Search

Relative localization is a crucial functional block of any robotic swarm. We address it in a fleet of nano-drones characterized by a 10 cm-scale form factor, which makes them highly versatile but also strictly limited in their onboard power envelope. State-of-the-Art solutions leverage Ultra-WideBand (UWB) technology, allowing distance range measurements between peer nano-drones and a stationary infrastructure of multiple UWB anchors. Therefore, we propose an UWB-based infrastructure-free nano-drones swarm, where part of the fleet acts as dynamic anchors, i.e., anchor-drones (ADs), capable of automatic deployment and landing. By varying the Ads' position constraint, we develop three alternative solutions with different trade-offs between flexibility and localization accuracy. In-field results, with four flying mission-drones (MDs), show a localization root mean square error (RMSE) spanning from 15.3 cm to 27.8 cm, at most. Scaling the number of MDs from 4 to 8, the RMSE marginally increases, i.e., less than 10 cm at most. The power consumption of the MDs' UWB module amounts to 342 mW. Ultimately, compared to a fixed-infrastructure commercial solution, our infrastructure-free system can be deployed anywhere and rapidly by taking 5.7 s to self-localize 4 ADs with a localization RMSE of up to 12.3% in the most challenging case with 8 MDs.

This paper deploys and explores variants of TinyissimoYOLO, a highly flexible and fully quantized ultra-lightweight object detection network designed for edge systems with a power envelope of a few milliwatts. With experimental measurements, we present a comprehensive characterization of the network's detection performance, exploring the impact of various parameters, including input resolution, number of object classes, and hidden layer adjustments. We deploy variants of TinyissimoYOLO on state-of-the-art ultra-low-power extreme edge platforms, presenting an in-depth a comparison on latency, energy efficiency, and their ability to efficiently parallelize the workload. In particular, the paper presents a comparison between a novel parallel RISC-V processor (GAP9 from Greenwaves) with and without use of its on-chip hardware accelerator, an ARM Cortex-M7 core (STM32H7 from ST Microelectronics), two ARM Cortex-M4 cores (STM32L4 from STM and Apollo4b from Ambiq), and a multi-core platform with a CNN hardware accelerator (Analog Devices MAX78000). Experimental results show that the GAP9's hardware accelerator achieves the lowest inference latency and energy at 2.12ms and 150uJ respectively, which is around 2x faster and 20% more efficient than the next best platform, the MAX78000. The hardware accelerator of GAP9 can even run an increased resolution version of TinyissimoYOLO with 112x112 pixels and 10 detection classes within 3.2ms, consuming 245uJ. To showcase the competitiveness of a versatile general-purpose system we also deployed and profiled a multi-core implementation on GAP9 at different operating points, achieving 11.3ms with the lowest-latency and 490uJ with the most energy-efficient configuration. With this paper, we demonstrate the suitability and flexibility of TinyissimoYOLO on state-of-the-art detection datasets for real-time ultra-low-power edge inference., * The first three authors contributed equally to this research

Transformer networks have emerged as the state-of-the-art approach for natural language processing tasks and are gaining popularity in other domains such as computer vision and audio processing. However, the efficient hardware acceleration of transformer models poses new challenges due to their high arithmetic intensities, large memory requirements, and complex dataflow dependencies. In this work, we propose ITA, a novel accelerator architecture for transformers and related models that targets efficient inference on embedded systems by exploiting 8-bit quantization and an innovative softmax implementation that operates exclusively on integer values. By computing on-the-fly in streaming mode, our softmax implementation minimizes data movement and energy consumption. ITA achieves competitive energy efficiency with respect to state-of-the-art transformer accelerators with 16.9 TOPS/W, while outperforming them in area efficiency with 5.93 TOPS/mm$^2$ in 22 nm fully-depleted silicon-on-insulator technology at 0.8 V., Accepted for publication at the 2023 ACM/IEEE International Symposium on Low Power Electronics and Design (ISLPED)

