Search

The surface frustrated Lewis pairs (SFLPs) open up new opportunities for substituting noble metals in the activation and conversion of stable molecules. However, the applications of SFLPs on a larger scale are impeded by the complex construction process, low surface density, and sensitivity to the reaction environment. Herein, wurtzite‐structured crystals such as GaN, ZnO, and AlP are found for developing natural, dense, and stable SFLPs. It is revealed that the SFLPs can naturally exist on the (100) and (110) surfaces of wurtzite‐structured crystals. All the surface cations and anions serve as the Lewis acid and Lewis base in SFLPs, respectively, contributing to the surface density of SFLPs as high as 7.26×1014 cm−2. Ab initio molecular dynamics simulations indicate that the SFLPs can keep stable under high temperatures and the reaction atmospheres of CO and H2O. Moreover, outstanding performance for activating the given small molecules is achieved on these natural SFLPs, which originates from the optimal orbital overlap between SFLPs and small molecules. Overall, these findings not only provide a simple method to obtain dense and stable SFLPs but also unfold the nature of SFLPs toward the facile activation of small molecules. [ABSTRACT FROM AUTHOR]

Direct methane conversion (DMC) to oxygenates at low temperature is of great value but remains challenging due to the high energy barrier for C−H bond activation. Here, we report that in situ decoration of Pd1‐ZSM‐5 single atom catalyst (SAC) by CO molecules significantly promoted the DMC reaction, giving the highest turnover frequency of 207 h−1 ever reported at room temperature and ~100 % oxygenates selectivity with H2O2 as oxidant. Combined characterizations and DFT calculations illustrate that the C‐atom of CO prefers to coordinate with Pd1, which donates electrons to the Pd1−O active center (L−Pd1−O, L=CO) generated by H2O2 oxidation. The correspondingly improved electron density over Pd−O pair renders a favorable heterolytic dissociation of C−H bond with low energy barrier of 0.48 eV. Applying CO decoration strategy to M1‐ZSM‐5 (M=Pd, Rh, Ru, Fe) enables improvement of oxygenates productivity by 3.2–11.3 times, highlighting the generalizability of this method in tuning metal‐oxo electronic structure of SACs for efficient DMC process. [ABSTRACT FROM AUTHOR]

Chemical looping reforming of methane to syngas (CO and H2) is one of the most promising routes for methane utilization, where the further reaction of CO on oxygen carrier surfaces is a primary determinant of CO selectivity. In this work, the effects of oxygen vacancy (Vo) on CO desorption, CO oxidation, and CO dissociation are systematically studied by using density functional theory calculattions. Our calculated results reveal that increasing Vo concentration can weaken CO desorption at Fe sites due to the enhanced localization of electrons in the Fe atoms. Also, the increase in Vo concentration from 1/12 ML to 1/6 ML leads to a dramatic increase of activation energy in the CO oxidation from 0.64 eV to 1.10 eV. Moreover, the increase in Vo concentration is conducive to CO dissociation, but the dissociation is still almost impossible due to the high reaction energies (large than 3.00 eV). Considering these three reaction paths, CO desorption can proceed spontaneously at reaction temperatures above 900 K. Increasing Vo concentration can improve the selectivity of syngas production due to the less favorable CO oxidation compared with CO desorption at high Vo concentrations (1/6 ML). This work reveals the microscopic mechanism that CO selectivity rises in the CLRM as the degree of Fe2O3 reduction increases. [ABSTRACT FROM AUTHOR]

The development of a single-atom iron catalyst (Fe©SiO2) for the direct conversion of methane to olefins, aromatics, and hydrogen is a breakthrough in the field of nonoxidative conversion of methane (NCM). However, the optimization of the catalyst remains desirable for industrial applications. Herein, 25 transition metals, including Sc, Ti, V, Cr, Mn, Co, Ni, Cu, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Hf, Ta, W, Re, Os, Ir, Pt, and Au, are selected to replace the central Fe atom for screening out better single-atom catalysts for the NCM. Using the performance on the activation of methane, such as the adsorption energy of methane, the dissociation energy, and the barrier of methane as the screening descriptors, Mn©SiO2, Fe©SiO2, W©SiO2, and Re©SiO2 are first screened out. The remarkable performance of the four catalysts on methane activation is attributed to the unique geometric structure and the d z 2 orbitals of the central metal crossing over the Fermi level, which can benefit the interaction between methane and the catalysts. By considering the catalytic performance on the whole pathway of methane to ethylene, W©SiO2 is finally selected as the most active catalyst for the NCM, which has the lowest rate-determining barrier of 1.62 eV and the smallest free energy span (1.06 eV) of the overall catalytic cycle. [ABSTRACT FROM AUTHOR]

