Search

Paper sludge biomass represents an underutilized feedstock rich in pulped and processed cellulose which is currently a waste stream with significant disposal cost to industry for landfilling services. Effective fractionation of the cellulose from paper sludge presents an opportunity to yield cellulose as feedstock for value-added processes. A novel approach to cellulose fractionation is the sidehill screening system, herein studied at the pilot-plant scale. Composition analysis determined ash removal and carbohydrate retention of both sidehill and high-performance benchtop screening systems. Sidehill screening resulted in greater carbohydrates retention relative to benchtop screening (90% vs 66%) and similar ash removal (95% vs 98%). Techno-economic analysis for production of sugar syrup yielded a minimum selling price of $331/metric ton of sugar syrup including disposal savings, significantly less than a commercial sugar syrup without fractionation. Sensitivity analysis showed that screening conditions played a significant role in economic feasibility for cellulosic yield and downstream processes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Petroleum-based plastics, such as PP, PE, PVC, etc., have become an important source of environmental pollution due to their hard degradation, posing a serious threat to the human health. Isolating nanocellulose from abundant biomass waste resources and further integrating the nanocellulose into hydrophobic transparent film (i.e., nanopaper), to replace the traditional nondegradable plastic film, is of great significance for solving the problem of environmental pollution and achieving sustainable development of society. This study respectively extracted nanocellulose from the branches of Amorpha fruticosa Linn., wheat straw, and poplar residues via combined mechanical treatments of grinding and high-pressure homogenization. Among them, the nanocellulose derived from the Amorpha fruticosa has a finer structure, with diameter of about 10 nm and an aspect ratio of more than 500. With the nanocellulose as building block, we constructed hydrophilic nanopaper with high light transmittance (up to 90%) and high mechanical strength (tensile strength up to 110 MPa). After further hybridization by incorporating nano-silica into the nanopaper, followed by hydrophobic treatment, we built hydrophobic nanopaper with transmittance over 82% and a water contact angle of about 102° that could potentially replace transparent plastic film and has wide applications in food packaging, agricultural film, electronic device, and other fields.

Dried leaves are a potential source of energy although these are not commonly used beside to satisfy daily energy demands in rural areas. This paper aims at preparing a leafy biomass feedstock in the form of briquettes which can be directly used for combustion or to extract the combustible gas using a gasifier. Teak (Tectona grandis) and rubber (Hevea brasiliensis) leaves are considered for the present study. A binder-assisted briquetting technique with tapioca starch as binder is adopted. Properties of these leafy biomass briquettes such as moisture content, calorific value, compressive strength, and shatter index are determined. From the study, briquettes with biomass-to-binder ratio of 3:5 are found to be stable. Higher mass percentage of binder is considered for preparation of briquettes due to the fact that leafy biomasses do not adhere well on densification with lower binder content. Ultimate analysis test is conducted to analyze the gasification potential of the briquettes. Results show that the leafy biomass prepared from teak and rubber leaves has calorific values of 17.5 and 17.8 MJ/kg, respectively, which are comparable with those of existing biomass feedstock made of sawdust, rice husk, and rice straw.

This paper elaborates experimental analysis of cardboard/sawdust briquettes as a viable option for biomass fuel. Physical-mechanical and thermal characteristics of cardboard/sawdust briquettes were investigated. The influence of the main parameters on heating content was also examined through an ANOVA and regression analysis, i.e. pressure influence (that was applied in a punch-and-die process), cardboard/sawdust ratio influence and finally drying temperature influence. In order to find the maximum heating value, minimum ash content and maximum compressive strength optimization were done. The optimal values obtained for the studied briquetting process parameters are a compression force of 588.6 kN, a sawdust mass of 46.66% and a drying temperature of 22°C. According to the mathematical model obtained, these optimal values give a maximum higher heating value of 17.41 MJ/kg, a minimum ash content of 6.62% and a maximum compressive strength of 149.54 N/mm. Finally, Cardboard/sawdust briquettes showed potential for application as viable biomass fuel., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

