Search

The marine shale within the Sichuan Basin constitutes China's significant shale gas production, featuring old formation age, high degree of thermal evolution, multiple tectonic movements, and complex structural conditions. However, there are significant differences in the shale gas preservation conditions and reservoir quality in different areas, limiting future large-scale exploration and development. Pore structure significantly influences shale reservoir quality, gas content, and exploration of shale gas occurrence, migration, and enrichment mechanisms. The influence of structural-dominated preservation conditions on shale pore structures is essential to comprehend for effective shale gas exploitation. This study employs field-emission scanning electron microscopy in conjunction with other techniques (low-temperature N2 adsorption, low-temperature CO2 adsorption, and nuclear magnetic resonance) for detailed analyses of the pore structure across varied structural zones, revealing the influence of structural attributes, fault systems, depth of burial, and formation pressure on pore architecture, and examining the relationship between pore structure and shale gas preservation conditions. The results show that stable structural condition is conducive to the development and preservation of shale pores. Structural compression causes inorganic and organic pores to become narrow and elongated due to shrinkage, with a significant increase in microfractures. The porosity of shale with stable structural conditions exhibits markedly increased porosity compared to samples under structural compressions. Under conditions of similar TOC and mineral composition, the pore size distribution (PSD), pore volume (PV), and specific surface area (SSA) of shale after structural compression are significantly lower than those of samples with stable structural conditions. As the burial depth increases, the shale porosity shows a decreasing trend, but the decrease is limited. Burial depth significantly impacts the SSA and PV of high-TOC samples (3%-6%). As the burial depth increases, both SSA and PV show a significant decreasing trend. When the burial depth reaches 4000 m, SSA and PV tend to concentrate. The formation pressure coefficient is an important factor for the development and preservation of shale pores, and porosity is positively correlated with the formation pressure coefficient. Increased formation pressure coefficient indicates superior preservation conditions and enhanced pore development. [ABSTRACT FROM AUTHOR]

The Wufeng-Longmaxi Formation shales with burial depths > 3 500 m in the southern Sichuan Basin are believed to have large shale gas potentials. However, the reservoir properties and gas-in-place (GIP) contents of these shales exhibit variations across different sublayers. In this study, a set of Wufeng-Longmaxi shales with burial depths of 4 000–4 200 m was derived from the Well Y101H2 in the Luzhou area, and the differences in geological and geochemical characteristics, porosity, water saturation and GIP content of various sublayer shales were investigated. The results indicate that the TOC content and effective porosity of the upper (LMX1-4) and lower (LMX1-3) sublayer shales of the first member of the Longmaxi Formation are better than those of the Wufeng Formation (WF) shales, which results in the LMX1-4 and LMX1-3 shales having higher GIP contents than the WF shales. The GIP contents of the LMX1-3 shales are higher than those of the LMX1-4 shales, and this is likely because the organic matter of the LMX1-3 shales had more aquatic organisms and was preserved in a stronger reductive environment, which leads to a stronger gas generation potential. In contrast to the middle-shallow LMX1-4 shales in the Sichuan Basin, the deep LMX1-4 shales in the Luzhou area have advantageous reservoir properties and GIP contents, and thus it is promising to synchronously exploit the deep LMX1-4 and LMX1-3 shales in some regions of the southern Sichuan Basin. [ABSTRACT FROM AUTHOR]

In the Luzhou Block of the southern Sichuan Basin, the deep Longmaxi shales have become important exploration targets in recent years. However, the water-bearing properties of these shales are still unclear, which significantly limits evaluations of reservoir pore structures and gas-in-place (GIP) contents. In this study, twelve fresh shale core samples were collected at the well site, and the pore water (CPW) and equilibrium water (CEW) contents, as well as the pore structures of the shales, were analyzed under both as-received and dried conditions. The results indicate that the deep shales have low water-bearing extents with a pore water content (CPW) of 3.82–16.67 mg/g, and that both the organic matter (OM) and inorganic matter (IM) pores can be used for pore water storage. The extent of influence of pore water on nonmicropores and IM pore structures is more significant than that on micropores and OM pore structures. Meanwhile, the pore water obviously reduces the retention effects of nanopores and may block nanopores with pore widths < 0.5 nm. An average of 40% of pore spaces were taken up by pore water in the studied deep shales in the Luzhou Block, and the residual pore surface area and pore volume of the shales were mainly contributed from micropores and nonmicropores, respectively. [ABSTRACT FROM AUTHOR]