After stepping into the pandemic, it has been entirely not bizarre to wear facial masks to diminish the spreading of viruses in human daily outings. Due to the low expense and stable protection capability, disposable masks are the most widely used types of medical masks. By functionalities and medical standards, disposable masks mainly consist of surgical masks and N95/KN95 respirators in the market. In the assembling scheme, there are typically three or more polymeric layers (i.e., mainly polypropylene) in disposable masks; in addition, the ear loops in masks are usually made from textile constituents, such as polyamides. Therefore, the vast utilization and rapid accumulation of disposal mask waste can directly bring an emerging crisis of foreseeable environmental pollution. To minimize and prevent such mask-led microplastic pollution, chemical pyrolysis of mask waste is one of the most feasible and promising strategies. Via the direct and selective pyrolysis of disposable masks, it can effectively convert the mask waste into high-value fuel-range chemicals, e.g., liquid hydrocarbon blends, aromatics, C1–5 gas alkanes/alkenes, hydrogen, etc. In this way, it can not only tackle environmental challenges from plastic waste but also afford sustainable fuels with low carbon emission and circular economy. [ABSTRACT FROM AUTHOR]

The alkylation of ketones or secondary alcohols using alcohols as alkylating agents via hydrogen borrowing strategy presents a powerful method for the synthesis of ɑ‐alkylated ketones. In this review, we summarize the progress catalyzed by Ir, Pd, Rh, Ru, Mn, Fe, Co, Ni, and Cu catalysts for the α‐alkylation of ketones with alcohols and cross‐coupling of secondary alcohols with alcohols from 2017 to 2021. A wide range of ketones (aromatic and aliphatic ketones) and alcohols (benzylic and aliphatic primary alcohols, aromatic and aliphatic secondary alcohols, alkenyl alcohols, and diols) are well tolerated. Furthermore, we also discuss current challenges and propose perspectives on the coming development in this filed. The objective of the present review is to give an overview on recent advances for α‐alkylation of ketones with alcohols and β‐alkylation of secondary alcohols with alcohols. Finally, we hope that this review will give inspirations on alkylation of ketones or secondary alcohols with alcohols. [ABSTRACT FROM AUTHOR]

The one-step conversion of ethanol to 1,3-butadiene has achieved a breakthrough with the development of beta zeolite supported dual metal catalysts. However, the reaction mechanism from ethanol to butadiene is complex and has not yet been fully elucidated, and no catalyst screening effort has been done based on central metal atoms. In this work, density functional theory (DFT) calculations were employed to study the mechanism of one-step conversion of ethanol to butadiene over Zn-Y/BEA catalyst. The results show that ethanol dehydrogenation prefers to proceed on Zn site with a reaction energy of 0.77 eV in the rate-determining step, and the aldol condensation to produce butadiene prefers to proceed on Y site with a reaction energy of 0.69 eV in the rate-determining step. Based on the mechanism revealed, six elements were selected to replace Y for screening superior combination of Zn-M/BEA (M=Sn, Nb, Ta, Hf, Zr, Ti; BEA: beta polymorph A) for this reaction. As a result, Zn-Y/BEA (0.69 eV) is proven to be the most preferring catalyst compared with the other six ones, and Zn-Zr/BEA (0.85 eV), Zn-Ti/BEA (0.87 eV), and Zn-Sn/BEA (0.93 eV) can be potential candidates for the conversion of ethanol to butadiene. This work not only provides mechanistic insights into one-step catalytic conversion of ethanol to butadiene over Zn-Y/BEA catalyst but also offers more promising catalyst candidates for this reaction. [ABSTRACT FROM AUTHOR]

Isotope substitution, a fascinating tool of physical chemistry, has been broadly applied in the research field of heterogeneous catalysis. In general, due to the differences in the mass-related atomic vibrational frequencies and zero-point energy of isotopic molecules, the apparent isotope effect (AIE) or observed kinetic isotope effect (observed KIE) from isotope substitution examination could provide unique knowledge regarding the reaction rate and mechanism of a catalytic reaction, such as the rate-determining step, key reaction intermediate, or catalyst design and synthesis. However, the treatment of the AIE is not as straightforward as the isotopic switch experiment, and needs sufficient care and comprehensive identification to deal with the influences from the equilibrium isotope effects (EIEs) of quasi-equilibrium elementary steps, kinetic isotope effect (KIE) of the pseudo rate-determining step, transition states, intrinsic reaction barriers, etc. Fundamentally, the key factors affecting the AIE could be the partition function part and the zero-point energy part of each single elementary step. Theoretically, the classification of the KIE could be based on the quantity of KIE (including normal KIE and inverse KIE) or the molecular transformation (including primary KIE, secondary KIE, tunneling KIE, and solvent KIE) involved. This article presents a recap of the fundamental concepts and relations of KIE, EIE and AIE, and a concise review on the selected applications of isotope effects throughout heterogeneous catalysis. Lastly, the meaningful perspectives regarding the critical factors that impact the AIE and the appropriate treatment of the AIE are discussed meticulously. [ABSTRACT FROM AUTHOR]

