Search

This study evaluated the potential effectiveness of screen filters in relieving visual fatigue. Critical flicker frequency (CFF), accommodation power, visual acuity, and subjective rating of visual fatigue were evaluated at four different stages: without screen filter, screen filter use of 2.5 mo., 5 mo., and 12 mo. For each stage, all measurements were taken before and after an 8-hr. workday. Analysis of variance was performed to test whether the screen filter use or measurement time had a significant effect on any of the visual fatigue measurements. The results indicated visual acuity was significantly improved after the use of a screen filter, while after the screen filter was installed, the CFF reading showed visual fatigue was more pronounced. Significant improvement in subjective ratings of double vision on screen was found after the screen filter use of 2.5 mo., but improvements disappeared after continuous use at 5 too. A Hawthorne effect could have contributed to the short-term relief in visual fatigue and inconsistent findings in other visual performance measurements. Sorting out frequently used questions into a few definable areas and data sets might reduce the screen viewing time and visual fatigue more effectively.

The study derived seven descriptors from the pixel matrices of both the uppercase and lowercase forms of the 26 letters in the English alphabet in the regular and italic versions of the most commonly used font, Times New Roman. A factor analysis of the seven descriptors showed that a two-factor solution of letter width and height explained 76.6% of the variance. Legibility threshold of the 26 letters in the regular and italic Times Roman font and in two-case forms were collected to specify effects of letter width and height. 20 university students, 10 women and 10 men, with a mean age of 24.1 yr. (SD = 1.6) participated. They identified letters displayed initially on a PC screen at a minimum font size and enlarged gradually until the participant correctly recognized the letter. Analysis showed letters of greater width or height were more legible than those of smaller width or height. Given an oblique effect, letters in the italic Times Roman font had significantly greater width but were less legible than those in the regular font.

Potential ergonomic hazards for 27 disabled call center agents engaged in computer-telephone interactive tasks were evaluated for possible associations between the task behaviors and work-related disorders. Data included task description, 300 samples of performance, a questionnaire on workstation design, body-part discomfort rating, perceived stress, potential job stressors, and direct measurement of environmental factors. Analysis indicated agents were frequently exposed to prolonged static sitting and repetitive movements, together with unsupported back and flexed neck, causing musculoskeletal discomforts. Visual fatigue (85.2% of agents), discomfort of ears (66.7%), and musculoskeletal discomforts (59.3%) were the most pronounced and prevalent complaints after prolonged working. 17 of 27 agents described job pressure as high or very high, and dealing with difficult customers and trying to fulfill the customers' needs within the time standard were main stressors. Further work on surrounding noise, earphone use, possible hearing loss of experienced agents, training programs, feasible solutions for visual fatigue, musculoskeletal symptoms, and psychosocial stress should be conducted.

Contributing factors to 621 occupational fatal falls have been identified with respect to the victim's individual factors, the fall site, company size, and cause of fall. Individual factors included age, gender, experience, and the use of personal protective equipment (PPE). Accident scenarios were derived from accident reports. Significant linkages were found between causes for the falls and accident events. Falls from scaffold staging were associated with a lack of complying scaffolds and bodily action. Falls through existing floor openings were associated with unguarded openings, inappropriate protections, or the removal of protections. Falls from building girders or other structural steel were associated with bodily actions and improper use of PPE. Falls from roof edges were associated with bodily actions and being pulled down by a hoist, object or tool. Falls through roof surfaces were associated with lack of complying scaffolds. Falls from ladders were associated with overexertion and unusual control and the use of unsafe ladders and tools. Falls down stairs or steps were associated with unguarded openings. Falls while jumping to a lower floor and falls through existing roof openings were associated with poor work practices. Primary and secondary prevention measures can be used to prevent falls or to mitigate the consequences of falls and are suggested for each type of accident. Primary prevention measures would include fixed barriers, such as handrails, guardrails, surface opening protections (hole coverings), crawling boards/planks, and strong roofing materials. Secondary protection measures would include travel restraint systems (safety belt), fall arrest systems (safety harness), and fall containment systems (safety nets). Keywords: Fatal falls; Falls from height; Construction ergonomics; Construction site safety

