monitoring was used to calculate trailing 5- and 10-year PM 2.5 county-level values. County-level data on demographic characteristics were obtained from the American Community Survey., Population: A total of 98 751 patients with histologically confirmed ovarian cancer as a primary malignancy from 2000 to 2016., Methods: Generalised linear regression models were developed to estimate the association between PM 2.5 and PM 10 levels, over 5- and 10-year periods of exposure, and ovarian cancer risk, after accounting for county-level covariates., Main Outcome Measures: Risk ratios for associations between ovarian cancer (both overall and specifically epithelial ovarian cancer) and PM 2.5 levels., Results: For the 744 counties included, the average PM 2.5 level from 1990 through 2018 was 11.75 μg/m 3 (SD = 3.7) and the average PM 10 level was 22.7 μg/m 3 (SD = 5.7). After adjusting for county-level covariates, the overall annualised ovarian cancer incidence was significantly associated with increases in 5-year PM 2.5 (RR = 1.11 per 10 units (μg/m 3 ) increase, 95% CI 1.06-1.16). Similarly, when the analysis was limited to epithelial cell tumours and adjusted for county-level covariates there was a significant association with trailing 5-year PM 2.5 exposure models (RR = 1.12 per 10 units increase, 95% CI 1.08-1.17). Likewise, 10-year PM 2.5 exposure was associated with ovarian cancer overall and with epithelial ovarian cancer., Conclusions: Higher county-level ambient PM 2.5 levels are associated with 5- and 10-year incidences of ovarian cancer, as measurable in an ecological study., (© 2023 John Wiley & Sons Ltd.)

In this paper, we study the short-term effect of fine particulate matter (PM 2.5) exposure on respiratory emergency room (ER) visits in Chile, a middle-income country with high levels of air pollution. To instrument for PM 2.5, we use wind speed at different altitudes (pressure levels). Unlike previous papers, our data allow us to study the impact of high pollution levels across all age groups. We find that a 1 μg per cubic meter (μg/m 3 ) increase in PM 2.5 exposure for 1 day increases ER visits for respiratory illness by 0.36%. The effect is positive and significant for all age groups. Furthermore, the coefficients on government environmental alerts suggest that avoidance behavior becomes increasingly significant across all age groups as restrictions become more severe., (© 2023 John Wiley & Sons Ltd.)

Air pollution exerts crucial influence on crop yields and impacts regional and global food supplies. Here we employ a statistical model using satellite-based observations and flexible functional forms to analyse the synergistic effects of reductions in ozone and aerosols on China's food security. The model consistently shows that ozone is detrimental to crops, whereas aerosol has variable effects. China's maize, rice and wheat yields are projected to increase by 7.84%, 4.10% and 3.43%, respectively, upon reaching two air quality targets (60 μg m -3 for peak-season ozone and 35 μg m -3 for annual fine particulate matter). Average calories produced from these crops would surge by 4.51%, potentially allowing China to attain grain self-sufficiency 2 years earlier than previously estimated. These results show that ozone pollution control should be a high priority to increase staple crop edible calories, and future stringent air pollution regulations would enhance China's food security., (© 2024. The Author(s), under exclusive licence to Springer Nature Limited.)

Exposure to high molecular weight sensitizers of biological origin is an important risk factor for the development of asthma and rhinitis. Most of the causal allergens have been defined based on their reactivity with IgE antibodies, and in many cases, the molecular structure and function of the allergens have been established. Significant information on allergen levels that cause sensitization and allergic symptoms for several major environmental and occupational allergens has been reported. Monitoring of high molecular weight allergens and allergen carrier particles is an important part of the management of allergic respiratory diseases and requires standardized allergen assessment methods for occupational and environmental (indoor and outdoor) allergen exposure. The aim of this EAACI task force was to review the essential points for monitoring environmental and occupational allergen exposure including sampling strategies and methods, processing of dust samples, allergen analysis, and quantification. The paper includes a summary of different methods for sampling and allergen quantification, as well as their pros and cons for various exposure settings. Recommendations are being made for different exposure scenarios., (© 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)