Search

This clinical and radiographic prospective study evaluated bone loss around two-piece implants that were restored according to the platform-switching protocol. One hundred thirty-one implants were consecutively placed in 45 patients following a nonsubmerged surgical protocol. On 75 implants, a healing abutment 1 mm narrower than the implant platform was placed at the time of surgery. On the remaining implants, a healing abutment of the same diameter as the implant was inserted. All implants were positioned at the crestal level. Clinical and radiographic examinations were performed prior to surgery, at the end of surgery, 8 weeks after implant placement, at the time of provisional prosthesis insertion, at the time of definitive prosthesis insertion, and 12 months after loading. The data collected showed that vertical bone loss for the test cases varied between 0.6 mm and 1.2 mm (mean: 0.95 +/- 0.32 mm), while for the control cases, bone loss was between 1.3 mm and 2.1 mm (mean: 1.67 +/- 0.37 mm). These data confirm the important role of the microgap between the implant and abutment in the remodeling of the peri-implant crestal bone. Platform switching seems to reduce peri-implant crestal bone resorption and increase the long-term predictability of implant therapy. [ABSTRACT FROM AUTHOR]

The clinical applicability and predictability of osseointegrated implants in healthy patients have been studied extensively. Although successful treatment of patients with medical conditions including diabetes, arthritis, and cardiovascular disease has been described, insufficient information is available to determine the effects of diabetes on the process of osseointegration. An implant placed and intended to support an overdenture in a 65-year-old diabetic woman was prosthetically unfavorable and was retrieved after 2 months. It was then analyzed histologically. No symptoms of implant failure were detected, and histomorphometric evaluation showed the bone-to-implant contact percentage to be 80%. Osseointegration can be obtained when implants with a dual-acid-etched surface are placed in properly selected diabetic patients. [ABSTRACT FROM AUTHOR]

The aim of this study was to investigate the presence of an inflammatory infiltrate in the peri-implant soft tissue of single-implant crowns supported by either zirconia or titanium abutments in healthy subjects. Serial sections from formalin-fixed, paraffin-embedded blocks from peri-implant mucosa of 25 patients were immunohistochemically analyzed for CD3 and CD20 lymphocyte marker expression. The results showed that levels of T cells (CD3) were higher around zirconia than titanium abutments (p<0.05). On the contrary, the levels of B cells (CD20) were found higher around titanium abutment in comparison with the zirconia abutment. These differences were statistically significant (p<0.05). [ABSTRACT FROM AUTHOR]

A self-contained acoustical scintillation instrument is described that has been used to measure flow and turbulence characteristics in two diverse oceanographic settings. This instrument is a battery-operated and internally logging acoustic propagation system that is ideally suited to monitor long-term flow and small-scale effective refractive index fluctuations. When the temperature variability dominates the acoustic scattering, as is the case of a hydrothermal vent plume, then a measure of the vertical buoyancy-driven flow, together with the root-mean-square temperature fluctuations, can be obtained. Results for vent structure Hulk of the Main Endeavour vent field of the Juan de Fuca Ridge show that the long-term (71 days) temperature fluctuations, together with the vertical flow, can be used to estimate heat flux density. Measurements also show oscillations in the log-amplitude variance that result from plume advection by the ambient tidal currents and demonstrate the need for a long time series measurement. When the turbulent velocity dominates the acoustic scattering, as is the case in some energetic bottom boundary layer flows, then the turbulent kinetic energy dissipation rate is derived, assuming isotropic and homogeneous models. The methodology and results are summarized from an application to the Bosporus Canyon of the Black Sea, to monitor the flow and turbulence associated with Mediterranean seawater inflow. [ABSTRACT FROM AUTHOR]

The heparan sulfate (HS)-rich extracellular matrix (ECM) serves as an initial interaction site for the homotrimeric spike (S) protein of SARS-CoV-2 to facilitate subsequent docking to angiotensin-converting enzyme 2 (ACE2) receptors and cellular infection. More recent variants, notably Omicron, have evolved by swapping several amino acids to positively charged residues to enhance the interaction of the S-protein trimer with the negatively charged HS. However, these enhanced interactions may reduce Omicron's ability to move through the HS-rich ECM to effectively find ACE2 receptors and infect cells, raising the question of how to mechanistically explain HS-associated viral movement. In this work, we show that Omicron S proteins have evolved to balance HS interaction stability and dynamics, resulting in enhanced mobility on an HS-functionalized artificial matrix. This property is achieved by the ability of Omicron S-proteins to cross-link at least two HS chains, allowing direct S-protein switching between chains as a prerequisite for cell surface mobility. Optimized HS interactions can be targeted pharmaceutically, as an HS mimetic significantly suppressed surface binding and cellular infection specifically of the Omicron variant. These findings suggest a robust way to interfere with SARS-CoV-2 Omicron infection and potentially future variants., Competing Interests: Declarations. Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

