Search

Transition metal oxides (TMOs) have excellent electrochemical properties. However, they are commonly associated with short cycle lives, agglomeration, and lower electrical conductivity. To ameliorate these drawbacks, porous rod-shaped CuO@Co3O4 has been synthesized through calcination with optimized oxidation temperature by using CuCo-MOF-74 as a template. Due to the porous structure, the CuO@Co3O4 electrode significantly increases the contact area with the electrolyte and greatly improves the reaction kinetics. As a result, the CuO@Co3O4 electrode exhibits excellent electrochemical performance with a specific capacitance of 545.5 F g−1 at a current density of 1 A g−1. The capacitance retention at 10 A g−1 was 88.7% after 10 000 cycles. Furthermore, an asymmetric supercapacitor (SC) has been assembled with CuO@Co3O4 as the positive electrode and commercial reduced graphene oxide (RGO) as the negative electrode, and the device has exhibited an energy density of 38.2 W h kg−1 at a power density of 1268.3 W kg−1. Impressively, the capacitance retention remained 83.2% even after 10 000 cycles at a high current density of 10 A g−1. This performance has demonstrated the potential of CuO@Co3O4 as an anode material for SCs. [ABSTRACT FROM AUTHOR]

In order to study the failure mechanism of high-voltage cable buffer layer caused by moisture and the performance of the material after immersion and drying, according to the structure and size of 110 kV XLPE cable, the requirements for the separation distance between corrugated aluminum sheath and insulating outer shield before and after the change of buffer layer resistivity caused by moisture were calculated, the influence of moisture on ablation failure was analyzed. The test platform of buffer layer material was built, the properties of two kinds of materials without water immersion and after water immersion drying were tested, including semi-conductive buffer water-blocking tape and semi-conductive buffer tape. The results show that when the moisture content was large, the resistivity of the buffer layer increases, which reduces the requirements of the allowable separation distance of the cable, and was more likely to cause the discharge and ablation of the buffer layer. The water in the buffer layer was removed by drying at 70 °C, with thickness, weight, the water content, elongation at break, breaking strength and volume resistivity can be recovered, which verifies that the heating drying method is feasible for the removal of water from the buffer layer.

CitST is a typical two-component regulatory system that can regulate citrate utilization and is involved in the regulation of carbohydrate metabolism in Bacillus subtilis. B. subtilis is a kind of dominant species to bio-degum ramie fibers, which could degrade and utilize non-cellulose components as a carbon source during bio-degumming. This study aimed to explore the regulatory function of response regulator CitT from CitST two-component system when B. subtilis was used for extracting ramie fibers. The results showed that gene knocked-out of citT could significantly decrease the bio-degumming ability of B. subtilis. The enzymatic activity mensuration of functional enzymes revealed that deficient in CitT would remarkably reduce the enzymatic activity of pectinase, but there was a little difference in transcriptional levels of their encoding genes with qRT-PCR analysis, which further demonstrated that it was a lack of correlation between mRNA expression and enzymatic activities. The data also reflected that CitT specifically regulated the pectin degradation in bio-degumming of ramie fibers by analyzing the polysaccharide degradation rates of gum components. In conclusion, it was shown for the first time that CitT probably positively regulated the bio-degumming of ramie fibers and was an important regulator in pectin degradation. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In order to obtain a thermostable pectate lyase for ramie degumming, a rational design based on structural analysis was carried out on a novel pectate lyase (Pel419) derived from the Dickeya Dadantii DCE-01 for high-efficiency ramie degumming. A total of five potential amino acid sites were chosen to replace residues. Then, the mutant enzymes were subjected to the heterologous expressions in Escherichia coli and their enzymatic characteristics were determined. The optimal reaction temperature for the five mutants kept consistent with that for the wild type. The enzyme activity and thermal stability of mutant V52A were significantly improved. Meanwhile, the weight loss rate obtained by V52A with the best enzymatic characteristics in the ramie degumming process at 50 °C is comparable with that obtained by commercial cotton-ramie processing pectinases, indicating that V52A was a potential industrial enzyme that could be applied to large-scale ramie degumming. In this study, the biological functions of conservative residues of Pel419 were preliminarily explored. The mutant V52A with both enzymatic activity and improved heat resistance was acquired, providing a superior material for developing enzyme preparations of ramie degumming, and rendering an effective method for the rational design aiming to improve the thermostability of pectate lyase. [ABSTRACT FROM AUTHOR]

