Search

Bovine serum albumin (BSA) imprinted polyampholyte hydrogels (PAHs) were prepared by free radical polymerization using acrylamide (Am) as structural monomer, N-isopropylacrylamide (NIPAm), [2-(methacryloyloxy)ethyl]trimethylammonium chloride (DMC) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) as functional monomers and N,N'-methylenebisacrylamide (MBA) as crosslinker in aqueous solution. The morphology of imprinted hydrogels and non-imprinted hydrogels were characterized by scanning electron microscope (SEM). The adsorption and recognition properties were evaluated as functions of Am monomer concentration, NIPAm/Am molar ratio, crosslinking structure and charge density ratio etc. The adsorption capacity and association constant of specific interaction between hydrogel and template protein were analyzed by Langmuir isotherm model and Freundlich model. The fitting experimental data suggested that this adsorption was better described as a monolayer adsorption. The specific adsorption on hydrogel with different crosslinking structure was investigated by selective binding BSA from single solution and binary mixture solution. The charge density ratio in molecular imprinting hydrogel had obvious influence for protein adsorption and recognition. The resultant of regeneration tests showed that elution had large impact on deterioration of the imprinting structure., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Vinyl group capped urethane acrylate (UA) was prepared with diisocyanate (IPDI), hydroxyethyl methacrylate (HEMA) and dimethylolpropionic acid (DMPA). The UA was grafted onto sodium alginate via free-radical polymerization with KPS/Na2SO3 as initiator and then crosslinked by Ca(2+). Grafted polymers (UA-g-CaA) were characterized by FT-IR, SEM, TGA, XRD and tension gauge. The swelling behavior was also investigated. It is found that urethane acrylate grafted calcium alginate possesses lower swelling degree and is improved in thermal stability as well as mechanical performance. The reason is that hydrophobic urethane acrylate provides alginate with physical crosslinking and forms partial crystal regions. The optimum condition for synthesis of UA-g-CaA with lower swelling degree is that weight percentage of initiator to monomer is 0.8%, mass ratio of reductant to oxidant is 0.45:1, monomer concentration is 0.0385mol/L and grafting reaction temperature is 55°C., (Copyright © 2015 Elsevier B.V. All rights reserved.)

As the core component of wearable electronic devices, flexible energy storage materials play an irreplaceable role. At present, it is still a challenge to prepare flexible electrode materials with high energy density. In this paper, a polyaniline‐based composite flexible conductive hydrogel (PPG‐P) with a two‐level conductive network is successfully prepared by a secondary induced assembly in situ polymerization method. The special conductive structure greatly promotes the efficiency of charge transfer and the utilization of electroactive substances, so that PPG‐P exhibits excellent electrochemical performance. In a three‐electrode system, PPG‐P has a mass‐specific capacitance as high as 989 F g−1 (0.5 A g−1). After 1000 charge and discharge cycles, the capacitance retention is 87%. Symmetrical flexible supercapacitors based on PPG‐P have high specific capacitance (176 F g−1/0.5 A g−1) and high energy density (15.6 Wh kg−1). After 1000 cycles of constant current charge and discharge, the capacitance maintains 78.1%. The preparation of PPG‐P with a hierarchical structure demonstrates the possibility of achieving high energy density in flexible electrode materials, which has great application potential in the development of energy storage elements in wearable devices. [ABSTRACT FROM AUTHOR]

With the development of alternatives to traditional fossil energy and the rise of wearable technology, flexible energy storage devices have attracted great attention. In this paper, a polyaniline/poly(acrylamide‐sodium acrylate copolymer) hydrogel (PASH) with high flexibility and excellent electrochemical properties for flexible electrodes is fabricated by freeze‐thaw‐shrink treatment of a highly water‐absorptive hydrogel, together with in‐situ polymerization of aniline at a low aniline concentration (0.1 mol L−1). The PASH exhibits a conductivity of 4.05 S m−1 and an elongation at break of 1245%. The freeze‐thaw‐shrink treatment greatly improves the electrochemical performance and stability of the conductive PASH. The area specific capacitance of PASH reaches 849 mF cm−2 and the capacitance maintains 89% after 1000 galvanostatic charge–discharge cycles. All the raw materials are conventional industrialized materials and no additional templating agent is needed during the entire synthesis process. This study provides a cost‐efficient approach for the fabrication of conductive polymer hydrogels, which has a broad application prospect in flexible energy storage electronic devices. [ABSTRACT FROM AUTHOR]

This work is an exploration into visualizing measurement of putrescine specific adsorption by photographing colorized molecule imprinting chromogenic hydrogel. Membranes are prepared with imitate templates 1,4-butylene glycol, adipic acid or succinic acid, respectively and ninhydrin is used as chromogenic agent for target molecule putrescine. The adsorbing concentration on MIP is reflected in the form of visible violet-colored stain differed in shape and shade, which are recorded by hyper spectral camera and proceeded into intuitive 3D isohypse surfaces plot. By quantifying the height of surface peaks, imprinting efficiency is estimated in accordance with polyvinyl alcohol concentration and crosslinking degree. The imprinting efficiency of three imitate molecule templates is also discussed. [ABSTRACT FROM AUTHOR]