The precise localization and activation of proteins at the cell membrane at a certain time gives rise to many cellular processes, including cell polarization, migration, and division. Thus, methods to recruit proteins to model membranes with subcellular resolution and high temporal control are essential when reproducing and controlling such processes in synthetic cells. Here, a method is described for fabricating light-regulated reversible protein patterns at lipid membranes with high spatiotemporal precision. For this purpose, we immobilize the photoswitchable protein iLID (improved light-inducible dimer) on supported lipid bilayers (SLBs) and on the outer membrane of giant unilamellar vesicles (GUVs). Upon local blue light illumination, iLID binds to its partner Nano (wild-type SspB) and allows the recruitment of any protein of interest (POI) fused to Nano from the solution to the illuminated area on the membrane. This binding is reversible in the dark, which provides dynamic binding and release of the POI. Overall, this is a flexible and versatile method for regulating the localization of proteins with high precision in space and time using blue light.

The nongenetic modification of cell membranes with proteins is a straightforward way of cellular engineering. In these processes, it is important to specifically address the proteins to liquid-ordered (Lo) or liquid-disordered (Ld) domains as this can largely affect their biological functions. Herein, we report a cholesterol analogue (CHIM) with a nitrilotriacetic acid (NTA) headgroup, named CHIM-NTA. CHIM-NTA integrates into lipid membranes similar to the widely used phospholipid-derived DGS-NTA and, when loaded with Ni 2+ , allows for specific membrane immobilization of any polyhistidine-tagged proteins of choice. Yet, unlike DGS-NTA, it localizes to the Lo phase in phase-separated giant unilamellar vesicles (GUVs) and allows addressing His-tagged proteins to Lo domains. Furthermore, CHIM-NTA readily integrates into the membranes of live cells and thus enables the nongenetic modification of the cell surface with proteins. Overall, CHIM-NTA provides a facile and flexible way to modify biological membranes, in particular Lo domains, with His-tagged proteins and can serve as a broadly applicable molecular tool for cell surface engineering.

Reversible protein patterning on model membranes is important to reproduce spatiotemporal protein dynamics in vitro . An engineered version of iLID, disiLID, with a disordered domain as a membrane tether improves the recruitment of Nano under blue light and the reversibility in the dark, which enables protein patterning on membranes with higher spatiotemporal precision.

Morphogens determine cellular differentiation in many developing tissues in a concentration dependent manner. As a central model for gradient formation during animal development, Hedgehog (Hh) morphogens spread away from their source to direct growth and pattern formation in the Drosophila wing disc. Although heparan sulfate (HS) expression in the disc is essential for this process, it is not known whether HS regulates Hh signaling and spread in a direct or in an indirect manner. To answer this question, we systematically screened two composite Hh binding areas for HS in vitro and expressed mutated proteins in the Drosophila wing disc. We found that selectively impaired HS binding of the second site reduced Hh signaling close to the source and caused striking wing mispatterning phenotypes more distant from the source. These observations suggest that HS constrains Hh to the wing disc epithelium in a direct manner, and that interfering with this constriction converts Hh into freely diffusing forms with altered signaling ranges and impaired gradient robustness., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Manikowski, Steffes, Froese, Exner, Ehring, Gude, Di Iorio, Wegner and Grobe.)

Cellular differentiation is directly determined by concentration gradients of morphogens. As a central model for gradient formation during development, Hedgehog (Hh) morphogens spread away from their source to direct growth and pattern formation in Drosophila wing and eye discs. What is not known is how extracellular Hh spread is achieved and how it translates into precise gradients. Here we show that two separate binding areas located on opposite sides of the Hh molecule can interact directly and simultaneously with two heparan sulfate (HS) chains to temporarily cross-link the chains. Mutated Hh lacking one fully functional binding site still binds HS but shows reduced HS cross-linking. This, in turn, impairs Hhs ability to switch between both chains in vitro and results in striking Hh gradient hypomorphs in vivo. The speed and propensity of direct Hh switching between HS therefore shapes the Hh gradient, revealing a scalable design principle in morphogen-patterned tissues., (© 2023. The Author(s).)