Wearable biosignal processing applications are driving significant progress toward miniaturized, energy-efficient Internet-of-Things solutions for both clinical and consumer applications. However, scaling toward high-density multi-channel front-ends is only feasible by performing data processing and machine Learning (ML) near-sensor through energy-efficient edge processing. To tackle these challenges, we introduce BioGAP, a novel, compact, modular, and lightweight (6g) medical-grade biosignal acquisition and processing platform powered by GAP9, a ten-core ultra-low-power SoC designed for efficient multi-precision (from FP to aggressively quantized integer) processing, as required for advanced ML and DSP. BioGAPs form factor is 16x21x14 mm$^3$ and comprises two stacked PCBs: a baseboard integrating the GAP9 SoC, a wireless Bluetooth Low Energy (BLE) capable SoC, a power management circuit, and an accelerometer; and a shield including an analog front-end (AFE) for ExG acquisition. Finally, the system also includes a flexibly placeable photoplethysmogram (PPG) PCB with a size of 9x7x3 mm$^3$ and a rechargeable battery ($\phi$ 12x5 mm$^2$). We demonstrate BioGAP on a Steady State Visually Evoked Potential (SSVEP)-based Brain-Computer Interface (BCI) application. We achieve 3.6 uJ/sample in streaming and 2.2 uJ/sample in onboard processing mode, thanks to an efficiency on the FFT computation task of 16.7 Mflops/s/mW with wireless bandwidth reduction of 97%, within a power budget of just 18.2 mW allowing for an operation time of 15 h., Comment: 7 pages, 9 figures, 1 table, accepted for IEEE COINS 2023

Recent trends in deep learning (DL) imposed hardware accelerators as the most viable solution for several classes of high-performance computing (HPC) applications such as image classification, computer vision, and speech recognition. This survey summarizes and classifies the most recent advances in designing DL accelerators suitable to reach the performance requirements of HPC applications. In particular, it highlights the most advanced approaches to support deep learning accelerations including not only GPU and TPU-based accelerators but also design-specific hardware accelerators such as FPGA-based and ASIC-based accelerators, Neural Processing Units, open hardware RISC-V-based accelerators and co-processors. The survey also describes accelerators based on emerging memory technologies and computing paradigms, such as 3D-stacked Processor-In-Memory, non-volatile memories (mainly, Resistive RAM and Phase Change Memories) to implement in-memory computing, Neuromorphic Processing Units, and accelerators based on Multi-Chip Modules. The survey classifies the most influential architectures and technologies proposed in the last years, with the purpose of offering the reader a comprehensive perspective in the rapidly evolving field of deep learning. Finally, it provides some insights into future challenges in DL accelerators such as quantum accelerators and photonics., Preprint version of our manuscript submitted to the journal @ ACM CSUR (35 pages plus Appendix) on June 22nd, 2023

With the rise of deep learning (DL), our world braces for artificial intelligence (AI) in every edge device, creating an urgent need for edge-AI SoCs. This SoC hardware needs to support high throughput, reliable and secure AI processing at ultra-low power (ULP), with a very short time to market. With its strong legacy in edge solutions and open processing platforms, the EU is well-positioned to become a leader in this SoC market. However, this requires AI edge processing to become at least 100 times more energy-efficient, while offering sufficient flexibility and scalability to deal with AI as a fast-moving target. Since the design space of these complex SoCs is huge, advanced tooling is needed to make their design tractable. The CONVOLVE project (currently in Inital stage) addresses these roadblocks. It takes a holistic approach with innovations at all levels of the design hierarchy. Starting with an overview of SOTA DL processing support and our project methodology, this paper presents 8 important design choices largely impacting the energy efficiency and flexibility of DL hardware. Finding good solutions is key to making smart-edge computing a reality.

The interest in dynamic vision sensor (DVS)-powered unmanned aerial vehicles (UAV) is raising, especially due to the microsecond-level reaction time of the bio-inspired event sensor, which increases robustness and reduces latency of the perception tasks compared to a RGB camera. This work presents ColibriUAV, a UAV platform with both frame-based and event-based cameras interfaces for efficient perception and near-sensor processing. The proposed platform is designed around Kraken, a novel low-power RISC-V System on Chip with two hardware accelerators targeting spiking neural networks and deep ternary neural networks.Kraken is capable of efficiently processing both event data from a DVS camera and frame data from an RGB camera. A key feature of Kraken is its integrated, dedicated interface with a DVS camera. This paper benchmarks the end-to-end latency and power efficiency of the neuromorphic and event-based UAV subsystem, demonstrating state-of-the-art event data with a throughput of 7200 frames of events per second and a power consumption of 10.7 \si{\milli\watt}, which is over 6.6 times faster and a hundred times less power-consuming than the widely-used data reading approach through the USB interface. The overall sensing and processing power consumption is below 50 mW, achieving latency in the milliseconds range, making the platform suitable for low-latency autonomous nano-drones as well.

