Search

The rapid acquisition of high-resolution spatial distribution of soil organic matter (SOM) at the field scale is essential for precision agriculture. The UAV imaging hyperspectral technology, with its high spatial resolution and timeliness, can fill the research gap between ground-based monitoring and remote sensing. This study aimed to test the feasibility of using UAV hyperspectral data (400–1000 nm) with a small-sized calibration sample set for mapping SOM at a 1 m resolution in typical low-relief black soil areas of Northeast China. The experiment was conducted in an approximately 20 ha field. For calibration, 20 samples were collected using a 100 × 100 m grid sampling strategy, while 20 samples were randomly collected for independent validation. UAV captured hyperspectral images with a spatial resolution of 0.05 × 0.05 m. The extracted spectra within every 1 × 1 m were then averaged to represent the spectra of that grid; this procedure was also performed across the whole field. Upon applying various spectral pretreatments, including absorbance conversion, multiple scattering correction, Savitzky–Golay smoothing filtering, and first-order differentiation, the absolute maximum values of the correlation coefficients of the spectra for SOM increased from 0.41 to 0.58. Importance analysis from the optimal random forest (RF) model showed that the characterized bands of SOM were located in the 450–600 and 750–900 nm regions. When the RF model was used, the UAV hyperspectra data (UAV-RF) were able to successfully predict SOM, with an R2 of 0.53 and RMSE of 1.48 g kg−1. The prediction accuracy was then compared with that obtained using ordinary kriging (OK) and the RF model based on proximal sensing (PS-RF) with the same number of calibration samples. However, the OK method failed to predict the SOM accuracy (RMSE = 2.17 g kg−1; R2 = 0.02) due to a low sampling density. The semi-covariance function was unable to describe the spatial variability of SOM effectively. When the sampling density was increased to 50 × 50 m, OK successfully predicted SOM, with RMSE = 1.37 g kg−1 and R2 = 0.59, and its results were comparable to those of UAV-RF. The prediction accuracy of PS-RF was generally consistent with that of UAV-RF, with RMSE values of 1.41 g kg−1 and 1.48 g kg−1 and R2 values of 0.57 and 0.53, respectively, which indicated that SOM prediction based on UAV-RF is feasible. Additionally, compared with the PS platforms, the UAV hyperspectral technology could simultaneously provide spectral information of tens or even hundreds of continuous bands and spatial information at the same time. This study provides a reference for further research and development of UAV hyperspectral techniques for fine-scale SOM mapping using a small number of samples. [ABSTRACT FROM AUTHOR]

Abstract Previous studies on soil organic carbon content or stock mapping mostly use natural environmental covariates and do not consider the soil management practice factor. However, human activities have become an important influencing factor for soil organic carbon, especially for agricultural soils. Crop species/crop rotations and management practices significantly affect the amount and spatial variation of soil organic carbon in croplands, but have not been considered for mapping soil organic carbon. In this study, we used direct crop rotation information and variables generated using Fourier transform on HJ-1A/1B NDVI time series data to capture the periodic effect of crop rotation, and explored the effectiveness of incorporating such information in predicting topsoil organic carbon content in cropland. A case study applied such method in a largely agricultural area in Anhui province, China. Crop rotation information was obtained through field investigation. Various combinations of predictive environmental variables were experimented for mapping soil organic carbon. The results were validated using field samples. Results showed that the combination of natural environment variables with both crop rotation type and variables derived through Fourier transform yielded the highest accuracy. In addition, only using the Fourier decomposed variables and crop rotation information were able to achieve a similar accuracy with using only soil formative natural environmental variables. This indicates that crop rotation information has comparable predictive power of soil organic carbon as natural environment variables. This study demonstrates the effectiveness of including agricultural practice information in digital soil mapping in agricultural landscapes with differences in crop rotation. Highlights • Variables indicating agricultural practice were derived using Fourier transform from NDVI time series. • Addition of Fourier decomposed variables and crop rotation type improved SOC content mapping. • Crop rotation information has comparable predictive power of SOC as natural environment variables. • Fourier decomposition was demonstrated to be as useful as crop rotation type in predicting SOC. • The study demonstrates the effectiveness of including agricultural practice information in SOC mapping. [ABSTRACT FROM AUTHOR]

