Search

This paper proposes increasing the width of the discharge channel to improve the specific impulse of Hall thrusters. In our study, we significantly increased the achievable channel width by optimizing the magnetic circuit topology, and the design freedom of the Hall thruster was improved. A prototype of a wide-channel high-specific-impulse Hall thruster was designed and experimentally verified. The effects of channel width on the discharge process and the characteristics of an aft-loaded magnetic field Hall thruster were investigated. The high-intensity luminous region did not diffuse radially with an increase in the channel width, and the plasma was always concentrated near the channel centerline. A wider channel is more conducive for improving the propellant utilization efficiency, thereby effectively improving the specific impulse of the Hall thruster. By optimizing the discharge channel width, the upper limit of the discharge voltage was increased, and the maximum specific impulse was increased from 3170 to 3794 s, a relative improvement of 20%. The effect of the specific impulse improvement at the same discharge voltage was analyzed and discussed. The results of this study are significant for the design of high-specific-impulse Hall thrusters. [ABSTRACT FROM AUTHOR]

Using a permanent magnet to realize a design with a large height-radius ratio can effectively reduce the radial size of the thruster. The experimental results show that a Hall thruster with a large height-radius ratio also has significant advantages in its discharge performance. Taking the 1.35 kW Hall thruster HEP-1350PM, which has a large height-radius ratio, as an example, the thrust, specific impulse, and efficiency of HEP-1350PM are increased by up to 4.3%, 10.4%, and 7%, respectively, as compared to SPT-100, while its weight is only 56% of that of SPT-100. Numerical simulations were performed to understand the discharge characteristics of a Hall thruster with a large height-radius ratio and the internal mechanism of its performance improvement. The results show that the small middle diameter and wide channel structure concentrate the distribution of the neutral gas in the channel, accelerate the decrease of the propellant density along the axial direction, and move the main ionization zone closer to the channel upstream. These factors increase the ionization concentration, ionization rate peak, working medium utilization rate, and voltage utilization rate. They also reduce the ion loss on the wall surface and plume divergence, thereby improving the comprehensive discharge performance. This study verifies the feasibility of a large height-radius ratio in the design of a Hall thruster, and demonstrates that the design would not only be valuable for reducing the volume and weight of the thruster, but also has the advantages of enhancing its discharge performance and prolonging its working life. • Large height-radius ratio design can reduce the volume and weight of the thruster. • A large height-radius ratio can improve the discharge performance of the thruster. • Hall thruster with a large height-radius ratio has a higher acceleration efficiency. [ABSTRACT FROM AUTHOR]

With the development of electric space propulsion and all-electric propulsion technologies, the application range of the Hall effect thruster (HET) has gradually expanded. As an important part of the HET, the magnetic field plays a decisive role in its performance. In the development of versatile HETs, it is necessary to comprehensively and thoroughly understand the effects of the magnetic field on the HET discharge characteristics. In this paper, a HEP-100X thruster with multiple degrees of freedom in terms of magnetic field control is used to study the effects of the peak magnetic field position on the thruster discharge characteristics. The results indicate that the peak magnetic field position can effectively control the main ionization zone position and affect the ionization rate. The thruster has the best comprehensive discharge performance when the peak magnetic field position is located near the channel exit. Further analysis reveals that the performance improvement is mainly due to the reduced ion loss on the wall surface and plume divergence half-angle, and the increased current utilization efficiency and voltage utilization efficiency. The HEP-100X shows the above trends under various flow conditions, and the anode efficiency is the highest when the anode flow is 50 sccm. In this condition, the propellant is sufficiently ionized and the ion loss on the wall surface is small. This research provides the necessary support for a comprehensive understanding of the role and significance of the magnetic field in the thruster discharge process, and has important significance for the design optimization of multifunctional Hall thrusters and subsequent research. [ABSTRACT FROM AUTHOR]

