Search

Semiconductor nanocrystals (NCs) possess unique photoluminescent properties which can be used to design fluorescence probes for chemo/biosensing applications. Several have recently emerged that offer excellent turn-on or ratiometric fluorescence chemosensory protocols by sophisticated procedures, but it has been challenging to realize all of these advantages in a single construct. Herein, we develop an intrinsic dual-emitting Mn-doped ZnS nanocrystal-based probe that achieves this goal with turn-on and ratiometric fluorescence response for the determination of organophosphate (diethylphosphorothioate, DEP). The probe relies on the modification of dopamine dithiocarbamate on the surface of NCs and the modulation of dual emission through a photoinduced electron transfer process, which makes use of red fluorescence of Mn(2+) ions doped in the NCs as specific recognition for the target analyte and blue defect emission of the NCs as stable internal reference. In presence of DEP, the red emission of the probe is thus enhanced by switching off the electron transfer pathway, while the blue emission is almost unchanged. With the addition of different amounts DEP, the two emission intensity ratios gradually vary and display color changes from dark-blue to purple to red. Thus, this method generates turn-on and ratiometric fluorescence signals for quantitative and visual detection of the analyte. Significantly, the dual-emitting probe has been used to fabricate paper-based test strips for visual detection of DEP residues, which validate the method for its rapid, on-site, and visual identification.

We have developed a selective upconversion switching method for the ratiometric fluorescence detection of nitrite using upconversion nanoparticles (UCNPs) and an efficient nitrite reaction. The green emission (λ(em) = 539 nm) of NaYF4:Yb(3+),Er(3+) nanoparticles can be selectively quenched by the neutral red (NR) dye due to the spectral overlap between the emission at 539 nm and the absorption of NR, while its red emission (λ(em) = 654 nm) remains unchanged. Nitrite reacts specifically and strongly with NR to form diazonium salt and lose the diazonium group, which sharply decreases the absorption of NR. Thus, the green emission of NaYF4:Yb(3+),Er(3+) can be recovered by increasing the amount of nitrite, leading to visible color changes from red to orange-yellow and finally green under excitation at 980 nm. The increase in the ratio of emission intensities (I539/I654) is quantitatively correlated to the concentration of nitrite ions. Moreover, the developed method has been successfully applied to nitrite detection in real samples such as drinking water, natural water and meat foods. In particular, the upconversion sensors can efficiently avoid background optical interference and thus show potential for the detection of nitrite salts in complex samples.

To convert the binding events on molecularly imprinted polymers (MIPs) into physically detectable signals and to extract the templates completely are the great challenges in developing MIP-based sensors. In this paper, a core-shell nanostructure was employed in constructing the MIP chemosensor for the improvements of template extraction efficiency and imprinted sites accessibility. Vinyl-substituted zinc(II) protoporphyrin (ZnPP) was used as both fluorescent reporter and functional monomer to synthesize atrazine-imprinted polymer shell at silica nanoparticle cores. The template atrazine coordinates with the Lewis acid binding site Zn of ZnPP to form a complex for the molecular imprinting polymerization. These imprinted sites are located in polymer matrix of the thin shells (~8 nm), possessing better accessibility and lower mass-transfer resistance for the target molecules. The fluorescence properties of ZnPP around the imprinted sites will vary upon rebinding of atrazine to these imprinted sites, realizing the conversion of rebinding events into detectable signals by monitoring fluorescence spectra. This MIP probe showed a limit of detection (LOD) of about 1.8 μM for atrazine detection. The core-shell nanostructured MIP method not only improves the sensitivity, but also shows high selectivity for atrazine detection when compared with the non-molecular imprinted counterparts.