Meeting the staggering bandwidth requirements of today's applications challenges the traditional narrow and serialized NoCs, which hit hard bounds on the maximum operating frequency. This paper proposes FlooNoC, an open-source, low-latency, fully AXI4-compatible NoC with wide physical channels for latency-tolerant high-bandwidth non-blocking transactions and decoupled latency-critical short messages. We demonstrate the feasibility of wide channels by integrating a 5x5 router and links within a 9-core compute cluster in 12 nm FinFet technology. Our NoC achieves a bandwidth of 629Gbps per link while running at only 1.23 GHz (at 0.19 pJ/B/hop), with just 10% area overhead post layout.

Computing systems have shifted towards highly parallel and heterogeneous architectures to tackle the challenges imposed by limited power budgets. These architectures must be supported by novel power management paradigms addressing the increasing design size, parallelism, and heterogeneity while ensuring high accuracy and low overhead. In this work, we propose a systematic, automated, and architecture-agnostic approach to accurate and lightweight DVFS-aware statistical power modeling of the CPU and GPU sub-systems of a heterogeneous platform, driven by the sub-systems' local performance monitoring counters (PMCs). Counter selection is guided by a generally applicable statistical method that identifies the minimal subsets of counters robustly correlating to power dissipation. Based on the selected counters, we train a set of lightweight, linear models characterizing each sub-system over a range of frequencies. Such models compose a lookup-table-based system-level model that efficiently captures the non-linearity of power consumption, showing desirable responsiveness and decomposability. We validate the system-level model on real hardware by measuring the total energy consumption of an NVIDIA Jetson AGX Xavier platform over a set of benchmarks. The resulting average estimation error is 1.3%, with a maximum of 3.1%. Furthermore, the model shows a maximum evaluation runtime of 500 ns, thus implying a negligible impact on system utilization and applicability to online dynamic power management (DPM)., Lecture Notes in Computer Science, 13511, ISSN:0302-9743, ISSN:1611-3349, Embedded Computer Systems: Architectures, Modeling, and Simulation, ISBN:978-3-031-15074-6, ISBN:978-3-031-15073-9

Sparse linear algebra is crucial in many application domains, but challenging to handle efficiently in both software and hardware, with one- and two-sided operand sparsity handled with distinct approaches. In this work, we enhance an existing memory-streaming RISC-V ISA extension to accelerate both one- and two-sided operand sparsity on widespread sparse tensor formats like compressed sparse row (CSR) and compressed sparse fiber (CSF) by accelerating the underlying operations of streaming indirection, intersection, and union. Our extensions enable single-core speedups over an optimized RISC-V baseline of up to 7.0x, 7.7x, and 9.8x on sparse-dense multiply, sparse-sparse multiply, and sparse-sparse addition, respectively, and peak FPU utilizations of up to 80% on sparse-dense problems. On an eight-core cluster, sparse-dense and sparse-sparse matrix-vector multiply using real-world matrices are up to 5.0x and 5.9x faster and up to 2.9x and 3.0x more energy efficient. We explore further applications for our extensions, such as stencil codes and graph pattern matching. Compared to recent CPU, GPU, and accelerator approaches, our extensions enable higher flexibility on data representation, degree of sparsity, and dataflow at a minimal hardware footprint, adding only 1.8% in area to a compute cluster. A cluster with our extensions running CSR matrix-vector multiplication achieves 69x and 2.8x higher peak floating-point utilizations than recent CPU and GPU software, respectively., 13 pages, 7 figures. Submitted to the IEEE for review

