Search

In recent years, jamming strategies for Synthetic Aperture Radar (SAR) pertaining to target detection and identification, such as the creation of false targets, electromagnetic (EM) deception, and signal spoofing, have been increasingly emphasized. Distinct from traditional SAR jamming approaches, the introduction of an innovative artificial material cloak in SAR target jamming presents augmented capabilities. These methods demonstrate a proficient redirection of incident EM waves in specific or arbitrary directions, effectively masking the vital information linked to critical targets. This study introduces a broadband SAR target jamming system employing an information metasurface that incorporates intelligent information processing algorithms in conjunction with a space-time-coding digital metasurface, endowing it with the capacity to adeptly modulate incident EM waves. This integration facilitates a versatile approach to jamming, enabling the deployment of multi-mode protective measures against critical targets. The conducted simulation and experiment results validate the system's ability to adjustably produce EM deception and generate multiple false targets independently of the SAR system. The outcomes of this research significantly advance the practicality of SAR protection strategies, pushing the boundaries toward more dynamic, broadband, and controllable scenarios, thereby substantially improving the concealment of critical targets in highly sensitive conflict areas. [ABSTRACT FROM AUTHOR]

High-resolution and high-squint spaceborne spotlight synthetic aperture radar (SAR) has significant potential for extensive application in remote sensing, but its swath width effectiveness is constrained by a critical factor: severe range cell migration (RCM). To address this, pulse repetition interval (PRI) variation offers a practical scheme for raw data reception. However, the current designs for continuously varying PRI (CV-PRI) exhibit high complexity in engineering. In response to the issue, this paper proposes a novel strategy of stepwise varying PRI (SV-PRI), which demonstrates higher reconstruction accuracy compared with CV-PRI. Furthermore, confronting the azimuth non-uniform sampling characteristics induced by the PRI variation, this paper introduces a complete uniform reconstruction processing based on the azimuth partitioning methodology, which effectively alleviates the inherent contradiction between resolution and swath width. The processing flow, utilizing the temporal point remapping (TPR) concept, ensures the uniformity and coherence of dataset partitioning and reassembly in the context of the interpolation on non-uniform grids. Finally, according to the simulation results, the point target data, processed through the processing flow proposed in this study, have demonstrated effective focusing results. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) and tomographic SAR measurement techniques are commonly used for the three-dimensional (3D) reconstruction of complex areas, while the effectiveness of these methods relies on the interferometric coherence among SAR images with minimal angular disparities. Radargrammetry exploits stereo image matching to determine the spatial coordinates of corresponding points in two SAR images and acquire their 3D properties. The performance of the image matching process directly impacts the quality of the resulting digital surface model (DSM). However, the presence of speckle noise, along with dissimilar geometric and radiometric distortions, poses considerable challenges in achieving accurate stereo SAR image matching. To address these aforementioned challenges, this paper proposes a radargrammetric method based on the composite registration of multi-aspect SAR images. The proposed method combines coarse registration using scale invariant feature transform (SIFT) with precise registration using normalized cross-correlation (NCC) to achieve accurate registration between multi-aspect SAR images with large disparities. Furthermore, the multi-aspect 3D point clouds are merged using the proposed radargrammetric 3D imaging method, resulting in the 3D imaging of target scenes based on multi-aspect SAR images. For validation purposes, this paper presents a comprehensive 3D reconstruction of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) using Ka-band airborne SAR images. It does not necessitate prior knowledge of the target and is applicable to the detailed 3D imaging of large-scale areas with complex structures. In comparison to other SAR 3D imaging techniques, it reduces the requirements for orbit control and radar system parameters. To sum up, the proposed 3D imaging method with composite registration guarantees imaging efficiency, while enhancing the imaging accuracy of crucial areas with limited data. [ABSTRACT FROM AUTHOR]

Ground-based interferometry synthetic aperture radar (GB-InSAR) technology is becoming an important terrain mapping technology as it has the characteristics of short observation intervals, flexible operation environment and high data precision. Compared with air/space borne InSAR system, it is much easier for GB-InSAR to acquire repeat-pass/short-baseline data set, which can bring huge convenience on permanent scatterer (PS) technology. By using PS technology, on the one hand, the error caused by low coherence can be avoided, and on the other hand, the speed of the phase unwrapping part can be increased. In order to overcome the disadvantages of the non-uniform PS points distribution and low coherence cavities, the Kriging interpolation method is used to get an uniform digital elevation model (DEM) eventually. This study proposed a GB-InSAR interferogram processing method. First, it proposes a PS point selection method considering both accuracy and efficiency. Second, the study shows a network programming phase unwrapping method to unwrap the PS points. Then, Kriging interpolation method is analysed and used to fill the low coherence cavities. Finally, a field test is carried out in an open pit in Hebei, China. The DEM result of the observation area is shown to verify the correctness of this study's method.

In this letter, a high-resolution synthetic aperture radar (SAR) imaging algorithm based on a modified omega-K algorithm is proposed. The proposed algorithm first multiplies the reference signal. Then, the azimuth nonstationary phase error (ANSPE) is considered after performing the interpolation process based on the generalized frequency scale transformation. Finally, a well-focused SAR image can be obtained after compensating the ANSPE and correcting the residual spatial variant range migration by utilizing the range segmentation technique. The simulation results of point targets and the real-measured airborne high-resolution SAR data simultaneously verify the effectiveness and feasibility of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The ambiguity suppression is a technical challenge for the present generation of spaceborne synthetic aperture radar (SAR) systems since this kind of suppression does not take the high spatial resolution and wide coverage into account simultaneously. The transmitting scheme based on the waveform diversity technique is a promising candidate for the conventional (one transmit, one receive channel) SAR systems and has been widely discussed, because it has almost no extra system costs and the ambiguity suppression performance is not closely related to pulse repetition frequency (PRF). However, the accurate method to evaluate the ratio of the intensities of the ambiguities to that of the signal is still a gap. To this end, starting from the precise signal model formulated in this paper, the ambiguity evaluation for spaceborne SAR with waveform diversity has been analyzed in detail. Particularly, the modified azimuth ambiguity-to-signal ratio (AASR) and range ambiguity-to-signal ratio (RASR) formulas are given for the single polarization SARs and quadrature-polarimetric (quad-pol) SARs, which contributes a lot, for the system designer, to precisely evaluating the ambiguity performance. Finally, detailed simulation experiments exploiting the system parameters of the LuTan (LT-1) system are carried out to corroborate the theoretical developments. [ABSTRACT FROM AUTHOR]