This paper reports the preparation of metsulfuron-methyl (MSM) imprinted polymer layer-coated silica nanoparticles toward analysis of trace sulfonylurea herbicides in complicated matrices. To induce the selective occurrence of surface polymerization, the polymerizable double bonds were first grafted at the surface of silica nanoparticles by the silylation. Afterwards, the MSM templates were imprinted into the polymer-coating layer through the interaction with functional monomers. The programmed heating led to the formation of uniform MSM-imprinted polymer layer with controllable thickness, and further improved the reproducibility of rebinding capacity. After removal of templates, recognition sites of MSM were exposed in the polymer layers. As a result, the maximum rebinding capacity was achieved with the use of optimal grafting ratio. There was also evidence indicating that the MSM-imprinted polymer nanoparticles compared with nonimprinted polymer nanoparticles had a higher selectivity and affinity to four structure-like sulfonylurea herbicides. Moreover, using the imprinted particles as dispersive solid-phase extraction (DSPE) materials, the recoveries of four sulfonylurea herbicides determined by high-performance liquid chromatography (HPLC) were 80.2-99.5%, 83.8-102.4%, 77.8-93.3%, and 73.8-110.8% in the spiked soil, rice, soybean, and corn samples, respectively. These results show the possibility that the highly selective separation and enrichment of trace sulfonylurea herbicides from soil and crop samples can be achieved by the molecular imprinting modification at the surface of silica nanoparticles., (2010 Elsevier B.V. All rights reserved.)

This paper reports the preparation of high density imprinted layer-coated silica nanoparticles toward selective recognition and fast enrichment of chlorpyrifos (CP) from complicated matrices. The molecularly imprinted polymers (MIPs) were successfully coated at the surface of modified silica through using the chemical immovable vinyl groups at the nanoparticles' surface, followed by the graft copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) in the presence of templates CP. It has been demonstrated that the space of end vinyl groups at the surface of silica can be controlled by changing the condition of chemical modification, regulating the thickness of imprinted shells and the density of efficient imprinted sites. After removal of templates by solvent extraction, the recognition sites of CP were created in the polymer coating layer. The CP-imprinted nanoparticles exhibited high recognition selectivity and binding affinity to CP analyte. When the CP-imprinted nanoparticles were used as dispersive solid-phase extraction (dSPE) materials, the high recovery yields of 76.1-93.5% from various spiked samples with only 1microg/mL analyte were achieved by one-step extraction. These results reported herein provide the possibility for the separation and enrichment of CP from complicated matrices by the molecular imprinting modification at the surface of common silica nanoparticles.

This paper reports a reversible dual fluorescence switch for the detection of a proton target and 2,4,6-trinitrotoluene (TNT) with opposite-response results, based on fluorophore derivatization of silica nanoparticles. Fluorescent silica nanoparticles were synthesized through modification of the surface with a nitrobenzoxadiazole (NBD) fluorophore and an organic amine to form a hybrid monolayer of fluorophores and amino ligands; the resultant nanoparticles showed different fluorescence responses to the proton target and TNT. Protonation of the amino ligands leads to fluorescence enhancement due to inhibition of photoinduced electron transfer (PET) between the amine and fluorophore. By contrast, addition of TNT results in fluorescence quenching because a fluorescence resonance energy transfer (FRET) happens between the NBD fluorophore and the formed TNT-amine complex. The fluorescence signal is reversible through washing with the proper solvents and the nanoparticles can be reused after centrifugal separation. Furthermore, these nanoparticles were assembled into chips on an etched silicon wafer for the detection of TNT and the proton target. The assembled chip can be used as a convenient indicator of herbicide (2,4-dichlorophenoxyacetic acid) and TNT residues with the use of only 10 microL of sample. The simple NBD-grafted silica nanoparticles reported here show a reversible signal and good assembly flexibility; thus, they can be applied in multianalyte detection.

