Search

This study aimed to validate the automated temporal analysis of countermovement vertical jump (CMJ) using MMPose, a markerless pose estimation framework, by comparing it with the gold-standard 3D marker-based motion capture system. Twelve participants performed five CMJ trials, which were simultaneously recorded using the marker-based system and two smartphone cameras capturing both sides of the body. Key kinematic points, including center of mass (CoM) and toe trajectories, were analyzed to determine jump phases and temporal variables. The agreement between methods was assessed using Bland–Altman analysis, root mean square error (RMSE), and Pearson's correlation coefficient (r), while consistency was evaluated via intraclass correlation coefficient (ICC 3,1) and two-way repeated-measures ANOVA. Cohen's effect size (d) quantified the practical significance of differences. Results showed strong agreement (r > 0.98) with minimal bias and narrow limits of agreement for most variables. The markerless system slightly overestimated jump height and CoM vertical velocity, but ICC values (ICC > 0.91) confirmed strong reliability. Cohen's d values were near zero, indicating trivial differences, and no variability due to recording side was observed. Overall, MMPose proved to be a reliable alternative for in-field CMJ analysis, supporting its broader application in sports and rehabilitation settings. [ABSTRACT FROM AUTHOR]

Sprint performance is commonly assessed via discrete sprint tests and analyzed through kinematic estimates modeled using a mono-exponential equation, including estimated maximal sprinting speed ( M S S ), relative acceleration ( T A U ), maximum acceleration ( M A C ), and relative propulsive maximal power ( P M A X ). The acceleration–velocity profile (AVP) provides a simple summary of short sprint performance using two parameters: MSS and MAC, which are useful for simplifying descriptions of sprint performance, comparison between athletes and groups of athletes, and estimating changes in performance over time or due to training intervention. However, discrete testing poses logistical challenges and defines an athlete's AVP exclusively from the performance achieved in an isolated testing environment. Recently, an in situ AVP (velocity–acceleration method) was proposed to estimate kinematic parameters from velocity and acceleration data obtained via global or local positioning systems (GPS/LPS) over multiple training sessions, plausibly improving the time efficiency of sprint monitoring and increasing the sample size that defines the athlete's AVP. However, the validity and sensitivity of estimates derived from the velocity–acceleration method in relation to changes in criterion scores remain elusive. To assess the concurrent validity and sensitivity of kinematic measures from the velocity–acceleration method, 31 elite youth basketball athletes (23 males and 8 females) completed two maximal effort 30 m sprint trials. Performance was simultaneously measured by a laser gun and an LPS (Kinexon), with kinematic parameters estimated using the time–velocity and velocity–acceleration methods. Agreement ( % B i a s ) between laser gun and LPS-derived estimates was within the practically significant magnitude ( ± 5%), while confidence intervals for the percentage mean absolute difference ( % M A D ) overlapped practical significance for T A U , M A C , and P M A X using the velocity–acceleration method. Only the M S S parameter showed a sensitivity ( % M D C 95 ) within practical significance (<5%), with all other parameters showing unsatisfactory sensitivity (>10%) for both the time–velocity and velocity–acceleration methods. Thus, sports practitioners may be confident in the concurrent validity and sensitivity of M S S estimates derived in situ using the velocity–acceleration method, while caution should be applied when using this method to infer an athlete's maximal acceleration capabilities. [ABSTRACT FROM AUTHOR]

With innovative portable force plate systems being widely implemented for lower-body neuromuscular performance assessment in an applied sports setting and the existing gap in the scientific literature regarding player performance during in-game competitive scenarios, the purpose of the present study was to compare changes in countermovement vertical jump (CVJ) performance pre-post a simulated 3×3 basketball tournament. Seven current or former members of a 3×3 national basketball team volunteered to participate in the present investigation. Upon completing standardized warm-up procedures, athletes stepped on a uni-axial force plate system sampling at 1,000 Hz and performed three maximal-effort CVJs with no arm swing. Then, the athletes proceeded to play a simulated 3×3 basketball tournament composed of two consecutive games, separated by a 15-min rest interval. Immediately following the completion of the second game, the identical CVJ testing procedures were repeated. Paired sample t-tests were used to examine prepost-tournament differences in nineteen CVJ performance metrics (p < 0.05). The results reveal that force-time metrics during both eccentric and concentric phases of the CVJ remain relatively unchanged pre-post simulated 3×3 basketball tournament. However, multiple force-time metrics within the eccentric phase of the CVJ changed by 12.1%-19.1% (e.g., eccentric peak power and peak velocity, eccentric duration), suggesting that the eccentric phase of CVJ might be responsive to performance stimulus to a greater extent than the concentric phase. Overall, these findings further support the importance of comprehensive CVJ analysis when intending to measure changes in neuromuscular performance. [ABSTRACT FROM AUTHOR]

Introduction: Advances in motion capture technology include markerless systems to facilitate valid data collection. Recently, the technological reliability of this technology has been reported for human movement assessments. To further understand sources of potential error, biological reliability must also be determined. The aim of this study was to determine the day-to-day reliability for a three-dimensional markerless motion capture (MMC) system to quantify 4 movement analysis composite scores, and 81 kinematic variables. Methods: Twenty-two healthy men (n = 11; ... + SD; age = 23.0 ± 2.6 years, height = 180.4.8 cm, weight = 80.4 ± 7.3 kg) and women (n = 11; age = 20.8 ± 1.1 years, height = 172.2 ± 7.4 cm, weight = 68.0 ± 7.3 kg) participated in this study. All subjects performed 4 standardized test batteries consisting of 14 different movements on four separate days. A three-dimensional MMC system (DARI Motion, Lenexa, KS) using 8 cameras surrounding the testing area was used to quantify movement characteristics. 1 x 4 RMANOVAs were used to determine significant differences across days for the composite movement analysis scores, and RM-MANOVAs were used to determine test day differences for the kinematic data (p < 0.05). Intraclass correlation coefficients (ICCs) were reported for all variables to determine test reliability. To determine biological variability, mean absolute differences from previously reported technological variability data were subtracted from the total variability data from the present study. Results: No differences were observed for any composite score (i.e., athleticism, explosiveness, quality, readiness; or any of the 81 kinematic variables. Furthermore, 84 of 85 measured variables exhibited good to excellent ICCs (0.61-0.99). When compared to previously reported technological variability data, 62.3% of item variability was due to biological variability, with 66 of 85 variables exhibiting biological variability as the primary source of error (i.e., >50% total variability). Discussion: Combined, these findings effectively add to the body of literature suggesting sufficient reliability for MMC solutions in capturing kinematic features of human movement. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the acute effects of lower limb wearable resistance on maximal horizontal deceleration biomechanics, across two different assessments. Twenty recreationally trained team sport athletes performed acceleration to deceleration assessments (ADA), and 5-0-5 change of direction (COD) tests across three load conditions (unloaded, 2% of BW, 4% of body weight (BW)), with load attached to the anterior and posterior thighs and shanks. Linear mixed effect models with participant ID as the random effect, and load condition as the fixed effect were used to study load-specific biomechanical differences in deceleration mechanics across both tests. Primary study findings indicate that for the ADA, in the 4% BW condition, participants exhibited significantly greater degrees of Avg Approach Momentum, as well as significant reductions in deceleration phase center of mass (COM) drop, and Avg Brake Step ground contact deceleration (GCD) in both the 2% BW, and 4% BW condition, compared to the unloaded condition. In the 5-0-5 tests, participants experienced significant reductions in Avg Approach Velocity, Avg deceleration (DEC), and Stopping Time in the 4% BW condition compared to the unloaded condition. Similar to the ADA test, participants also experienced significant reductions in Avg Brake Step GCD in both the 2% BW and 4% BW conditions, and significant increases in Avg Approach Momentum in the 4% BW condition, compared to the unloaded condition. Therefore, findings suggest that based on the test, and metric of interest, the addition of lower limb wearable resistance led to acute differences in maximal horizontal deceleration biomechanics. However, future investigations are warranted to further explore if the use of lower limb wearable resistance could present as an effective training tool in enhancing athlete's horizontal deceleration and change of direction performance. [ABSTRACT FROM AUTHOR]