As polarimetric antennas can be isolated through excellent electronic frameworks in circular quad-polarization (CQP) synthetic aperture radar (SAR) systems, cross-polarization (x-pol) and co-polarization (co-pol) channel imbalances are more challenging and essential to calibrate than crosstalk in polarimetric calibration (PolCAL). In uncalibrated CQP SAR images without corner reflectors (CRs), the reciprocity and reflection symmetry assumptions of the distributed targets are commonly used to estimate the x-pol and co-pol channel imbalances, respectively. To suppress the influence of additive noise on determining channel imbalances through distributed targets, high signal-to-noise ratio (SNR) distributed targets should be obtained from the x-pol and co-pol channels of the CQP SAR images: namely, surface-dominated and volume-dominated targets. However, some reflection symmetry assumptions used in the existing calibration literature have poor applicability with volume-dominated targets, resulting in unsatisfactory estimation results for the co-pol channel imbalance phase. In this paper, we assess the priority of the reflection symmetry properties of volume-dominated targets used to calibrate the co-pol channel imbalance phase in CQP SAR data synthesized from linear quad-polarization data of ALOS, GF-3, and RADARSAT-2. In the theoretical part, high-priority reflection symmetry (termed semireflection symmetry) assumptions are confirmed as the most suitable for estimating the co-pol channel imbalance phase, and were selected to develop an algorithm for estimating the co-pol channel imbalance phase. Furthermore, based on the novel method for estimating the co-pol channel imbalance phase, a channel imbalance calibration scheme is proposed for CQP SAR systems with reciprocal crosstalk, including extracting surface-dominated and volume-dominated targets, and estimating and filtering channel imbalances. We demonstrate the effectiveness of our proposed scheme with CRs in simulated CQP SAR images. The experimental results show that the calibration scheme is an effective workflow for estimating channel imbalances in CQP SAR systems with reciprocal crosstalk. [ABSTRACT FROM AUTHOR]

Video Synthetic Aperture Radar (ViSAR) operating in spotlight mode has received widespread attention in recent years because of its ability to form a sequence of SAR images for a region of interest (ROI). However, due to the heavy computational burden of data processing, the application of ViSAR is limited in practice. Although back projection (BP) can avoid unnecessary repetitive processing of overlapping parts between consecutive video frames, it is still time-consuming for high-resolution video-SAR data processing. In this article, in order to achieve the same or a similar effect to BP and reduce the computational burden as much as possible, a novel time-frequency sub-aperture technology (TFST) is proposed. Firstly, based on azimuth resampling and full aperture azimuth scaling, a time domain sub-aperture (TDS) processing algorithm is proposed to process ViSAR data with large coherent integration angles to ensure the continuity of ViSAR monitoring. Furthermore, through frequency domain sub-aperture (FDS) processing, multiple high-resolution video frames can be generated efficiently without sub-aperture reconstruction. In addition, TFST is based on the range migration algorithm (RMA), which can take into account the accuracy while ensuring efficiency. The results of simulation and X-band airborne SAR experimental data verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

Space-time waveform-encoding (STWE)-synthetic aperture radar (SAR) is an effective way to accomplish high-resolution and wide-swath (HRWS) imaging. By designing the specific signal transmit mode, the echoes from several subswaths are received within a single receiving window and overlap each other in STWE-SAR. In order to separate the overlapped echoes, the linear-constrained minimum variance (LCMV) beamformer, a single-null beamformer, is typically used. However, the LCMV beamformer has a very narrow and unstable notch depth, which is not sufficient to accurately separate the overlapped echoes with large signal energy differences between subswaths. The issue of signal energy differences in STWE-SAR is first raised in this paper. Moreover, a novel echo separation scheme based on a second-order cone programming (SOCP) beamformer is proposed. The beam pattern generated by the SOCP beamformer allows flexible adjustment of the notch width and depth, which effectively improves the quality of separation results compared to the LCMV beamformer. The simulation results illustrate that the scheme can greatly enhance the performance of echo separation. Furthermore, the experimental results based on the X-band STWE-SAR airborne system not only demonstrate the scheme's effectiveness but also indicate that it holds great promise for future STWE-SAR missions. [ABSTRACT FROM AUTHOR]

In this paper, a method of Synthetic Aperture Radar (SAR) image Automatic Target Recognition (ATR) based on Convolution Auto-encode (CAE) and Support Vector Machine (SVM) is proposed. Using SVM replaces the traditional softmax as the classifier of the CAE model to classify the feature vectors extracted by the CAE model, which solves the problem that the softmax classifier is less effective in the nonlinear case. Since the SVM can only solve the binary classification problem, and in order to realize the classification of the class objectives, the SVM were designed to achieve the classification of the input samples. After unsupervised training for CAE, the coding layer is connected with SVM to form a classification network. CAE can extract the features of the data by an unsupervised method, and the nonlinear classification advantage of SVM can classify the features extracted by CAE and improve the accuracy of the object recognition. At the same time, the high-accuracy identification of key targets is required in some special cases. A new initialization method is proposed, which initializes the network parameters by pretraining the key targets and changes the weights of different targets in the loss function to obtain better feature extraction, so it can ensure good multitarget recognition ability while realizing the high recognition accuracy of the key targets. [ABSTRACT FROM AUTHOR]

The Wishart mixture model is an effective tool for characterizing the statistical distribution of polarimetric synthetic aperture radar (PolSAR) data. However, due to the difficulty in determining the equivalent number of looks, the Wishart mixture model has some problems in terms of practicality. In addition, the flexibility of the Wishart mixture model needs to be improved for complicated scenes. To improve the practicality and flexibility, a new mixture model named the relaxed Wishart mixture model (RWMM) is proposed. In RWMM, the equivalent number of looks is no longer considered a constant for the whole PolSAR image but a variable that varies between different clusters. Next, an innovative algorithm named RWMM-Markov random field (RWMM-MRFt) for supervised classification is proposed. A new selection criterion for adaptive neighborhood systems is proposed in the algorithm to improve the classification performance. The new criterion makes effective use of PolSAR scattering information to select the most suitable neighborhood for each center pixel in PolSAR images. Three datasets, including one simulated image and two real PolSAR images, are utilized in the experiment. The maximum likelihood classification results demonstrate the flexibility of the proposed RWMM for modeling PolSAR data. The proposed selection criterion shows superior performance than the span-based selection criterion. Among the mixture model-based MRF classification algorithms, the proposed RWMM-MRFt algorithm has the highest classification accuracy, and the corresponding classification maps have better anti-noise performance. [ABSTRACT FROM AUTHOR]