This paper reports the continuous reductive amination of different molecules, including biomass-related compounds, over carbon-supported FeNi nanoparticles obtained on the basis of inexpensive and abundant metal precursors and cellulose. A biorefinery case study for the preparation of pyrrolidones via acid-catalyzed hydrolysis of glucose followed by reductive amination of the obtained levulinic acid is described., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The aim of the study was to grow microalgae on mixed municipal and industrial wastewater to simultaneously treat the wastewater and produce biomass and lipids. All algal strains grew in all wastewater mixtures; however, Selenastrum minutum had the highest biomass and lipids yields, up to 37% of the dry matter. Nitrogen and phosphorus removal were high and followed a similar trend in all three strains. Ammonium was reduced from 96% to 99%; this reduction was due to algal growth and not to stripping to the atmosphere, as confirmed by the amount of nitrogen in the dry algal biomass. Phosphate was reduced from 91% to 99%. In all strains used the lipid content was negatively correlated to the nitrogen concentration in the algal biomass. Mixtures of pulp and paper wastewater with municipal and dairy wastewater have great potential to grow algae for biomass and lipid production together with effective wastewater treatment., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

Treating ground bagasse or Southern yellow pine in the biodegradable ionic liquid (IL), choline acetate ([Cho][OAc]), at 100°C for 24h led to dissolution of hemicellulose and lignin, while leaving the cellulose pulp undissolved, with a 54.3% (bagasse) or 34.3% (pine) reduction in lignin content. The IL solution of the dissolved biopolymers can be separated from the undissolved particles either by addition of water (20 wt% of IL) followed by filtration or by centrifugation. Hemicellulose (19.0 wt% of original bagasse, 10.2 wt% of original pine, containing 14-18 wt% lignin) and lignin (5.0 wt% of original bagasse, 6.0 wt% of original pine) could be subsequently precipitated. The pulp obtained from [Cho][OAc] treatment can be rapidly dissolved in 1-ethyl-3-methylimidazolium acetate (e.g., 17 h for raw bagasse vs. 7h for pulp), and precipitated as cellulose-rich material (CRM) with a lower lignin content (e.g., 23.6% for raw bagasse vs. 10.6% for CRM)., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The use of waste wood as an energy carrier has increased during the last decade. However, elevated levels of alkali metals and chlorine in waste wood compared to virgin biomass can cause increased deposit formation and higher concentrations of organic pollutants. In this study, we investigated the effect of the ChlorOut technique on concentrations of organic pollutants. Ammonium sulfate was injected into the combustion system to inhibit formation of KCl (which causes deposits) and persistent organic pollutants, namely polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs). The results showed that concentrations of the toxic congeners of PCDD, PCDF and PCB decreased in the presence of ammonium sulfate., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The goal of this study is to evaluate the feasibility of PHA biosynthesis from kraft mill effluent using the batch system evaluating the biomass origin and C:N relationship influence. To evaluate feasibility, batch assays were carried out. Also, two levels of the BOD5:N:P relationship (100:5:1 and 100:1:0.2) and three different sludge origins were considered. Inocula were obtained from activated sludge treatment plants for a) sewage (SAS), b) paper mill (PAS) and c) kraft (KAS). The results show that the maximum Biological Oxygen Demand (BOD5) and Chemical Oxygen Demand (COD) removal was 80.5% and 59.7% respectively using KAS as inoculum. In these assays, kinetics constants were 17.9±3.2 mg L(-1) and 46.5±1.2 d(-1) for (KCOD) and (rmax), respectively under a BOD5:N:P relationship of 100:5:1. The maximum PHA accumulation was obtained under a BOD5:N:P relationship of 100:1:0.2 on the third day of batch assays using PAS sludge with 25.72% of the cells accumulating PHA and on the fifth day in batch using SAS and KAS sludge with 25.85% and 30.40% of cells accumulating PHA, respectively. Yields obtained for the 100:1:0.2 relationships ranged from 0.10-0.14 mg PHA mg(-1) COD.

In this work, isolation of the cellulose fibres was carried out via the Feedstock Impregnation Rapid and Sequential Steam Treatment process (FIRSST). The latter allows the separation of extractives, hemicellulosic sugars and lignin isolating the cellulose fibres. Quantitative data on the constitutive macromolecules of biomass was obtained using ASTM or TAPPI standard methods. Carbohydrates found in the hemicelluloses were also quantified using HPLC. Kraft pulp from whole biomass has also been produced at a bench scale (few kg per batch) using known and established pulping conditions. The pulps from both pulping techniques were tested following ATTPC standard methods. Pulp yields were of 34% for the classical Kraft processes (using whole biomass) while the FIRSST process showed yields around 30%. The average fibre lengths were similar for FIRSST pulp (0.39 mm) and Kraft pulp (0.41 mm) and the mechanical properties of the FIRSST pulp were as good as those of the Kraft pulp., (Copyright 2009 Elsevier Ltd. All rights reserved.)