Sleep has been recognized as one of the most essential recovery methods necessary for achieving optimal performance. However, there is still a lack of scientific literature focused on examining its impact on one of the most prevalent skills in the game of basketball, the countermovement vertical jump (CVJ). Therefore, the purpose of the present study was to examine the relationship between sleep quality and quantity, and lower-body neuromuscular performance characteristics within a cohort of semiprofessional male basketball players. Twenty-eight athletes competing in a first-tier regional league in Serbia volunteered to participate in this investigation. Upon arrival at the gym, all athletes completed the Pittsburgh Sleep Quality Index (PSQI) self-rated questionnaire. Immediately after completion of the PSQI, each athlete stepped on a force plate system and performed three maximum-effort CVJs with no arm swing. The following force-time metrics were obtained for the analysis: eccentric and concentric absolute and relative mean and peak force and power, vertical jump height, and reactive strength index-modified. Pearson product-moment correlation coefficients were used to examine the strength of the linear relationships between sleep quality and quantity and lower-body neuromuscular performance characteristics (p < 0.05). The results indicated that sleep quality appears to have a greater impact on the concentric than the eccentric phase of the CVJ (e.g., concentric mean force [r = -0.830; p < 0.001], relative concentric peak force [r = -0.466; p = 0.013, eccentric mean power (r = -0.162; p = 0.409)], while no significant relationship was found between sleep quantity and lower-body neuromuscular performance (e.g., concentric peak force [r = -0.055; p = 0.782], relative eccentric mean power [r = -0.301; p = 0.107]). Overall, these findings offer valuable insights into the importance of good sleep hygiene (e.g., efficiency, duration) in an athletic population, and can help practitioners develop more effective training and recovery programs. [ABSTRACT FROM AUTHOR]

One of the reoccurring questions that arises during the countermovement vertical jump (CVJ) assessment is whether the learning effect has an impact on the accuracy of the results obtained. Thus, the purpose of the present investigation was to examine the impact of the short-term learning effect on the assessment of lower-body neuromuscular performance characteristics when performed on a portable one-dimensional force plate system. Sixteen recreationally active college-age males volunteered to participate in the present study. Each participant completed four sets of three non-consecutive CVJs with no arm swing throughout a single day. Besides strong verbal encouragement, participants were constantly instructed to focus on pushing the ground as explosively as possible. Fourteen force-time metrics were selected for CVJ performance analysis purposes: eccentric and concentric peak and mean force and power, eccentric and concentric duration, contraction time, jump height, reactive strength index-modified, and countermovement depth. Repeated measures multivariate analysis of variance was used to examine statistically significant differences across four testing time points (p < 0.05). The results indicate an absence of any meaningful differences across four testing time points in force-time metrics of interest during both eccentric and concentric phases of the CVJ. Moreover, no differences were observed in CVJ outcome metrics such as countermovement depth, suggesting that the movement strategy tends to remain consistent. Overall, these findings reveal that CVJ test repeatability is not affected by the short-term learning effect and that data are stable at least within the scope of this study and within this population. [ABSTRACT FROM AUTHOR]

Introduction: With recent increases in the popularity of studying the physical construct of horizontal deceleration performance in team-sport athletes, the aim of the present study was to assess the inter-rater and intra-rater reliability of processing and quantifying horizontal deceleration ability using radar technology. Methods: Data from 92 NCAA Division 1 athletes from two different athletic teams (American football and Lacrosse) were used for the present investigation. All athletes performed two trials of the modified acceleration to deceleration assessment (ADA), which consisted of a maximal 10 m sprint acceleration, followed by a rapid deceleration. Four individual raters manually processed raw, radar-derived instantaneous velocity data for the ADA, and an automated script was used to calculate metrics of interest. Results: Primary study findings suggest moderate to excellent levels of agreement (ICC = 0.56-0.91) for maximal horizontal deceleration metrics between the four individual raters. The intra-rater analyses revealed poor to excellent consistency (ICC = 0.31-0.94) between ADA trials, with CV%'s ranging from 3.1% to 13.2%, depending on the respective metric and rater. Discussion: Our data suggests that if a foundational understanding and agreement of manual data processing procedures for radar-derived data is given between raters, metrics may be interpreted with moderate to excellent levels of confidence. However, when possible, and when using the Stalker ATS radar technology, authors recommend that practitioners use one trained individual to manually process raw data. Ideally, this process should become fully automated, based on selected filters or algorithms, rather than the subjectivity of the rater. [ABSTRACT FROM AUTHOR]

Considering the importance of body composition and lower-body strength and power for basketball players' on-court performance, as well as a lack of sports science research focused on female athletes, the purpose of the present investigation was to record the anthropometric and countermovement vertical jump (CMJ) characteristics of top-tier U16 and U18 female basketball players and examine between-group differences in the aforementioned tests. Thirty-two athletes who were a part of the national basketball academy volunteered to participate in the present investigation. Following the body composition assessment conducted via a segmental multifrequency bioimpedance analyzer, athletes performed three CMJs while standing on a force plate system sampling at 1000 Hz. Independent t-test and Mann-Whitney U-test were used to examine between-group differences. The findings reveal significant differences in body composition and lower-body neuromuscular performance characteristics between female basketball players ages 16 and 18. Although no differences were observed in muscle and body fat percentages, the U18 group had significantly greater height, overall body mass (both muscle and fat mass), as well as greater segmental fat-free mass (trunk, both legs and arms), intracellular and extracellular water, and body mass index when compared to their U16 counterparts. On the other hand, the U18 group demonstrated longer eccentric, concentric, and braking phase duration, as well as overall contraction time when compared to the U16 players. In addition, the U18 athletes exhibited higher eccentric mean force and power, concentric impulse, peak power, and mean and peak force. [ABSTRACT FROM AUTHOR]

As technology within elite basketball advances and is more available to sporting organizations, novel approaches for assessing and addressing athletic performance during practice or competition are being continuously explored. The aim of this investigation was to examine changes in neuromuscular performance during live basketball play. Eight professional male basketball players volunteered to participate in this study. The testing procedures were conducted during a pre-tournament camp over a span of 2 days. During the first day, the athletes were familiarized with the testing procedures, and baseline measurements were obtained. Using a uniaxial force plate system sampling at 1,000 Hz, each athlete performed 3 countermovement vertical jumps (CVJ) without an arm swing before proceeding with their regular training activities. During the second day of the pre-tournament camp, the athletes repeated identical CVJ testing procedures before the start of the first quarter and post-first, second, third, and fourth quarter of a simulated 5- on-5 basketball game. Repeated-measures testing design was used to examine statistically significant differences in various forcetime metrics of interest in comparison to the baseline levels (p, 0.05). Besides a trivial decrease in eccentric mean force, the findings of this study revealed no statistically significant changes in any force-time metrics of interest within both eccentric and concentric phases of the CVJ (i.e., mean and peak force and power, jump height, impulse, velocity, and contraction time). Thus, we can conclude that these variables were not sensitive to acute fatigue, suggesting that the neuromuscular performances of professional male basketball players tend to remain unchanged throughout a 5-on-5 simulated game. [ABSTRACT FROM AUTHOR]

With innovative force plate technology being available to many sports organizations worldwide that allow for time-efficient in-depth neuromuscular performance assessment, the purpose of the present study was to examine the relationship between some of the most commonly analyzed countermovement vertical jump (CVJ) force-time metrics and basketball playing time and efficiency. Twenty-four professional male basketball players volunteered to participate in the present study. The CVJ testing procedures were conducted within the first quarter of the competitive season span. Following a standardized warm-up protocol, each athlete stepped on a dual uni-axial force plate system sampling at 1,000 Hz and performed three maximum-effort CVJs with no arm swing. To minimize the possible influence of fatigue, each jump trial was separated by a 10–15 s rest interval and the average value across three jumps was used for performance analysis purposes. Basketball playing efficiency and average playing time were obtained at the end of the regular season competitive period from the coaching staff records and the official team records. Pearson product-moment correlation coefficients (r) were used to examine the strength of the relationships between force-time metrics and basketball playing time and efficiency, separately for each dependent variable (p < 0.05). A significant positive association was observed between playing efficiency and eccentric mean force and eccentric mean and peak power (r = 0.406–0.552). Similarly, an increase in eccentric mean power was positively correlated with the number of minutes played during the competitive season (r = 0.464). Moreover, the aforementioned relationship remained present even when eccentric mean power was expressed relative to the player’s body mass (r = 0.406). Thus, the findings of the present study indicate that, at the professional level of men’s basketball competition, CVJ eccentric strength and power have a positive impact on both playing time and efficiency. [ABSTRACT FROM AUTHOR]