There are various sedimentary structures developed in the black shales of the Upper Ordovician Wufeng Formation and the Lower Silurian Longmaxi Formation in Luzhou area, southern Sichuan Basin, southwestern China. In order to evaluate the controlling effects of sedimentary structures on the key parameters of shale reservoir properties, collected classification of sedimentary structures, scanning electron microscope observation, analysis of shale fabric and porosity characteristics, low‐pressure nitrogen adsorption, methane isothermal adsorption, and conventional triaxial compression test were carried out based on shale samples from Wells A‐H1, B‐H1, C‐H1 and D‐H1 in the study area. The sedimentary structures recorded in these shales are categorized into five types: homogeneous bedding, weak horizontal bedding, strong horizontal bedding, discontinuous ripple bedding, and gravel‐bearing massive bedding. In general, the palaeo‐hydrodynamics and oxygen content of water columns were weak when homogeneous bedding shale was deposited. The organic matter is the most abundant and the total organic carbon content is up to 4.01% on average. The average quartz content is 43.5%, and the brittleness index is the highest. The porosity and adsorption capacity were the highest, with an average of 4.57% and 79.5 scf/ton, respectively. Combined with its mechanical properties of low Poisson's ratio and high Young's modulus, homogeneous bedding sedimentary structure is associated with the shale units possessing the highest organic matter abundance, the strongest reservoir property, and the best fracability, which is the priority target for exploration and development of the Wufeng to lower Longmaxi Formation in the Sichuan Basin, southwestern China. [ABSTRACT FROM AUTHOR]

The shale of the Lower Silurian Longmaxi Formation is an important gas-producing layer for shale gas development in southern China. This set of shale reservoir characteristics and shale gas development potential provide an important foundation for shale gas development. This study takes wellblock XN111 in the Sichuan Basin, China, as an example and uses X-ray diffraction (XRD), scanning electron microscopy (SEM), isothermal adsorption, and other techniques to analyze the shale reservoir characteristics of the Lower Silurian Longmaxi Formation. The results show that the Lower Silurian Longmaxi Formation was deposited in a deep-water shelf environment. During this period, carbonaceous shale and siliceous shale characterized by a high brittle mineral content (quartz > 40 wt. % , carbonate mineral > 10 wt. %) and a low clay mineral content (<30 wt.%, mainly illite) were widely deposited throughout the region. The total organic carbon (TOC) content reaches up to 6.07 wt.%, with an average of 2.66 wt.%. The vitrinite reflectance is 1.6–2.28%, with an average of 2.05%. The methane adsorption capacity is 0.84–4.69 m3/t, with an average of 2.92 m3/t. Pores and fractures are developed in the shale reservoirs. The main reservoir space is composed of connected mesopores with an average porosity of 4.78%. The characteristics and development potential of the shale reservoirs in the Lower Silurian Longmaxi Formation are controlled by the following factors: (1) the widespread deep-water shelf deposition in wellblock XN111 was a favorable environment for the development of high-quality shale reservoirs with a cumulative thickness of up to 50 m; (2) the high TOC content enabled the shale reservoir to have a high free gas content and a high adsorptive gas storage capacity; and (3) the shale's high maturity or over maturity is conducive to the development of pores and fractures in the organic matter, which effectively improves the storage capacity of the shale reservoirs. The reservoir characteristic index was constructed using the high-quality shale's thickness, gas content, TOC, fracture density, and clay content. Using production data from shale gas wells in adjacent blocks, a mathematical relationship was established between the Estimated Ultimate Recovery (EUR) of a single well and the Reservoir Characteristics Index (Rci). The EUR of a single well in wellblock XN111 was estimated. [ABSTRACT FROM AUTHOR]

Currently, Luzhou in the Sichuan Basin is a focal point for shale-gas exploration and development in China. However, a lack of detailed research on the mineral composition of the Wufeng Formation-Longmaxi Formation (WF-LF) shale is hindering the extraction of deep-buried shale gas in the Luzhou shale play. Herein, a field emission scanning electron microscope (FESEM) equipped with the Advanced Mineral Identification and Characterization System (AMICS) software was employed to analyze the mineral composition of the WF-LF shale from six wells in Luzhou. Quartz was the dominant mineral type, (16.9–87.21%, average 51.33%), followed by illite, calcite, dolomite, and pyrite. Our study revealed that (1) quartz content showed a moderate positive correlation with the total organic carbon (TOC) content, indicating that the quartz found in the shale is mostly of biological origin; and (2) the sum content of siliceous minerals and carbonaceous minerals was moderately positively correlated with the brittleness index (BRIT) in well SS1H2-7 and in the well group of RS8 and RS5, indicating that the siliceous minerals and carbonaceous minerals had an active effect on reservoir compressibility. Finally, according to the mineralogical features of each sublayer, we identified four types of reservoirs to determine their scope for exploration. [ABSTRACT FROM AUTHOR]