Mn2+-doped ZnS nanocrystals with an amine-capping layer have been synthesized and used for the fluorescence detection of ultratrace 2,4,6-trinitrotoluene (TNT) by quenching the strong orange Mn2+ photoluminescence. The organic amine-capped nanocrystals can bind TNT species from solution and atmosphere by the acid-base pairing interaction between electron-rich amino ligands and electron-deficient aromatic rings. The resultant TNT anions bound onto the amino monolayer can efficiently quench the Mn2+ photoluminescence through the electron transfer from the conductive band of ZnS to the lowest unoccupied molecular orbital (LUMO) of TNT anions. The amino ligands provide an amplified response to the binding events of nitroaromatic compounds by the 2- to approximately 5-fold increase in quenching constants. Moreover, a large difference in quenching efficiency was observed for different types of nitroaromatic analytes, dependent on the affinity of nitro analytes to the amino monolayer and their electron-accepting abilities. The amine-capped nanocrystals can sensitively detect down to 1 nM TNT in solution or several parts-per-billion of TNT vapor in atmosphere. The ion-doped nanocrystal sensors reported here show a remarkable air/solution stability, high quantum yield, and strong analyte affinity and, therefore, are well-suited for detecting the ultratrace TNT and distinguishing different nitro compounds.

This paper reports that extremely strongly coupled excitonic states were formed in H-aggregated monocrystalline nanosheets and semicrystalline nanowires of coplanar organic molecules of 2,5-bis(4-methoxybenzylidene) cyclopentanone, due to the highly regular face-to-face stacking of molecular excitons. It was demonstrated that the spectral absorption and fluorescence emission behaviors are dependent on the routes of molecular aggregation and the ordered degree of molecular arrangement in aggregated nanoparticles. In particular, the H-type aggregation of molecules through a highly ordered molecular arrangement in the monocrystalline nanosheets led to the formation of a new exciton coupling state with an energy band higher than that in normal semi-/noncrystalline H-aggregation. A strong symmetric absorption at higher energy bands was thus observed in the solution of nanosheets. Furthermore, the strongly coupled excitonic state may hold all the oscillator strength, leading to the extinction of the original intramolecular electronic transitions of individual molecules and the appearance of new strong absorption and fluorescence emissions at high-energy bands. These results show a perspective that the ability to control the molecular structure and its arrangement in aggregates holds promise for creating novel optical properties in molecular materials.

In this paper, we report a simple polypeptide-directed strategy for fabricating large spherical assembly of CaCO(3) nanoparticles. Stepwise growth and assembly of a large number of nanoparticles have been observed, from the formation of an amorphous liquidlike CaCO(3)-polypeptide precursor, to the crystallization and stabilization of polypeptide-capped nanoparticles, and eventually, the spherical assembly of nanoparticles. The "soft" poly(aspartate)-capping layer binding on a nanoparticle surface resulted in the unusual soft nature of nanoparticle assembly, providing a reservoir of primary nanoparticles with a moderate mobility, which is the basis of a new strategy for reconstructing nanoparticle assembly into complex nanoparticle architectures. Moreover, the findings of the secondary assembly of nanoparticle microspheres and the morphology transformation of nanoparticle assembly demonstrate a flexible and controllable pathway for manipulating the shapes and structures of nanoparticle assembly. In addition, the combination of the polypeptide with a double hydrophilic block copolymer (DHBC) allows it to possibly further control the shape and complexity of the nanoparticle assembly. A clear perspective is shown here that more complex nanoparticle materials could be created by using "soft" biological proteins or peptides as a mediating template at the organic-inorganic interface.

A separate two-step process with a rapid nucleation and a subsequent template-directed growth has been employed to synthesize uniform Ag nanoparticles, which avoids a classical un-refrained ripening process resulting in a wide size distribution. Some silver nanocrystallites prepared by this approach are particularly interesting because of their unusual nanostructures with multiple nanostripes caused by stacking faults. [Copyright &y& Elsevier]

Abstract In recent years, copper nanoclusters (Cu NCs) have attracted a great deal of research interests, because the fluorescence intensity will be significantly enhanced after they aggregate, which makes them an ideal material for constructing chemical sensors. The current Cu NCs based sensor researches focus mainly on the control of surface modification and aggregation conditions. Herein, we report a method for direct detection of Cu2+ ions through in situ cluster formation and aggregation. Glutathione was used as both reducing agent and stabilizing agent, while tetrahydrofuran as the poor solvent. When the analyte of Cu2+ ions were added to the mixed solution, they were reduced and aggregated to generate bright orange emission. The method is easy to operate and the reaction complete within 2 min. The detection limit for Cu2+ ions is as low as 0.17 μM. Based on these findings, we successfully achieved the determination of copper content in naturally occurring mineral. Therefore, the method reported here provides a convenient and sensitive way to perform qualitative analysis of Cu2+ ions. Highlights • A rapid and sensitive method for Cu2+ ions detection was developed. • The method was based on the formation and aggregation of Cu nanoclusters. • Glutathione was used as both reducing agent and stabilizing agent, while tetrahydrofuran as the poor solvent. • Proposed method has been successfully applied in naturally occurring mineral. [ABSTRACT FROM AUTHOR]