The purpose of the present study was to examine differences in game-related statistics between winning and losing game outcomes and determine which performance parameters have the greatest impact in classifying winning from losing game outcomes at the National Collegiate Athletic Association (NCAA) Division-I men's basketball level of competition. The data scraping technique was used to obtain publicly available data over a 2018-2019 season span. The total number of games examined was 5,147. Independent t-tests were used to examine statistically significant differences between winning and losing game outcomes, while a full model discriminant function analysis was used to determine the relative contribution of each game-related statistic and its ability to classify winning from losing game outcomes (p < 0.05). Alongside scoring a greater number of points at the end of the game, the findings of the present study indicate that winning teams: (a) attempted and made more field goals, three-point, and free-throw shots, (b) accumulated more defensive and total rebounds, assists, steals, and blocks, (c) had fewer turnovers and personal fouls, and (d) secured greater field goal, three-point, and free-throw shooting percentage. Moreover, the top three performance parameters discriminating winning from losing game outcomes were field goal percentage, defensive rebounds, and assists, accounting for 16.8%, 12.2%, and 12.0% of the total percentage of explained variance, respectively (i.e., 41.0% combined). Overall, these findings support the expected roles of offensive and defensive gamerelated statistics and provide further insight into how they work together to optimize the chances of securing the desired game outcome. [ABSTRACT FROM AUTHOR]

Given its fast-growing popularity and unique on-court competitive demands, 3 × 3 basketball has captured a considerable amount of attention over recent years. However, unlike research focused on studying 5 × 5 basketball players, there is a lack of scientific literature focused on examining countermovement vertical jump (CMJ) and sprint performance characteristics of 3 × 3 athletes. Thus, the purpose of the present study was to compare force-time metrics during both eccentric and concentric phases of the CMJ and acceleration and deceleration capabilities between 3 × 3 and 5 × 5 top-tier professional male basketball athletes. Ten 3 × 3 and eleven 5 × 5 professional basketball players volunteered to participate in the present study. Upon completion of a standardized warm-up, each athlete performed three maximum-effort CMJs, followed by two 10 m sprints. A uni-axial force plate system sampling at 1,000 Hz was used to analyze CMJ force-time metrics and a radar gun sampling at 47 Hz was used to derive sprint acceleration-deceleration measures. Independent t-tests and Hedge's g were used to examine between-group statistically significant differences (p<0.05) and effect size magnitudes. The findings of the present study reveal that 3 × 3 and 5 × 5 professional male basketball players tend to display similar neuromuscular performance characteristics as no significant differences were observed in any force-time metric during both eccentric and concentric phases of the CMJ (g=0.061-0.468). Yet, prominent differences were found in multiple measures of sprint performance, with large effect size magnitudes (g = 1.221-1.881). Specifically, 5 × 5 basketball players displayed greater average and maximal deceleration and faster time-to-stop than their 3 × 3 counterparts. Overall, these findings provide reference values that sports practitioners can use when assessing athletes' CMJ and sprint performance capabilities as well as when developing sport-specific training regimens to mimic on-court competitive demands. [ABSTRACT FROM AUTHOR]

Given the complex nature of the handball as a game, players are required to possess a distinct set of physical and physiological attributes to attain peak performance. With the countermovement vertical jump (CVJ) being widely implemented as a non-invasive and time-efficient testing modality in sports settings, the purpose of the present study was twofold: (a) to establish a CVJ profile of professional female handball players and (b) to examine differences in force-time metrics between starters and non-starters. Forty-two professional female handball players (e.g., SuperLeague) volunteered to participate in this study. Each athlete performed three maximum-effort CVJs with no arm swing while standing on a uni-axial force plate system sampling at 1,000 Hz. Independent t-tests were used to examine differences in each variable between starters and non-starters. The results revealed that starters attained superior performance within the eccentric phase of the CVJ when compared to non-starters, particularly in terms of eccentric peak velocity (-0.957 ± 0.242 vs. -0.794 ± 0.177 m·s-1), eccentric mean power (320.0 ± 77.7 vs. 267.1 ± 75.2 W), and eccentric peak power (929.0 ± 388.1 vs. 684.4 ± 214.2 W). While not reaching the level of statistical significance, moderate-tolarge effect sizes were observed for concentric impulse, peak velocity, and mean and peak force and power, all in favor of players included in the starting lineup (g = 0.439-0.655). Overall, these findings suggest that at the top-tier level of handball competition, the ability to secure a spot in a starting lineup may be possibly influenced by the athlete's eccentric performance capabilities. Thus, the development of lower-body eccentric strength and power may positively impact on-court athlete performance and ultimately help the team secure the desired game outcome. [ABSTRACT FROM AUTHOR]

Short sprints are predominantly assessed using timing gates and analyzed through parameters of the mono-exponential equation, including estimated maximal sprinting speed ( M S S ) and relative acceleration ( T A U ), derived maximum acceleration (MAC), and relative propulsive maximal power ( P M A X ), further referred to as the No Correction model. However, the frequently recommended flying start technique introduces a bias during parameter estimation. To correct this, two additional models (Estimated TC and Estimated FD) were proposed. To estimate model precision and sensitivity to detect the change, 31 basketball players executed multiple 30 m sprints. Athlete performance was simultaneously measured by a laser gun and timing gates positioned at 5, 10, 20, and 30 m. Short sprint parameters were estimated using a laser gun, representing the criterion measure, and five different timing gate models, representing the practical measures. Only the MSS parameter demonstrated a high agreement between the laser gun and timing gate models, using the percent mean absolute difference ( % M A D ) estimator ( % M A D < 10%). The MSS parameter also showed the highest sensitivity, using the minimum detectable change estimator ( % M D C 95 ), with an estimated % M D C 95 < 17%. Interestingly, sensitivity was the highest for the No Correction model ( % M D C 95 < 7%). All other parameters and models demonstrated an unsatisfying level of sensitivity. Thus, sports practitioners should be cautious when using timing gates to estimate maximum acceleration indices and changes in their respective levels. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the relationship between external workload exposure and changes in countermovement jump force-time characteristics over the course of an entire basketball season, in a sample of National Collegiate Athletic Association Division I, female, basketball players. Data for 12 players were retrospectively analyzed, with external workload being quantified by means of an exponentially weighted, acute, and chronic workload, as well as an acute:chronic workload ratio derived from an inertial measurement unit--based system worn by athletes for all practices and games during the regular season. Countermovement jumps were performed on a total of 26 test days over the span of the in-season competitive period. To statistically analyze these relationships, and to account for multiple observations of the same athletes in a data set, linear mixed-effects models with athlete identity (ID) intercept as the random effect were used. Study findings suggested that associations between external workload exposure and respective force-time characteristics after controlling for the random effect of athlete ID were dependent on the specific metric or metric subgroup used, as well as the type of workload exposure (e.g., acute vs. chronic). Force-time signatures from the braking phase (e.g., average braking force) seemed to be particularly associated with higher degrees of acute workload exposure, whereas strategy-based metrics such as countermovement depth showed significant associations with chronic workload exposure. Furthermore, model results suggested the importance of analyzing neuromuscular responses to external workload on an individual basis, rather than across an entire team. Findings might help practitioners in their selection process related to metrics of interest in monitoring neuromuscular fatigue and readiness. [ABSTRACT FROM AUTHOR]

