Search

The determination of lactic acid content has a guiding significance for disease diagnosis or food supervision. Herein, a hydrogel-based three-dimensional photonic crystal (PC) sensor for specific detection of lactic acid is introduced. The hydrogel was prepared by one-step copolymerization of N-isopropylacrylamide and acrylamide in the presence of oxamate derivative 2-((6-acrylamidohexyl) amino)-2-oxoacetic acid (AOA). An obvious color change from orange-red to purple and a 45-nm redshift of the reflection peak were obtained in 3 min when lactic acid concentration increased from 0 to 20 mM. The detection limit was confirmed as 0.1 mM, and the prepared sensor can be reused more than 20 times. Moreover, the affinity and selectivity of AOA to lactic acid were proven by both the interaction energy from density functional theory (DFT) study and the comparison to those of pyruvate and propionic acid. This sensor was proven to be cost-effective and convenient with rapid response time, good reusability, and selectivity. [ABSTRACT FROM AUTHOR]

A colorimetric sulfur dioxide (SO2) gas sensor based on a core–shell composite was developed. The composite was fabricated with a silicon dioxide core and a mesoporous MCM-41 shell (SiO2@MCM-41), and further loaded with a mixture of zinc chloride (ZnCl2), sodium nitroprusside (SNP) and hexamine as an SO2 indicator. The sensing properties of SiO2@MCM-41 toward SO2 were measured in solid powder, discs and a gas detection tube (GDT), respectively. Each of these sensing configurations showed a distinct color change from pale yellow to red, which indicates good potential for naked-eye detection of SO2. The limit of detection (LOD) is 2 ppm for SiO2@MCM-41 discs, which indicates high sensitivity to SO2. The performance of GDT suggested a linear relationship between the SO2 concentration and the response length of the red portions in a range of 100–1000 ppm. This work shows promising potential of SiO2@MCM-41 as an easy, effective and rapid response sensing material for the in situ detection of SO2. [ABSTRACT FROM AUTHOR]

The application of fluorescent method to metal ions detection features high sensitivity, simple operation and real‐time monitoring. A 2,7‐dihydroxynaphthalene‐functionalized dimethyl glycoluril (called clip 1) was synthesized, using a relatively simple method. And it is fully characterized by 1H NMR, 13C NMR, HR‐MS and single crystal X‐ray diffraction. The recognition properties of molecular clip 1 were analyzed systematically toward several metal ions using fluorescence spectroscopy, and it was found that molecular clip 1 is selective and sensitive to Fe3+. At the same time, the clip 1 shows good anti‐interference ability when other metal ions existed. The limit detection of Fe3+ is 3×10−7M. The fluorescence of clip 1 was quenched apparently by Fe3+, which was speculated to be caused by ligand–metal charge transfer mechanism (LMCT). As a new fluorescence probe for Fe3+ ion, it may expanded the application of glycoluril molecular clips. [ABSTRACT FROM AUTHOR]

• Hydrogel sensor based on two-dimensional PS colloidal crystal array is developed. • The sensor achieves affinity by the interaction between polymer ligand and target. • The sensor shows high response, selectivity in buffers or body fluids. • It could be controlled by "temperature switch", exhibiting reusability to target It is significant to detect lysozyme both in fundamental research and in clinical practice, since its concentration in body fluid is associated with many diseases. In this study, a new kind of sensor for rapid screening the lysozyme was fabricated based on the two-dimensional (2D) polystyrene colloidal crystal array together with the optimized hydrogel containing acrylamide-based functional groups. Distinct hydrogel volume shrink was observed due to the hydrogel crosslink induced by the functional ligand–protein interactions while the protein bound to the sensor. Therefore, the analyte concentration could be accessed by of the lattice spacing of the 2D colloidal crystal array, which was detected by a change in the Debye diffraction ring diameter. The lysozyme concentration could be easily monitored by measuring the diameter of the Debye diffraction ring in the pathophysiologic range. The particle spacing of 2D colloidal crystal hydrogel sensor increased to about 22 nm while lysozyme concentration increased from zero to 1.0 mg/mL, meanwhile the structural color of the sensor blue shifted from red to yellow. The detection limit was confirmed as 1.38 × 10−3 mg/mL. The selective response to other common proteins in body fluids was also exhibited, indicating the great selective response properties to lysozyme. In addition, the 2D colloidal crystal hydrogel sensor was reusable to detect the lysozyme solution reversibly due to its thermal sensitivity. Moreover, the determination of lysozyme in artificial tears and human urine samples by this sensor demonstrated its feasibility in potential clinical analysis diagnosis. [ABSTRACT FROM AUTHOR]