The bikeshare program in Taipei City and New Taipei City, called U-bike, was launched in August 2012 and has more than 7500 bicycles operating out of 769 stations. Research has suggested that bicycle helmet use is a means of reducing morbidity and mortality among bike users. Helmets, however, are not available for rent when a U-bike is rented. The current research conducted an observational study to examine the prevalence of helmet non-use by users of the bikeshare program, electric bicycles, racing bicycles, and personal bicycles in Taipei City and New Taipei City. Trained observers using compact video cameras collected helmet non-use data during various times of the day and on different days of the week. Observers collected data on cyclist attributes, bicycle types, and helmet use at several selected locations within Taipei City and New Taipei City. U-bike users were found to be the least likely to wear helmets. Other noteworthy findings include that violations such as phone use, red-light violations, and travelling at ≥25 km/h were associated with riding without a helmet. Male users of racing bikes tended not to wear helmets, while female users of other bicycle types were less likely to use a helmet. Carrying passengers by users of electric bikes and personal bikes was a determinant of helmet non-use. This paper concludes with a discussion and recommendations for future research. [ABSTRACT FROM AUTHOR]

INTRODUCTION Visual display terminals (VDTs) can be used to store and convey static and dynamic visual information, and thus they have inevitably become interfaces in both the office and the […], We compared 7 methods of measuring visual fatigue - accommodation power, visual acuity, pupil diameter, critical fusion frequency (CFF), eye movement velocity, subjective rating of visual fatigue, and task performance - for their sensitivity to visual load. In the experiment, 10 participants performed a monitoring task at 2 viewing distances, read articles under 2 levels of screen contrast, and tracked visual targets at 2 different speeds. The same measurement techniques, excluding pupil diameter and eye movement velocity, were compared by extending the task time from 20 to 60 min with the same VDT tasks to test for possible improvement in sensitivity. The results indicated that sensitivities of accommodation power, visual acuity, and CFF were greatly improved by a longer task period, but these 3 measurement techniques did not distinguish among tasks. Pupil diameter, eye movement velocity, and subjective rating of visual fatigue were sensitive in differentiating tracking from reading and monitoring tasks. Eye movement velocity and subjective rating were sensitive to the changes in target velocity of the tracking task. Although task performance was not directly comparable to other measurement techniques, it helped to ensure that participants maintained the same performance level by devoting more resources to the high-load conditions. Actual or potential applications of this research include using some of these assessment techniques for the design of adaptive displays.

Many disabled individuals lack extensive knowledge about assistive technology, which could help them use computers. In 1997, Denis Anson developed a decision tree of 49 evaluative questions designed to evaluate the functional capabilities of the disabled user and choose an appropriate combination of assistive devices, from a selection of 26, that enable the individual to use a computer. In general, occupational therapists guide the disabled users through this process. They often have to go over repetitive questions in order to find an appropriate device. A disabled user may require an alphanumeric entry device, a pointing device, an output device, a performance enhancement device, or some combination of these. Therefore, the current research eliminates redundant questions and divides Anson's decision tree into multiple independent subtrees to meet the actual demand of computer users with disabilities. The modified decision tree was tested by six disabled users to prove it can determine a complete set of assistive devices with a smaller number of evaluative questions. The means to insert new categories of computer-related assistive devices was included to ensure the decision tree can be expanded and updated. The current decision tree can help the disabled users and assistive technology practitioners to find appropriate computer-related assistive devices that meet with clients' individual needs in an efficient manner. [ABSTRACT FROM PUBLISHER]

A dynamic visual information processing task was designed to investigate time-based and intensity-based factors on an operator's information processing load as measured by reaction time, pupil diameter, and eye movement parameters. The time-based factor was manipulated by the target rate and scanning rate while the intensity-based factor was manipulated by the difference between a simple reaction task and a physical matching (choice reaction) task. Nine participants tracked the scanning line at two different scanning rates and were required to respond to two designated targets presented singly at two different temporal frequencies. The results indicated that task difficulty (the intensity-based factor) had a significant effect on the reaction time. Target rate and scanning rate were integrated as one time-based factor in terms of three sweeping angles. The time-based factor was found to have a significant effect on the fixation time, saccade amplitude, fixation frequency, eye movement speed, reaction time and hit rate. No interaction effect was found between time-based and intensity-based factors. The time pressure (defined by the time required divided by the time available) based on a model human processor was positively related to scanning rate, target rate and task difficulty. It was found to be the most objective and reliable if time required can be reliably predicted based on a predictive model approach. [ABSTRACT FROM AUTHOR]