Cabarkapa, DV, Cabarkapa, D, Philipp, NM, and Fry, AC. Competitive season-long changes in countermovement vertical jump force-time metrics in female volleyball players. J Strength Cond Res 38(2): e72-e77, 2024--Although force plates remain one of the most widely used tools for neuromuscular performance assessment in applied sports-specific settings, there is still a lack of scientific literature focused on studying changes in countermovement vertical jump (CVJ) performance in team sports such as volleyball, especially within the female athlete population. Thus, the purpose of the present study was to examine season-long neuromuscular performance changes in volleyball players. Eighteen National Association of Intercollegiate Athletics Division-I collegiate female athletes performed 3 maximal-effort CVJs while standing on a uniaxial force plate system sampling at 1,000 Hz at 5 different testing timepoints throughout a competitive season span (;11 weeks). The testing sessions were separated 2-3 weeks apart and performed at the approximately same time of the day (12:00 hours). Repeated-measures analysis of variance revealed that both concentric and eccentric force-time metrics remain relatively unchanged throughout a regular season span (e.g., concentric peak force and power, eccentric impulse and duration). However, the eccentric metrics such as peak and mean power and peak velocity displayed a slight improvement after a brief tapering period purposely implemented before the post-season competition to optimize the athlete's recovery (;15, 18, and 14% increase, respectively). In addition, the outcome metrics such as vertical jump height and reactive strength index-modified did not display notable fluctuations across the competitive season span. These findings can help coaches, sports scientists, and strength and conditioning practitioners to obtain a deeper insight into collegiate female athletes' force-time characteristics that may aid with developing adequate training regimens targeted toward optimizing on-court performance. [ABSTRACT FROM AUTHOR]

Lower-body strength and power are commonly measured performance qualities across a number of sports. In recent years, more attention has been given to relationships, primarily between lower-body strength and linear speed performance. While still limited, evidence is in agreement that lower-body strength positively contributes to linear speed performance. However, what is less well understood is if there comes a point in an athlete's development, at which, further working on increasing maximal strength may not fully compliment additional gains in speed performance. Within this study, authors aimed to provide practitioners with lower-body strength and power thresholds that can discriminate between slow and fast performers, within a group of collegiate American football players. The sample was further divided into a high-body and low-body weight group, and authors hypothesized that by using logistic regression, supplemented with receiver operator curve analyses, optimal cut-off points (i.e., relative lower-body strength thresholds) that are able to significantly discriminate between slow and fast linear speed performers may be identified. Findings indicate that optimal cut-off scores differed between the groups of athletes, as well as the lower body strength and power tests. All models were able to significantly distinguish between slower and faster performers, and area under the curve values ranged from 0.695 to 0.903. Although thresholds will likely vary based on factors such as sex, training age, and sport, findings from this investigation may be used to benchmark athletes and to further individualize training aimed at improving linear speed performance. [ABSTRACT FROM AUTHOR]

While various quantifiable physical attributes have been found to contribute to athletes' performance, there is a lack of scientific literature focused on examining how they relate to success during competition performance. The aim of this study was to investigate different countermovement jump (CMJ)-derived force–time characteristics and their utility in distinguishing high from low performers within a measure of on-court contribution (i.e., minutes per game played). Twenty-nine collegiate athletes (n = 15 males and n = 14 females) volunteered to participate in this investigation and performed CMJs on dual force plates sampling at 1000 Hz, weekly over the course of their basketball season. The athletes' average of their three best test-days across the season was used for further analysis. To identify their on-court contribution, athletes were divided into groups with high and low minutes per game, based on a median-split analysis. The findings suggest that at the overall group level (i.e., both genders), the modified reactive strength index (mRSI) and braking rate of force development (RFD) revealed the greatest between-group magnitudes of difference, with athletes playing more minutes per game showing greater performance. At the team-specific level, the braking RFD, average braking velocity, and mRSI were shown to be the greatest differentiators between groups for the men's team. The women's high-minutes group displayed greater magnitudes of mRSI and jump height. By identifying the neuromuscular qualities seen in top performers within their respective populations, the attributed physical performance underpinning these qualities may be identified, providing practitioners with insights into physical performance qualities and training methodologies that have the potential to influence basketball performance. [ABSTRACT FROM AUTHOR]

Cabarkapa, D, Cabarkapa, DV, Philipp, NM, Knezevic, OM, Mirkov, DM, and Fry, AC. Pre-post practice changes in countermovement vertical jump force-time metrics in professional male basketball players. J Strength Cond Res 37(11): e609-e612, 2023--Despite the countermovement vertical jump (CVJ) being one of the most popular noninvasive and time-efficient methods for monitoring neuromuscular status, there is a lack of scientific literature focused on examining fatigue-induced alterations in performance in elite athletes. Thus, the purpose of this study was to examine changes in force-time metrics pre-post practice in professional male basketball players. Seventeen athletes competing in first-tier and second-tier national basketball leagues in Europe participated in this study. While standing on a uniaxial force plate sampling at 1,000 Hz, each athlete completed 3 CVJs pre-practice and post-practice. The practice consisted of individual and team shooting drills, position-specific player development drills, 5-on-0 offensive actions, and 5-on-5 play, including full-court transition (;2 hours). The findings reveal that pre-post practice changes in force-time metrics seemto be phase specific. Despite a trivial increase in eccentric mean force (920.4 6 100.2, 929.4 6 100.0 N), most changes were observed within the concentric phase of the CVJ. The concentric phase duration increased pre-post practice (0.233 6 0.027, 0.242 6 0.033 seconds), whereas concentric impulse (262.9618.8, 258.6621.6 N·s), peak velocity (2.9360.22, 2.8660.22m·s21), mean force (2052.46179.2, 2002.76188.2 N), mean power (3,165.56269.5, 3,030.96326.8W), and peak power (5,523.46607.3, 5,246.6 6663.7W) experienced a significant decrease. Moreover, alongside longer contraction time(0.66360.065, 0.68660.074 seconds), lower vertical jump height (41.0 6 6.8, 38.9 6 6.6 cm) and reactive strength index-modified (0.634 6 0.113, 0.579 6 0.111 m·s21) values were observed post-practice. Overall, these findings may allow practitioners to detect fatigue-induced changes in CVJ forcetime metrics in professional male basketball players that can ultimately improve the acute and longitudinal training-adaptation monitoring process. [ABSTRACT FROM AUTHOR]

Although different strategies have been implemented to manage recovery-fatigue status in athletes, there is still a lack of consensus on which recovery protocols have the greatest impact and effectiveness when implemented with basketball players, including both physiological and psychological recovery methods. Thus, the purpose of this systematic review is to: (a) determine which recovery methods attain the greatest benefit in restoring the process of attenuating fatigue and (b) provide sports practitioners with guidelines on how some of the most effective recovery strategies can be used to optimize athletes' recovery and ultimately enhance their performance. Using the PRISMA guidelines, a total of 3931 research reports were obtained through four database searches (i.e., PubMed, Scopus, Cochrane, and Web of Science), from which only 25 met the inclusion and exclusion criteria. The recovery protocols analyzed in this systematic review were: sleep, nutrition, hydration, ergogenic aids, cold-water immersion, compression garments, massage, acupuncture, tapering, mindfulness, and red-light irradiation. The results revealed that all recovery strategies are capable of attenuating fatigue and enhancing recovery in basketball players to a certain degree. However, an individualized approach should be promoted, where a combination of proactive recovery modalities appears to result in the most rapid rates of recovery and athletes' ability to maintain high-level performance. Recovery should be programmed as an integral component of training regimens. Also, cooperation and communication between coaches, players, and the rest of the team staff members are essential in minimizing the risk of non-functional overreaching or injury and optimizing basketball players' on-court performance. [ABSTRACT FROM AUTHOR]

Quantifying both external and internal training loads that athletes are exposed to during training sessions is often recommended to assess multifactorial sport-specific demands. Thus, the purpose of the present study was to determine the relationship between a widely used subjective marker of internal load (rate of perceived exertion - RPE) and external load variables obtained from an innovative inertial measurement unit (IMU) device within a cohort of professional male basketball players. Twenty-one athletes competing in the firstand second-tier national basketball leagues in Europe wore an IMU device (i.e., VertTM) during their regular practice session and reported an RPE score (Borg CR-10 scale) immediately post-practice. The findings of this study reveal the presence of a strong significant relationship (r = 0.714) between Stress and RPE. However, weak non-significant relationships (r = 0.198-0.287) were observed between RPE and all jumprelated metrics (Jumps, Jumps 15+, Jumps 20+, Average Jump Height) as well as Active Minutes (r = 0.330), indicating that an increase in internal load is more dependent on the type of activity that players perform rather than the duration of the practice session. Overall, these findings may help sports scientists and strength and conditioning practitioners detect changes in training load throughout a competitive season in male basketball players and ultimately improve the acute and chronic training-adaptation monitoring process. [ABSTRACT FROM AUTHOR]