[Display omitted] • A pH-responsive discoloration photonic crystal sensor was proposed for amniotic fluid recognition. • The sensor showed the high accuracy and sensitivity, rapid response and visual detection. • Compared with pH test paper, a noticeable color difference and extraordinary accuracy were obtained. In this study, we proposed a pH-responsive photonic crystal hydrogel sensor (PCHs) to conveniently and accurately recognize the amniotic fluid from urine of parturient women, which was constituted by three-dimensional polymethyl acrylamide (PMMA) array and optimized hydrogel. PMMA array was self-assembled by 180 nm monodispersed nanoparticles with vertical sedimentation method. The functional hydrogel containing N-acryloyl phenylalanine (APA), acrylamide (AM) and N, N'-methylene bis(acrylamide) (BIS) as co-monomer and crosslinking agent respectively, was photo-polymerized by the precursor under 365 nm UV light. This hydrogel significantly shrank or swelled corresponding to the acidity and alkalinity of the aqueous solution, which resulted in both the reflection peak position (λ max) of the prepared sensor and its structural color changing with the pH value. The λ max of PCHs redshifted from 514 nm to 606 nm in 60 s while the pH value of testing solution increased from 4.5 to 8.0, which exactly covered the pH value of amniotic fluid and urine. Correspondingly, its structure color gradually changed from pale-green to red ensuring their naked-eye determination. Furthermore, an extremely high sensitivity as 26.3 nm/pH of Δ λ max was obtained which was linearly related to pH value. The prepared sensor possessed steady accuracy and extraordinary sensitivity compared with the pH test strip which was generally used in amniorrhexis diagnosis nowadays besides the advantages of the low cost, simple operation, rapid response and visual detection mode. The reliability of this PCHs was further confirmed by the real sample detection which relative standard deviation was below 5.0 %, suggesting its potential clinical applications. [ABSTRACT FROM AUTHOR]

As a typical antibiotic that is harmful to the health of human beings and widely used in animal husbandry, oxytetracycline (OTC) has a potential threat to the food safety. Therefore, the design of portable sensors for efficiently monitoring trace amounts of OTC in foods is vital to maintain safe food supply in our daily life. Herein, a two-dimensional (2D) molecularly imprinted photonic crystal hydrogel (MIPCH) sensor for the detection of OTC was fabricated by combining the photonic crystal (PC) method and molecular imprinting technique. In this regard, OTC was used as imprinted template to form the MIPCH sensor with specific binding sites during polymerization. After the removal of template, the obtained MIPCH possessed the specific nanocavities that were complementary to target compound, OTC. In addition, the response of the MIPCH to tetracyclines (TCs) in aqueous solution was monitored through a readable change of Debye diffraction ring, which is related to the particle spacing variation of MIPCH in response to the target molecules. As the concentration of OTC increased from 0 to 60 μM, the particle spacing of MIPCH sensor increased to about 94 nm and the structural color redshifted from blue to red. More importantly, the detection of OTC in milk sample by this portable, cost-effective MIPCH sensor has also been achieved at the same range of OTC. With the increasing concentration of OTC in milk sample, the particle spacing of MIPCH sensor increased about 92 nm and the structural color of MIPCH changed from blue through green to orange. Image 1 • A novel 2D molecularly imprinted PC was developed for the fast screening of trace level residues of OTC in milk. • The detection could be realized by naked eyes through observing the diffraction ring or structural color. • The sensor also showed advantages in easy preparation and specificity towards the targets. [ABSTRACT FROM AUTHOR]