Rapid advancements of genome sequencing (GS) technologies have enhanced our understanding of the relationship between genes and human disease. To incorporate genomic information into the practice of medicine, new processes for the analysis, reporting, and communication of GS data are needed. Blood samples were collected from adults with a PCR-confirmed SARS-CoV-2 (COVID-19) diagnosis (target N = 1500). GS was performed. Data were filtered and analyzed using custom pipelines and gene panels. We developed unique patient-facing materials, including an online intake survey, group counseling presentation, and consultation letters in addition to a comprehensive GS report. The final report includes results generated from GS data: (1) monogenic disease risks; (2) carrier status; (3) pharmacogenomic variants; (4) polygenic risk scores for common conditions; (5) HLA genotype; (6) genetic ancestry; (7) blood group; and, (8) COVID-19 viral lineage. Participants complete pre-test genetic counseling and confirm preferences for secondary findings before receiving results. Counseling and referrals are initiated for clinically significant findings. We developed a genetic counseling, reporting, and return of results framework that integrates GS information across multiple areas of human health, presenting possibilities for the clinical application of comprehensive GS data in healthy individuals., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Synthetic cells, which are assembled anew from well-defined molecular parts, open-up new possibilities for nanotechnological applications due to their reduced complexity and high functionality. In this review, we discuss how synthetic cells are being implemented in different fields ranging from biomedicine to material science. On one hand, synthetic cells can serve as microreactors that house metabolic networks and as therapeutic carriers that directly communicate with living cells. On the other hand, synthetic cells can become active components in a new-generation of materials that process inputs and result in autonomous and adaptive behavior. These early examples highlight the potential impact that synthetic cells will have in future applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this article., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Stroke is a leading cause of death and disability worldwide. Women are disproportionately affected by stroke, exhibiting higher mortality and disability rates post-stroke than men. Clinical stroke research has historically included mostly men and studies were not properly designed to perform sex- and gender-based analyses, leading to under-appreciation of differences between men and women in stroke presentation, outcomes, and response to treatment. Reasons for these differences are likely multifactorial; some are due to gender-related factors (i.e. decreased social support, lack of stroke awareness), yet others result from biological differences between sexes. Unlike men, women often present with 'atypical' stroke symptoms. Lack of awareness of 'atypical' presentation has led to delays in hospital arrival, diagnosis, and treatment of women. Differences also extend to carotid atherosclerotic disease, a cause of stroke, where plaques isolated from women are undeniably different in morphology/composition compared to men. As a result, women may require different treatment than men, as evidenced by the fact that they derive less benefit from carotid revascularization than men but more benefit from medical management. Despite this, women are less likely than men to receive medical therapy for cardiovascular risk factor management. This review focuses on the importance of sex and gender in ischaemic stroke and carotid atherosclerotic disease, summarizing the current evidence with respect to (i) stroke incidence, mortality, awareness, and outcomes, (ii) carotid plaque prevalence, morphology and composition, and gene connectivity, (iii) the role of sex hormones and sex chromosomes in atherosclerosis and ischaemic stroke risk, and (iv) carotid disease management., (Published on behalf of the European Society of Cardiology. All rights reserved. © The Author(s) 2021. For permissions, please email: journals.permissions@oup.com.)

Natural supramolecular filaments have the ability to cross-link with each other and to interface with the cellular membrane via biomolecular noncovalent interactions. This behavior allows them to form complex networks within as well as outside the cell, i.e., the cytoskeleton and the extracellular matrix, respectively. The potential of artificial supramolecular polymers to interact through specific noncovalent interactions has so far only seen limited exploration due to the dynamic nature of supramolecular interactions. Here, a system of synthetic supramolecular tubes that cross-link forming supramolecular networks, and at the same time bind to biomimetic surfaces by the aid of noncovalent streptavidin-biotin linkages, is demonstrated. The architecture of the networks can be engineered by controlling the density of the biotin moiety at the exterior of the tubes as well as by the concentration of the streptavidin. The presented strategy provides a pathway for designing adjustable artificial supramolecular superstructures, which can potentially yield more complex biomimetic adaptive materials., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Male patients with Fabry disease (FD) are at high risk for the formation of antibodies to recombinant α-galactosidase A (AGAL), used for enzyme replacement therapy. Due to the rapid disease progression, the identification of patients at risk is highly warranted. However, currently suitable references and standardized protocols for anti-drug antibodies (ADA) determination do not exist. Here we generate a comprehensive patient-derived antibody mixture as a reference, allowing ELISA-based quantification of antibody titers from individual blood samples. Serum samples of 22 male patients with FD and ADAs against AGAL were pooled and purified by immune adsorption. ADA-affinities against agalsidase-α, agalsidase-β and Moss-AGAL were measured by quartz crystal microbalance with dissipation monitoring (QCM-D). AGAL-specific immune adsorption generated a polyclonal ADA mixture showing a concentration-dependent binding and inhibition of AGAL. Titers in raw sera and from purified total IgGs (r 2 = 0.9063 and r 2 = 0.8952, both p < 0.0001) correlated with the individual inhibitory capacities of ADAs. QCM-D measurements demonstrated comparable affinities of the reference antibody for agalsidase-α, agalsidase-β and Moss-AGAL (KD: 1.94 ± 0.11 µM, 2.46 ± 0.21 µM, and 1.33 ± 0.09 µM, respectively). The reference antibody allows the ELISA-based ADA titer determination and quantification of absolute concentrations. Furthermore, ADAs from patients with FD have comparable affinities to agalsidase-α, agalsidase-β and Moss-AGAL.