Postactivation performance enhancement has been reported for multijoint resistance exercise, with both neural and intrinsic muscle mechanisms suggested as contributing factors. The purpose of this investigation was to examine whether regulatory light-chain (RLC) phosphorylation in a primary mover is associated with enhanced weightlifting performance. Nine male athletes performed 15 sets of 3 repetitions of a multijoint weightlifting activity (clean pull) at 85% 1 repetition maximum. Measures of performance, peak barbell velocity (PV), and average barbell power (AP) were determined by video analysis. Muscle biopsies were taken within 30-60 seconds of completion of the previous lifting set from the vastus lateralis before (PRE), during (MID), and after (POST) a training session. AP was significantly greater for sets 3, 4, and 5 compared with set 1, with large effect sizes (0.8-1.0). Increases in PV did not reach significance; however, the effect size increase for sets 3 and 4 versus set 1 was moderate (0.4). Relative change scores for AP and RLC phosphorylation were positively and negatively correlated at MID (r = 0.60; p = 0.05) and POST (r = -0.74; p = -0.01) exercise, respectively. These data suggest that RLC phosphorylation initially may be associated with postactivation performance enhancement during repeated multijoint exercise. [ABSTRACT FROM AUTHOR]

Basketball is a sport that is characterized by various physical performance parameters and motor abilities such as speed, strength, and endurance, which are all underpinned by an athlete's efficient use of the stretch-shortening cycle (SSC). A common assessment to measure SSC efficiency is the countermovement jump (CMJ). When performed on a force plate, a plethora of different force-time metrics may be gleaned from the jump task, reflecting neuromuscular performance characteristics. The aim of this study was to investigate how different CMJ force-time characteristics change across different parts of the athletic year, within a sample of elite collegiate male basketball players. Twelve basketball players performed CMJ's on near-weekly basis, combining for a total of 219 screenings. The span of testing was broken down into four periods: pre-season, non-conference competitive period, conference competitive period, and post-season competitive period. Results suggest that basketball players were able to experience improvements and maintenance of performance with regards to various force-time metrics, transitioning from the pre-season period into respective later phases of the in-season period. A common theme was a significant improvement between the pre-season period and the non-conference period. Various force-time metrics were subject to change, while outcome metrics such as jump height remained unchanged, suggesting that practitioners are encouraged to more closely monitor how different force-time characteristics change over extended periods of time. [ABSTRACT FROM AUTHOR]

Given the multidirectional nature of the sport, handball athletes must frequently perform high-intensity decelerations to avoid defenders, generate space, or perform directional changes. The aim of the present study was twofold: (i) to investigate different kinematic measures of horizontal deceleration performance by comparing the acceleration-deceleration assessment (ADA) with the 5-0-5 test and (ii) to investigate relationships between force-time characteristics derived from the countermovement vertical jump (CVJ) and measures of horizontal deceleration performance. Eleven female handball players competing in the first-tier professional league in Europe performed three CVJs while standing on a uni-axial force plate system sampling at 1000 Hz, followed by two ADAs (i.e., maximal-effort acceleration over a 10 m distance, followed by rapid deceleration) and 5-0-5 test trials. Tripod-mounted radar sampling at 47 Hz, placed 5 m behind the start line, was used to record horizontal velocity data. Each test was separated by a 5–7 min rest interval to minimize the influence of fatigue. No statistically significant differences were found in horizontal deceleration performance parameters between ADA and the 5-0-5 test. However, athletes with a higher CVJ height and reactive strength index-modified showed better performance in terms of horizontal deceleration measures such as maximal approach velocity and average and maximal deceleration. Overall, these results may be of interest to practitioners working with multidirectional sport athletes such as handball players as they provide critical insight for the selection of assessments and training strategies targeted toward optimizing on-court athlete performance. [ABSTRACT FROM AUTHOR]

The isometric mid-thigh pull test permits the collection of multiple metrics related to athletic performance, such as peak force (PF), time to peak force (TTPF), and force at specific time points (e.g., 100, 150, 200 ms). However, practitioners are often constrained to a weight room setting due to the stationary nature of squat racks, making field-based athlete testing difficult. The purpose of this study was to compare force-time variables collected during a maximal effort isometric mid-thigh pull performed within a custom-built squat rack and barbell-based system (IMTP) to an isometric pull performed on a dual-handle portable device (DHP). A commercially available force platform (Sparta Science, Menlo Park, CA, USA) which samples at a rate of 1,000Hz was utilized in both conditions. Twenty recreationally active individuals with ≥2 years (Mean±SD; 7.1±2.3 yrs) of resistance training experience participated in the present study. Following a standardized warm-up participants performed three maximal effort isometric tests on both the IMTP and DHP, in a randomized counterbalanced manner. A large correlation was observed for PF (r=0.844, p<0.001), with no significant difference between systems (IMTP = 2107.9 ± 509.8, DHP = 2005.2 ± 543.7 N). However, PF values showed 5% systematic error for DHP. In addition, Force at 250 ms significantly differed (IMTP = 1474.8 ± 418.8, DHP = 1220.2 ± 380.6 N, p=0.003). Lastly, TTPF varied between systems (IMTP = 2.2 ± 1.2, DHP = 2.9 ± 0.9 s, p=0.012) and was not significantly correlated (r=0.343). Isometric strength testing using DHP appears to be a near valid method for the assessment of maximal effort isometric strength. Kinetic measures from portable rigs should be interpreted with caution when compared to IMTP. [ABSTRACT FROM AUTHOR]

The purpose of the present study was to examine differences in kinematic characteristics between (a) proficient and non-proficient two-point and three-point shooters, (b) made and missed two-point and three-point shots within a proficient group of shooters, and (c) shots attempted from two-point and three-point shooting distances. Eighteen recreationally active females with previous basketball playing experience attempted 10 two-point (5.10 m) and 10 three-point shots (6.32 m) while facing directly to the basket. To eliminate the possible influence of fatigue, each shot was separated by a 5–10 s rest interval. Participants who made ≥50% of their two-point and ≥40% of their three-point shooting attempts were classified as proficient. A high-definition video camera recording at 30 fps and video analysis software (Kinovea) were used to obtain the kinematic variables of interest during both the preparatory phase (PP) and release phase (RP) of the shooting motion. The results indicate that proficient two-point shooters attained less hip and shoulder flexion during the PP and had greater release height and vertical displacement during the RP. Hip angle differentiated made from missed two-point shots within the proficient group of shooters, with made shots being depicted by less hip flexion. Significantly greater vertical displacement was observed in proficient three-point shooters during the RP. Additionally, the greater elbow and release angles separated made from missed three-point shots within the proficient group of shooters. In response to an increase in shooting distance, hip, knee, ankle, and shoulder angles during the PP all decreased. Moreover, an increase in shooting distance caused a decrease in release angle and an increase in vertical displacement during the RP, while the relative release height remained unchanged. [ABSTRACT FROM AUTHOR]

The purpose of this study was to examine acute changes in salivary testosterone (T), cortisol (C), and testosterone-to-cortisol ratio (T/C) during a simulated 5-on-5 basketball game. Seven professional male basketball players volunteered to participate in this study. Repeated-measures analysis design was used to examine changes in hormonal concentrations across 8 testing time points: immediately upon arrival to the gymnasium- baseline (BS); post-warm-up (PW); post-first (P1Q), second (P2Q), third (P3Q), and fourth quarter (P4Q); and 30 (P30) and 60 minutes (P60) postgame. The findings of this study indicate that a simulated 5-on-5 basketball game provoked significant changes in salivary T, C, and T/C. When compared to the BS levels (... ± SD [nmol⋅L-1]; 6.72 ± 2.53), salivary C concentration experienced a notable increase P3Q (16.20 ± 7.70) and remained elevated throughout the rest of the sampling periods, with values failing to return to BS levels P60 (11.88 ± 5.58). Conversely, a significant increase in salivary T occurred P1Q (0.76 ± 0.21) when compared to the BS levels (0.58 ± 0.12) and remained elevated up to P30 (0.75 ± 0.20), with values returning to BS levels P60 (0.63 ± 0.14). In addition, despite no significant intragame alterations, T/C exhibited a notable decrease P30 (0.06 ± 0.02) and P60 (0.07 ± 0.04), when compared to BS values (0.10 ± 0.04). Overall, these findings provide additional insight into the physiological stress that basketball players are exposed to during 5-on-5 competitive play and can be used to appropriately adjust and monitor training loads to optimize recovery and on-court basketball performance. [ABSTRACT FROM AUTHOR]

