Search

In the global market era, food product control is very challenging. It is impossible to track and control all production and delivery chains not only for regular customers but also for the State Sanitary Inspections. Certified laboratories currently use accurate food safety and quality inspection methods. However, these methods are very laborious and costly. The present review highlights the need to develop fast, robust, and cost-effective analytical assays to determine food contamination. Application of the molecularly imprinted polymers (MIPs) as selective recognition units for chemosensors' fabrication was herein explored. MIPs enable fast and inexpensive electrochemical and optical transduction, significantly improving detectability, sensitivity, and selectivity. MIPs compromise durability of synthetic materials with a high affinity to target analytes and selectivity of molecular recognition. Imprinted molecular cavities, present in MIPs structure, are complementary to the target analyte molecules in terms of size, shape, and location of recognizing sites. They perfectly mimic natural molecular recognition. The present review article critically covers MIPs' applications in selective assays for a wide range of food products. Moreover, numerous potential applications of MIPs in the food industry, including sample pretreatment before analysis, removal of contaminants, or extraction of high-value ingredients, are discussed. [ABSTRACT FROM AUTHOR]

Herein we described a post-imprinting modification of the imprinted molecular cavities for electrochemical sensing of a target protein. Imprinted molecular cavities were generated by following the semi-covalent surface imprinting approach. These mesoporous cavities were modified with a ferrocene 'electrochemical' tracer for electrochemical transduction of the target protein recognition. Electrochemical sensors prepared after post-imprinting modification showed a linear response in the concentration range of 0.5 to 50 μM. Chemosensors fabricated based on capacitive impedimetric transduction demonstrated that imprinted molecular cavities without post-imprinting modification showed better selectivity. Scanning electrochemical microscopy (SECM) was used for the surface characterization of imprinted molecular cavities modified with ferrocene electrochemical tracers. SECM analysis performed in the feedback mode monitor changes in the surface state of the ferrocene-modified polymer film. The kinetics of the mediator regeneration was almost 1.8 times higher on the non-imprinted surface versus the post-imprinting modified molecular imprinted polymer. [ABSTRACT FROM AUTHOR]

Strong nonspecific protein/cell adhesion on conducting polymer (CP)-based bioelectronic devices can cause an increase in the impedance or the malfunction of the devices. Incorporating oligo(ethylene glycol) or zwitterionic functionalities with CPs has demonstrated superior performance in the reduction of nonspecific adhesion. However, there is no report on the evaluation of the antifouling stability of oligo(ethylene glycol) and zwitterion-functionalized CPs under electrical stimulation as a simulation of the real situation of device operation. Moreover, there is a lack of understanding of the correlation between the molecular structure of antifouling CPs and the antifouling and electrochemical stabilities of the CP-based electrodes. To address the aforementioned issue, we fabricated a platform with antifouling poly(3,4-ethylenedioxythiophene) (PEDOT) featuring tri(ethylene glycol), tetra(ethylene glycol), sulfobetaine, or phosphorylcholine (PEDOT-PC) to evaluate the stability of the antifouling/electrochemical properties of antifouling PEDOTs before and after electrical stimulation. The results reveal that the PEDOT-PC electrode not only exhibits good electrochemical stability, low impedance, and small voltage excursion, but also shows excellent resistance toward proteins and HAPI microglial cells, as a cell model of inflammation, after the electrical stimulation. The stable antifouling/electrochemical properties of zwitterionic PEDOT-PC may aid its diverse applications in bioelectronic devices in the future. [ABSTRACT FROM AUTHOR]

We have proposed a novel assay for lipases and esterases activity determination based on potentiometry with ion-selective electrodes (ISEs). Enzyme preparations, obtained from the living cells, are complex mixtures of various proteins, short peptides, lipids, carbohydrates, and other compounds. The most commonly used quantitative methods in enzyme studies are based on spectrophotometric or spectroflourimetric protocols which has significant limitations. They are not valid for samples that are turbid or strongly colored. To overcome those drawbacks we have proposed an assay based on potentiometry with ISEs for lipases and esterases activity determination. This electrochemical methodology represents an attractive tool for enzyme analysis, because of its low detection limit, independence from sample volume and from sample turbidity. The usefulness of this assay has been proven by the determination of the activity of various raw enzymes “acetone powders” isolated from animal tissues. Moreover, activities of fractions obtained during purification of one of those raw biocatalysts were also determined that way. The reliability of determination enzyme activity with ISE assay was proven by comparison with a classical spectrophotometric method. [ABSTRACT FROM AUTHOR]