This paper experimentally evaluated the effect of the disruption of the symmetrical distribution of the propellant on the characteristics of the anode current. The change in the asymmetry degree of the propellant distribution is achieved by supplying gas with a dual-cavity gas distributor. The results show that as the asymmetry degree increases, the magnitude of the anode current changes monotonically from a slow growth to a rapid growth, while the peak-to-peak value of the anode current exhibits a non-monotonic behavior. A preliminary analysis shows that the asymmetrical distribution of the propellant causes a nonuniform plasma generation along the azimuthal direction and consequently the appearance of an azimuthal electric field. The effect of the azimuthal electric field on the electron azimuthal drift as well as the induction of the electron axial drift are key factors that account for the change of the anode current and its oscillation. • Transition in discharge current occurs as propellant asymmetry degree increases. • Transition point drops down as propellant flow rate or discharge voltage increases. • Azimuthal electric field induced by asymmetrical discharge accounts for transition. [ABSTRACT FROM AUTHOR]

Traditional Hall thrusters can ionize gas inside the channel and accelerate ions outside it by moving the peak magnetic field out of the channel, which improves the thruster performance. In this study, the effects of the peak magnetic field location on the discharge characteristics of a 100-W Hall thruster with large-gradient magnetic field were investigated by changing the ratio of the magnetic field intensity at the channel exit to the peak magnetic field intensity (Br exit /Br max). The experimental results show that the discharge performance decreases significantly when Br exit /Br max < 1. Moreover, the PIC numerical simulation and neutral gas simulation results demonstrate that the ionization rate inside the channel reduces and the ionization proportion outside the channel increases when Br exit /Br max decreases, thereby reducing the performance. When Br exit /Br max = 1, under the anode flow of 5.5 sccm and discharge voltage of 250 V, the thrust, anode specific impulse, propellant utilization efficiency, and anode efficiency of the 100-W thruster were 6.4 mN, 1210 s, 68.9%, and 38.5%, respectively, which represent respective improvements of 16.2%, 16.4%, 13.0%, and 30.0% (relative value) compared with the condition when Br exit /Br max = 0.9. These results provide a reference for the performance optimization of 100-W Hall thrusters with a large-gradient magnetic field. • The Effects of peak magnetic field location on performance of a 100W large gradient magnetic field Hall thruster is studied. • The ionization and discharge performance parameters of thruster under different Br exit /Br max conditions are given. • When the value of Br exit /Br max decreases from 1, the overall performance of the thruster decreases significantly. • The decrease of Br exit /Br max worsens the ionization process and reduces the overall performance of the thruster. [ABSTRACT FROM AUTHOR]

Poor performance limits the wider application of 100-W-power class Hall thrusters. The effects of position matching between the anode and the zero-magnetic-field region (ZMFR) on the discharge process and performance improvement of 100-W Hall thrusters were investigated. The experimental results demonstrate that appropriately widening the ZMFR downstream of the anode improves the ion current and thrust, promotes plume focusing, and optimizes thruster performance. The thrust and anode efficiency is enlarged by 7.6 % and 20 % (relative value), respectively, when the ZMFR downstream of the anode is expanded by 0.2 L (L is the channel length). The simulation results indicated that widening the ZMFR promoted the expansion of the high-ionization zone to the bottom of the channel, and increased the overall ionization rate. Moreover, as the ZMFR increases, the effective ion acceleration voltage increases. However, widening the ZMFR also aggravated the ion-wall interaction and reduced the propellant utilization rate. Therefore, the performance of the thrusters exhibited an optimal range as the length of the ZMFR increased. In addition, increasing the ZMFR did not affect the life of the thrusters. • The effects of position matching between the anode and zero magnetic field region on discharge characteristics are studied. • The discharge characteristic parameters of thruster with different lengths of ZMFR downstream of the anode are given. • Appropriately increasing the ZMFR can improve the ion current and thrust, thereby improving the anode efficiency. • The position matching between the anode and ZMFR affects the ionization process and propellant utilization ratio. [ABSTRACT FROM AUTHOR]