Space Cyber-Physical Systems (S-CPS) such as spacecraft and satellites strongly rely on the reliability of onboard computers to guarantee the success of their missions. Relying solely on radiation-hardened technologies is highly expensive, and developing inflexible architectural and microarchitectural modifications to introduce modular redundancy within a system leads to significant area increase and performance degradation as well. To mitigate the overheads of traditional radiation hardening and modular redundancy schemes, we present a novel Hybrid Modular Redundancy (HMR) approach that features a cluster of RISC-V processors with a flexible on-demand dual-core and triple-core lockstep grouping of computing cores with runtime split-lock capabilities. Further, we propose two recovery approaches, software-based and hardware-based, trading off performance and area overhead. Running at 430 MHz, our fault-tolerant cluster achieves up to 1160 MOPS on a matrix multiplication benchmark when configured in non-redundant mode and 617 and 414 MOPS in dual and triple mode, respectively. A software-based recovery in triple mode requires 363 clock cycles and occupies 0.612 mm2, representing a 1.3% area overhead over a non-redundant 12-core RISC-V cluster. As a high-performance alternative, a new hardware-based method provides rapid fault recovery in just 24 clock cycles and occupies 0.660 mm2, namely ~9.4% area overhead over the baseline non-redundant RISC-V cluster. The cluster is also enhanced with split-lock capabilities to enter one of the available redundant modes with minimum performance loss, allowing execution of a safety-critical portion of code with 310 and 23 clock cycles overhead for entry and exit, respectively. The proposed system is the first to integrate these functionalities on an open-source RISC-V-based compute device, enabling finely tunable reliability vs. performance trade-offs.

Miniaturized autonomous unmanned aerial vehicles (UAVs) are an emerging and trending topic. With their form factor as big as the palm of one hand, they can reach spots otherwise inaccessible to bigger robots and safely operate in human surroundings. The simple electronics aboard such robots (sub-100mW) make them particularly cheap and attractive but pose significant challenges in enabling onboard sophisticated intelligence. In this work, we leverage a novel neural architecture search (NAS) technique to automatically identify several Pareto-optimal convolutional neural networks (CNNs) for a visual pose estimation task. Our work demonstrates how real-life and field-tested robotics applications can concretely leverage NAS technologies to automatically and efficiently optimize CNNs for the specific hardware constraints of small UAVs. We deploy several NAS-optimized CNNs and run them in closed-loop aboard a 27-g Crazyflie nano-UAV equipped with a parallel ultra-low power System-on-Chip. Our results improve the State-of-the-Art by reducing the in-field control error of 32% while achieving a real-time onboard inference-rate of ~10Hz@10mW and ~50Hz@90mW., \c{opyright} 2023 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Decentralised Machine Learning (DML) enables collaborative machine learning without centralised input data. Federated Learning (FL) and Edge Inference are examples of DML. While tools for DML (especially FL) are starting to flourish, many are not flexible and portable enough to experiment with novel processors (e.g., RISC-V), non-fully connected network topologies, and asynchronous collaboration schemes. We overcome these limitations via a domain-specific language allowing us to map DML schemes to an underlying middleware, i.e. the FastFlow parallel programming library. We experiment with it by generating different working DML schemes on x86-64 and ARM platforms and an emerging RISC-V one. We characterise the performance and energy efficiency of the presented schemes and systems. As a byproduct, we introduce a RISC-V porting of the PyTorch framework, the first publicly available to our knowledge., Published at the ACM Computing Frontiers Conference 2023

End-to-end event-based computation has the potential to push the envelope in latency and energy efficiency for edge AI applications. Unfortunately, event-based sensors (e.g., DVS cameras) and neuromorphic spike-based processors (e.g., Loihi) have been designed in a decoupled fashion, thereby missing major streamlining opportunities. This paper presents ColibriES, the first-ever neuromorphic hardware embedded system platform with dedicated event-sensor interfaces and full processing pipelines. ColibriES includes event and frame interfaces and data processing, aiming at efficient and long-life embedded systems in edge scenarios. ColibriES is based on the Kraken system-on-chip and contains a heterogeneous parallel ultra-low power (PULP) processor, frame-based and event-based camera interfaces, and two hardware accelerators for the computation of both event-based spiking neural networks and frame-based ternary convolutional neural networks. This paper explores and accurately evaluates the performance of event data processing on the example of gesture recognition on ColibriES, as the first step of full-system evaluation. In our experiments, we demonstrate a chip energy consumption of 7.7 \si{\milli\joule} and latency of 164.5 \si{\milli\second} of each inference with the DVS Gesture event data set as an example for closed-loop data processing, showcasing the potential of ColibriES for battery-powered applications such as wearable devices and UAVs that require low-latency closed-loop control.