Molecular imprinting in polymers leads, among others, to synthetic receptors of high selectivity, comparable to that of their biological counterparts. Deposition of a thin non-porous molecularly imprinted polymer (MIP) film directly on a transducer surface enables fabrication of chemosensors for various health relevant biocompounds. However, the sensitivity of a chemosensor with such an MIP film as the recognition unit is limited, mostly because of slow analyte diffusion through this film. Herein, a simple procedure was developed to enhance, in a controlled way, the active surface area of an l-arabitol imprinted polymer film. For this, a macroporous MIP-(l-arabitol) film was synthesized and simultaneously deposited on a gold electrode of a quartz crystal resonator transducer by potentiodynamic electropolymerization. This large surface area film effectively enhanced analytical signals of mass changes at a quartz crystal microbalance. Hence, the l-arabitol limit of quantification was ∼16-fold better than that of the corresponding non-porous MIP film of the same mass. [ABSTRACT FROM AUTHOR]

A molecularly imprinted polymer (MIP)-based chemosensor for the selective determination of a chosen toxin, N-nitroso- l-proline (Pro-NO), was devised and fabricated. By means of DFT, the structure of the pre-polymerization (functional monomer)-template complex was modeled. This complex was then potentiodynamically electropolymerized in the presence of cross-linking monomer to form a MIP-Pro-NO thin film. Next, the Pro-NO template was extracted from MIP-Pro-NO with 0.1 m NaOH. Piezoelectric microgravimetry (PM) on an electrochemical quartz crystal microbalance and electrochemical (differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS)) techniques were used to transduce binding of Pro-NO to molecular cavities of the MIP-Pro-NO. With DPV and EIS chemosensing, the limits of detection (LODs) were about 80.9 and 36.9 nM Pro-NO, respectively; and the selectivity coefficients for urea, glucose, creatinine, and adrenalin interferences were 6.6, 13.2, 2.1, and 2.0, respectively, with DPV as well as 2.3, 2.0, 3.3, and 2.5, respectively, with EIS. With PM under flow injection analysis conditions, the LOD was 10 μ m Pro-NO. The MIP-Pro-NO chemosensor detectability and selectivity with respect to interferences were sufficiently high to determine Pro-NO in protein-providing food products. [ABSTRACT FROM AUTHOR]

Receptors generated by natural evolution in living organisms show an astonishing capacity for specifically recognizing target molecules. If applied as recognition units of biosensors, these receptors provide very high selectivity. However, they suffer from instability under measurement conditions, and low durability. Devising alternative robust artificial receptors circumvents these deficiencies. For instance, an antibody can be successfully replaced by a corresponding molecularly imprinted polymer (MIP), sometimes called a ‘plastic antibody’. Therefore, MIPs used as recognition units in chemical sensors are gaining increasing interest. In this review, we survey selected examples of MIPs used for determining target bioanalytes by mimicking natural recognition. For scientists working with biosensors, MIPs might be considered as alternatives to natural receptors, such as antibodies, enzymes, or histones. [ABSTRACT FROM AUTHOR]

We devised and prepared a conducting molecularly imprinted polymer (MIP) for human serum albumin (HSA) determination using semi-covalent imprinting. The bis(2,2′-bithien-5-yl)methane units constituted the MIP backbone. This MIP was deposited as a thin film on an Au electrode by oxidative potentiodynamic electropolymerization to fabricate an electrochemical chemosensor. The HSA template imprinting, and then its releasing from the MIP was confirmed by the differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), XPS, and PM-IRRAS measurements as well as by AFM imaging. Semi-covalent imprinting provided a very well defined locations of recognition sites in the MIP molecular cavities. These sites populated the imprinted cavities or the MIP surface only. The DPV and EIS response of the MIP film coated electrode to the HSA analyte was linear in the range of 0.8 to 20 and 4 to 80 µg/mL HSA, respectively, with the limit of detection of 16.6 and 800 ng/mL, respectively. The impressively high imprinting factor reached, exceeding 20, strongly confirmed that semi-covalent imprinting resulted in formation of a large number of very well defined molecular cavities with high affinity to the HSA molecules. The MIP selectivity against low-(molecular weight) interferences, common for physiological fluids, such as blood and urea, was very high. There was no response to the presence of these interferences at concentrations encountered in the samples analyzed. Moreover, the chemosensor selectivity to the myoglobin and cytochrome c interferences was excellent while that to lysozyme was slightly lower but still high. The chemosensor was useful for determination of abnormal HSA concentration in a control blood serum. [ABSTRACT FROM AUTHOR]