Microbial treatment of natural fibers is a preferred alternatives in ramie degumming process as compared to conventional chemical degumming technology with alkaline treatment at high temperature. Usually, it is difficult to degrade the noncellulosic components of ramie bast completely with a single strain in the mono-culturing degumming system. Microbial coculture strategy has been widely used in biotechnology, especially in the degradation of biological materials. In the present study, five strains for ramie degumming were identified as Dickeya dadantii strain DCE-01, Bacillus subtilis strain 1101, Bacillus sp. B6, Bacillus cereus strain B7, and Bacillus cereus strain B8 by sequencing of 16 S rRNA genes. Enzymatic activities characterization, ramie degumming experiments with mono-culturing systems, and the evaluation of strain compatibility showed that group DCE-01/B7 were the most suitable pairs for the construction of bacterial coculturing system. After preliminary optimization of coculturing fermentation condition, the weight loss weight ratio of ramie fibers was 27%, which was increased 13.6% and 8.9% while compared to mono-culturing systems of strain B7 and DCE-01 respectively. These data highlighted the benefit of microbial coculture strategy in the application of ramie degumming process, and indicated a higher-efficiency alternative for the microbial degumming in the textile industry. [ABSTRACT FROM AUTHOR]

Atypical meningioma is a specific type of meningioma that is relatively rare in clinical practice. The clinical manifestations of atypical meningioma are non-specific and the imaging findings are similar to those for other intraspinal space-occupying lesions. It is usually misdiagnosed as schwannoma or metastases, and it is necessary to rely on intraoperative findings and pathological examination to confirm the diagnosis. Atypical meningioma invading the intervertebral foramen and causing bone destruction is rare. The present study describes the case of a patient with cervical intraspinal atypical meningioma combined with cervical bone destruction. A 50-year-old female patient presented with numbness of the extremities with unstable walking, and underwent magnetic resonance imaging (MRI) of the cervical spine. MRI showed a space-occupying lesion in the spinal canal at the C2-4 level. The patient underwent cervical intraspinal lesion resection, and postoperative pathology confirmed atypical meningioma (World Health Organization grade II). The patient received dehydration and hormone therapy, and was discharged after the symptoms improved. Radiotherapy was performed 2 months after discharge. Cervical MRI 3 months after the operation showed that the tumor resection was satisfactory. To the best of our knowledge, the present study is the first to report on this specific type of meningioma. The present case report may provide useful information for clinicians to diagnose and treat the disease. [ABSTRACT FROM AUTHOR]

Degumming is the most important step before kenaf bast fibers used in textile industry. Microbial degumming is an environmental protection and energy-saving technology to replace the conventional chemical degumming. Higher efficiency strains are the essential prerequisite to promote the application of microbial degumming technology. Generally, the screening and evaluation of strains for kenaf bast degumming were based on activity of functional enzymes produced by microorganism. In order to investigate the relationship between enzymatic activity and effect of kenaf bast degumming, strains DCE-01, 1101, B6, B7, and B8 were incubated in pure cultured, sterilized and non-sterilized degumming systems. After culturing for 16 h, functional enzymes for kenaf bast degumming (such as pectinase, neutral protease, xylanase, β-mannanase, laccase, lignin peroxidase and manganese peroxidase) were detected in the supernatant, and degumming effect of kenaf bast under sterilized and non-sterilized systems were evaluated respectively. Results revealed that strain DCE-01 was the best for kenaf bast degumming, though its enzymatic activity was not the highest among five strains. And the pretreatment of kenaf bast by high-pressure-steam sterilization could promote the degumming effect. This study suggested that there were limitations when screening or evaluating high-efficient strains for kenaf bast degumming with the guidance of enzymatic activity. [ABSTRACT FROM AUTHOR]