Understanding how emerging influenza viruses recognize host cells is critical in evaluating their zoonotic potential, pathogenicity, and transmissibility between humans. The surface of the influenza virus is covered with hemagglutinin (HA) proteins that can form multiple interactions with sialic acid-terminated glycans on the host cell surface. This multivalent binding affects the selectivity of the virus in ways that cannot be predicted from the individual receptor-ligand interactions alone. Here, we show that the intrinsic structural and energetic differences between the interactions of avian- or human-type receptors with influenza HA translate from individual site affinity and orientation through receptor length and density on the surface into virus avidity and specificity. We introduce a method to measure virus avidity using receptor density gradients. We found that influenza viruses attached stably to a surface at receptor densities that correspond to a minimum number of approximately 8 HA-glycan interactions, but more interactions were required if the receptors were short and human-type. Thus, the avidity and specificity of influenza viruses for a host cell depend not on the sialic acid linkage alone but on a combination of linkage and the length and density of receptors on the cell surface. Our findings suggest that threshold receptor densities play a key role in virus tropism, which is a predicting factor for both their virulence and zoonotic potential., Competing Interests: The authors declare no competing financial interest., (© 2020 American Chemical Society.)

Natural hydrocarbon seeps are ubiquitous along continental margins. Despite their significance, we lack a basic understanding of the long-term temporal variability of seep dynamics, including bubble size, rise velocity, composition, and upwelling and entrainment processes. The shortcoming makes it difficult to constrain the global estimates of oil and gas entering the marine environment. Here we report on a multi-method approach based on optical, acoustic, satellite remote sensing, and simulations, to connect the characteristics of a hydrocarbon seep in the Gulf of Mexico to its footprint on the sea surface. Using an in-situ camera, bubble dynamics at the source were measured every 6 h over 153 days and the integrated total hydrocarbon release volume was estimated as 53 m 3 . The vertical velocity was acoustically measured at 20 m above bed (mab) and found to be approximately 40% less than the dispersed-phase at the source, indicating that the measured values are reflecting the plume continuous-phase flow. Numerical simulations predict that the oily bubbles with diameters larger than 8 mm reach the surface with a small footprint, i.e. forming an oil slick origin, deflection of which with wind and surface current leads to the formation of an oil slick on the surface. Nineteen SAR images are used to estimate the oil seepage rate from GC600 for 2017 giving an average discharge of 14.4 cm 3 /s.

Thrombocytopenia is a common complication of influenza virus infection, and its severity predicts the clinical outcome of critically ill patients. The underlying cause(s) remain incompletely understood. In this study, in patients with an influenza A/H1N1 virus infection, viral load and platelet count correlated inversely during the acute infection phase. We confirmed this finding in a ferret model of influenza virus infection. In these animals, platelet count decreased with the degree of virus pathogenicity varying from 0% in animals infected with the influenza A/H3N2 virus, to 22% in those with the pandemic influenza A/H1N1 virus, up to 62% in animals with a highly pathogenic A/H5N1 virus infection. This thrombocytopenia is associated with virus-containing platelets that circulate in the blood. Uptake of influenza virus particles by platelets requires binding to sialoglycans and results in the removal of sialic acids by the virus neuraminidase, a trigger for hepatic clearance of platelets. We propose the clearance of influenza virus by platelets as a paradigm. These insights clarify the pathophysiology of influenza virus infection and show how severe respiratory infections, including COVID-19, may propagate thrombocytopenia and/or thromboembolic complications., (© 2020 by The American Society of Hematology.)