The primary aim of the present study was to investigate how the fatigue induced through a repeat sprint protocol acutely affected different measures of neuromuscular performance. Recreationally trained basketball players (n = 25) volunteered to participate in the study, and performed three countermovement jumps (CMJ), as well as three drop jumps (DJ) prior to a fatiguing repeat sprint protocol. These procedures were repeated two minutes, and 15 minutes, following the protocol. Various force-time metrics were extracted from the jump tasks, and linear mixed models with subject ID as the random factor, and time as the fixed factor were used to investigate changes across the three time points. To account for the performance during the repeat sprint protocol, a second, two factor model was performed with time and repeat sprint ability (RSA) as the fixed factors. Study results indicated that the sample as a whole merely experienced fatigue-induced decreases in jump height from pre-repeat sprint ability protocol (pre-RSA) within the CMJ compared to two minutes post-repeat sprint ability protocol (post-RSA1) and 15 minutes post-repeat sprint ability protocol (post-RSA2), while jump height within the DJ was only significantly different from pre-RSA at post-RSA1. Further, despite the implementation of the fatiguing RSA protocol, over the course of the three time-points, participants seemed to perform the two jump tasks more efficiently, seen through significantly lower contraction times, greater eccentric (ECC) peak power, and greater ECC mean deceleration force within the CMJ following the RSA task. The two-factor model revealed that several significant time*RSA interactions were found for metrics such as ECC peak velocity and peak power in the CMJ, as well as reactive strength index in the DJ. This suggests that the level of RSA influenced changes across CMJ and DJ characteristics and should be accounted for when interpreting fatigue-induced changes in neuromuscular performance. [ABSTRACT FROM AUTHOR]

Team sports require athletes to rapidly reduce whole body momentum and velocity, to efficiently change direction, or to avoid defenders. Decelerations often occur following varying approach distances and velocities. The aim of this study was to investigate the effects of different sprinting approach distances, and therefore velocities and momenta on measures of horizontal deceleration performance within female NCAA Division I softball players. Athletes performed an acceleration:deceleration assessment (ADA) over 20 yards (18.29 m) (ADA20) and 10 yards (9.14 m) (ADA10), respectively. The sample was divided into high and low performance groups for approach velocity and approach momentum, and between-group differences were studied for each test. Correlations between measures of deceleration were analysed between the ADA10 and ADA20. Results suggested that during the ADA20 trials, athletes initiated the deceleration phase at greater approach velocities (p < .001, ES = 2.71) and momenta (p < .001, ES = 2.65), generating greater reductions in velocity (p < .001, ES = 1.60) and momentum (p < .001, ES = 1.50). Within the ADA10, athletes within the high velocity group saw significantly greater reductions in velocity (p = .009, ES = 1.24). This was not observed within the ADA20. A significant negative association was found between average deceleration within the ADA10 and ADA20 (r = -0.443, p = .039). Findings suggest that horizontal decelerations are influenced by the approach distance, velocity, and momentum, which athletes are exposed to before initiating the deceleration phase. This should be accounted for when implementing training to enhance such qualities. [ABSTRACT FROM AUTHOR]

The purpose of the present study was to assess pre-post practice changes in countermovement vertical jump (CVJ) force-time metrics and to determine the relationship between internal and external load variables within a cohort of professional male volleyball players. Ten elite athletes competing in one of the top professional European leagues participated in the present study. While standing on a uni-axial force plate, each athlete performed three CVJs immediately prior to the regular training session. Each athlete wore an inertial measurement unit (VertTM) through an entire practice from which the following external load metrics were obtained: Stress (i.e., an algorithm-derived metric used to quantify the percentage of high-impact movements), Jumps (i.e., the total number of jumps performed during the practice session), and Active Minutes (i.e., the total amount of time performing dynamic movements). Immediately post-practice, each athlete completed another set of three CVJs and reported their subjective measure of internal load using a Rating of Perceived Exertion (RPE) scale (Borg CR-10). While no statistically significant differences were observed in any of the force-time metrics examined in the present study pre-post practice (e.g., eccentric and concentric peak and mean force and power, vertical jump height, contraction time, countermovement depth), our findings indicate a strong positive association between RPE and Stress (r = 0.713) and RPE and Jumps (r = 0.671). However, a weak non-statistically significant correlation was observed between RPE and Active Minutes (r = −0.038), indicating that internal load seems to be more dependent on the intensity rather than the duration of the training session for this sport. [ABSTRACT FROM AUTHOR]

With advancements in technology able to quantify wide-ranging features of human movement, the aim of the present study was to investigate the inter-device technological reliability of a three-dimensional markerless motion capture system (3D-MCS), quantifying different movement tasks. A total of 20 healthy individuals performed a test battery consisting of 29 different movements, from which 214 different metrics were derived. Two 3D-MCS located in close proximity were utilized to quantify movement characteristics. Independent sample t-tests with selected reliability statistics (i.e., intraclass correlation coefficient (ICC), effect sizes, and mean absolute differences) were used to evaluate the agreement between the two systems. The study results suggested that 95.7% of all metrics analyzed revealed negligible or small between-device effect sizes. Further, 91.6% of all metrics analyzed showed moderate or better agreement when looking at the ICC values, while 32.2% of all metrics showed excellent agreement. For metrics measuring joint angles (198 metrics), the mean difference between systems was 2.9 degrees, while for metrics investigating distance measures (16 metrics; e.g., center of mass depth), the mean difference between systems was 0.62 cm. Caution is advised when trying to generalize the study findings beyond the specific technology and software used in this investigation. Given the technological reliability reported in this study, as well as the logistical and time-related limitations associated with marker-based motion capture systems, it may be suggested that 3D-MCS present practitioners with an opportunity to reliably and efficiently measure the movement characteristics of patients and athletes. This has implications for monitoring the health/performance of a broad range of populations. [ABSTRACT FROM AUTHOR]

Three-dimensional force plates are important tools for biomechanics discovery and sports performance practice. However, currently, available 3D force plates lack portability and are often cost-prohibitive. To address this, a recently discovered 3D force sensor technology was used in the fabrication of a prototype force plate. Thirteen participants performed bodyweight and weighted lunges and squats on the prototype force plate and a standard 3D force plate positioned in series to compare forces measured by both force plates and validate the technology. For the lunges, there was excellent agreement between the experimental force plate and the standard force plate in the X-, Y-, and Z-axes (r = 0.950–0.999, p < 0.001). For the squats, there was excellent agreement between the force plates in the Z-axis (r = 0.996, p < 0.001). Across axes and movements, root mean square error (RMSE) ranged from 1.17% to 5.36% between force plates. Although the current prototype force plate is limited in sampling rate, the low RMSEs and extremely high agreement in peak forces provide confidence the novel force sensors have utility in constructing cost-effective and versatile use-case 3D force plates. [ABSTRACT FROM AUTHOR]

Sontag, SA, Cabarkapa, D, and Fry, AC. Testosterone and cortisol salivary samples are stable across multiple freeze-thaw cycles. J Strength Cond Res 37(4): 915–918, 2023—When processing salivary samples for biomarker analysis, avoiding multiple freeze-thaw cycles is generally recommended. However, confusing tissue handling instructions or challenges with collections in the field sometimes makes this problematic. Thus, the purpose of this study was to examine if the stability of salivary testosterone (T) and cortisol (C) hormones remains unchanged when exposed to multiple freeze-thaw cycles. Seven healthy recreationally active adults provided salivary samples at rest (i.e., 1600 hours) for analysis of T and C. Samples were separated into 4 aliquots for each hormone and underwent 4 freeze-thaw cycles (T1–T4 and C1–C4) before being analyzed by enzyme-linked immunosorbent assay. The overall analysis of variance model was significant for T (p = 0.008) and nonsignificant for C (p = 0.820). A follow-up post hoc comparison indicated significant differences in salivary hormonal concentrations between T1 and T4 (p = 0.029), T2 and T4 (p = 0.007), and T3 and T4 (p = 0.032). The findings of this study indicate that salivary steroid hormones seem to be relatively stable following multiple freeze-thaw cycles. However, C seems to be more stable when exposed to multiple freeze-thaw cycles, as T concentrations did reveal a significant decrease by the fourth thaw cycle. [ABSTRACT FROM AUTHOR]