Existing sample data are important for digital soil mapping. Different sample points possess different representativeness. The representativeness of samples influences the soil mapping result greatly. However, few study focus on assessing the representativeness of single sample. In this paper, we proposed a method to identify representative samples from existing samples collected from multiple resources. The basic idea of the method was to use clusters of environmental covariates to approximate types of soil variations, and check the occupancy of the existing samples in centroids of environmental clusters. Those samples locating in typical locations or centroids of environmental clusters were considered as representative samples. In this paper, the proposed method was used to discern representative samples in 282 soil samples in Anhui Province, China. SOM content was mapped using a similarity based mapping method. Two cases with different training samples (representative samples, non-representative samples, and training samples including representative and non-representative samples) and validation samples were set to compare the mapping results and accuracies. The results showed that the SOM content maps predicted using representative training samples had generally higher accuracy than the results produced using non-representative samples, and comparative accuracies with the results produced using full training samples. To discern representative samples is helpful for understanding the soil-landscape relationships in an area and the proposed method can be used to design supplementary samples for a better soil mapping result. Mapping results and accuracies showed that different training and validation sample sets impacted the mapping results and accuracies greatly, which indicates that researchers should be cautious when using randomization to obtain training and validation subsets for soil mapping. [ABSTRACT FROM AUTHOR]

The present regression models in digital soil mapping usually assume that relationships between soil properties and environmental variables are always fixed (as in MLR) or varying (as in GWR) in geographical space. In reality, some of the environmental variables may be fixed in affecting soil property variation and some are local varying. In this study, a mixed geographically weighted regression (MGWR) method which can deal with fixed and varying spatial relationships between a target variable and its environmental variables were proposed and used to predict topsoil soil organic matter (SOM) concentration in two study areas (Heshan, Heilongjiang province and Xuancheng, Anhui province, China) at two scales. Three groups of sample sets were created based on the total samples in the study areas to evaluate the robustness and stability of the model. Multiple linear regression (MLR), geographically weighted regression (GWR), GWR-kriging (GWRK), local regression-kriging (LRK), kriging with an external drift (KED), and ordinary kriging (OK) were used for comparison with MGWR. The validation results showed that the use of MGWR reduced the RMSE of GWR by 10.5% and 7.6% on average, reduced the RMSE of MLR by 12.8% and 9.9% on average for Heshan and Xuancheng study areas respectively. MGWR also showed a good competitiveness when compared with GWRK, LRK, KED and OK. In Heshan study area, the influence of flow length, relative position index, foot slope and distance to the nearest drainage were constant, whereas the elevation, topographic wetness index and valley index showed different influence in different regions. In Xuancheng study area, the fixed environmental variables were profile curvature, topographic wetness index and slope, whereas the varying environmental variables were precipitation, temperature, elevation, and limestone. The results indicate that the accuracy of predictions can be improved by adaptive coefficient according to the variation of environmental variables as implemented in MGWR compared with others considering only the local or global relationships. It was concluded that mixed geographically weighted regression model could be a potential method for digital soil mapping. [ABSTRACT FROM AUTHOR]

Abstract: Fuzzy membership function is an effective tool to represent relationship between soil and environment for predictive soil mapping. Usually construction of a fuzzy membership function requires knowledge on soil-landscape relationships obtained from local soil experts or from extensive field samples. For areas with no soil survey experts and no extensive soil field observations, a purposive sampling approach could provide the descriptive knowledge on the relationships. However, quantifying this descriptive knowledge in the form of fuzzy membership functions for predictive soil mapping is a challenge. This paper presents a method to construct fuzzy membership functions using descriptive knowledge. Construction of fuzzy membership functions is accomplished based on two types of knowledge: 1) knowledge on typical environmental conditions of each soil type and 2) knowledge on how each soil type corresponds to changes in environmental conditions. These two types of knowledge can be extracted from catenary sequences of soil types and the associated environment information collected at a few field samples through purposive sampling. The proposed method was tested in a watershed located in Heshan farm of Nenjiang County in Heilongjiang Province of China. A set of membership functions were constructed to represent the descriptive knowledge on soil-landscape relationships, which were derived from 22 field samples collected through a purposive sampling approach. A soil subgroup map and an A-horizon soil organic matter content map for the area were generated using these membership functions. Forty five field validation points were collected independently to evaluate the two soil maps. The soil subgroup map achieved 76% of accuracy. The A-horizon soil organic matter content map based on the derived fuzzy membership functions was compared with that derived from a multiple linear regression model. The comparison showed that the soil organic content map based on fuzzy membership functions performed better than the soil map based on the linear regression model. The proposed method could also be used to construction membership functions from descriptive knowledge obtained from other sources. [Copyright &y& Elsevier]