In order to identify faster-growing non-woody species usable for biomass and paper production, four Leucaena species (L.diversifolia, L. colinsii, L. salvadorensis and three varieties of L. leucocephala) were tested. All the Leucaena species showed a good soil and climatic adaptation to Spain Southwest except for L. salvadorensis. Studied Leucaena species showed biomass productivity ranges from 67.14 to 9.44 t ha(-1) (o.d.b.) and 43.6 to 11.4 t ha(-1) under Mediterranean conditions for the first and second year sprouts, respectively. The quantity of solubles and extractives shows similar values when compared with wood materials. Relatively lower lignin content in Leucaena (from 15.7% to 21.4%) species has been found with respect to other vegetal species. The alpha-cellulose contents (39.4-45.3%) are in the range of the normal values expected for the other non-wood raw materials. The study confirms the feasibility of organocell yield pulping process to Leucaena species. Organocell process provides an efficient delignification (kappa number 12.4 and pulp yield 42.2%) for L. leucocephala and suitably physical characteristics of paper sheet (tensile index 20.3 kNm/kg for L. diversifolia).

In order to identify faster-growing non-woody species usable for biomass and paper production, four Tagasastes (Chamaecytisus proliferus) from different origins are tested. All the Tagasaste species (T. Huelva, T. Australia, T. New Zealand and T. La Palma island) show a good soil and climatic adaptation to Southwest Spain. The studied Tagasaste provenances shows biomass productivity ranges from 1.0 t ha(-1)yr(-1) to 3.4 th a(-1)yr(-1) (o.d.b.) and 25.3 t ha(-1)yr(-1) to 49.4 t ha(-1)yr(-1) under Mediterranean conditions for first and second year sprouts, respectively. The quantity of solubles and extractives shows similar values when compared with wood materials. A relatively lower lignin content in Tagasaste (from 13.7% to 17.1%) species has been found with respect to other vegetal species. The alpha-celullose contents (43.6-45.3%) were in the range of the normal values expected for the other non-wood raw materials. The study confirms the feasibility of the organocell yield pulping process to Tagasaste provenances. Organocell processes provide an efficient delignification (kappa index from 7.2 to 10.9 and pulp yield from 43.6% to 54.1%). The best results are obtained for the physical properties of paper sheets for Tagasaste from Australia in the second year, with values of tensile index of 16.0 kNm/kg, burst index of 1.12 MPa m2/kg and tear index of 0.55 Nm2/kg.

The cultivation conditions for Rhizopus oryzae grown in synthetic medium and paper pulp spent sulfite liquor (SSL) were investigated to achieve high biomass and ethanol yields using shake flasks and bioreactors. The fungus assimilated the hexoses glucose, mannose and galactose, and the pentoses xylose and arabinose as well as acetic acid which are present in SSL. The assimilation of hexoses was faster than pentoses during cultivation in a synthetic medium. However, all sugars were assimilated concomitantly during growth in SSL supplemented with ammonium, magnesium, calcium, phosphate, sulfate and trace amounts of some other metal ions (SSL-S). The medium composition had an important influence on biomass yield. The highest biomass yields, viz. 0.18 and 0.43 g biomass/g sugar were obtained, when the cells were cultivated in shake flasks with a synthetic medium containing glucose as carbon and energy source and SSL-S, respectively. The corresponding yields in a bioreactor with more efficient aeration were 0.22 and 0.55 g/g. In addition to the biomass, ethanol, lactic acid, and glycerol were important extracellular metabolites of the cultivation with maximum yields of 0.37, 0.30 and 0.09 g/g, respectively. When the source of sugars in the medium was exhausted, the fungus consumed the metabolites produced, such that the liquid medium was depleted of potential oxidizable nutrients. In general, there was a direct competition between lactic acid and ethanol among the metabolites. Poor medium compositions and cultivation conditions resulted in higher yields of lactic acid, whereas the ethanol and biomass yields were higher in rich media. SSL-S supported good growth of mycelium and a high ethanol yield.