Multiple-input and multiple-output synthetic aperture radar (MIMO SAR) is a very potential technique for high-resolution and wide-swath (HRWS) imaging due to the fact that it can provide more degrees of freedom. In this article, an innovative MIMO-HRWS SAR imaging system is introduced with segmented phase coding (SPC) waveforms. However, it is well-known that the echo separation issue is the most technical challenge for MIMO SAR. It has shown that the separation of orthogonal echoes from cross correlation interference can be achieved by scan-on-receive (SCORE). However, this method often requires large computing resources on board, especially for null-steering process. For this, we propose a two-stage spaceborne–ground echo separation scheme. This scheme is mainly divided into two steps: the first step is a real-time SCORE beamforming process on board to reduce the downlink data volume, and the second step is a bandpass–null-steering process to suppress the interfering echoes on the ground. Thus, this scheme allows for the low computing resources on board and sufficient suppression of the interference simultaneously. Following this scheme, the MIMO-HRWS SAR system enables its number of equivalent phase centers nearly double that of the azimuth multichannel SAR system, leading to higher resolution and wider swath imaging. Finally, detailed simulation experiments for the MIMO-HRWS SAR imaging system are performed to verify the practicability and feasibility of the proposed scheme. [ABSTRACT FROM AUTHOR]

To achieve high-resolution and wide-swath (HRWS) imaging, a space-time waveform-encoding (STWE) spaceborne synthetic aperture radar (SAR) system is adopted. In rugged terrain, the beam-pointing mismatch problem will appear when the traditional digital beamforming (DBF) technique is used to separate the received echoes. This problem leads to decreasing the received echo's gain, deteriorating the quality of the image product and making the interpretation of SAR image difficult. To address this problem, an advanced echo separation scheme for STWE spaceborne SAR based on the DBF and blind source separation (BSS) is put forward in this paper. In the scheme, the echoes are transmitted within the adjacent pulse repetition intervals to simulate multiple beams, and the scattered echoes are received by the sixteen-channel antennas in elevation simultaneously. In post-processing, a detailed flow is adopted. In the method, the DBF is firstly performed on received echoes. Due to the error caused by terrain undulation, the degree of echo separation is not enough. Then, the BSS is performed on the multiple echoes obtained after the DBF processing. Finally, the highly separated echo signal can be obtained. In this scheme, there is no need to perform the direction of arrival (DOA) estimation before the DBF processing, which saves valuable computing resources. In addition, to verify the proposed scheme, point target and distributed target simulations based on the 16-channel data of an elevation X-band DBF-SAR system are carried out. The results of point targets indicate that the residual echo caused by rough terrain can be reduced by more than 14 dB using the proposed scheme. The proposed scheme can be directly implemented into existing SAR systems; thus, it does not increase the complexity of the system design. The scheme has the potential to be applied to future spaceborne SAR missions. [ABSTRACT FROM AUTHOR]

Due to the minimum antenna area constraints of synthetic aperture radar (SAR), high-resolution and wide-swath (HRWS) imaging is difficult to be achieved using classical modes, such as scan, spotlight, and so on. Range ambiguity is one of the main technical challenges limiting HRWS imaging in spaceborne SAR. Inspired by the cocktail party effect, an advanced scheme based on blind source separation (BSS) is put forward to suppress the range ambiguity of spaceborne SAR in this article. In the scheme, multiple subantennas are used to collect multiple echo datasets, which are given different patterns. In this way, the echo signal of the desired region and that of the ambiguous region are weighted using different coefficients. During postprocessing, a detailed flow with the BSS algorithm is proposed to separate the desired echoes from those datasets. To verify the scheme, point target and scene simulations based on GF-3 are carried out. The results indicate that the range ambiguity can be reduced by more than 15 dB using the proposed scheme, the processing flow is effective, and the scheme has a good performance without increasing the complexity of the system design under the current SAR system conditions. The scheme has the potential to be adopted in future spaceborne SAR missions. [ABSTRACT FROM AUTHOR]

Ground-based interferometric synthetic aperture radar (GB-InSAR) technology can be applied to generate a digital elevation model (DEM) with high spatial resolution and high accuracy. Phase unwrapping is a critical procedure, and unwrapping errors cannot be effectively avoided in the interferometric measurements of terrains with discontinuous heights. In this paper, an improved multi-baseline phase unwrapping (MB PU) method for GB-InSAR is proposed. This method combines the advantages of the cluster-analysis-based MB PU algorithm and the minimum cost flow (MCF) method. A cluster-analysis-based MB PU algorithm (CA-based MB PU) is firstly utilized to unwrap the clustered pixels with high phase quality. Under the topological constraints of a triangulation network, the connectivity graph of any non-clustered pixel is established with its adjacent unwrapped cluster pixels. Then, the absolute phase of these non-clustered pixels can be identified using the MCF method. Additionally, a spatial-distribution-based denoising algorithm is utilized to denoise the data in order to further improve the accuracy of the phase unwrapping. The DEM generated by one GB-InSAR is compared with that generated by light detection and ranging (LiDAR). Both simulated and experimental datasets are utilized to verify the effectiveness and robustness of this improved method. [ABSTRACT FROM AUTHOR]

Multiple-input–multiple-output synthetic aperture radar (MIMO-SAR) has extensive application prospects, mainly including the acquisition of multidimensional scattering information, high-resolution and wide-width (HRWS) imaging, and moving target indication (MTI). Its echo separation is the most technical challenge, and so far, the confirmation for orthogonal waveform encoding MIMO-SAR by airborne experiments has not been reported in any literature. Here, an echo separation experiment based on the segmented phase code (SPC) waveforms and an airborne digital beamforming SAR (DBF-SAR) system is demonstrated for the first time. In the experiment, the SPC waveforms are cyclically transmitted within the adjacent pulse repetition intervals (PRIs) to simulate multiple transmitters, and the scattered echoes are received by the 16-channel antennas in elevation at the same time. In the postprocessing, the echo signals of continuous PRIs are added to obtain the mixed echoes, and a detailed echo separation method is adopted. In the method, the mixed echo signals from close arrival angles and far arrival angles are separated by the time shift and weighting, and by the bandpass filtering and DBF technique, respectively. Through the presented method, the mixed echoes of dual-transmit and 16-receive (2T16R) SAR imaging mode are separated and imaged successfully. The experimental results not only validate the echo separation scheme but also indicate that it is very promising in future MIMO-SAR missions. [ABSTRACT FROM AUTHOR]

Landslides, a major natural geohazard, obstruct municipal constructions and may destroy villages and towns, at worst causing significant casualties and economic losses. Interferometric Synthetic Aperture Radar (InSAR) technique offers distinct advantages on landslide detection and monitoring. In this paper, a more systematic workflow is designed for InSAR study of landslides, in terms of three levels: (i) early detection on regional scale, (ii) three-dimensional (3D) surface displacement rates estimation on detailed scale, and (iii) time series analysis on long-term temporal scale. The proposed workflow is applied for landslide research on the Xiaojiang River Basin, China, using ascending and descending Sentinel-1 images acquired from March 2017 to May 2019. First, the landslide inventory has been mapped and updated using InSAR stacking method, supporting geohazard prevention on a regional scale. A total of 22 active landslides are identified, ranging from medium to super large scale. Compared with the existing inventory, three unrecorded landslides are newly detected by our approach, and five recorded landslides are detected significant expansion of their boundaries. Then, specific to a detected landslide, Baobao landslide, a Total Least Squares–Kalman Filter-based approach is presented. Two outcomes are provided for further spatial-temporal pattern analysis: 3D displacement rates, providing an intuitive insight on the spatial characteristics and sliding direction of landslide, which are analyzed to deep the understanding of its kinematic mechanism, and long-term time series, which contribute to deduce the dynamic evolution of landslide, presenting benefits in landslide forecasting. [ABSTRACT FROM AUTHOR]