Thiolate-protected gold nanoclusters with high chemical stability are exploited extensively for fundamental research and utility in chosen applications. Here for the first time, the controlled destabilization of extraordinarily stable thiolated gold clusters for the growth of single-crystalline gold nanoparticles (AuNPs) is demonstrated, which was achieved simply via the oxidation of surface-protecting thiolates into disulfides by hydrogen peroxide under basic condition. By combining with our experimental observations over the entire destabilization and growth process, the new growth mechanism from clusters to AuNPs is revealed by density functional theory (DFT) calculations. It is found that the size of AuNPs decreases with the increase of hydrogen peroxide concentration due to the generation of more nuclei at the higher hydrogen peroxide concentrations. In addition, the preparation of AuNPs is tuned by changing the concentration of hydrogen peroxide, and they are self-assembled into microspheres via an evaporation-mediated process, which can induce strong plasmonic coupling between adjacent AuNPs for ultrasensitive surface-enhanced Raman scattering detection. The present work demonstrates a facile route to functionalize and engineer AuNPs via controlling the reaction conditions and the ratio of precursors, and thus bring new possibilities for using more clusters as precursors to construct novel nano/microstructures for various applications. [ABSTRACT FROM AUTHOR]

The real applications of Na 3 V 2 (PO 4 ) 3 cathode material for sodium batteries have been hindered by low-cost and facile synthesis method. Herein, we report a facile self-combustion method to synthesize Na 3 V 2 (PO 4 ) 3 nanoparticles coated with carbon shell (NVP/C). Using as the cathode, the NVP/C is capable of delivering the initial discharge and charge capacities of 100.72 and 111.3 mAh g −1 at the current of 0.1 C in a voltage of 2.5–3.8 V, and the capacity retention of the sample is approximately 95% of its initial specific capacity after 50th cycles. The first-principles simulation results show that the Na ions migration route prefers between two adjacent tetrahedral sites with the vacancy-hopping mechanism in a curved way, with the lowest activation energy of 0.292 eV. The diffusion coefficients D Na + at room temperature was also calculated as higher as 2.38 × 10 −9 cm 2 s −1 . The results suggest great potential of self-combustion synthesized NVP/C as cathode materials for Na-ion batteries. [ABSTRACT FROM AUTHOR]

Abstract: Trace penicilloic acid allergen frequently leads to various fatal immune responses to many patients, but it is still a challenge to directly discriminate and detect its residue in penicillin by a chemosensing way. Here, we report that silver-coated gold nanoparticles (Au@Ag NPs) exhibit a structure-selective hot-spot Raman enhancement capability for direct identification and detection of trace penicilloic acid in penicillin. It has been demonstrated that penicilloic acid can very easily link Au@Ag NPs together by its two carboxyl groups, locating itself spontaneously at the interparticle of Au@Ag NPs to form strong Raman hot-spot. At the critical concentration inducing the nanoparticle aggregation, Raman-enhanced effect of penicilloic acid is ~60,000 folds higher than that of penicillin. In particular, the selective Raman enhancement to the two carboxyl groups makes the peak of carboxyl group at C6 of penicilloic acid appear as a new Raman signal due to the opening of β-lactam ring of penicillin. The surface-enhanced Raman scattering (SERS) nanoparticle sensor reaches a sensitive limit lower than the prescribed 1.0‰ penicilloic acid residue in penicillin. The novel strategy to examine allergen is more rapid, convenient and inexpensive than the conventional separation-based assay methods. [Copyright &y& Elsevier]