The impetus for this paper is Canada's commitment under the United Nations Framework Convention on Climate Change to reduce national greenhouse gas emissions as well as reducing our dependency on fossil fuels. Wood-based ethanol offers an excellent opportunity for greenhouse gas mitigation due to market potential, an ability to offset significant emissions from the transportation sector, a reduction of emissions from CO2-intensive waste-management systems, and carbon sequestration in afforested plantations. While there are technological and economic barriers to overcome, using wood-biomass as a source of ethanol can be an economically viable tool for reducing greenhouse gas levels in the atmosphere. This paper examines the costs and mitigation potential of the production of ethanol from biomass supplied from industrial wood waste as well as from trees harvested from afforested land.

The forest products industries play a vital role in the economic, social, and environmental well-being of the Lake States in the United States. While various economic contribution analyses of forest products industries have been conducted to highlight the importance of such industries to regional economies, little effort has yet been made to parse out the contribution of activities in the value chain. The value chain is a series of steps involved in producing goods or services. This study used a matrix decomposition approach to estimate the economic contribution along the value chain through multiple pathways of four forest resource-based industries using wood as inputs: biomass power generation, sawmills, paper mills, and the construction of new single-family residential structures in the Lake States. The direct and indirect economic output values in 2017 resulting from the construction of new single-family residential structures were $19.1 billion, sawmills were $2.5 billion, paper mills were $17.6 billion, and the biomass power generation industry was $759 million. Of the direct and indirect economic output contributed by each industry, the highest percentage of output attributable to the logging industry was observed from the sawmills industry (12%), followed by biomass power generation (9%), paper mills (1.4%), and the construction of new single-family residential structures (<1%), respectively. The percentage of total economic output attributable to the stumpage industry in the region followed a similar trend as commercial logging for all value-chain industries. The relative economic contribution of the value-chain industries to the total economic contribution of the final industry varied based on whether the industry was a primary or secondary forest products industry and the pathways used for sourcing wood inputs. [ABSTRACT FROM AUTHOR]

The forest products industries play a vital role in the economic, social, and environmental well-being of the Lake States in the United States. While various economic contribution analyses of forest products industries have been conducted to highlight the importance of such industries to regional economies, little effort has yet been made to parse out the contribution of activities in the value chain. The value chain is a series of steps involved in producing goods or services. This study used a matrix decomposition approach to estimate the economic contribution along the value chain through multiple pathways of four forest resource-based industries using wood as inputs: biomass power generation, sawmills, paper mills, and the construction of new single-family residential structures in the Lake States. The direct and indirect economic output values in 2017 resulting from the construction of new single-family residential structures were $19.1 billion, sawmills were $2.5 billion, paper mills were $17.6 billion, and the biomass power generation industry was $759 million. Of the direct and indirect economic output contributed by each industry, the highest percentage of output attributable to the logging industry was observed from the sawmills industry (12%), followed by biomass power generation (9%), paper mills (1.4%), and the construction of new single-family residential structures (

Objective: To determine the cellulose, hemicellulose, and lignin production in six Cenchrus purpureus cultivars, with and without fertilization, harvested every 21 days during 168 days. Design/methodology/approach: The evaluated cultivars were CT-115, elephant grass, king grass, Maralfalfa, Roxo, and Taiwan, with and without fertilization. The experimental design was a randomized complete block with a split-plot arrangement and four replications. The fertilization dose was 141-43-20 of NPK. Forage was harvested every 21 days during six months in the rainy season. We tested the samples for dry matter (DM), ash, NDF, ADF, hemicellulose, cellulose, and lignin. We performed a nonlinear regression analysis. We determined biomass production with the estimated values and the percentage of each component. The goodness-of-fit indicators were: R², the coefficient of determination (R), and the model selection criterion (MSC). The parameters and goodness-of-fit coefficients were analyzed in ANOVA with the SAS software using the GLM procedure. Means were compared with Tukey's test. Results: The Maralfalfa cultivar presented a higher cellulose production (3,786 kg ha-1), similar (p>0.05) to the elephant grass and Taiwan cultivars, which presented values of 3,451 kg ha-1 and 3,329 kg ha-1, respectively, and different (p<0.05) from CT-115 and king grass, which produced more than 1 t ha-1 of cellulose. Limitations/implications: Cellulose production increased by the effect of fertilization. Findings/conclusions: The fertilized Maralfalfa, elephant grass, and Taiwan cultivars produced more than 4,000 kg ha-1 of cellulose, 3,000 kg ha-1 of hemicellulose, and 1,000 kg ha-1 of lignin. [ABSTRACT FROM AUTHOR]