To explore high-quality microbial resources with the capability of ramie degumming, we collected soil samples from rotten ramie and straw heaps. After enrichment culture by ramie raw materials, bacterial strains with the potential ramie-degumming function were screened using a pectin-hydrolysis plate. Dominant bacteria were identified by combining colonial morphological characteristics with the molecular biology method, and their ramie-degumming effects were verified through comprehensive biological degumming indices. Results demonstrated that Bacillus aryabhattai, Bacillus thuringiensis, Lysinibacillus fusiformis, and Acidovorax temperans were successfully obtained. The highest pectinase activity, 98.2 U/mg, was found by A. temperans. B. thuringiensis showed the best ramie-degumming effect. The residual gum content, single-fiber linear density, and bundle-breaking strength of the degummed ramie fiber treated with B. thuringiensis were 8.32%, 6.80 dtex, and 7.84 cN/dtex, respectively. The residual gum content of the ramie fiber treated with B. thuringiensis met the textile requirement (<10%), and the values of all other indicators were also satisfactory. Therefore, B. thuringiensis was an excellent strain for ramie degumming, indicating potential industrial applications. [ABSTRACT FROM AUTHOR]

Ramie (Boehmeria nivea L.), a perennial herb, is an important bast fiber plant. Its fiber with the advantages of attractive luster, high tenacity, enhanced strength, and good microbial resistivity is well known as the queen of natural fibers. The abundant cellulose fibers in ramie raw materials are stuck tightly by gums consisting of pectic substances, hemicelluloses, and little lignin. The gum should remove from the ramie raw material through degumming process to separate fibers, unveil unique fiber properties, and improve fiber-spinning ability to fulfill textile requirements. Low degumming efficiency and high environmental pollution are the major problems hindering the utilization of ramie fibers. Ramie degumming involves the degradation of pectin and hemicelluloses, which requires chemical, physical, biological treatment, or a combination of several treatments. No stereotyped parameters of the given degumming method have been yet established for the extraction of textile-grade ramie fibers. This review evaluated integrated methodology involving chemical, physical, biological and biochemical methods to degum raw ramie and obtain textile-grade refined fibers. [ABSTRACT FROM AUTHOR]

Due to their high transmission ratio, high load carrying capacity and small size, planetary gears are widely used in the transmission systems of wind turbines. The planetary gearbox is the core of the transmission system of a wind turbine, but because of its special structure and complex internal and external excitation, the vibration signal spectrum shows strong nonlinearity, asymmetry and time variation, which brings great trouble to planetary gear fault diagnosis. The traditional time-frequency analysis technology is insufficient in the condition monitoring and fault diagnosis of wind turbines. For this reason, we propose a new method of planetary gearbox fault diagnosis based on Compressive sensing, Two-dimensional variational mode decomposition (2D-VMD) and full-vector spectrum technology. Firstly, the nonlinear reconstruction and noise reduction of the signal is carried out by using compressed sensing, and then the signal with multiple degrees of freedom is adaptively decomposed into multiple sets of characteristic scale components by using 2D-VMD. Then, Rényi entropy is used as the optimization index of 2D-VMD analysis performance to extract the effective target intrinsic mode function (IMF) component, reconstruct the dynamics signal in the planetary gearbox, and improve the signal-to-noise ratio. Then, using the full-vector spectrum technique, the homologous information collected by numerous sensors is data layer fused in the spatial domain and the time domain to increase the comprehensiveness and certainty of the fault information. Finally, the Teager–Kaiser energy operator is used to demodulate the potential low-frequency dynamics frequency characteristics from the high-frequency domain and detect the fault characteristic frequency. Furthermore, the correctness and validity of the method are verified by the fault test signal of the planetary gearbox. [ABSTRACT FROM AUTHOR]