The detection of the human immunodeficiency virus-1 (HIV) at an early stage is vital and could be realized through its cell surface glycoprotein-120 (gp120) without virus preprocessing. Here, we present an ssDNA-aptamer-linked photonic crystal (APC) hydrogel sensor for HIV detection which is comprised of photonic crystals (PCs) made of polystyrene nanoparticles embedded in the polyacrylamide hydrogel. ssDNA aptamers specific for gp120 are crosslinked in the hydrogel which can selectively bind to gp120 by hydrogen bonding increasing the PCs particle spacing and swelling of the hydrogel. The binding response can be visually monitored as a color change due to the diffraction of light from PCs and can eventually be measured (1–1000 ng mL−1 of gp120) and 100 to 108 VP mL−1 of HIV by the Debye's ring diameter or a UV/Vis spectrometer. APC-hydrogel can be regenerated by Tris-HCl and EDTA washing buffer system. The sensor demonstrates LOD of 7.1 ± 1.55 ng mL−1 for gp120 and 4 VP mL−1 for the whole HIV, a rapid response of 5 min, reusability up to 70 % (in fifth use), and recovery of 95.4 ± 0.1 % to 99.0 ± 0.2 % in plasma samples. The sensor is cost-effect and stable compared to antibody-based sensors and can be utilized to develop point-of-care testing (POCT) devices for HIV diagnosis. [Display omitted] • A novel ssDNA aptamer linked photonic crystal sensor for rapid, sensitive, and onsite quantitative detection of HIV. • Specific binding of the aptamer to gp120 results in reversible swelling of the hydrogel. • Photonic crystals embedded in the polyacrylamide hydrogel provide a vibrant optical response visible to the naked eye. [ABSTRACT FROM AUTHOR]

This research demonstrated that, in a colorimetric sensor array, 2,4,6-trinitrotoluene (TNT), 2,6-dinitrotoluene (2,6-DNT), 2,4-dinitrotoluene (2,4-DNT) and 4-nitrotoluene (4-MNT) were identifiable through a unique pattern in a qualitative and semi-quantitative manner. The adsorption capacity of the molecularly imprinted colloidal particles (MICs) for their corresponding templates was 0.27 mmol TNT/g, 0.22 mmol 2,6-DNT/g, 0.31 mmol 2,4-DNT/g and 0.16 mmol 4-MNT/g, respectively. Every optical sensor utilized in the arrays contained three-dimensional molecularly imprinted photonic crystal (MIPC) sensor with different imprinted templates. The intelligent materials can display different colors from green to red to 20 mM corresponding nitroaromatics with varying diffraction red shifts of 84 nm (TNT), 46 nm (2,6-DNT), 54 nm (2,4-DNT) and 35 nm (4-MNT), respectively. With the assistance of principal component analysis (PCA) and rational design, the sensor array can illustrate the influence of the nitryl quantity and generate a separate response region of nitroaromatics for pattern recognition with 95.25% of variance explained in the measurements by the first three principal components (PCs). The statistical analysis endowed the cross-reactive array with better classification and identification ability and this novel detection platform provided a wider applied range among other harmful chemicals in a simple sensor array with customized functionality. [ABSTRACT FROM AUTHOR]

• A rapid self-assembly method was proposed to prepare the 3D-photonic crystal (PhC). • The effect of microspheres, heating and nitrogen blowing have been also studied. • Using this method, a p-nitrophenol-molecular imprinted PhC sensor was prepared. To overcome the long period of three-dimension photonic crystal colloidal array preparation, a rapid self-assembly method is proposed. The effect of microspheres diameter and concentration, heating and nitrogen blowing have been also studied. According to the results, when the microspheres suspension concentration is 0.2 wt% and heating temperature of 70 °C, a highly regular 3D face-centered cubic colloidal crystal array structure self-assembles on the gas-liquid interface within 3 min. Then using this method, a p-nitrophenol-molecular (p-NP) imprinted photonic crystal sensor with high selectivity and sensitivity is prepared. The p-NP imprinted sensor presents twice signal intense than the non-imprinted sensor towards the target, and the structural color changes from blue to green. Meanwhile, the sensor responds in 3 min and can be reversible more than 9 times. This rapid self-assembly method provides a suitable way for large-area colloidal photonic crystal preparation with higher efficiency and good repeatability, which has a high value for practical applications. [ABSTRACT FROM AUTHOR]