Liquid crystal-based sensors offer the advantage of high sensitivity at a low cost. However, they often lack selectivity altogether or require costly and unstable biomaterials to impart this selectivity. To incur this selectivity, we herein integrated a molecularly imprinted polymer (MIP) film recognition unit with a liquid crystal (LC) in an optical cell transducer. We tested the resulting chemosensor for protein determination. We examined two different LCs, each with a different optical birefringence. That way, we revealed the influence of that parameter on the sensitivity of the (human serum albumin)-templated (MIP-HSA) LC chemosensor. The response of this chemosensor with the (MIP-HSA)-recognizing film was linear from 2.2 to 15.2 µM HSA, with a limit of detection of 2.2 µM. These values are sufficient to use the devised chemosensor for HSA determination in biological samples. Importantly, the imprinting factor (IF) of this chemosensor was appreciable, reaching IF = 3.7. This IF value indicated the predominant binding of the HSA through specific rather than nonspecific interactions with the MIP. [ABSTRACT FROM AUTHOR]

Review: 20 refs. [ABSTRACT FROM AUTHOR]

New thiophene-carbazole functional and cross-linking monomers electropolymerizing at potentials sufficiently low for molecular imprinting of an electroactive aripiprazole antipsychotic drug were herein designed and synthesized. Numerous conducting molecularly imprinted polymer (MIP) films are deposited by electropolymerization at relatively low potentials by electro-oxidation of pyrrole, aniline, phenol, or 3,4-ethylenedioxythiophene (EDOT). However, their interactions with templates are not sufficiently strong. Hence, it is necessary to introduce additional recognizing sites in these cavities to increase their affinity to the target molecules. For that, functional monomers derivatized with substituents forming stable complexes with the templates are used. However, oxidation potentials of these derivatives are often, disadvantageously, higher than that of parent monomers. Therefore, we designed and synthesized new functional and cross-linking monomers, which are oxidized at sufficiently low potentials. The deposited MIP and non-imprinted polymer (NIP) films were characterized by PM-IRRAS and UV–vis spectroscopy and imaged with AFM. The structure of the aripiprazole pre-polymerization complex with functional monomers was optimized with density functional theory (DFT), and aripiprazole interactions with imprinted cavities were simulated with molecular mechanics (MM) and molecular dynamics (MD). MIP-aripiprazole film-coated electrodes were used as extended gates for selective determination of aripiprazole with the extended-gate field-effect transistor (EG-FET) chemosensor. The linear dynamic concentration range was 30–300 pM, and the limit of detection was 22 fM. An apparent imprinting factor of the MIP-1 was IF = 4.95. The devised chemosensor was highly selective to glucose, urea, and creatinine interferences. The chemosensor was successfully applied for aripiprazole determination in human plasma. The results obtained were compared to those of the validated HPLC-MS method. Image 1 • An antipsychotic drug, aripiprazole, was imprinted for the first time. • New thiophene-carbazole functional and cross-linking monomers were designed. • Low oxidation potential monomers were applied in electroactive template imprinting. • MIP EG-FET chemosensor enabled aripiprazole determination in human serum plasma. • The MIP EG-FET determination method was cross-validated by HPLC-MS. [ABSTRACT FROM AUTHOR]

• For controlled co-polymerization molar ratio of monomers of low and high oxidation potential in solution is optimized. • Co-polymerization at lower oxidation potential suppresses electrode reaction of electroactive template. • Imprinting of an electroactive analyte in electropolymerizable functional monomers is performed. • Fabricated imprinted polymer based electrochemical chemosensor shows high selectivity. Herein, we report an electrochemically initiated co-polymerization of two electroactive monomers of different oxidation potentials. The molar ratio of low oxidation potential monomer in the solution for electropolymerization was optimized to find condition suitable for co-polymerization of high-oxidation potential monomer effectively at lower oxidation potential. The XPS analysis confirmed successful co-polymerization. This co-polymerization condition was further used in imprinting of melatonin, an electroactive compound. Entrapment of melatonin in the polymer matrix was confirmed by measuring electroactivity of melatonin in the 0.1 M KCl−HCl solution (pH 1.6). This MIP based electrochemical sensor determined melatonin in the linear dynamic concentration range 10–80 μM. Detectability of proposed chemosensor was 0.14 μM (S/N = 3). The mean RSD for the concentration range studied was ∼20%. Selectivity of the chemosensor was satisfactory towards common structural analogues and biomolecules. Furthermore, the chemosensor was successfully used to determine melatonin in real samples. The sensitivity in the presence of matrix components and that for the KCl−HCl solution were quite similar. The results obtained indicate the suitability of the devised chemosensor for practical applications. [ABSTRACT FROM AUTHOR]