One of the challenges of the low-frequency spaceborne synthetic aperture radar (SAR) is that propagation through the ionosphere will introduce nonnegligible errors in the final SAR product. In the low-frequency bistatic SAR (BiSAR) system, the ionosphere will degrade the imaging performance and cause nonnegligible phase errors in the single-pass SAR interferometry application, which results in undesired errors of digital elevation model (DEM). In this article, a method that embedded into the focusing procedure is proposed, which aims to estimate and remove ionospheric effects on L-band spaceborne BiSAR system. First, the impacts of ionospheric effects on the BiSAR system are demonstrated, including the deterioration of imaging performance and the geometric distortion. Then, a method is proposed to correct ionospheric effects. Afterward, the simulations, including point targets and distributed targets, are carried out to verify the effectiveness of the proposed method. The imaging results and the DEM reconstruction results show that the proposed method can effectively estimate and remove ionospheric effects on spaceborne BiSAR systems. [ABSTRACT FROM AUTHOR]

Multichannel SAR system operating in the sliding spotlight mode has the capacity of imaging with very high resolution as requested by future spaceborne synthetic aperture radar (SAR) mission; hence, it has been attracted more and more attention in the SAR community. In a multichannel sliding spotlight SAR system with $N$ channels, the overall Doppler bandwidth of the data acquired by each channel is greater than $N \cdot \text {PRF}$ ; thus, the preprocessing algorithms (channel mismatch calibration and signal reconstruction) are no more available. To address this issue, a full-aperture imaging method for azimuth multichannel sliding spotlight mode is proposed in this article. First, the raw data of each channel need to be preprocessed based on a deramping operation, which can obtain an unambiguous Doppler spectrum. Afterward, the algorithm proposed for single-channel sliding spotlight mode can be performed. Finally, to avoid possible back-folded SAR images, postprocessing after focusing is demanded in some cases. The imaging results of the data acquired by GaoFen-3 (GF-3) are given for the first time in this article, which proves the effectiveness of the proposed imaging method and demonstrates the capacity of high-resolution wide-swath imaging of the multichannel sliding spotlight mode. [ABSTRACT FROM AUTHOR]

Hybrid-polarimetric architecture may become a new option for spaceborne quadrature-polarimetric (quad-pol) synthetic aperture radar (SAR) mainly due to the range ambiguity improvement without loss of polarization information. To inherit the analytical methods developed for the conventional quad-pol SAR data, it is necessary to transform the hybrid quad-pol SAR data into a linear polarimetric basis. However, this operation will result in deterioration of azimuth ambiguity performance. The theoretical analysis on range and azimuth ambiguities in quad-pol SAR has been relatively complete, which is also summarized in this article. Yet, there is no real data to verify the equivalence of polarization information and to compare the ambiguity levels. Based on P-band airborne experiment, real hybrid and conventional quad-pol SAR data are used for comparative verification. In addition, considering that polarimetric target decomposition is often used in the practical applications, we suggest a new perspective from target decomposition for the ambiguities in quad-pol SAR. Identical polarimetric processing results for two sets of comparative data verify that hybrid quad-pol SAR data are indistinguishable from conventional quad-pol SAR data. The demonstrated intensity images and decomposed RGB images with azimuth ambiguities, acquired by the two quad-pol modes, completely conform to the theory. [ABSTRACT FROM AUTHOR]

An alternate transmitting mode (ATM) is an important synthetic aperture radar (SAR) imaging mode as it can provide rich waveform design degrees of freedom to improve the system performance, especially to mitigate range ambiguities. However, the azimuth ambiguity issue caused by the differences between the autocorrelation functions of transmitted waveforms is ignored in existing studies. In this article, a deep understanding of the ambiguities in the ATM allows a correct evaluation of the ambiguity-to-signal ratio and the design of quasi-orthogonal nonlinear frequency modulation (NLFM) waveforms optimized for ambiguity suppression. Moreover, a novel azimuth compensation method is developed to remove the azimuth ambiguities caused by waveform diversity. Finally, detailed simulation experiments are carried out to verify the theoretical analysis. [ABSTRACT FROM AUTHOR]

Spaceborne multistatic synthetic aperture radar (M-SAR) has extensive applications, including multiangle imaging, digital beamforming (DBF) and cross- and along-track interferometry. However, it is difficult for classical satellite formations to meet the multimission (e.g., cross-track interferometry and along-track interferometry, i.e., XTI and ATI) requirements of M-SAR concurrently. Therefore, superpolyhedron (SP), an innovative satellite formation based on the dual-helix and pendulum formations, is proposed to maximize the coverage ratio of the effective cross- and along-track interferometric baselines at the same time. A method of constructing the SP formation is detailed. The method is a three-step procedure, in which the first two steps aim at obtaining an initial formation via exploiting the geometry of the formation dynamics; the last step solves an optimization problem. Then, the design of a supertetrahedron (ST) formation, a special case of the SP formation, is investigated as a numerical example. The merit of SP formation is represented as the coverage ratios of effective cross- and along-track interferometric baselines. The result is compared with those of the classical satellite formations. It shows that only the coverage ratios of the ST formation are greater than 70% simultaneously. Therefore, the ST formation can realize both effective XTI and ATI. It implies that the SP formation has the potential to be used in future spaceborne M-SAR interferometry. [ABSTRACT FROM AUTHOR]

In recent years, the multiple-input multiple-output (MIMO) synthetic aperture radar (SAR) concept has been widely researched because it can provide more degrees of freedom to dramatically improve SAR system performance. However, the echo separation issue of different transmit antennas is the most challenging issue and it stirs up extensive discussions. In this letter, a novel MIMO-SAR imaging scheme based on the improved orthogonal frequency-division multiplexing (OFDM) waveforms is proposed. The main contributions of this work are that: 1)Improved generation method for $M$ OFDM waveforms is presented. This method can compensate the extra carrier frequency deviation and compared with the other compensation methods, this method is more general and suitable for $M$ OFDM waveforms. 2)Based on the proposed OFDM waveforms, a novel and low-cost spaceborne MIMO-SAR imaging scheme is proposed. In this scheme, a simple time-shift weighting process and a bandpass filter bank are employed to separate the echoes from the close arrival angles. Then, the digital beamforming (DBF) on receive in elevation is employed to separate the echoes from far arrival angles. Furthermore, the distributed scene simulation results are presented to verify the practicability of the proposed scheme. [ABSTRACT FROM AUTHOR]