Recycled paper fiber rejects have shown potential as a source of waste-to-resource carbohydrates for renewable chemicals production. This study examined three classes of recycled paper fines (old corrugated containers, old newspaper, and mixed office waste) and two industrial papermaking rejects streams from different recycling mills (one mill processes linerboard and the other old corrugated cardboard). The effect of chemical pretreatment using dilute sodium hydroxide, hot water and dilute sulfuric acid on enzymatic glucose and xylose yields was evaluated. Enzymatic hydrolysis results indicated that recycled fiber streams with more old corrugated cardboard have higher potential to produce carbohydrates. The recycled cardboard rejects produced more glucose and xylose per kilogram of rejects than the linerboard rejects under all untreated and pretreated conditions. The highest producing rejects sample was sodium hydroxide pretreated cardboard rejects with 373 g glucose and 61 g xylose produced per kilogram of rejects. However, a simple hot water pretreatment showed similar results, with 335 g glucose and 58 g xylose produced per kilogram of rejects. The hot water pretreatment is recommended due to its comparable yield and lower chemical addition. [ABSTRACT FROM AUTHOR]

Recycled paper fiber rejects have shown potential as a source of waste-to-resource carbohydrates for renewable chemicals production. This study examined three classes of recycled paper fines (old corrugated containers, old newspaper, and mixed office waste) and two industrial papermaking rejects streams from different recycling mills (one mill processes linerboard and the other old corrugated cardboard). The effect of chemical pretreatment using dilute sodium hydroxide, hot water and dilute sulfuric acid on enzymatic glucose and xylose yields was evaluated. Enzymatic hydrolysis results indicated that recycled fiber streams with more old corrugated cardboard have higher potential to produce carbohydrates. The recycled cardboard rejects produced more glucose and xylose per kilogram of rejects than the linerboard rejects under all untreated and pretreated conditions. The highest producing rejects sample was sodium hydroxide pretreated cardboard rejects with 373 g glucose and 61 g xylose produced per kilogram of rejects. However, a simple hot water pretreatment showed similar results, with 335 g glucose and 58 g xylose produced per kilogram of rejects. The hot water pretreatment is recommended due to its comparable yield and lower chemical addition.

Abstract With the rapid development of flexible electronics, new opportunities are opening up for paper-based electrodes. Herein, an integrated paper electrode consisting of homogeneously mixed cellulose fibers, activated carbon (AC), and carbon black is fabricated using cotton stalks as the raw material. Assembled from two such electrodes, the flexible supercapacitor exhibits high energy density, high power density, and outstanding cyclability. Remarkably, the thickness and AC mass loading of the paper electrode can be easily scaled up to commercial levels (610 µm and 9.8 mg cm−2), while still delivering great performances. Moreover, it is demonstrated that the replacement of AC with Ni-Co layered double hydroxide or Fe 2 O 3 can result in paper-based asymmetric supercapacitor with extremely high energy density (331 μW h cm−2 and 10.3 mW h cm−3), substantially outperforming conventional paper-based supercapacitors. The fabrication methodology of integrated paper electrodes in this report manifests great potential, offering a new vision for flexible energy storage. Graphical abstract fx1 Highlights • An integrated paper electrode is fabricated using cotton stalks as the raw material. • The paper is composed of homogeneously mixed cellulose fibers, AC, and CB. • The paper thickness and AC mass loading can be easily scaled up to commercial levels. • The flexible symmetric supercapacitor delivers favorable energy and power densities. • The paper-based asymmetric supercapacitor exhibits extremely high energy density. [ABSTRACT FROM AUTHOR]