Pectinase plays a crucial role in ramie bio-degumming. A pectate lyase gene (pel 4J4) from the high-efficiency degumming bacteria Dickeya dadantii DCE-01 of bast fibers was cloned and connected to pET28a, and then the recombinant plasmid was successfully transformed into Escherichia coli BL21(DE3). The pectate lyase (Pel4J4) induced was purified by ultrafiltration and Sephadex G-100 gel chromatography. The enzymatic properties of Pel4J4 were studied in detail. pel 4J4 (GenBank accession number: KC900167) had a sequence length of 1179 bp, encoding 392 amino acids. The extracellular pectate lyase activity of pET28a- pel -BL was up to 204.4 IU/mL. The optimal temperature and pH of the purified Pel4J4 were 55℃ and 8.5, respectively. The stable temperature and pH of Pel4J4 activity were 45℃ and 8.5–10.0, respectively. The catalytic activity is Ca2+ dependent and promoted by 1 mmol/L Zn2+, Fe3+, Ca2+, and NH4+, but seriously inhibited by Cu2+ and Pb2+. The optimal substrate is citrus pectin with more than 85% esterification. The heat-resistant alkaline Pel4J4 could strongly degrade natural ramie pectin, indicating a promising application prospect in ramie bio-degumming. [ABSTRACT FROM AUTHOR]

Xylanase plays an important role in the hydrolysis of hemicellulose and has gained much attention in the field of biological degumming. The research for xylanases with cellulase-free and high activity for biological degumming has intensified in recent years. In the present research, heterologous expression of a novel endo-β-1,4-xylanase (GH30) from Dickeya dadantii DCE-01 in Escherichia coli BL21 (DE3) was reported. Biochemical characterization of the enzyme and a potential application in ramie biological degumming was discussed. The results showed that the xylanase gene consists of 1251 nucleotides, belonging to glycoside hydrolase family 30 (GH30). The optimal activity of the xylanase was observed at 50℃ and a pH value of 6.4. The Km and Vmax values for beechwood xylan were 14.25 mg/mL and 296.6 μmol/mg, respectively. The catalytic activity was enhanced by addition of 1 mM Cu2+, Ca2+, Mg2+, and K+. The recombinant enzyme was specific for xylan substrates. The enzyme exhibited hydrolytic activity toward ramie hemicellulose. The recombinant xylanase could be effectively applied to ramie degumming. [ABSTRACT FROM AUTHOR]

Kenaf is one of the most important natural fiber crops. Traditional degumming with water retting causes serious environmental pollution and reduces the quality of fiber products. The development of kenaf industry is hindered by high production cost. Microbial degumming is suitable for kenaf bast degumming because of its high efficiency, energy conservation, low pollution, and high quality, among others. Through enrichment and screening from water sample, soil sample, and humus sample, we concentrated and identified 92 bacterial strains that could degrade kenaf bast colloid. The strains belonged to 11 genera and 16 species. Five of these strains did not produce cellulase and the weight loss rate of the kenaf bast fiber raw material was more than 20%. These strains belonged to Bacillus subtilis, Paenibacillus polymyxa, Clostridium acetobutylicum, Bacillus alcalophilus, and Erwinia chrysanthemi and were assigned with serial numbers from K1-K5, respectively. This study is the first to report the function of Bacillus pumilus, B. alcalophilus, Clostridium tertium, Brevibacillus brevis, Pectobacterium carotovora, E. chrysanthemi, and Tyromyces subcaesius in kenaf bast degumming. Pectinase and mannanase were the key enzymes in the degumming of kenaf bast. [ABSTRACT FROM AUTHOR]

Apocynum venetum fiber is known as the “king of wild fibers”. The traditional chemical degumming method for A. venetum limits the development of the industry due to serious pollution and fiber damage. By machine rolling preprocessing, bacteria culture, soaking fermentation, inactivation, water scrubbing, and drying under fermentation conditions of bath ratio 1:15, inoculum size 2%, temperature 33℃, and fermentation time 16 h, A. venetum fiber could be extracted from A. venetum bast. Strain Pectobacterium sp. DCE-01 simultaneously secreted pectinase, mannanase, and xylanase, which can decompose the main components of A. venetum non-cellulose. The catalytic activities of pectase, mannanase, xylanase, and cellulase at 16 h were 12.47, 7.56, 6.02, and 2.82 U/ml respectively. Compared with chemical degumming, bio-degumming exhibited 22.56% higher residual gum content, 18.14% higher breaking strength, and 44.33% lower chemical oxygen demand. [ABSTRACT FROM AUTHOR]