In the Earth observation mission of the synthetic aperture radar (SAR), wide swath can be used to complete global monitoring in a short time and high resolution can provide rich detailed information about the feature space and prominent structure and texture. However, the traditional single-channel classical SAR system cannot meet high-resolution and wide-swath (HRWS) imaging demand due to the constraint of minimum antenna area. Fortunately, this fundamental limitation can be overcome by using multiple receive subapertures in combination with advanced digital beamforming (DBF) technique. DBF in elevation can provide high gain and better system performance and has recently gained much attention in the field of SAR imaging. This article presents a 16-channel in elevation airborne X-band DBF-SAR system with 500-MHz bandwidth, characterized by high speed data acquisition and storage, as a test bed to provide the technical reserves and support for a future spaceborne DBF-SAR system in China. The hardware configuration of this system is designed according to a realistic flight mission. To verify the feasibility and operability of this advanced 16-channel DBF-SAR system, an outfield airborne flight experiment was successfully conducted in eastern Guangdong Province in November 2019. Meanwhile, considering the inevitable channel mismatch from airborne system, a precise strategy as well as the underlying signal processing is proposed to process the experiment data. In addition to the channel mismatch due to the topographic height, the Scan-On-Receive (SCORE) pattern loss (SPL) is also an inherent factor, which will deteriorate the output SNR in final SAR images. Therefore, this article also implements a quantitative assessment of SPL combined with the practical flight parameters and the real airborne data. Finally, the corresponding processing results are presented and analyzed in detail. The practical SNR improvement of 11.23 dB emphasize that DBF technology can significantly improve the quality of SAR images and will make an essential contribution to next generation of HRWS technology for environment monitoring. [ABSTRACT FROM AUTHOR]

The echo separation issue associated with different transmit antennas is the most technical challenge in realizing the multiple-input multiple-output (MIMO) synthetic aperture radar (SAR) system. In this article, a novel MIMO-SAR imaging scheme based on an advanced radar waveform, namely, segmented-phase-code (SPC) waveform, is proposed. Compared with the state-of-the-art short-term shift-orthogonal (STSO) waveform beamforming schemes, this scheme relieves the short-term shift-orthogonality condition of transmitted waveforms without losing the imaging performance, which extends the optional waveform space. In this scheme, the separation of the echoes from close arrival angles is ensured by a simple time-shift weighting processing. Furthermore, a range bandpass filter bank and the digital beamforming (DBF) technique are employed to ensure that the echoes from far arrival angles are separable. Finally, detailed simulation experiments are performed to verify the feasibility of the proposed scheme, and in-depth discussions of different waveforms and MIMO-SAR imaging schemes are presented. [ABSTRACT FROM AUTHOR]

The bistatic synthetic aperture radar (BiSAR) plays an important role in remote sensing. However, the deviation between the two oscillators in BiSAR systems will cause a residual modulation of the echo signal. Therefore, the phase synchronization is an important issue that must be addressed in the BiSAR system. An advanced noninterrupted phase synchronization scheme is used for LuTan-1. The synchronization pulses are exchanged immediately after the ending time of the radar echo receiving window and before the starting time of the next pulse repetition interval, which will not interrupt the normal SAR operation. In order to evaluate the accuracy of the phase synchronization scheme, the model of phase synchronization is introduced at first. The hardware design and processing flow of LuTan-1 are introduced in detail. An innovative internal calibration strategy is also described. Then, the test data acquired by the ground validation system are analyzed to verify the effectiveness of the phase synchronization scheme. The signal-to-noise ratio (SNR) and the synchronization rate are the two most important factors to influence the accuracy in phase synchronization. The conclusions have guiding significance for the synchronization module design of LuTan-1 and the future BiSAR system. [ABSTRACT FROM AUTHOR]

The minimum antenna principle gives rise to the extremely complex engineering implementation and data processing of spaceborne high-resolution and wide-swath (HRWS) synthetic aperture radar (SAR). To address this problem, a multiswath jump SAR with sound range ambiguity performance is proposed in this letter, which continuously switches multiple radar signals with nonoverlapping spectrum to radiate different areas during the transmitting time. To further obtain high-resolution images, the echo signals are processed by the methods of range spectrum splicing and azimuth multichannel reconstruction. Besides, some simulation experiments are executed to verify the capability of HRWS imaging of multiswath jump SAR and the theoretical analysis. [ABSTRACT FROM AUTHOR]

In this letter, a novel and low-cost echo separation technique for the multiple-input multiple-output (MIMO) synthetic aperture radar (SAR) is presented, based on the orthogonal frequency-division multiplexing (OFDM) chirp waveforms. The proposed scheme allows the generation of multiple OFDM chirp waveforms on common spectral support. In the new scheme, a series of simple time-domain operations including replica, T-shift, and superposition is applied to eliminate the interference waveform within a limited time. Then, a combination with a bandpass filter instead of a matched filter to focus signal power and digital beamforming (DBF) on receive in elevation enables the suppression of interference signals for a realistic spaceborne SAR scenario, where the swath width exceeds the spatial extension of the transmitted pulse. Furthermore, the distributed scene simulation results are presented to verify the practicability of the proposed scheme. [ABSTRACT FROM AUTHOR]

The high-fidelity deceptive jamming contaminated synthetic aperture radar (SAR) images are very confusing when they are interpreted for target recognition. In this letter, a novel azimuth phase coding (APC)-based method is proposed for deceptive jamming suppression, especially with characteristics of high fidelity and intermittent sampling. The deceptive jamming model is detailedly formulated, and the difference and relation related to the real target are also discussed. Then, the APC-based suppression method is proposed, where the original APC principle and how it is to be introduced into deceptive jamming suppression are deduced and analyzed. Considering the delay feature of deceptive jamming retransmission, azimuth phase modulation, azimuth phase demodulation, and azimuth filtering are successively implemented. Then, parameters discussion is carried out for a deeper understanding. Simulation results demonstrate the superiority of the proposed method. [ABSTRACT FROM AUTHOR]

