Search

This paper proposes increasing the width of the discharge channel to improve the specific impulse of Hall thrusters. In our study, we significantly increased the achievable channel width by optimizing the magnetic circuit topology, and the design freedom of the Hall thruster was improved. A prototype of a wide-channel high-specific-impulse Hall thruster was designed and experimentally verified. The effects of channel width on the discharge process and the characteristics of an aft-loaded magnetic field Hall thruster were investigated. The high-intensity luminous region did not diffuse radially with an increase in the channel width, and the plasma was always concentrated near the channel centerline. A wider channel is more conducive for improving the propellant utilization efficiency, thereby effectively improving the specific impulse of the Hall thruster. By optimizing the discharge channel width, the upper limit of the discharge voltage was increased, and the maximum specific impulse was increased from 3170 to 3794 s, a relative improvement of 20%. The effect of the specific impulse improvement at the same discharge voltage was analyzed and discussed. The results of this study are significant for the design of high-specific-impulse Hall thrusters. [ABSTRACT FROM AUTHOR]

Hall thrusters generally use a U-shaped insulated wall to form an annular discharge channel. As high-power and high-specific-impulse Hall thrusters develop, the disadvantages of this conventional topology—in terms of material and mechanical strength, processing, and manufacturing—are gradually being exposed. Therefore, in this study, a new wall material was employed, and its effects were investigated numerically and experimentally. A boron nitride ceramic wall was retained in the strong discharge area owing to its excellent secondary electron emission characteristics; while a metallic wall was applied upstream of the channel, forming a segmented hybrid wall. A Hall thruster with an aft-loaded magnetic field, which offers a long lifetime, was adopted for this study. The particle-in-cell simulation shows that the length of the metallic wall has a significant impact on thruster performance. The same trend was observed in the experiments. Under the optimal metallic wall length, the anode efficiency is improved by approximately 4% compared to that of the ceramic-wall-only case. The physics involved is analyzed and qualified by comparing the simulated and measured results. The findings of this study provide valuable guidance for the optimal design of high-power, high-specific-impulse Hall thrusters. • Metal-ceramic hybrid channel wall improves high-voltage performance of Hall thrusters. • Optimal length of metallic segment exists and is strongly related to magnetic field. • Too long metallic segment augments electron wall loss and then ionization loss. [ABSTRACT FROM AUTHOR]

The inward deflection of the excitation magnetic field was found in a Hall thruster voltage-varying experiment. The influence of Hall current magnitude and radial distribution on the total magnetic field was analyzed through magnetic field simulations. The probable reason why the excitation magnetic field deflected inward evidently at high discharge voltages (＞600 V) was obtained by combining the simulation results and theoretical analysis. This study provides qualitative guidance on the design of the excitation magnetic field in high-specific-impulse Hall thrusters. • Hall current induces an outward deflected magnetic field. • Magnitude and asymmetry of Hall current have an equivalent effect on magnetic field deflection. • An inward deflected excitation magnetic field is necessary to obtain a symmetrical total field. [ABSTRACT FROM AUTHOR]

In recent years, high-voltage and high-specific-impulse Hall thrusters are being developed. However, the efficiency of the Hall thruster does not increase monotonically with the discharge voltage, but reaches peak at an intermediate voltage, which limits the ability of high-voltage Hall thruster. Previous studies indicate that the sharp increase of the wall energy loss at high voltages dominates the occurrence of the efficiency peak. Therefore, a peak-pushed-outside (PPO) magnetic field is designed in this study, which is expected to diminish the wall energy loss. Experimental results show that the PPO magnetic field can push the propellant ionization and acceleration process downstream, reduce the wall energy deposition at high voltages effectively, and therefore improve the efficiency peak value and increase the voltage corresponding to the efficiency peak. This is helpful to enlarge the high-voltage operation range of Hall thrusters. However, the discharge oscillation rises up significantly at high voltages, and the thruster performance degrades at low voltages, which requires further investigation. • Peak-pushed-outside magnetic field reduces wall energy deposition in Hall thrusters greatly. • Peak-pushed-outside magnetic field promotes the efficiency peak and the corresponding discharge voltage in Hall thrusters. • Peak-pushed-outside magnetic field is suitable for high-voltage Hall thrusters. [ABSTRACT FROM AUTHOR]