In this study, shale cores from 20 wells in the S1l11-1 sublayer of Longmaxi Formation buried in shallow shale (<3500 m) and deep shale (>3500 m) in the southern Sichuan Basin, China were collected to compare their pore structures and gas-bearing properties using multiple experiments. Results showed that the deep layer has relatively lower brittle mineral content, which is disadvantageous in terms of the higher requirements it imposes on hydraulic fracturing. Results also showed that the most important factor controlling the differential enrichment of S1l11-1 shale gas in southern Sichuan Basin is porosity. Moreover, the porosity composition of shallow shale and deep shale has significant differences: the porosity of shallow shale is dominated by organic pores, while for deep shale, both organic and inorganic pores are important. The inorganic pores provide significant storage space for free gas in deep shale; their contribution warrants more attention. We also found that the difference in organic porosity of the shallow and deep shale samples resulted from large differences in pore development ability, while the highest inorganic porosity was concentrated near the optimal mineral composition when the content of quartz plus feldspar plus pyrite was about 70%. This study revealed the primary factor controlling the difference in gas content between shallow and deep shale and detailed the characteristics of microscopic pore structure, providing a basis for the exploration and development of deep shale gas in the Wufeng-Longmaxi Formation in the southern Sichuan Basin. [ABSTRACT FROM AUTHOR]

The pressure decay (or gas expansion) test with crushed samples has been used to evaluate the matrix permeability of shale and other low-permeability rock for many years. However, there still exist uncertainties relating to particle size and equilibrium pressure. The existing late-stage curve fitting method has the advantage of easy calculation, but the assumption that gas enters particles with a single permeability value is not generally applicable for shale samples, and late-stage analysis may lead to underestimation. This study proposes an optimization method to determine the equivalent bulk permeability that ensures the smallest sum of squares of errors between the forward-predicted pressure decay curve and the measure one. Both the optimization and curve fitting method are applied to two shale samples from the Ordovician Wufeng Formation of two wells in the Sichuan Basin, China with improved apparatus and testing procedures. The optimization method is superior to the curve fitting method in the repeatability and regularity on the change of apparent permeability with pressure. A strong linear relationship between apparent permeability and coefficient of compressibility is established between 3 and 12 bars. The variation of permeability with particle size is more diverse than that is commonly understood and might be nonmonotonic, depending on the change of pore structure during crushing. Change of apparent permeability with pressure (non-Darcy feature) is proposed as a criterion of whether pore structure has changed significantly. It is suggested to measure the variation of permeability with pressure and particle size to obtain a more comprehensive understanding of matrix permeability and pore structure. • An optimization method that ensures the smallest sum of squared errors is proposed. • The optimization method shows a better repeatability and more obvious regularities. • A linear relationship between permeability and compressibility is established. • Non-Darcy feature is proposed as a criterion of whether pore structure change. • Permeability might vary with particle size non-monotonically. [ABSTRACT FROM AUTHOR]

[Display omitted] • The shale gas resource potential of the Longmaxi Formation was evaluated by using mud gas isotope logging technology. • The reservoir properties of shale were evaluated based on gas isotope fractionation effects. • The shale gas in the Changning area belongs to late kerogen cracking gas. • The lower part of the Longmaxi Formation has a better shale gas exploration potential. The Longmaxi Formation in the Sichuan Basin is one of the most important shale gas producing formations in China. Previous studies of shale gas were mostly carried out on based on laboratory analyses and did not provide effective guidelines for shale gas exploration. In this paper, we present a large amount of carbon isotopic data from mud gas isotope logging and rock-cutting headspace gas in wellsites. The δ13C 1 values showed a significant decrease at the bottom of the Longmaxi Formation. The δ13C 1 and δ13C 2 values in the Changning area were observed to be heavier than those in the Weiyuan and Jiaoshiba areas. The second half of the N216H27-3 horizontal well had obvious outgassing and carbon isotope fractionation effects. This indicates that the bottom of the Longmaxi Formation has better shale gas exploration potential. The shale gas of the Longmaxi Formation in the Changning area belongs to late kerogen cracking gas, where exploration prospects are poorer than those in the Weiyuan and Jiaoshiba areas. There were more oil cracking gas resources and better reservoir conditions at the end of the N216H27-3 horizontal well; therefore, drilling should be continued at this site. [ABSTRACT FROM AUTHOR]