The purpose of the present study was to examine the differences in game-related statistics between home and away games at the NCAA Division-I level of men's basketball competition. The data scraping technique was used to obtain publicly available box scores during the 2018-19 competitive season. Throughout this period, 2181 home and 2205 away box scores were randomly selected across 353 teams, regardless of the winning or losing game outcome. The findings of the present study revealed that the game-related statistics influenced by the game location, listed in descending order of magnitude, were: assists (AS), personal fouls (PF), field-goal percentage (FG%), free-throw attempts (FTA), blocks (BL), defensive rebounds (DRB), turnovers (TO), steals (ST), and three-point shooting percentage (3P%). During home games, the teams tended to display better decision-making processes (i.e., more AS and ST, and less TO), defensive performance (i.e., more DRB and BL), shooting efficiency (i.e., greater FT% and 3P%), and minimize tactical errors (i.e., less PF and more FTA). Overall, these findings suggest that playing on a home-court provides a significant advantage in securing the desired game outcome and provides insight into what game-related statistics contribute most to this effect. [ABSTRACT FROM AUTHOR]

With rapid technological development over recent years, the use of wearable athlete monitoring devices has substantially gained popularity. Thus, the purpose of the present study was to examine the impact of the anatomical placement of an accelerometer on biomechanical characteristics of countermovement vertical jump with and without an arm swing when compared to the force plate as a criterion measure. Seventeen recreationally active individuals (ten males and seven females) volunteered to participate in the present study. Four identical accelerometers sampling at 100 Hz were placed at the following anatomical locations: upper-back (UB), chest (CH), abdomen (AB), and hip (HP). While standing on a uni-axial force plate system sampling at 1000 Hz, each participant completed three non-sequential maximal countermovement vertical jumps with and without an arm swing. All devices recorded the data simultaneously. The following variables of interest were obtained from ground reaction force curves: peak concentric force (PCF), peak landing force (PLF), and vertical jump height (VJH). The findings of the present study reveal that the most appropriate anatomical locations to place the accelerometer device when attempting to estimate PCF, PLF, and VJH during a countermovement vertical jump with no arm swing are CH, AB, and UB, and during a countermovement vertical jump with an arm swing are UB, HP, and UB, respectively. Overall, these findings may help strength and conditioning professionals and sports scientists to select appropriate anatomical locations when using innovative accelerometer technology to monitor vertical jump performance characteristics. [ABSTRACT FROM AUTHOR]

Problem Statement: In the United States, collegiate diving coaches look at two main types of competitions to recruit divers: state high school leagues and club leagues such as USA Diving or the Amateur Athletic Union. It is generally perceived that the judging between these two types of competition is not consistent, but few studies have been conducted to quantify these potential inconsistencies and analyze whether these are individual or systemic biases. Purpose: By comparing equivalent dives from the same diver in both a high school and club diving meet, this study sought to identify judging differences and develop a method for correcting scores between high school and club competitions. Approach: Using all applicable scores across a five-year timespan (2016-2021), including factors such as gender and type of dive, investigators analyzed one-meter springboard diving scores to ascertain if scoring discrepancies exist between club and high school diving competitions. Results: The results revealed statistically significant differences between club and high school net scores for each dive type (all p<0.001), and medium-to-large effect sizes were found for all sub-groups, ranging from 0.577-0.753, except for female reverse dives, which displayed large ES of 0.808. Subsequently, researchers identified correction values to more accurately compare scores between high school and club competitions. Conclusions: Statistical analysis demonstrates significant differences in scoring between club and high school diving scores for all dives and sub-groupings of dives and divers, thus warranting a method for remediating these differences. The corrections developed may provide an initial step towards objectifying scoring within a subjectively scored sport, as well as improving collegiate diving recruitment. [ABSTRACT FROM AUTHOR]

Despite exponential growth in popularity over the last decade and recently becoming an Olympic sport, the amount of scientific literature focused on depicting a profile of successful 3×3 basketball players is sparse. Thus, the purpose of this study was to present the physical and performance characteristics of professional 3×3 male basketball players and how they differ between elite and non-elite athletes. The anthropometrics, vertical jump, agility, and sprint performance parameters collected from ten players during regular training sessions were ( x ¯ ± SD): height (193.7 ± 4.5 cm), weight (89.2 ± 4.1 cm), wingspan (196.5 ± 5.2 cm), squat jump (43.5 ± 4.6 cm), countermovement jump with (53.3 ± 4.4 cm) and without an arm swing (46.3 ± 4.0 cm), reactive strength index (2.4 ± 0.3 m/s), t-test (10.3 ± 0.3 s), 505 drill (2.4 ± 0.2 s), 10 m sprint (1.5 ± 0.1 s), 30 m sprint (4.0 ± 0.3 s), shuttle run (27.7 ± 1.7 s), and bench press (98.2 ± 10.0 kg) and back squat (139.5 ± 17.6 kg) one repetition maximum. Additionally, the average and maximal heart rate (HR) responses during simulated games were 160.6 ± 8.0 and 188.5 ± 6.3 bpm, with players spending 6.3 ± 4.2, 11.4 ± 5.2, 13.9 ± 3.5, 26.4 ± 10.4, and 42.1 ± 10.0% of the total time in HR Zones 1–5, respectively. Interestingly, no statistically significant differences in the aforementioned physical and performance parameters were noted between elite and non-elite players. Overall, the findings of the present study provide coaches, sports scientists, and strength and conditioning practitioners with information that can aid in the athlete selection process, detection of areas for further improvement, and development of training regimens that resemble 3×3 basketball on-court competitive demands. [ABSTRACT FROM AUTHOR]

The purpose of the present study was (i) to explore the reliability of the most commonly used countermovement jump (CMJ) metrics, and (ii) to reduce a large pool of metrics with acceptable levels of reliability via principal component analysis to the significant factors capable of providing distinctive aspects of CMJ performance. Seventy-nine physically active participants (thirty-seven females and forty-two males) performed three maximal CMJs while standing on a force platform. Each participant visited the laboratory on two occasions, separated by 24–48 h. The most reliable variables were performance variables (CV = 4.2–11.1%), followed by kinetic variables (CV = 1.6–93.4%), and finally kinematic variables (CV = 1.9–37.4%). From the 45 CMJ computed metrics, only 24 demonstrated acceptable levels of reliability (CV ≤ 10%). These variables were included in the principal component analysis and loaded a total of four factors, explaining 91% of the CMJ variance: performance component (variables responsible for overall jump performance), eccentric component (variables related to the breaking phase), concentric component (variables related to the upward phase), and jump strategy component (variables influencing the jumping style). Overall, the findings revealed important implications for sports scientists and practitioners regarding the CMJ-derived metrics that should be considered to gain a comprehensive insight into the biomechanical parameters related to CMJ performance. [ABSTRACT FROM AUTHOR]

While being an integral part of both the offensive and defensive segments of the game, the biomechanical parameters of setting motions remain understudied in the scientific literature. Thus, the purpose of the present study was to examine differences in kinetic and kinematic characteristics between: (a) three types of setting motions (i.e., front, middle, back); (b) two types of setting approaches (i.e., stationary, step-in); and (c) proficient (PRO) and non-proficient (N-PRO) volleyball players. Twenty recreationally active females performed five stationary and five step-in setting approaches to Zone 4–2 in a randomized order. Uni-dimensional force plate sampling at 1000 Hz and high-definition camera recording at 30 fps were used to obtain kinetic and kinematic variables of interest. The total number of setting attempts performed by each subject was 30, accounting for a grand total of 600 attempts. PRO setters had less knee flexion, shoulder flexion, and ankle dorsiflexion at the initial concentric phase of the volleyball setting motion when compared to the N-PRO setters. Moreover, significantly greater peak concentric and landing forces, impulse, rate of force development, and vertical jump height were observed for PRO setters compared to N-PRO setters, while no significant differences were found between different setting targets and approaches. [ABSTRACT FROM AUTHOR]