The blade aerodynamic asymmetry fault must be detected early due to its important effect on wind turbines. This paper develops a fault diagnosis approach based on the current and power characteristics of a Doubly fed induction generator (DFIG). First, the blade aerodynamic characteristics and the influence on the nacelle and tower vibration under an aerodynamic asymmetry fault are analysed and an improved Blade element moment (BEM) method considering the blade, nacelle and tower vibration is proposed to calculate the aerodynamic torque. Then, the electrical characteristics of the DFIG are analysed. The output power is shown to decrease with oscillation when aerodynamic asymmetry occurs. In addition, the same modulation harmonic frequency as the blade rotating frequency exists in the stator and the rotor current. Finally, simulations under constant and stochastic wind conditions via MATLAB/Simulink show the effectiveness of the proposed method in this paper. [ABSTRACT FROM AUTHOR]

β-mannanase has shown compelling biological functions because of its regulatory roles in metabolism, inflammation, and oxidation. This study separated and purified the β-mannanase from Bacillus subtilis BE-91, which is a powerful hemicellulose-degrading bacterium using a “two-step” method comprising ultrafiltration and gel chromatography. The purified β-mannanase (about 28.2 kDa) showed high specific activity (79, 859.2 IU/mg). The optimum temperature and pH were 65°C and 6.0, respectively. Moreover, the enzyme was highly stable at temperatures up to 70°C and pH 4.5–7.0. The β-mannanase activity was significantly enhanced in the presence of Mn2+, Cu2+, Zn2+, Ca2+, Mg2+, and Al3+ and strongly inhibited by Ba2+ and Pb2+. Km and Vmax values for locust bean gum were 7.14 mg/mL and 107.5 μmol/min/mL versus 1.749 mg/mL and 33.45 µmol/min/mL for Konjac glucomannan, respectively. Therefore, β-mannanase purified by this work shows stability at high temperatures and in weakly acidic or neutral environments. Based on such data, the β-mannanase will have potential applications as a dietary supplement in treatment of inflammatory processes. [ABSTRACT FROM AUTHOR]

Abstract: LiFePO4/C composite materials have been synthesized from a low cost Fe2O3 precursor by a hydrothermal method to make LiFePO4(OH) in a first step followed by a fast calcination and carbon coating. This method combines the advantages of both hydrothermal and solid state synthetic methods. The as-prepared LiFePO4/C provides enhanced discharge capacity and cycling stability compared to LiFePO4 synthesized using a solid state method with the same precursors. Thus, the method to be described herein is a promising option in the search to reduce the cost of large-scale synthesis of LiFePO4/C for use in lithium-ion batteries, while maintaining adequate electrochemical performance. [Copyright &y& Elsevier]

To improve the thermal stability of pectate lyase for ramie degumming, we modified the novel pectate lyase gene (pelG403) derived from the Dickeya dadantii DCE-01 high-efficiency ramie degumming strain by site-directed mutagenesis. Twelve mutants were acquired, wherein a prospective mutant (A129V) showed better enzyme activity and thermal stability. Compared with the wild type (PelG403), the specific enzyme activity and the optimal reaction temperature of A129V in the fermentation broth increased by 20.1%, and 5 °C, respectively. Under the conditions of 55 °C and pH 9.0, the weightlessness rate of ramie raw materials of A129V increased by 6.26%. Therefore, this study successfully improved the enzyme activity and heat resistance of PelG403 in an alkaline environment, which may contribute to the development of enzyme preparations and the elucidation of the mechanism for ramie bio-degumming. [ABSTRACT FROM AUTHOR]

