Search

Abstract Fullerenes have been widely used as the electron transport layers (ETL) for planar-heterojunction perovskite solar cells (PSCs), due to their superior abilities in electron transporting, hysteresis suppression and low-temperature processing. Here, we demonstrate a novel inverted PSC with evaporated C 60 as ETL and dopant-free copper phthalocyanine (CuPc) as hole transport layer (HTL). The C 60 ETL can not only transport photogenerated electrons, but also passivate grain boundaries and surfaces of perovskite films effectively. By optimizing the thickness of the C 60 ETL, a champion power conversion efficiency (PCE) of 16.72% is obtained with almost no hysteresis and less than 10% decay in efficiency is observed during a two-week stability test. To the best of our knowledge, this is the highest efficiency of the inverted PSCs employing CuPc as HTL. For comparison, the devices using PCBM as ETL are also prepared and only achieve a highest efficiency of 15.74%. Various characterizations and analyses attest the enhanced charge transport and extraction as well as suppressed charge recombination and hysteresis for the C 60 -based devices. Since all the processes are accomplished under a low temperature, this enable us to fabricate flexible PSCs on polyethylene terephthalate (PET) substrates with a highest PCE of 12.96%. Our work provides a new strategy for fabricating cost-effective, highly efficient and hysteresis-free flexible PSCs in mass production. Graphical abstract Novel efficient C 60 -based inverted perovskite solar cells with negligible hysteresis are demonstrated. A champion power conversion efficiency (PCE) of 16.72% and 12.96% is obtained for the devices prepared on rigid and flexible substrates, respectively. Image 1 Highlights • Novel inverted perovskite solar cells (PSCs) with Cu-phthalocyanine and C 60 as HTL and ETL, respectively. • 16.72% efficiency is obtained, which is the highest efficiency of the inverted PSCs employing CuPc as HTL. • 12.96% efficiency is obtained for the flexible device. • Almost no hysteresis is observed. • Cost-effective, easy to prepare and highly stable. [ABSTRACT FROM AUTHOR]

Flexible perovskite solar cells (PSCs) such as inverted PSCs are gaining increasing attention due to their wide range of potential applications, while the selection of stable, high conductivity and energy level suitable hole transport layers (HTLs) is still challenging. Here we introduce dopant-free copper phthalocyanine (CuPc) as HTL in inverted planar PSCs, and demonstrate improved photovoltaic performance and increased stability with high reproducibility and uniformity compared to the PEDOT:PSS based devices. The champion efficiency of PSCs is achieved by 15.4% on rigid substrates and 12.8% on flexible substrates, respectively. The flexible devices also exhibit excellent bending stability, retaining ∼85% of the original power conversion efficiency (PCE) after 3000 bending cycles at r = 5 mm without encapsulation. Our study provides a new strategy for fabricating cost-effective, scalable and flexible PSCs with high efficiency, little hysteresis, and excellent stability. [ABSTRACT FROM AUTHOR]