As inspection moves from unaided human skills to human-computer hybrid tasks, there is a need for models of the human and the computer which have common parameters. With appropriate models, functions can be allocated to produce optimal designs, and assistance provided to the human inspector via job aids and training. A model was developed of the human in a two-component compound inspection task consisting of search and decision. Optimizing this model showed that the choice of optimal values of parameters in the two submodels was independent. Ten subjects were tested on a two-component inspection task, using components which had earlier been validated separately. Subjects showed some aspects of optimum behaviour, for example sub-model independence, stopping the search after an integral number of scans, and varying their decision criteria to respond to the probability and cost structure. However, in this more complex task, subjects often reverted to simpler decision rules, for example always stopping the search after one scan or accepting (or rejecting) all potential defects detected. The implication for hybrid automation systems is that humans will need help such as job aids or training if they are to perform optimally when given both search and decision tasks. [ABSTRACT FROM AUTHOR]

The purpose of this research was to develop a new model to describe and predict a computerized task. AutoCAD was utilized as the experimental tool to collect operating procedure and time data at a keystroke level for a computer aided design (CAD) task. Six undergraduate students participated in the experiment. They were required to complete one simple and one complex engineering drawing. A model which characterized the task performance by software commands and predicted task execution time using keystroke-level model operators was proposed and applied to the analysis of the dialogue data. This task parameter model adopted software commands, e.g. LINE, OFFSET in AutoCAD, to describe the function of a task unit and used up to five parameters to indicate the number of keystrokes, chosen function for a command and ways of starting and ending a command. Each task unit in the task parameter model can be replaced by a number of primitive operators as in the keystroke level model to predict the task execution time. The observed task execution times of all task units were found to be highly correlated with the task execution times predicted by the keystroke level model. Therefore, the task parameter model was proved to be a usable analytical tool for evaluating the human-computer interface (HCI). [ABSTRACT FROM AUTHOR]

Presents a study experiment which aimed at accuracy of the eye for targeting of nine different positions and two sizes. Methodology used in the study; Indication that analysis showed the target position had a strong effect on the vertical shift; Effects of the target; Indepth look at the results of the study.

Presents information on a study used to investigate visual sensitivity and bias in humans, in inspecting irregular objects. Details on the participants used in the study; Method in which the study was conducted; Analysis of the results; Discussion of the study.

Presents information on an experiment that examines the speed-accuracy of eye movements between two targets in relation to size and distance as predicted by Fitts' Law. Details on the subjects used in the experiment; Method in which the experiment was conducted; Analysis of the data collected; Discussion of Fitts' Law.

Both learning curve models and subjective mental workload are useful tools for determining the length of training for new workers and predicting future task performance. An experiment was designed to collect the task completion times and subjective mental workload of five driving tasks including (a) reverse into garage, (b) 3-point turn, (c) parallel parking, (d) S-curve and (e) up-down-hill. The results indicated that task completion times of truck driving can be predicted with a learning curve. Practice significantly reduced the mental workload rating. However, the novice trainees tended to have a more significant reduction because, compared to experienced trainees, they tended to give greater or lower workload scores than the experienced trainees before and after practice, respectively. The current study may not be complete enough to provide guidelines for a training programme, but it is adequate to suggest that learning rate and workload measure can serve as indexes for factoring in the individual differences. Practitioner summary: Learning curves can be used to determine the length of training for new workers and performance standards for a particular task. Learning rate and mental workload were found to be important measures for comparing individual differences in order to better design a training programme. However, mental workload must be evaluated by experienced participants.

The current study applied Structural Equation Modelling to analyse the relationship among pitch, loudness, tempo and timbre and their relationship with perceived sound quality. Twenty-eight auditory signals of horn, indicator, door open warning and parking sensor were collected from 11 car brands. Twenty-one experienced drivers were recruited to evaluate all sound signals with 11 semantic differential scales. The results indicate that for the continuous sounds, pitch, loudness and timbre each had a direct impact on the perceived quality. Besides the direct impacts, pitch also had an impact on loudness perception. For the intermittent sounds, tempo and timbre each had a direct impact on the perceived quality. These results can help to identify the psychoacoustic attributes affecting the consumers' quality perception and help to design preferable sounds for vehicles. In the end, a design guideline is proposed for the development of auditory signals that adopts the current study's research findings as well as those of other relevant research. Practitioner Summary: This study applied Structural Equation Modelling to analyse the relationship among pitch, loudness, tempo and timbre and their relationship with perceived sound quality. The result can help to identify psychoacoustic attributes affecting the consumers' quality perception and help to design preferable sounds for vehicles.