The azimuth phase coding (APC) technique is known for its very low implementation complexity and its effectiveness for point and distributed ambiguities in conventional synthetic aperture radar (SAR) systems. In recent years, as an extension, the APC technique has been briefly discussed for multichannel SAR systems. However, the properties of the APC technique are no longer guaranteed in the multichannel SAR systems based on the digital beamforming (DBF) on-receive, and only a slight APC gain in the suppression of the range ambiguity can be obtained. In this article, we first provide a more thorough analysis for an APC-multichannel SAR system with respect to a uniform pulse-repetition frequency (PRF). Then, the APC/multichannel SAR system with nonuniform spatial sampling is briefly discussed, and an improved reconstruction approach based on a quadratically constrained optimization model is proposed to increase greatly the APC gain with respect to existing multichannel reconstruction algorithms. This proposed approach allows the minimization of the range ambiguity with a given azimuth-ambiguity constraint. In particular, for some specific PRFs, the proposed method permits a cancellation of the odd-order range ambiguity. Finally, simulation experiments are performed to verify the advantages and effectiveness of the proposed approach. [ABSTRACT FROM AUTHOR]

The challenging problem to realize high-resolution and wide-swath (HRWS) synthetic aperture radar (SAR) imaging is the ambiguity suppression in the azimuth and range directions. According to the spatial angle difference of each ambiguity component, the current technical approach is to design the spatial filter for achieving the ambiguity suppression based on the 2-D multichannel system. Along with the increasing of HRWS imaging requirements, the number of system channels also gradually increase and further result in the complex structure design of the phased array antenna system. Meanwhile, the traditional phased array antenna cannot effectively control the direction of the transmit beampattern in range. Unlike the traditional phased array, frequency diverse array (FDA) employs a small-frequency increment across the whole array elements and forms the range-angle-dependent S-shaped transmit beampattern, which can be utilized to separate the different range ambiguous region. Considering the above-mentioned characteristics and the range periodicity problem of transmit beampattern, this letter devises a scheme for spaceborne SAR HRWS imaging mode in the view of transmit beampattern utilizing 2-D planar array, i.e., the FDA in azimuth for removing the range nonperiodicity ambiguity and the conventional phased array in elevation for removing the range periodicity ambiguity. Simulation results have been presented to validate the effectiveness of the proposed scheme. [ABSTRACT FROM AUTHOR]

Phase synchronization is one of the key issues that must be addressed for the bistatic synthetic aperture radar (BiSAR) system. LuTan-1 (LT-1) is an innovative spaceborne BiSAR mission based on the use of two radar satellites operating in the L-band to generate the global digital terrain models in the bistatic interferometry mode. An advanced synchronization scheme is used for the LT-1 system. The synchronization pulses are exchanged immediately after the ending time of the radar echo-receiving window and before the starting time of the next pulse-repetition interval. Therefore, it cannot interrupt the normal SAR data acquisition, further improving the synchronization accuracy and avoiding the data missing effect. In this letter, a robust phase-error estimation and compensation method is proposed to improve the accuracy of the synchronization by using the Kalman filter. The test data acquired from the ground validation system of the LT-1 synchronization module are used to demonstrate the feasibility of the proposed scheme. The results validate the effectiveness of the proposed scheme and prove the promise for its future application in LT-1. [ABSTRACT FROM AUTHOR]

For synthetic aperture radars (SARs), an alternate transmitting mode based on waveform diversity is widely discussed for suppressing range-ambiguity in many letters, because it is easy to implement and there is no need to improve the pulse repetition frequency (PRF). These studies mainly focus on the discussion of pseudo-orthogonal waveform design, such as up–down chirp waveforms and orthogonal-frequency-division-multiplexing (OFDM) waveforms; however, the effect on imaging caused by waveform diversity is ignored. This letter, for the first time, provides a demonstrative derivation of imaging for the alternate transmitting mode, which will deepen the understanding of this mode and be helpful for the future research. In this letter, we point out that transmitting different waveforms will introduce a phase-amplitude periodic modulation in the azimuth domain; furthermore, it will cause the aliasing of the azimuth spectrum. In addition, the simulation experiment is performed for verifying the correctness of the theoretical analysis. [ABSTRACT FROM AUTHOR]

This article establishes a multiobjective optimization model to suppress the azimuth ambiguity power and noise simultaneously in signal reconstruction for a multichannel synthetic aperture radar (SAR) system. This multiobjective optimization model extends the theory of multichannel signal processing for reconstructing the SAR signal from the aliased signals. Linear scalarization and a quadratically constrained method for the multiobjective optimization model are applied to obtain $l_{1}$ norm optimization, $l_{2}$ norm optimization, and quadratically constrained optimization, respectively, in signal reconstruction. Azimuth ghosts can intuitively reflect the effects of azimuth ambiguity on SAR images. The $l_{1}$ norm optimization solution leads to a minimum upper bound of azimuth ghosts. A lowest azimuth ambiguity-to-signal ratio (AASR) can be derived by $l_{2}$ norm optimization. By relaxing the constraint of total ambiguity power suppression, one can obtain a minimum noise level in the case of quadratically constrained optimization. The reconstruction performances of the multiobjective optimization model in terms of AASR, signal-to-noise ratio (SNR), and signal-to-ambiguity-plus-noise ratio (SANR) are investigated with respect to the pulse repetition frequency (PRF) and compared with other methods for a multichannel SAR system. [ABSTRACT FROM AUTHOR]

Digital beamforming (DBF) with Scan-On-Receive (SCORE) in elevation is a powerful technique for spaceborne synthetic aperture radar (SAR) to achieve high-resolution wide-swath (HRWS) images. DBF in spaceborne SAR should be implemented in real-time to reduce the volume of the downloaded data. Current digital beamformers in SAR systems usually use phase shift instead of a time delay network to ensure real-time implementation. However, conventional phase shift DBF SAR with narrow array bandwidth is not applicable for broadband signals. The beam steering deviation as a function of frequency is obvious for signals with large fractional bandwidth, which appears as a phenomenon of frequency dispersion. If the signal bandwidth is wider than the array bandwidth, frequency dispersion can significantly deteriorate the signal-to-noise ratio (SNR) and must be well relieved. This article analyzes the frequency dispersion in DBF SAR and proposes an innovative DBF-SCORE scheme with specially designed scalloped beam. The proposed digital scalloped beamforming (DSBF) scheme is effective in relieving the influence of frequency dispersion in DBF SAR. Theoretical analysis and simulation results validate the effectiveness of the proposed scheme. The proposed DSBF scheme gives practical solution to the problem of frequency dispersion in broadband DBF SAR, which makes DBF-SCORE a more practical technique for future spaceborne HRWS SAR. [ABSTRACT FROM AUTHOR]

It is well known that the nonlinear frequency modulation (NLFM) chirp waveform can shape advantageously the power spectrum density (PSD) such that the autocorrelation function exhibits reduced sidelobes as the window function. However, differences between the PSD and window function due to the Gibbs effects caused by the Fresnel integral would lead to deteriorative performance of the NLFM chirp waveform. In particular, the correlation function of NLFM waveform with Chebyshev PSD is seriously inconsistent with the lowest sidelobe level of the Chebyshev window function possesses. To overcome the inconsistency, therefore, in this letter, a novel NLFM waveform with modified Chebyshev window PSD is proposed, which combines the Chebyshev with edge distortion compensation, allowing, in theory, low sidelobe level as Chebyshev window. Using theoretical analysis also confirmed by simulation, this letter shows that the novel NLFM waveform possesses low sidelobes without high computational complexity in design. [ABSTRACT FROM AUTHOR]

