Search

Using Si as anode materials for Li-ion batteries remain challenging due to its morphological evolution and SEI modification upon cycling. The present work aims at developing a composite consisting of carbon-coated Si nanoparticles (Si@C NPs) intimately embedded in a three-dimensional (3D) graphene hydrogel (GHG) architecture to stabilize Si inside LiB electrodes. Instead of simply mixing both components, the novelty of the synthesis procedure lies in the in situ hydrothermal process, which was shown to successfully yield graphene oxide reduction, 3D graphene assembly production, and homogeneous distribution of Si@C NPs in the GHG matrix. Electrochemical characterizations in half-cells, on electrodes not containing additional conductive additive, revealed the importance of the protective C shell to achieve high specific capacity (up to 2200 mAh.g−1), along with good stability (200 cycles with an average Ceff > 99%). These performances are far superior to that of electrodes made with non-C-coated Si NPs or prepared by mixing both components. These observations highlight the synergetic effects of C shell on Si NPs, and of the single-step in situ preparation that enables the yield of a Si@C-GHG hybrid composite with physicochemical, structural, and morphological properties promoting sample conductivity and Li-ion diffusion pathways. [ABSTRACT FROM AUTHOR]

We report the transformation of electronic structures of sp2 graphene to sp3 graphene by UV-light-assisted oxidation. Two distinctive oxidation mechanisms were observed during this metal-insulator transition: (i) At low-oxidation regime, p-doping behavior by oxygen species extracting electrons from graphene and (ii) at high-oxidation regime, n-doping behavior by electron-hopping via strongly localized oxide states. We also found that the dominant oxygen-related functional group by UV-light-assisted oxidation was an epoxide group rather than hydroxyl group, which differed from conventional graphite oxide. [ABSTRACT FROM AUTHOR]

The interfacing of polyoxometalates and graphene can be considered to be an innovative way to generate hybrid structures that take advantage of the properties of both components. Polyoxometalates are redox-sensitive and photosensitive compounds with high temperature stability (up to 400 °C for some), showing tunable properties depending on the metal incorporated inside the complex. Graphene has a unique electronic band structure combined with good material properties for electrical and optical applications. The spontaneous, rather than electrochemical, functionalization of epitaxial graphene on SiC with Keggin phosphomolybdate derivative TBA3[PMo11O39{Sn(C6H4)CC(C6H4)N2}] (named KMoSn[N2+]) bearing a phenyl diazonium unit is investigated. Graphene decoration is evidenced by means of AFM, Raman, XPS, and cyclic voltammetry, indicating a successful immobilization of the polyoxomolybdate. The covalent bonding of the polyoxometalate to the graphene substrate can be deduced from the appearance of a D band in the Raman spectra and from the loss of mobility in the electrical conduction. High-resolution XPS spectra reveal an electron transfer from the graphene to the Mo complex. The comparison of charge-carrier density measurements before and after grafting supports the p-type doping effect, which is further evidenced by work function UPS measurements. [ABSTRACT FROM AUTHOR]

Abstract: We report on the fabrication of completely uniform monolayer graphene on a metal thin film over a 150mm Si substrate at a low temperature of 600°C by inductively coupled plasma-enhanced chemical vapor deposition (ICPCVD). Through novel use of bimetallic catalyst such as CuNi and AuNi alloys we were able to control catalytic reaction at the metal surface and grow complete monolayer graphene with a Ni content less than 20at.%. We also found that the 2D/G intensity ratio in the Raman spectra was almost invariant with growth time and the C 1s peak in the XPS spectra was observed only at the metal surface. This implies that monolayer graphene was possibly grown on these Ni-doped copper and gold catalysts by a self-limiting surface reaction under our CVD condition. From DFT calculations, it was shown that the catalytic activity of normally inactive Cu and Au could be enhanced through the addition of Ni atoms at surface sites, providing graphene growth at lower temperatures than pure Cu or Au. The carrier mobility of graphene films grown on these CuNi and AuNi alloy catalyst was measured to be over 9000cm2 V−1 s−1 at room temperature, which is comparable to that of CVD graphene film grown on Cu foil. Therefore, we suggest an efficient way in growing a complete monolayer graphene on thin films at low temperatures, which could be a key issue in the application of graphene devices. [Copyright &y& Elsevier]