Bovine serum albumin imprinted polyethylene glycol 600 (PEG600) grafted Calcium alginate (CaA) hydrogel microspheres were prepared and characterized. The adsorption and recognition properties of PEG600 grafted calcium alginate (CaA- g-PEG600) microspheres were evaluated and the results showed that the crosslinking structure of CaA- g-PEG600 microspheres exerted an obvious effect on the adsorption capacity and imprinting properties for bovine serum albumin. The adsorption isotherms and recognition properties indicated that the imprinted modified microspheres had excellent rebinding affinity toward target proteins and the imprinting efficiency varied according to PEG600 grafting degree. The adsorption capacity and the imprinting factor were 5.5 mg g and 3.6, respectively. Adsorption kinetics of CaA- g-PEG600 microspheres in accordance with the molecular weight between crosslinks ( Mc) was investigated and the structural influence on protein selective rebinding was discussed. Furthermore, the binary solution separation performance of CaA- g-PEG600 microspheres with different Mc was investigated by selective binding bovine serum albumin from protein mixture solution. [ABSTRACT FROM AUTHOR]

ABSTRACT Protein-imprinted polyurethane-grafted calcium alginate hydrogel microspheres were prepared and characterized. The samples were investigated with optical microscopy, scanning electron microscopy, 13C-NMR, and Fourier transform infrared spectroscopy. We proved that polyurethane side chains were successfully grafted, and this led to a relatively rough and dense surface. The samples exhibited better swelling durability when applied in specific adsorption tests. The adsorption kinetic and recognition properties indicated that the imprinted modified microspheres had excellent rebinding affinity toward the target proteins. Moreover, the influence of the preassembly pH, rebinding pH, and grafting ratio on the adsorption capacity and imprinting efficiency (IE) were systematically investigated. The study results suggest that the modified samples possessed a higher IE toward the target protein under the optimum pH and grafting ratio. Upon polyurethane grafting modification, the alginate hydrogel microspheres showed improved mechanical stability and recognition specificity. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42140. [ABSTRACT FROM AUTHOR]

Polyurethane grafted calcium alginate hydrogel microspheres intended for bovine serum albumin imprinting were prepared and characterized. The grafting modification was performed prior to the assembling of protein template with hydrogel, which was advantageous to maintain protein conformation and construct more accessible imprinted sites. It was found that the imprinted hydrogel had higher affinity to template molecules after modification. Investigations of grafting ratio influence on specific rebinding and competitive properties indicated that grafted side chains were beneficial to the selective recognition of protein. [ABSTRACT FROM AUTHOR]

Abstract: Polyurethane was synthesized by the reaction of isophorone diisocyanate, 2-hydroxyethyl methacrylate and diethylene glycol. Then polyurethane grafted calcium alginate gel material was prepared via free-radical grafting polymerization with azobisisobutyronitrile as an initiator. Modified calcium alginate hydrogel was improved in thermal property, crystallinity and anti-swelling properties. The reason is that polyurethane side chains affect the arrangement of calcium alginate by forming highly ordered crystal region. [Copyright &y& Elsevier]

Poly vinyl acetate grafted calcium alginate hydrogel microspheres were prepared with bovine serum albumin (BSA) as molecular template. The microspheres exhibited homogeneous and core-shell structure according to different preparation strategy. The rebinding and swelling property of microspheres showed responsiveness toward ionic strength, temperature, and pH. It was found the highest separation factor of 1.85 and imprinting efficiency of 1.75 when the Ca2+ ionic strength was 1.25 and 0.34 mol/kg, respectively. The separation factor was found decreased as temperature grew from 29 to 45°C while the imprinting efficiency reached a peak value at about 37°C. Separation factor of BSA imprinted microspheres at different pH was also recorded and two peaks were found, which were considered to be caused by the similar swollen state due to ionic and covalent crosslinking structure of modified microspheres. The recognition responsiveness is suggested to be influenced by environmental effects due to the changing in imprints' configuration at different swollen states. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 [ABSTRACT FROM AUTHOR]

Agarose hydrogel microspheres imprinted with bovine serum albumin (BSA) were prepared by inverse suspension gelating method. The experimental conditions related with beads’ shape and uniformity were studied, including temperature, surfactant content, and stirring speed. The size and distribution of the pores were found related with porogen and surfactant content. Rebinding properties were influenced by the diameter and porosity. The beads with the smallest diameter exhibited the greatest rebinding capacity, rebinding speed, and imprinting efficiency (IE). Smaller pores provided higher rebinding capacity and IE, but lower rebinding speed. Imprinted microspheres showed good specificity toward templating protein compared to others. [ABSTRACT FROM AUTHOR]

Abstract: With the aim of improving the performance of calcium alginate (Ca-Alg) hydrogel, a small quantity (5% of dry mass of sodium alginate) of hydroxyethyl cellulose (HEC) was used to associate sodium alginate to form interpenetrating networks (IPNs). Swelling results and mechanical stability tests showed that the formation of IPNs considerably restrained dried samples from swelling in 0.9% sodium chloride aqueous solution and reinforced the mechanical strength of microspheres. For emulsion droplets as template, microscopy showed that the original emulsion templating method employed in preparation of macroporous Ca-Alg microspheres was also applicable in the IPNs system. As for bovine serum albumin molecules as template, Alg/HEC microspheres showed a better recognition effect than that of Ca-Alg microspheres. The reduced network mesh size and strengthened cross-linkages in IPNs are responsible for these results. [Copyright &y& Elsevier]