Shooting efficiency is one of the key performance parameters related to securing the desired game outcome at various levels of basketball competition, and it is largely influenced by the biomechanical adjustments incorporated during the preparatory and release phase of the shooting motion. Thus, the purpose of the present study was twofold: (a) to examine the differences in the kinematic characteristics between free-throw, two-point, and three-point shots, and (b) to examine the differences between shooters with excellent (≥80%) and good (<80%) levels of shooting proficiency. A total of 10 professional male basketball players performed 5 free-throw (4.57 m), two-point (5.18 m), and three-point (6.75 m) shots, combining for a total of 150 shots. A high-definition camera recording at 120 fps was used to capture the shooting motion from a sagittal point of view, and video analysis software was used to analyze the kinematic variables of interest. The findings of the present study reveal that the kinematic characteristics during the preparatory phase of the shooting motion remain unchanged between free-throw and two-point shots. Three-point shots required lower elbow positioning, influenced by greater knee and hip flexion when compared to free-throw and two-point shots. The release angle was notably lower for shots attempted beyond the three-point line but remained unchanged between the free-throw and two-point shooting motions. Release height and vertical displacement were significantly greater for two- and three-point shots when compared to free-throw shots, while no difference was observed between the two- and three-point shots. In addition, no significant differences in shooting kinematics were observed between those participants with excellent and good levels of shooting proficiency. [ABSTRACT FROM AUTHOR]

Strength is one of the key physiological performance attributes related to optimal on-court basketball performance. However, there is a lack of scientific literature studying how strength relates to shooting proficiency, as a key basketball skill capable of discriminating winning from losing game outcomes. Thus, the purpose of the present study was to examine the relationship between maximal upper and lower body strength and free-throw, two-point, and three-point shooting accuracy. Ten males and seven females performed bench press and back squat one repetition maximum (1RM) and basketball shooting testing during two laboratory visits. The shooting protocol consisted of five sets of 15 free-throw, two-point, and three-point shots performed in sequential order. Each set was separated by a 30 min rest interval to minimize the influence of fatigue. Each subject attempted 225 shots, combining for a total of 3825 shots. The average free-throw, two-point, and three-point shooting accuracy for men were 74.5 ± 11.9, 68.4 ± 9.9, and 53.3 ± 14.9%, and for women 79.2 ± 11.2, 65.5 ± 8.4, and 51.2 ± 15.3%, respectively. The average bench press and back squat 1RM for men was 88.2 ± 18.6 and 117.0 ± 21.2 kg, and for women, 40.6 ± 7.5 and 66.9 ± 9.9 kg, respectively. The findings of the present study revealed no significant relationships between maximal upper and lower body strength and basketball shooting performance for both male and female participants. Neither bench press nor back squat 1RM was a good predictor of free-throw, two-point, and three-point shooting performance. [ABSTRACT FROM AUTHOR]

While the importance of optimal two-point and three-point jump-shooting performance for securing the desired game outcome on various levels of basketball competition has been well documented, there is a limited amount of scientific literature on what biomechanical adjustments in shooting technique comprise the success of each shooting attempt. Therefore, the purpose of the present study was to examine the difference in kinetic and kinematic characteristics during the preparatory and release phases of the shooting motion between made and missed jump shots. While standing on a force plate, twenty-nine recreationally active males with prior basketball playing experience attempted 10 two-point and 10 three-point jump shots, combining for a total of 580 attempts. Simultaneously, two high-definition cameras were used to capture kinematic characteristics of interest. Higher elbow positioning during the preparatory phase of the shooting motion, relative to the shooter's stature, was shown to be a critical kinematic adjustment that differentiated made from missed two-point jump shots. Alongside identical observations regarding the importance of the elbow placement, keeping the torso in a more erect position during the preparatory phase of the shooting motion, having a greater release angle and vertical jump height at the timepoint of the ball release, and attaining higher maximal trajectory height were critical kinematic adjustments that differentiated made from missed three-point jump shots. [ABSTRACT FROM AUTHOR]

The purpose of the present study was to examine the repeatability of five algorithm-derived motion health screening scores (i.e., readiness, explosiveness, functionality, quality, and dysfunction) obtained from an innovative three-dimensional markerless motion capture system, composed of eight high-definition cameras recording at 60 fps. Thirteen females and six males performed two sets of three motion capture screenings, separated one week apart (six in total). The screenings consisted of 20 body movements performed in sequential order. Each screening within a testing session was separated by a 30 min rest interval to avoid the possible influence of fatigue. A trained research team member, facing the participant and standing outside of the camera capture range, was present to demonstrate each individual movement. The order in which motions were performed was identical across all participants. Repeated measures analysis of variance and intraclass correlation coefficients were used to examine statistically significant differences and measurement agreement across six testing sessions. The findings of the present study revealed no significant differences in algorithm-based motion health screening scores across multiple testing sessions. Moreover, excellent measurement reliability was found for readiness scores (ICC, 95% CI; 0.957, 0.914–0.980), good-to-excellent for functionality (0.905, 0.821–0.959) and explosiveness scores (0.906, 0.822–0.959), and moderate-to-excellent for dysfunction (0.829, 0.675–0.925) and quality scores (0.808, 0.635–0.915). [ABSTRACT FROM AUTHOR]

The purpose of the present study was to examine differences in game-related statistical parameters between National Basketball Association (NBA) regular and post-season competitive periods and to determine which variables have the greatest contribution in discriminating between winning and losing game outcomes. The data scraping technique was used to obtain publicly available NBA game-related statistics over a three-year span (2016–2019). The total number of games examined in the present investigation was 3933 (3690 regular season and 243 post-season games). Despite small to moderate effect sizes, the findings suggest that NBA teams' style of play (i.e., tactical strategies) changes when transitioning from the regular to post-season competitive period. It becomes more conservative (i.e., fewer field goal attempts, assists, steals, turnovers, and points scored), most likely due to greater defensive pressure. Discriminant function analysis correctly classified winning and losing game outcomes during the regular and post-season competitive periods in 82.8% and 87.2% of cases, respectively. Two key game-related statistics capable of discriminating between winning and losing game outcomes were field goal percentage and defensive rebounding, accounting for 13.6% and 14.2% of the total percentage of explained variance during the regular season and 11.5% and 14.7% during post-season competitive periods. Also, overall shooting efficiency (i.e., free-throw, 2-point, and 3-point combined) accounted for 23–26% of the total percentage of explained variance. [ABSTRACT FROM AUTHOR]

The vertical jump has been widely used in a sport setting for the assessment of lower-body power. Recently, accelerometry has gained popularity as an inexpensive testing modality for assessment of vertical jump performance characteristics. However, accelerometer anatomical placement could affect the accuracy of the data collected. The purpose of this study was to examine the impact of accelerometer placement on assessment of vertical jump performance parameters. Seventeen healthy recreationally active subjects performed three nonconsecutive maximal vertical jumps with no arm swing. Subjects were instructed to keep the hands on the hips and reach 90-degrees internal knee flexion during the eccentric phase of the jumping motion. Two identical accelerometers sampling at 100 Hz were positioned on the abdomen (AB; 5 cm inferior to umbilicus) and on the hip (HP; 5 cm above greater trochanter). Both devices were secured with elastic bands and collected data simultaneously. Ground reaction force curves were computed from the raw accelerometry data from which the following variables were derived: peak concentric force (PCF), peak landing force (PLF), vertical jump height (VJH) based on flight time, and impulse (IMP) excluding subject's body weight. No significant differences were found between AB and HP accelerometer placement for PCF, PLF, and IMP. However, despite a small effect size, HP accelerometer placement resulted in a significantly lower VJH by 1.2 cm. Additionally, strong agreement and consistency of the measurements were observed across all dependent variables examined in the present investigation, suggesting that both AB and HP accelerometer placements may seem appropriate for analysis of vertical jump performance. [ABSTRACT FROM AUTHOR]