Search

Electroreduction of CO2 to C2+ products provides a promising strategy for reaching the goal of carbon neutrality. However, achieving high selectivity of C2+ products at high current density remains a challenge. In this work, we designed and prepared a multi‐sites catalyst, in which Pd was atomically dispersed in Cu (Pd−Cu). It was found that the Pd−Cu catalyst had excellent performance for producing C2+ products from CO2 electroreduction. The Faradaic efficiency (FE) of C2+ products could be maintained at approximately 80.8 %, even at a high current density of 0.8 A cm−2 for at least 20 hours. In addition, the FE of C2+ products was above 70 % at 1.4 A cm−2. Experiments and density functional theory (DFT) calculations revealed that the catalyst had three distinct catalytic sites. These three active sites allowed for efficient conversion of CO2, water dissociation, and CO conversion, ultimately leading to high yields of C2+ products. [ABSTRACT FROM AUTHOR]

Catalytic conversion of CO2 to produce fuels and chemicals is of great importance, and the electrocatalytic CO2 reduction reaction (eCO2RR) is considered one of the most attractive pathways. Multi-carbon (C2+) products are more desirable in many cases. To date, Cu-based catalysts, especially Cu+ sites, have been found to be the most efficient for the production of C2+ products. However, the retention of Cu+ sites at high cathodic potentials in the eCO2RR remains a great challenge. In this study, we designed and synthesized CuAl-oxide-derived (CuxAly-OD, x and y are the mass percentages of Cu and Al) catalysts for the eCO2RR to C2+ products. During the eCO2RR process, the predominant Cu species changed to Cu+, and the resulting electrocatalyst showed a high faradaic efficiency (FE) of 81.6% for C2+ products in alkaline aqueous solutions. Experimental studies showed that the presence of a stable amorphous Al2O3 phase stabilized the Cu+ sites by oxidation state control, leading to high selectivity and activity for the production of C2+ products. This work provides a strategy for improving the stability of Cu+ in the catalyst to enhance the performance of the eCO2RR. [ABSTRACT FROM AUTHOR]

Electroreduction of CO2 into valuable chemicals and fuels is a promising strategy to mitigate energy and environmental problems. However, it usually suffers from unsatisfactory selectivity for a single product and inadequate electrochemical stability. Herein, we report the first work to use cationic Gemini surfactants as modifiers to boost CO2 electroreduction to formate. The selectivity, activity and stability of the catalysts can be all significantly enhanced by Gemini surfactant modification. The Faradaic efficiency (FE) of formate could reach up to 96 %, and the energy efficiency (EE) could achieve 71 % over the Gemini surfactants modified Cu electrode. In addition, the Gemini surfactants modified commercial Bi2O3 nanosheets also showed an excellent catalytic performance, and the FE of formate reached 91 % with a current density of 510 mA cm−2 using the flow cell. Detailed studies demonstrated that the double quaternary ammonium cations and alkyl chains of the Gemini surfactants played a crucial role in boosting electroreduction CO2, which can not only stabilize the key intermediate HCOO* but also provide an easy access for CO2. These observations could shine light on the rational design of organic modifiers for promoted CO2 electroreduction. [ABSTRACT FROM AUTHOR]

Electrochemical reduction reaction of carbon monoxide (CORR) offers a promising way to manufacture acetic acid directly from gaseous CO and water at mild condition. Herein, we discovered that the graphitic carbon nitride (g‐C3N4) supported Cu nanoparticles (Cu−CN) with the appropriate size showed a high acetate faradaic efficiency of 62.8 % with a partial current density of 188 mA cm−2 in CORR. In situ experimental and density functional theory calculation studies revealed that the Cu/C3N4 interface and metallic Cu surface synergistically promoted CORR into acetic acid. The generation of pivotal intermediate −*CHO is advantage around the Cu/C3N4 interface and migrated *CHO facilitates acetic acid generation on metallic Cu surface with promoted *CHO coverage. Moreover, continuous production of acetic acid aqueous solution was achieved in a porous solid electrolyte reactor, indicating the great potential of Cu−CN catalyst in the industrial application. [ABSTRACT FROM AUTHOR]

Amorphous nano-metal catalysts often exhibit appealing catalytic properties, because the intrinsic linear scaling relationship can be broken. However, accurate control synthesis of amorphous nano-metal catalysts with desired size and morphology is a challenge. In this work, we discover that Cu(0) could be oxidized to amorphous CuxO species by supercritical CO2. The formation process of the amorphous CuxO is elucidated with the aid of machine learning. Based on this finding, a method to prepare Cu nanoparticles with an amorphous shell is proposed by supercritical CO2 treatment followed by electroreduction. The unique feature of this method is that the size of the particles with amorphous shell can be easily controlled because their size depends on that of the original crystal Cu nanoparticles. Moreover, the thickness of the amorphous shell can be easily controlled by CO2 pressure and/or treatment time. The obtained amorphous Cu shell exhibits high selectivity for C2+ products with the Faradaic efficiency of 84% and current density of 320 mA cm−2. Especially, the FE of C2+ oxygenates can reach up to 65.3 %, which is different obviously from the crystalline Cu catalysts. Amorphous metal catalysts often exhibit appealing catalytic properties, however, accurate control synthesis of amorphous nano-metal catalysts is a challenge. Here, the authors report a feasible strategy to prepare the amorphous Cu catalysts by supercritical CO2 treatment followed by electroreduction. The resulted catalyst shows high selectivity towards multi-carbon products for CO2 electroreduction. [ABSTRACT FROM AUTHOR]