• High-pressure methane adsorption isotherms of 106 Wufeng-Longmaxi shales are measured. • Organic matter and clay are main compositions controlling factors of methane adsorption. • The isotherm of a shale is a linear superposition of those of its organic matter and clay. • V L , P L and ρ ads are found to be definite but different for unit organic matter and clay. • A quantitative composition-based model for adsorbed methane amount are proposed. The Wufeng-Longmaxi Formation shale in Sichuan Basin is the main strata of shale gas exploration and development in China. Adsorbed methane is an important part of the total shale gas content. The influence of shale composition on adsorption characteristics is complex, and it is difficult to obtain a comprehensive understanding without a sufficient amount of data. In this work, the total organic carbon (TOC), X-ray diffraction (XRD) mineral analysis, and the excess methane adsorption isotherms with pressure up to 50 MPa at 40 °C of 106 overmature shale samples with TOC of 0.8%-9.0% and clay content of 2%-58% that belong to Wufeng-Longmaxi formation from 10 shale gas wells in Sichuan Basin, China are experimentally investigated and analyzed. New correlations found between compositions and methane adsorption characteristic parameters guide the establishment of a composition-based methane adsorption model that the excess adsorption isotherm of shale is the content-weighted sum of equivalent unit-content excess isotherms for organic matter and clay. With this model, the differences of excess isotherms of these two compositions and the differences of clay-contribution to methane adsorption for different sublayers are disclosed. It is beneficial to improve the accuracy of shale reservoir evaluation of studied blocks under the condition of limited coring and deepening the understanding of the underlying mechanism of methane adsorption characteristics. [ABSTRACT FROM AUTHOR]

Based on low-temperature thermochronological data (i.e., apatite fission-track (AFT) and (U–Th)/He (AHe)), structural evolution, burial and thermal history, this paper examines the relationship of multi-stage evolution between the upper Ordovician Wufeng and lower Silurian Longmaxi formations (i.e., the WL formation) and rapid exhumation at the Changning shale gas field in the southern Sichuan basin. AFT ages are generally young from southeast to northwest, decreasing from ca. 40 to 15 Ma while AHe single-grain ages range from ~35 to ~5 Ma. Inverse thermal histories show that a multi-stage cooling history with initial cooling began in the Late Cretaceous to early Cenozoic (middle Eocene), followed by accelerated rapid cooling in the late Cenozoic, with cooling rates of 2–4 °C/Myr across the Changning shale gas field. In particular, thermal models of samples in the western Changning area show a substantial increase in the cooling rates, i.e., from less than 1 °C/Myr to 3–5 °C/Myr in the Miocene. Integrated with inverse T-t models of low-temperature thermochronological data, the burial history indicates a four-stage thermal evolution of the WL Formation in the Changning shale-gas field: Early Mature from the middle Silurian to middle Permian, Middle Mature from the late Permian to Late Triassic, Late Mature from the Early Jurassic to Early Cretaceous, and Over mature since the middle Cretaceous, reaching a maximum burial depth of ~6000 m and maximum temperature of 190–200 °C at ca. 70–80 Ma. This evolution further suggests that a normal hydrostatic pressure index dominated the WL Formations in the Paleozoic. The gas generation and pressure index, however, have substantially increased since the Late Jurassic, particularly from the Early to middle Cretaceous, with a maximum pressure index of 2.1, which is indicative of the main shale gas accumulation and enrichment period in the WL Formation. Post-gas-generation structural deformation, uplift, and exhumation had a significant impact on shale gas enrichment, mainly through their influence on shale gas preservation. This suggests some relationships among the higher pressure coefficient of the WL Formation, the higher productivity and total gas content of the WL Formation, a weaker post-gas-generation structural deformation, and a weaker uplift, as indicated by the erosion and burial depth across the Changning shale gas field. Due to a significantly stronger cooling and uplift that occurred the in Late Cenozoic across the western Changning area, the pressure index decreased rapidly from ~2.0 to 1.0 with a normal pressure condition, indicating the destruction of the reservation condition in the WL Formation. • New low-temperature thermochronological data was from the SE Sichuan basin. • An accelerated cooling in the late Cenozoic was found. • Post-gas-generation deformation and exhumation controlled the shale gas enrichment. [ABSTRACT FROM AUTHOR]