LuTan-1 (LT-1) refers to an innovative mission of spaceborne bistatic synthetic aperture radar (BiSAR) adopting the phase synchronization scheme of pulse exchange, which is scheduled to be launched in 2020. In this mission, the multipath effect caused by the reflection of satellites and Doppler frequency shift resulting from the relative motion between satellites constitute two critically latent factors deteriorating the performance of the phase synchronization scheme. This article details a loss factor to evaluate the fading of synchronization signals under the reflection of smooth and rough surfaces and estimates the influence of Doppler frequency shift on synchronization signals. Furthermore, the multipath channel impulse response is modeled, and the correlation characteristics of multipath channel are described by the coherent bandwidth and coherent time. In addition, two simulation experiments based on the system parameters of LT-1, are implemented to assess the influence of time-invariant and -varying multipath effects on the phase synchronization scheme. A scale experiment is also executed to quantify the influence of multipath effect on phase synchronization, and its result demonstrates that the phase synchronization scheme of LT-1 can not only achieve full coverage of space and backup capability of pulse exchange but also meet the application requirements under multipath effect. [ABSTRACT FROM AUTHOR]

LuTan-1 (LT-1), i.e., TwinSAR-L, mission is an innovative spaceborne bistatic synthetic aperture radar (SAR) mission that is based on two satellites operating at L-band with flexible formation flying, which is planned to launch in 2020. The primary objective of LT-1 is to generate a highly accurate global digital elevation model (DEM). Beyond that, LT-1 will serve for the demonstration of some state-of-the-art technologies in radar field and some applications, such as biomass inversion, disaster forecasting, and climate and environmental monitoring, and phase synchronization is a technical challenge in realizing the highly accurate topography and deformation measurements. The pulsed alternate synchronization scheme, which is proposed to solve the synchronization problem of TerraSAR-X add-on for Digital Elevation Measurements (TanDEM)-X, is an efficient and accurate method. However, it interrupts the normal work of the TanDEM-X, accordingly flowing a series of problems. For LT-1, a novel synchronization scheme, in which the phase synchronization signal is exchanged by virtue of a time slot between radar signals, is applied. Thus, the working efficiency and synchronization accuracy can further be improved. Furthermore, the performance prediction and phase synchronization experiment for this synchronization scheme is presented, which verifies the feasibility of the proposed scheme. Finally, in order to guarantee the transmission quality of the synchronization signal, the illumination combinations and gain variation of the synchronization antenna in an orbital period are detailed. [ABSTRACT FROM AUTHOR]

LuTan-1 [(LT-1), i.e., TwinSAR-L] mission is an innovative spaceborne bistatic synthetic-aperture radar (BiSAR) mission focusing mainly on differential interferometry, which will be launched in 2020. This article introduces some important aspects of the LT-1 mission for the first time, including the formation configuration, imaging mode, application scenarios, and the efficient baselines between the master satellite and the slave satellite. To realize the high accurate topography and deformation measurements, a wide swath BiSAR focusing algorithm with phase reserving ability should be developed. This article proposes a modified bistatic range-Doppler algorithm based on 2-D principle of stationary phase spectrum, which reduces the phase error introduced by the root term expansion and has an excellent focus performance and a good phase reserving ability. Finally, the spaceborne bistatic simulation experiments using orbital parameters and imaging mode of the LT-1 mission, including point targets and scene targets, are utilized to illustrate the validity and accuracy of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Multi-channel synthetic aperture radar (SAR) in azimuth can overcome the minimum-antenna-area constraint of the conventional SAR in high-resolution and wide-swath (HRWS) imaging. However, the SAR system suffers from amplitude and phase mismatch among channels and nonideal antenna pattern, which will result in azimuth ambiguity and ghost targets in the final image. Therefore, taking the nonbandlimited signal and channel errors into account, a practical azimuth ambiguity-to-signal ratio (AASR) model of multi-channel SAR system is established. Meanwhile, the baseband Doppler centroid (DC) frequency related to channel errors also has an influence on image quality. Then, an effective method is proposed to calculate the baseband DC frequency according to the jumping points of the channel phase errors estimate. Subsequently, considering the effect of azimuth antenna pattern (AAP), a corresponding relationship between the ideal steering vectors and the signal subspace from the decomposing covariance matrix is established. After that, based on the uniqueness of the signal subspace and the correct corresponding relationship, an accurate method is proposed to estimate the channel phase errors by minimizing the minimum mean square error (MMSE) of the signal subspace. Finally, an accurate multi-channel SAR imaging diagram is shown to effectively mitigate the azimuth ambiguous energy caused by channel errors. Simulation and real data experiments, including four channel airborne SAR data with a bandwidth of 210 MHz and the Chinese Gaofen-3 dual receiving channel (DRC) spaceborne SAR data, validate the effectiveness of the proposed calibration method, particularly in low signal-to-noise ratio (SNR). [ABSTRACT FROM AUTHOR]

As a novel system, multiple-input multiple-output synthetic aperture radar (MIMO-SAR) has achieved rapid development in the past years. Based on the MIMO technique, multiple transmitting and receiving antennas could be utilised to compose a specific geometrical structure and acquire a large aperture. The MIMO-SAR system can be utilised to take deformation measurement to scenes with high deformation rate and can avoid the problems of phase errors caused by the antennas' vibration on the rail. This study introduces the basic principle of the MIMO technique and the key problems in the system design. Experimental datasets are acquired with the MIMO-SAR and GB-SAR (ground-based SAR) systems simultaneously. Comparisons of the imaging results indicate that the MIMO-SAR system has a better repeat-track interferometry performance than the GB-SAR system. In addition, deformation measurement results validate the high-accuracy measurement ability of the MIMO-SAR system. [ABSTRACT FROM AUTHOR]

Generally, synthetic aperture radar (SAR) system transmits linear frequency modulation (LFM) signal to obtain the high-resolution image and weighted windowing is usually employed to suppress sidelobes. However, it will cause a 1–2-dB signal-to-noise ratio (SNR) loss. Nonlinear frequency modulation (NLFM) signal, which can construct the signal’s power spectral density (PSD) to reduce sidelobes without loss of SNR, is a promising candidate. However, the real-time generation of precise NLFM signal is still a technical challenge. In this letter, a high-precision NLFM signal generator with the ability of predistortion compensation is developed, and this signal generator will be employed in LuTan-1 (LT-1, i.e., TwinSAR-L) mission which is an innovative spaceborne bistatic SAR mission and planned to launch in 2020. In addition, a two-step error compensation method is developed to compensate the system error. Finally, the ground experiment is performed to validate the designed signal generator. [ABSTRACT FROM AUTHOR]