An elevated concentration of d -arabitol in urine, especially compared to that of l -arabitol or creatinine, is indicative of a fungal infection. For that purpose, we devised, fabricated, and tested chemical sensors determining d -arabitol. These chemosensors comprised the quartz crystal resonator (QCR) or extended-gate field-effect transistor (EG-FET) transducers integrated with molecularly imprinted polymer (MIP) film recognition units. To this end, we successfully applied a covalent approach to molecular imprinting, which involved formation of weak reversible covalent bonds between vicinal hydroxyl groups of arabitol and boronic acid substituents of the bithiophene functional monomer used. The MIP films were synthesized and simultaneously deposited on gold electrodes of quartz crystal resonators (Au-QCRs) or Au-glass slides by oxidative potentiodynamic electropolymerization. With the QCR and EG-FET chemosensors, the d -arabitol concentration was determined under flow-injection analysis and stagnant-solution binding conditions, respectively. Selectivity with respect to common interferences, and l -arabitol in particular, of the devised chemosensors was superior. Limits of detection and linear dynamic concentration ranges of the QCR and EG-FET chemosensors were 0.15 mM and 0.15 to 1.25 mM as well as 0.12 mM and 0.12 to 1.00 mM, respectively, being lower than the d -arabitol concentrations in urine of patients with invasive candidiasis (>220 μM). Therefore, the devised chemosensors are suitable for early diagnosis of fungal infections caused by Candida sp. yeasts. [ABSTRACT FROM AUTHOR]

Homogenous nanostructuration of molecularly imprinted polymer (MIP) films for follicle-stimulating hormone (FSH)-sensing was achieved by using optimized colloidal crystals as a hard mold. Introduction of a heating step after assembling colloidal crystals of silica beads promoted their adhesion. Thus, precise assembling of beads was not disturbed during further multisteps of surface imprinting, and crack-free hexagonal packing was maintained. Scanning electron microscopy imaging confirmed hexagonal packing of silica colloidal crystals as well as homogenous nanostructuration in MIP films. FSH immobilization over silica beads and later its derivatization with electroactive functional monomers was confirmed by X-ray photoelectron spectroscopy analysis. The nanostructured molecular recognition films prepared in this way were combined with an electrochemical transducer in order to design a capacitive impedimetry-based chemosensing system. It was tested for the determination of FSH in the range from 0.1 fM to 100 pM in 10 mM 2-(N-morpholino) ethane sulfonic acid buffer (pH = 4.2). The detection limit of the chemosensor was 0.1 fM, showing a high selectivity with respect to common protein interferences as well as other protein hormones of the gonadotropin family.

A molecularly imprinted polymer (MIP)-based chemosensor for the selective determination of a chosen toxin, N-nitroso-l-proline (Pro-NO), was devised and fabricated. By means of DFT, the structure of the pre-polymerization (functional monomer)-template complex was modeled. This complex was then potentiodynamically electropolymerized in the presence of cross-linking monomer to form a MIP-Pro-NO thin film. Next, the Pro-NO template was extracted from MIP-Pro-NO with 0.1 m NaOH. Piezoelectric microgravimetry (PM) on an electrochemical quartz crystal microbalance and electrochemical (differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS)) techniques were used to transduce binding of Pro-NO to molecular cavities of the MIP-Pro-NO. With DPV and EIS chemosensing, the limits of detection (LODs) were about 80.9 and 36.9 nM Pro-NO, respectively; and the selectivity coefficients for urea, glucose, creatinine, and adrenalin interferences were 6.6, 13.2, 2.1, and 2.0, respectively, with DPV as well as 2.3, 2.0, 3.3, and 2.5, respectively, with EIS. With PM under flow injection analysis conditions, the LOD was 10 μm Pro-NO. The MIP-Pro-NO chemosensor detectability and selectivity with respect to interferences were sufficiently high to determine Pro-NO in protein-providing food products., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)