Methane (CH4) oxidation to high value chemicals under mild conditions through photocatalysis is a sustainable and appealing pathway, nevertheless confronting the critical issues regarding both conversion and selectivity. Herein, under visible irradiation (420 nm), the synergy of palladium (Pd) atom cocatalyst and oxygen vacancies (OVs) on In2O3 nanorods enables superior photocatalytic CH4 activation by O2. The optimized catalyst reaches ca. 100 μmol h−1 of C1 oxygenates, with a selectivity of primary products (CH3OH and CH3OOH) up to 82.5%. Mechanism investigation elucidates that such superior photocatalysis is induced by the dedicated function of Pd single atoms and oxygen vacancies on boosting hole and electron transfer, respectively. O2 is proven to be the only oxygen source for CH3OH production, while H2O acts as the promoter for efficient CH4 activation through ·OH production and facilitates product desorption as indicated by DFT modeling. This work thus provides new understandings on simultaneous regulation of both activity and selectivity by the synergy of single atom cocatalysts and oxygen vacancies. CH4 oxidation to high value chemicals under mild conditions through photocatalysis confronts critical issues regarding both conversion and selectivity. Here, atomic Pd and oxygen vacancies were integrated on In2O3 nanorods, leading to visible-driven CH4 conversion with a remarkable yield of oxygenates and high selectivity of primary products. [ABSTRACT FROM AUTHOR]

The direct, nonoxidative conversion of methane on a silica‐confined single‐atom iron catalyst is a landmark discovery in catalysis, but the proposed gas‐phase reaction mechanism is still open to discussion. Here, we report a surface reaction mechanism by computational modeling and simulations. The activation of methane occurs at the single iron site, whereas the dissociated methyl disfavors desorption into gas phase under the reactive conditions. In contrast, the dissociated methyl prefers transferring to adjacent carbon sites of the active center (Fe1©SiC2), followed by C−C coupling and hydrogen transfer to produce the main product (ethylene) via a key −CH−CH2 intermediate. We find a quasi Mars–van Krevelen (quasi‐MvK) surface reaction mechanism involving extracting and refilling the surface carbon atoms for the nonoxidative conversion of methane on Fe1©SiO2 and this surface process is identified to be more plausible than the alternative gas‐phase reaction mechanism. [ABSTRACT FROM AUTHOR]

The electrochemical nitrogen reduction reaction (NRR) is emerging as a promising sustainable technique that can convert nitrogen (N2) to ammonia (NH3) under ambient conditions. However, the selectivity and electrocatalytic activity of the NRR obtained experimentally to date are still unsatisfactory. As a consequence, it remains a technical challenge to develop scalable, low-cost, and efficient NRR electrocatalysts. Herein, we present an oxygen vacancy (VO)-rich two-dimensional gold (Au)/titanium dioxide (TiO2) hybrid that acts as an advanced NRR electrocatalyst under ambient conditions. Electrocatalytic testing demonstrated that the Au/TiO2 hybrid catalyst delivered a promising NH3 yield of 64.6 μg h−1 mg−1 cat and a high faradaic efficiency of 29.5% at −0.40 V versus the reversible hydrogen electrode in acidic media. Experimental findings and theoretical calculations demonstrate that the strong electron-donating effect of VO in TiO2 was essential for N2 activation. Meanwhile, the introduction of Au promotes both the electrochemical and thermodynamic rate-limiting steps by adjusting the electronic structure of the active sites. Together, these effects greatly facilitate the activation and reduction of N2 under ambient conditions. The specific catalyst design strategy in our work represents an alternative avenue to produce other two-dimensional electrocatalysts with high NRR activity and selectivity through rational structural engineering. [ABSTRACT FROM AUTHOR]

Recently discovered homogeneous frustrated Lewis pairs (FLPs) have attracted much attention for metal-free catalysis due to their promising potential for the activation of small molecules (e.g., H2, CO, CO2, NOx and many others). Hence, a wide range of these homogeneous FLPs have been extensively explored for many advanced organic syntheses, radical chemistry and polymerizations. In particular, these FLPs are efficiently utilized for the hydrogenation of various unsaturated substrates (e.g., olefins, alkynes, esters and ketones). Inspired by the substantial progress in these homogeneous catalytic systems, heterogeneous FLP catalysts, including semi-solid and all-solid catalysts, have also emerged as an exciting and evolving field. In this review, we highlight the recent advances made in heterogeneous FLP-like catalysts and the strategies to construct tailorable interfacial FLP-like active sites on semi-solid and all-solid FLP catalysts. Challenges and outlook for the further development of these catalysts in synthetic chemistry will be discussed. [ABSTRACT FROM AUTHOR]