Based on the permanent scatterer (PS) technique, deformation measurements were taken in ground-based synthetic aperture radar (GB-SAR) applications. To realize long-term and real-time deformation monitoring, a PS processing framework is proposed. Firstly, a group selection framework is introduced. A certain number of GB-SAR images are selected as a group and different PS sets are selected. Secondly, a fluctuation factor is defined to detect abnormal images. Some images with abnormal amplitude information should not be used for deformation analysis. Thirdly, an adaptive threshold determination method to select the PSs is proposed. The PS numbers in different PS sets can be highly stable. Lastly, a real-time processing framework is introduced which can be applied for on-site monitoring. The proposed processing framework was also used to monitor an open-pit mine for about 11 days. Experimental results validated the effectiveness and reliability of the framework for long-term and real-time GB-SAR monitoring. [ABSTRACT FROM AUTHOR]

With the development of high-resolution radar satellite for global comprehensive environmental monitoring, day-and-night and all-weather surveillance has become an active and growing research field. However, in all cases, these applications require radar to have a high-efficiency radar module (e.g., T/R module), and high system transmitting power. These requirements may put an important limitation on the performance of a radar satellite with a high-power configuration. In this paper, we report a novel waveform optimization framework. Through this framework, an advanced nonlinear frequency modulation (NLFM) waveform with lower sidelobes and a smaller main lobe, which can significantly relieve the restriction of very limited satellite power, is constructed. In addition, we apply it in a real synthetic aperture radar (SAR) system with a bandwidth of 100 MHz at 9.6-GHz carrier frequency and the whole process of the NLFM waveform for radar imaging is discussed in detail, including the system architecture and configuration, a system error compensation method, and a modified chirp scaling algorithm (CSA). The imaging results demonstrate the excellent performance of the advanced NLFM waveform. Moreover, we observe that the SAR system with the advanced waveform has a higher signal-to-noise ratio (SNR) of 1.29 dB compared with the conventional linear frequency modulation (LFM) waveform. The improvement of 1.29-dB SNR means that the real radar system can reduce transmitting power with a ratio of 25%. This effect is likely to be a potential feature of NLFM waveform, which can reduce the transmitting power requirement, especially for radar satellite. [ABSTRACT FROM AUTHOR]

In the multichannel synthetic aperture radar (SAR) systems, unavoidable channel errors will significantly degrade the performance of the ambiguity suppression. To address this problem, a channel phase error estimation method is proposed in this letter. First, the multichannel echo model and the weighted backprojection algorithm are introduced. The channel phase errors are then estimated by maximizing the image intensity using the gradient descent method. The simulation results confirm that the proposed method has higher accuracy and robustness than the orthogonal subspace method. The airborne SAR data acquired by a four-channel strip map C-band airborne SAR system demonstrate the feasibility of the proposed method. [ABSTRACT FROM AUTHOR]

Range ambiguity suppression is a technical challenge for current synthetic aperture radar systems. A potential solution is to orthogonally modulate the transmitting pulses; however, these orthogonal waveforms (e.g., up-down chirp waveforms) actually cannot reduce the cross correlation energy (CCE). Nonlinear frequency modulation (NLFM) waveform can change the time–frequency relationship to adjust the energy distribution within the bandwidth to reduce the CCE. In this letter, a novel orthogonal NLFM waveform optimization framework is proposed. Through this framework, advanced NLFM waveforms with low sidelobe and CCE are constructed. Furthermore, point and distributed scene simulation results are presented to verify the practicability of the proposed waveforms. In addition, the system scheme, waveform design, and range ambiguity suppression performance are detailed. [ABSTRACT FROM AUTHOR]

Atmospheric artifacts and phase unwrapping errors have unfavorable effects on differential synthetic aperture radar interferometry (DInSAR) deformation monitoring. In this letter, we present an alternative small-baseline DInSAR inversion algorithm, velocity-constraint $L_{1}$ -norm minimization. The proposed algorithm improves the robustness of time series deformation estimation by combining a smoothing constraint and $L_{1}$ -norm minimization. The smoothing constraint can minimize temporal atmospheric artifacts, and the $L_{1}$ -norm minimization outperforms $L_{2}$ -norm minimization in the presence of phase unwrapping errors. The iteratively reweighted least square algorithm is employed to adjust the weights of DInSAR observations and smoothing constraints in $L_{1}$ -norm minimization. The proposed algorithm is validated using simulated data and TerraSAR-X data. The experimental results show that the proposed algorithm is suitable for the inversion of approximately linear deformation processes affected by both atmospheric artifacts and unwrapping errors. [ABSTRACT FROM AUTHOR]

More and more synthetic aperture radar (SAR) satellites in orbit provide abundant data for remote sensing applications. In August 2016, China launched a new Earth observation SAR satellite, Gaofen-3 (GF-3). In this paper, we utilize a small stack of GF-3 differential interferograms to map land subsidence in Beijing (China) using the time-series SAR interferometry (InSAR) technique. The small stack of differential interferograms is generated with 5 GF-3 SAR images from March 2017 to January 2018. Orbit errors are carefully addressed and removed during differential InSAR (DInSAR) processing. Truncated singular-value decomposition (TSVD) is applied to strengthen the robustness of deformation rate estimation. To validate the results of GF-3 data, an additional deformation measurement using 26 Sentinel-1B images from March 2017 to February 2018 is carried out using the persistent scatterer interferometry (PSI) technique. By implementing a cross-comparison, we find that the retrieved results from GF-3 images and Sentinel-1 images are spatially consistent. The standard deviation of vertical deformation rate differences between two data stacks is 11.24 mm/y in the study area. The results shown in this paper demonstrate the reasonable potential of GF-3 SAR images to monitor land subsidence. [ABSTRACT FROM AUTHOR]

Bistatic and multistatic synthetic aperture radar (SAR) can greatly improve system performance in various aspects, especially in achieving high-resolution wide-swath (HRWS) images. However, the specific system structure may lead to a higher degree of range ambiguities. This letter studies the structure of multistatic multiple elevation beams (MMEB) system which achieves HRWS images with the drawback of more serious range ambiguities compared with the conventional SAR which must be suppressed to get an acceptable system performance. The character that the receivers form, a prospective distributed multichannel system in azimuth, can give a guide in estimating the strong range ambiguities and remove them. An innovative method in estimating and removing (not just smearing) the strong range ambiguities based on this character is proposed. Theoretical analysis and experimental results show the effectiveness of the method. The proposed method considerably improves the range ambiguous performance of the MMEB system without using digital beamforming or pulse coding and makes full use of the system character, and thus improves the applicability of the system. [ABSTRACT FROM AUTHOR]