Handgrip strength is essential in manual operations and activities of daily life, but the influence of forearm/hand skin temperature on estimation of handgrip strength is not well documented. Therefore, the present study intended to investigate the effect of local cooling of the forearm/hand on estimation of handgrip strength at various target force levels (TFLs, in percentage of MVC) for both genders. A cold pressor test was used to lower and maintain the hand skin temperature at 14°C for comparison with the uncooled condition. A total of 10 male and 10 female participants were recruited. The results indicated that females had greater absolute estimation deviations. In addition, both genders had greater absolute deviations in the middle range of TFLs. Cooling caused an underestimation of grip strength. Furthermore, a power function is recommended for establishing the relationship between actual and estimated handgrip force. Statement of relevance: Manipulation with grip strength is essential in daily life and the workplace, so it is important to understand the influence of lowering the forearm/hand skin temperature on grip-strength estimation. Females and the middle range of TFL had greater deviations. Cooling the forearm/hand tended to cause underestimation, and a power function is recommended for establishing the relationship between actual and estimated handgrip force. Practitioner Summary: It is important to understand the effect of lowering the forearm/hand skin temperature on grip-strength estimation. A cold pressor was used to cool the hand. The cooling caused underestimation, and a power function is recommended for establishing the relationship between actual and estimated handgrip force., Statement of Relevance: Manipulation with grip strength is essential in daily life and the workplace, so it is important to understand the influence of lowering the forearm/hand skin temperature on grip-strength estimation. Females and the middle range of TFL had greater deviations. Cooling the forearm/hand tended to cause underestimation, and a power function is recommended for establishing the relationship between actual and estimated handgrip force., Practitioner Summary: It is important to understand the effect of lowering the forearm/hand skin temperature on grip-strength estimation. A cold pressor was used to cool the hand. The cooling caused underestimation, and a power function is recommended for establishing the relationship between actual and estimated handgrip force

The current study reanalyzed 250 electrical fatalities in the construction industry from 1996 to 2002 into seven patterns based on source of electricity (power line, energized equipment, improperly installed or damaged equipment), direct contact or indirect contact through some source of injury (boom vehicle, metal bar or pipe, and other conductive material). Each fatality was coded in terms of age, company size, experience, performing tasks, source of injury, accident cause and hazard pattern. The Chi-square Automatic Interaction Detector (CHAID) was applied to the coded data of the fatal electrocution to find a subset of predictors that might derive meaningful classifications or accidents scenarios. A series of Flow Diagrams was constructed based on CHAID result to illustrate the flow of electricity travelling from electrical source to human body. Each of the flow diagrams can be directly linked with feasible prevention strategies by cutting the flow of electricity.

The current study derived seven descriptors from the pixel matrix of 5401 Chinese characters in the commonly used Ming, Kai, Li, and Hei fonts. A factor analysis was used to reduce the number of descriptors for a validation experiment. The three-factor solution (number of strokes, character height, and character width) explaining 89.54% of the variance was derived from 5401 characters in four fonts. A 4 x 2 x 2 x 2 factorial experiment using fonts, number of strokes, character height, and character width as the independent variables was conducted to evaluate the impact of each critical factor on the legibility of Chinese characters. Each tested character was chosen from the 500 most commonly used characters to minimize the effect of familiarity and ensure that all participants could recognize the character if it was legible. The 16 university students who participated in the experiment were asked to identify a Chinese character initially displayed on a PC screen at its minimum size and enlarged gradually until the participant could recognize it. The analysis of variance suggests that all the main effects of font, number of strokes, character height, and character width are significant. The legibility thresholds of the four type styles from the most to the least legible are in the Hei, Ming, Kai, and Li sequence. Number of strokes is the only significant factor in predicting the legibility threshold for each individual font. However, if predicting the legibility threshold across four fonts, character height is the other significant factor with about the same predictive power as number of strokes. The legible threshold is increased by the number of strokes and decreased by the character height and character width.