Xylanases catalyze the hydrolysis of xylan, a major hemicellulose component of cell wall besides cellulose in most plant species. To extract cellulose fibers, it will be invaluable to screen for more effective xylanase-producing microorganisms. In this paper a new strategy for easy screening of xylanase-producing strains from the degumming line was presented. Using this strategy, a weak-acidic, cellulase-free xylanase from Bacillus subtilis has been isolated, purified and characterized. The xylanase showed high specific activity (36,633.4 U/mg), presented stable characteristics and can be separated and purified simply, with molecular weight 23.3 kD, pI 9.63. It reached its optimal activity at pH 5.8 and 60 °C, and retained over 80% of its maximal activity after pre-incubation at temperature 60 °C or pH 4.6 ∼ 6.4. Also, a two-step purification procedure based on the combination of ultrafiltration and gel filtration chromatography was introduced and described, achieving 17-fold purification with 68.11% yield. (© 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim) [ABSTRACT FROM AUTHOR]

It is a difficult task to analyze the coupling characteristics of rotating machinery fault signals under the influence of complex and nonlinear interference signals. This difficulty is due to the strong noise background of rotating machinery fault feature extraction and weaknesses, such as modal mixing problems, in the existing Ensemble Empirical Mode Decomposition (EEMD) time–frequency analysis methods. To quantitatively study the nonlinear synchronous coupling characteristics and information transfer characteristics of rotating machinery fault signals between different frequency scales under the influence of complex and nonlinear interference signals, a new nonlinear signal processing method—the harmonic assisted multivariate empirical mode decomposition method (HA-MEMD)—is proposed in this paper. By adding additional high-frequency harmonic-assisted channels and reducing them, the decomposing precision of the Intrinsic Mode Function (IMF) can be effectively improved, and the phenomenon of mode aliasing can be mitigated. Analysis results of the simulated signals prove the effectiveness of this method. By combining HA-MEMD with the transfer entropy algorithm and introducing signal processing of the rotating machinery, a fault detection method of rotating machinery based on high-frequency harmonic-assisted multivariate empirical mode decomposition-transfer entropy (HA-MEMD-TE) was established. The main features of the mechanical transmission system were extracted by the high-frequency harmonic-assisted multivariate empirical mode decomposition method, and the signal, after noise reduction, was used for the transfer entropy calculation. The evaluation index of the rotating machinery state based on HA-MEMD-TE was established to quantitatively describe the degree of nonlinear coupling between signals to effectively evaluate and diagnose the operating state of the mechanical system. By adding noise to different signal-to-noise ratios, the fault detection ability of HA-MEMD-TE method in the background of strong noise is investigated, which proves that the method has strong reliability and robustness. In this paper, transfer entropy is applied to the fault diagnosis field of rotating machinery, which provides a new effective method for early fault diagnosis and performance degradation-state recognition of rotating machinery, and leads to relevant research conclusions. [ABSTRACT FROM AUTHOR]

We demonstrate the design, fabrication and characterization of a highly efficient multichannel W3 Y-branch filter in a two dimensional triangular-lattice photonic crystal slab. The coupling properties between high-order waveguide modes and fundamental resonant modes are investigated. By finely adjusting the size of resonant cavities, four higher-order mode channels with different output wavelengths are experimentally realized, which is in agreement with the theoretical simulations. The results show that this kind of filter may be useful in optical integrated circuits with high coupling and transmission efficiency. [ABSTRACT FROM AUTHOR]

The ubiquitous Acinetobacter baumannii is an important and troublesome pathogen of nosocomial infection. Multidrug-resistant A baumannii meningitis is very difficult to treat, usually with high mortality. The disease is generally associated with craniotomy, but rarely with lumbar puncture. However, in our case, a 45-year-old male construction worker suffered multidrug-resistant A baumannii meningitis associated with lumbar puncture. The patient responded poorly to the initial treatment with an intravenous infusion of tigecycline. However, later treatment with an intrathecal injection of tigecycline (concentration 1 mg/mL) at a dose of 10 mg every 12 hours proved to be highly efficacious. Thus, intrathecal injection of tigecycline should be seriously considered as a treatment for multidrug-resistant A baumannii meningitis., Competing Interests: Competing interests: None declared.