Search

To improve the performance of thrusters by using two permanent ring-shaped magnets to push a magnetic field downward, we propose an annular–cylindrical combined-channel Hall thruster and numerically study its performance. The results indicate that, compared with simple annular channels, the annular–cylindrical combined channel can effectively increase the neutral gas density contained within it and increase the degree of ionization, efficiency, thrust, and specific impulse. Moreover, the sputtering zone of discharge channel is in front of the permanent magnets, i.e., wall erosion occurs upon ion bombardment during discharge. However, ions cannot bombard the permanent magnetic rings, thus guaranteeing a constant magnetic field and long discharge lifetime. [ABSTRACT FROM AUTHOR]

The use of krypton in the field of electric propulsion has become a key research topic owing to its high specific impulse and high reserves. However, because krypton has features such as a small ionization cross section and high ionization energy, its ionization performance is relatively low, thereby increasing the actual specific impulse loss of the krypton Hall thruster in comparison with its theoretical value. Therefore, to use of krypton as the propellant of the Hall thruster instead of xenon, it is necessary to study the optimization of its ionization process. In this study, a gas distributor with a rotating propellant supply mode is designed, considering factors such as the velocity and density of the velocity of neutral atoms, which affects the ionization process. The distribution of neutral atom parameters in the discharge channel is changed by the rotation; and its influences on the propellant ionization and other performance parameters of the Hall thruster are experimentally analyzed with respect to the magneto-ampere, volt-ampere, and flow rate-ampere characteristics. The results demonstrate that the rotating propellant supply reduces the axial velocity of neutral atoms, increases the density and circumferential motion distance, and thus improves the ionization efficiency of the krypton Hall thruster. Furthermore, the performance parameters, such as thrust and efficiency, are also improved, and the plume divergence angle is reduced. When the discharge voltage is 450 V and the anode flow rate is 60 sccm, the rotating propellant supply can increase the anode efficiency of the axial propellant supply mode from 46.2% to 53.2%. However, the plume divergence half-angle reduces from 39.2° to 35.5°. In addition, an increase in the anode flow rate and discharge voltage continuously increases the performance promotion in the rotating propellant supply mode. • Rotating propellant supply is achieved by a particular gas distributor design. • Rotating propellant supply slows down krypton neutrals inside the channel and improves ionization efficiency. • Performance increment under rotating propellant supply increases with both discharge voltage and krypton flow rate. [ABSTRACT FROM AUTHOR]

Abstract The reliability of cathode is critical to electric propulsion systems. Although researchers have carried out many life tests on hollow cathode, the discharge current is almost steady when the cathode is independently tested for life. Actually, when it is coupled with the thruster, the discharge current is with large amplitude low-frequency oscillation. Therefore, we suggest a new external circuit for a cathode-independent life test, which could simulate the characteristics of discharge current oscillation when the cathode is coupled with Hall thruster. We carried out 160 h of life test using the normal external circuit and the new external circuit, and the variation characteristics of the cathode orifice area are also studied during the life test. The results show that under the normal external circuit, the growth rate of the cathode orifice area initially increases and then decreases gradually with the increase of the time of life test, whilst the cathode orifice area in the new external circuit linearly increases. The new external circuit can provide a new method to simulate the discharge current oscillation when the cathode is coupled with Hall thruster during the independent life test of the cathode. [ABSTRACT FROM AUTHOR]

Hall thrusters generally use a U-shaped insulated wall to form an annular discharge channel. As high-power and high-specific-impulse Hall thrusters develop, the disadvantages of this conventional topology—in terms of material and mechanical strength, processing, and manufacturing—are gradually being exposed. Therefore, in this study, a new wall material was employed, and its effects were investigated numerically and experimentally. A boron nitride ceramic wall was retained in the strong discharge area owing to its excellent secondary electron emission characteristics; while a metallic wall was applied upstream of the channel, forming a segmented hybrid wall. A Hall thruster with an aft-loaded magnetic field, which offers a long lifetime, was adopted for this study. The particle-in-cell simulation shows that the length of the metallic wall has a significant impact on thruster performance. The same trend was observed in the experiments. Under the optimal metallic wall length, the anode efficiency is improved by approximately 4% compared to that of the ceramic-wall-only case. The physics involved is analyzed and qualified by comparing the simulated and measured results. The findings of this study provide valuable guidance for the optimal design of high-power, high-specific-impulse Hall thrusters. • Metal-ceramic hybrid channel wall improves high-voltage performance of Hall thrusters. • Optimal length of metallic segment exists and is strongly related to magnetic field. • Too long metallic segment augments electron wall loss and then ionization loss. [ABSTRACT FROM AUTHOR]

Electric propulsion systems with high-specific impulses have replaced chemical propulsion systems in many space missions. The aft-loaded magnetic field technology of Hall thrusters moves the ionization and acceleration processes downstream of the channel by varying the magnetic field distribution. Consequently, ion bombardment of the channel walls is inhibited, and the service life of the Hall thrusters is substantially increased. However, neutral gas leaks because of the rapid diffusion near the channel outlet, where strong ionization occurs. Thus, the propellant atoms are ionized insufficiently, resulting in a decline in the performance. Therefore, an aft-loading design for the neutral gas flow field was developed to optimization distribution of the neutral gas in this study. A 1.5 kW Hall thruster was verified experimentally. The experimental results show that the aft-loaded neutral gas flow field significantly improved the ionization and acceleration processes. The propellant utilization efficiency increased by 4–8% within the discharge voltage range of 300–900 V. The ion energy distribution moved toward the high-energy direction significantly, promoting an overall improvement in the performance, with a thrust increase of 7.3–11.5 %. The anode efficiency increased from 49–57 % to 58–61 %. The results of this study are significant for the design of high-performance, long-life Hall thrusters. • The aft-loading design of gas flow is realized using the special topology of the hybrid-wall Hall thruster. • The ionization distribution of aft-loaded neutral gas flow field is concentrated in higher potential region. • The aft-loaded neutral gas flow moves the ionization region downstream of the channel. [ABSTRACT FROM AUTHOR]

The inward deflection of the excitation magnetic field was found in a Hall thruster voltage-varying experiment. The influence of Hall current magnitude and radial distribution on the total magnetic field was analyzed through magnetic field simulations. The probable reason why the excitation magnetic field deflected inward evidently at high discharge voltages (＞600 V) was obtained by combining the simulation results and theoretical analysis. This study provides qualitative guidance on the design of the excitation magnetic field in high-specific-impulse Hall thrusters. • Hall current induces an outward deflected magnetic field. • Magnitude and asymmetry of Hall current have an equivalent effect on magnetic field deflection. • An inward deflected excitation magnetic field is necessary to obtain a symmetrical total field. [ABSTRACT FROM AUTHOR]