The fundamentals of pyrolysis, its latest developments, the different conditions of the process and their relative residues are of great importance to evaluate the applicability of the pyrolysis process within the waste management sector and waste treatments. In particular the type of residues and their further use or treatment is of extreme interest as they could become the source of secondary raw material or generate beneficial influence in waste treatments. The main area of focus of this paper is the investigation of the link between the pyrolysis conditions, the chemical and mineralogical composition of their products and the benefits of pyrolysis in the waste management sector. More specific the paper covers the fast, intermediate and slow pyrolysis of organic and a mixture of inorganic/organic charge from households. The catalysts influence during fast pyrolysis on products yields and composition is not being considered in the review. [ABSTRACT FROM AUTHOR]

In view of the worldwide economic and environmental issues associated with the extensive use of petro-chemicals, there has been increasing research interest during the past decade in the value of residual biomass. Because of its renewable nature and abundant availability, residual biomass has attracted considerable attention as an alternate feedstock and potential energy source. To expand the range of natural bio-resources, significant progress related to the lignocellulose bio-technology has been achieved, and researchers have been re-directing their interests to biomass-based fuels, ligninolytic enzymes, chemicals, and biocompatible materials, which can be obtained from a variety of lignocellulosic waste materials. This review article focuses on the potential applications of lignocellulosic materials in biotechnology, including the production of bio-fuels, enzymes, chemicals, the pulp and paper, animal feed, and composites. [ABSTRACT FROM AUTHOR]

Abstract: Densified biomass pellets using waste wood sawdust (S) as main materials and wrapping paper fiber (P) as “solid bridge”, named as P/S-BPs, was prepared by a hydraulic press powder pelletizer under room temperature and pressure lower than10MPa. The effects of the addition of P to S and the compressed pressure on the density, resiliency (R), abrasion resistance (AR), impact resistance index (IRI)) and the combustion behavior of the P/S-BPs were investigated. The results showed that the addition of P to S greatly reduced the negative effects of resiliencies on the densities and mechanical properties of P/S-BPs during storage. For example, P/S-BPs compressed at 6MPa in a P/S mass ratio of 1–3 showed the smooth surface and low resiliency of 10% with a high relaxed density of 1.08kgm−3. This is due to the strengthened interlocking bonds through fabricating “solid bridge” and increasing attracting force by adding P to resist the disruptive force created by elastic recovery even under low pressure. Combustion results showed that the addition of P decreased the soot index (SI) due to the lower devolatilization rate and burnout rate, and increased the HHV per unit volume because of its high relaxed density. Thus, compression of waste P and S in a P/S mass ratio of 1–3 at room temperature under 6MPa is a cost-effective process to produce densified sustainable bio-fuel from waste S and P as well as dispose them. [Copyright &y& Elsevier]

Abstract: Purple nutsedge (Cyperus rotundus L.) is a serious weed capable of piercing polyethylene (PE) plastic mulch used in horticulture. A biodegradable plastic, PE and four different papers were tested for 2 years in fields highly-infested with C. rotundus in Zaragoza (Spain). All four papers were able to withstand all weed species. C. rotundus plants penetrated the biodegradable plastic mulch most, possibly because this material had least resistance to slow perforation. Differences in weed biomass between mulching materials were lower because of small size and weight of C. rotundus. Therefore all mulching treatments had a similar impact on weed biomass reduction 63 days after transplanting; biodegradable plastic had most biomass and papers the least, the differences being significant some years, only. Tomato yield was very similar for all mulching treatments and significantly higher than in the non-mulched plots. No effect of treatment was observed on fruit quality parameters. Commercial paper used as mulch without special additives can satisfactory control C. rotundus in processing tomato provided that climate is appropriate to maintain the paper dry during most of the time. Also the crop needs to cover the soil fast enough before the buried part of the mulch degrades allowing wind to lift and tear the mulch. [Copyright &y& Elsevier]

Abstract: In the present study the interactions between the main constituents of the refuse derived fuel (plastics, paper, and wood) during pyrolysis were studied. Binary mixtures of polyethylene-paper and polyethylene/sawdust have been transformed into pellets and pyrolyzed. Various mixtures with different composition were analyzed and pyrolysis products (tar, gas, and char) were collected. The mixtures of wood/PE and paper/PE have a different behavior. The wood/PE mixtures showed a much reduced interaction of the various compounds because the yields of pyrolysis products of the mixture can be predicted as linear combination of those of the pure components. On the contrary, a strong char yield increase was found at a low heating rate for paper/PE mixtures. In order to explain the results, the ability of wood and paper char to adsorb and convert the products of PE pyrolysis into was studied. Adsorption and desorption tests were performed on the char obtained by paper and wood by using n-hexadecane as a model compound for the heavy products of PE pyrolysis. [Copyright &y& Elsevier]

