Search

The influence of iron (Fe)-containing constituent particles on the behavior of fatigue crack initiation and propagation of Al-Cu-Li-Mg-Zr alloys has been studied using fatigue crack growth (FCG) tests and in-situ fatigue testing and detailed metallographic examination based on scanning electron microscopy. Experimental results show that the alloy with a low level of Fe content (2A97-T3 sheet) exhibited a lower density, accompanying equivalent tensile strength and FCG rate compared to the damage-tolerant 2524-T3 sheet. It was found that the fatigue b growth of both alloys is dominated by transgranular mode, accompanied by intergranular expansion, and the high level of Fe content alloy presents more characteristics of intergranular. Coarse constituent particles were detrimental to the resistance against FCG. It is postulated here that the micro-cracks formed around the coarse Fe-containing particles are merged with the primary crack to produce a bridging effect, accelerating the growth of fatigue cracks in the alloy with a high level of Fe content. [ABSTRACT FROM AUTHOR]

A non-isothermal ageing process was proposed for an Al-Zn-Mg-Cu alloy aiming to accommodate the slow heating/cooling procedure during the ageing of large components. The evolution of microstructure and microchemistry was analyzed by using transmission electron microscopy, high-angle annular dark field imaging, and energy dispersive spectrometry. The age-hardening of the alloy was examined to evaluate the strengthening behavior during the non-isothermal process. The corrosion behavior was investigated via observing the specimens immersed in EXCO solution (solution for Exfoliation Corrosion Susceptibility test in 2xxx and 7xxx series aluminum alloys, referring ASTM G34-01). Secondary precipitation was observed during the cooling stage, leading to increased precipitate number density. The distribution of grain boundary precipitates transits from discontinuous to continuous at the cooling stage, due to the secondary precipitation’s linking-up effect. The solutes’ enrichment on grain boundary precipitates and the depletion in precipitate-free zones develops during the heating procedure, but remains invariable during the cooling procedure. The corrosion in NIA (Non-isothermal Ageing) treated specimens initiates from pitting and then transits to intergranular corrosion and exfoliation corrosion. The transition from pitting to intergranular corrosion is very slow for specimens heated to 190 °C, but accelerates slightly as the cooling procedure proceeds. The transition to exfoliation corrosion is observed to be quite slow in all specimens in non-isothermal aged to over-aged condition, suggesting a corrosion resistance comparable to that of RRA condition. [ABSTRACT FROM AUTHOR]

Aim: To investigate the incidence of clinically detected port-site metastasis (PSM) in patients who underwent robotic surgery for biliary malignancies., Methods: Using a prospective database, the patients undergoing fully robotic surgery for biliary malignancies between January 2009 and January 2011 were included. Records of patients with confirmed malignancy were reviewed for clinicopathological data and information about PSM., Results: Sixty-four patients with biliary tract cancers underwent robotic surgery, and sixty patients met the inclusion criteria. The median age was 67 year (range: 40-85 year). During a median 15-mo follow-up period, two female patients were detected solitary PSM after robotic surgery. The incidence of PSM was 3.3%. Patient 1 underwent robotic anatomatic left hemihepatectomy and extraction of biliary tumor thrombi for an Klatskin tumor. She had a subcutaneous mass located at the right lateral abdominal wall near a trocar scar. Patient 2 underwent robotic pancreaticoduodenectomy for distal biliary cancer. She had two metachronous subcutaneous mass situated at the right lateral abdominal wall under a same trocar scar at 7 and 26 mo. The pathology of the excised PSM masses confirmed metastatic biliary adenocarcinoma., Conclusion: The incidence of PSMs after robotic surgery for biliary malignancies is relatively low, and biliary cancer can be an indication of robotic surgery.

Purpose: Numerous studies have evaluated the association between XRCC1 Arg399Gln gene polymorphism and hepatocellular carcinoma risk in the Chinese Han population. However, the results have been inconsistent. We therefore here examined whether the XRCC1 Arg399Gln gene polymorphism confers hepatocellular carcinoma risk by conducting a meta-analysis., Methods: PubMed, Google scholar and China National Knowledge Infrastructure databases were searched for eligible articles in English and Chinese that were published before April 2012., Results: 6 studies involving 1,246 patients with hepatocellular carcinoma and 1,953 controls were included. The association between XRCC1 Arg399Gln gene polymorphism and hepatocellular carcinoma in the Chinese Han population was significant under GG vs AA (OR = 1.48, 95% CI = 1.13 to 1.94). Limiting the analysis to the studies with controls in the Hardy-Weinberg equilibrium, the results were persistent and robust., Conclusions: In the Chinese Han population, the XRCC1 Arg399Gln gene polymorphism is associated with an increased hepatocellular carcinoma risk.

Nearly monodispersive CaF2 hollow microspheres were synthesized by a facile aqueous solution route from the mixed aqueous solutions of CaCl2, Na2WO4, and NaF at room temperature. The as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), high-resolution transmission electron microscopy, and N2 adsorption-desorption techniques. The CaF2 hollow microspheres have an average diameter of about 1.5 microm and a hollow interior of 0.5 microm. The shell is composed of numerous single-crystalline nanoparticles with diameter of about 20 nm. The morphologies and diameters of the CaF2 products are strongly dependent on the experimental parameters, such as the concentration of the aqueous NaF solution and the reaction temperature. The synthetic experiments indicate that the growth process of CaF2 hollow microspheres involves first the formation of CaWO4 solid microspheres and then the formation of CaF2 solid microspheres through the reaction between CaWO4 and F(-) ions controlled by the difference of the solubility product for CaWO4 and CaF2. Phenomenological elucidation based on TEM observations and XRD patterns of intermediate products at different precipitation stages indicates that the formation mechanism for the CaF2 hollow microspheres is related to the Ostwald ripening mechanism. N2 adsorption-desorption measurement shows that the CaF2 hollow microspheres possess a high Brunauer-Emmett-Teller surface area and porosity properties. The synthetic procedure is straightforward and represents a new example of the Ostwald ripening mechanism for the formation of inorganic hollow structures in an aqueous solution at room temperature.