Abstract: In this paper, the prospect of integrating a combined paper&pulp mill with fuel production via biomass gasification was investigated. In the study, three different types of gasifiers (circulating fluidised bed, entrained flow and indirect gasification) and three fuel processes (dimethyl ether, methanol and Fischer-Tropsch wax synthesis) were investigated using computer simulations. The paper reports differences from the stand-alone cases and the integrated cases, using the electricity equivalence efficiency as a measure. Only 6 out of the 18 integrated cases studied displayed a positive result from integration and no obvious fuel selection that stand out as the most beneficial one, however the synthesis of dimethyl ether is, in combination with all gasifiers assessed a rather good choice, with an change in efficiency from integration ranging from −1% to 4%. Dimethyl ether is not the best choice if the electrical equivalence is to be maximised however. In this case the combination of circulating fluidised bed gasification and methanol synthesis should be pursued. The production of Fischer-Tropsch wax should according to the chosen measure not be produced; however there is an added value in the production of a non-oxygenated fuel which has not been taken into account in this particular study. All cases leads to a reduction of 0.4–0.9 kg CO2 per kg of dry biomass used in the process for fuel synthesis and the possibility to export bark is a more significant factor in this respect than which type of fuel is synthesised. [Copyright &y& Elsevier]

Abstract: The pulp and paper industry is placed in a unique position as biomass used as feedstock is now in increasingly high demand from the energy sector. Increased demand for biomass increases pressure on the availability of this resource, which might strengthen the need for recycling of paper. In this study, we calculate the energy use and carbon dioxide emissions for paper production from three pulp types. Increased recycling enables an increase in biomass availability and reduces life-cycle energy use and carbon dioxide emissions. Recovered paper as feedstock leads to lowest energy use (22GJ/t) and CO2 emissions (−1100kgCO2/t) when biomass not used for paper production is assumed to be converted into bio-energy. Large differences exist between paper grades in e.g. electricity and heat use during production, fibre furnish, filler content and recyclability. We found large variation in energy use over the life-cycle of different grades. However, in all paper grades, life-cycle energy use decreases with increased recycling rates and increased use of recovered fibres. The average life-cycle energy use of the paper mix produced in The Netherlands, where the recycling rate is approximately 75%, is about 14GJ/t. This equals CO2 savings of about 1tCO2/t paper if no recycled fibres would be used. [ABSTRACT FROM AUTHOR]

[Display omitted] • Pine needles lignocellulosic active paper incorporated with nanozeolite was fabricated. • The lignocellulosic paper showed improved water vapor transmission rate. • The lignocellulosic paper showed high ethylene scavenging properties. • Active pine needle based paper suitable for fresh produce active packaging. • Studies indicated valorization of pine needles biomass into paper fabrication. The pines needle falls approximately 2–3 ha−1 year−1 on the forest floors resulting in a considerable amount of lignocellulosic biowaste. The present study aimed to develop pine needles based lignocellulosic active paper and investigate the effect of 5, 20, and 30% (v/w) nano zeolite addition on the physical, mechanical, and microstructural property of the papers. The developed papers were characterized by scanning electron microscope, transmission electron microscope, Fourier transform infrared spectrometer, and X-ray diffraction. As the zeolite concentration was increased from 5% to 30% in the paper, enhanced water permeability was seen from 5.18 ± 0.34 - 3.88 ± 0.33 g/cm2/day (PN/ZL 30% paper). The addition of 5% zeolite increased the tensile and burst strength from 19.53 ± 3.53 Nm/g and 3.63 ± 0.23 kg/cm2, respectively. The porosity was increased from 340 ± 20 to 1170 ± 60, and Cobb value increased from 338.3 ± 1.5- 406.7 ± 1.5 g/m2. The alterations in terms of surface microstructure in the paper with 20, 30% zeolite were noticed whereas XRD illustrated the high compatibility among the lignocellulosic network of pines and zeolite. The pine needle paper with 30% zeolite possessed remarkable ethylene scavenging properties (62%), opening a way to valorize pine needle waste for food packaging application. [ABSTRACT FROM AUTHOR]