The development of model systems that mimic biological interactions and allow the control of both receptor and ligand densities, is essential for a better understanding of biomolecular processes, such as the recruitment of receptors at interfaces, at the molecular level. Here we report a model system based on supported lipid bilayers (SLBs) for the investigation of the clustering of receptors at their interface. Biotinylated SLBs, used as cell membrane mimics, were functionalized with streptavidin (SAv), used here as receptor. Subsequently, biotinylated small (SUVs) and giant (GUVs) unilamellar vesicles were bound to the SAv-functionalized SLBs by multivalent interactions and found to induce the recruitment of both SAv on the SLB surface and the biotin moieties in the vesicles. The recruitment of receptors was investigated with quartz crystal microbalance with dissipation monitoring (QCM-D), which allowed the identification of the biotin and SAv densities necessary to obtain receptor recruitment. At approx. 0.6% of biotin in the vesicles, a transition between dense and low vesicle packing was observed, which coincided with the transitions between recruitment in the vesicles vs. recruitment in the SLB and between full and partial use of the biotin moieties in the vesicle. Direct optical visualization of the clustering at the interface of individual GUVs with the SLB platform was achieved with fluorescence microscopy, showing recruitment of SAv at the contact area as well as the deformation of the vesicles upon binding. Different vesicle binding regimes were observed for lower and higher biotin densities in the vesicles and at the SLBs. A more quantitative analysis of the molecular parameters implied in the interaction, indicated that approx. 10% of the vesicle area constitutes the contact area. Moreover, the SUV binding and recruitment appeared to be fast on the analysis time scale, whereas the binding of GUVs is slower due to the larger SLB area over which SAv recruitment needs to occur. The mechanisms revealed in this study may provide insight in biological processes in which recruitment occurs., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

In the study of multivalent interactions at interfaces, as occur for example at cell membranes, the density of the ligands or receptors displayed at the interface plays a pivotal role, affecting both the overall binding affinities and the valencies involved in the interactions. In order to control the ligand density at the interface, several approaches have been developed, and they concern the functionalization of a wide range of materials. Here, different methods employed in the modification of surfaces with controlled densities of ligands are being reviewed. Examples of such methods encompass the formation of self-assembled monolayers (SAMs), supported lipid bilayers (SLBs) and polymeric layers on surfaces. Particular emphasis is given to the methods employed in the study of different types of multivalent biological interactions occurring at the functionalized surfaces and their working principles., Competing Interests: The authors declare no conflict of interest., (©2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

The immobilization of biomolecules onto polymeric surfaces employed in the fabrication of biomedical and biosensing devices is generally a challenging issue, as the absence of functional groups in such materials does not allow the use of common surface chemistries. Here we report the use of modified poly-l-lysine (PLL) as an effective method for the selective modification of polymeric materials with biomolecules. Cyclic olefin polymer (COP), Ormostamp, and polydimethylsiloxane (PDMS) surfaces were patterned with modified PLLs displaying either biotin or maleimide functional groups. Different patterning techniques were found to provide faithful microscale pattern formation, including micromolding in capillaries (MIMIC) and a hydrogel-based stamping device with micropores. The surface modification and pattern stability were tested with fluorescence microscopy, contact angle and X-ray photoelectron spectroscopy (XPS), showing an effective functionalization of substrates stable for over 20 days. By exploiting the strong biotin-streptavidin interaction or the thiol-maleimide coupling, DNA and PNA probes were displayed successfully on the surface of the materials, and these probes maintained the capability to specifically recognize complementary DNA sequences from solution. The printing of three different PNA-thiol probe molecules in a microarray fashion allowed selective DNA detection from a mixture of DNA analytes, demonstrating that the modified PLL methodology can potentially be used for multiplexed detection of DNA sequences., Competing Interests: The authors declare no competing financial interest., (Copyright © 2019 American Chemical Society.)

Biomolecules are immobilized onto surfaces employing the fast and stable adsorption of poly-l-lysine (PLL) polymers and the versatile copper-free click chemistry reactions. This method provides the combined advantages of versatile surface adsorption with density control using polyelectrolytes and of the covalent and orthogonal immobilization of biomolecules with higher reaction rates and improved yields of click chemistry. Using DNA attachment as a proof of concept, control over the DNA probe density and applicability in electrochemical detection are presented., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Quantification of the multivalent interactions of influenza viruses binding at interfaces may provide ways to tackle key biological questions regarding influenza virulence and zoonoses. Yet, the deconvolution of the contributions of molecular and interfacial parameters, such as valency, interaction area, and receptor density, to the binding of whole viruses is hindered by difficulties in the direct determination of these parameters. We report here a chemical platform technology to study the binding of multivalent recombinant hemagglutinin (rHA) nanoparticles at artificial sialoglycan cell receptor-presenting interfaces in which all these parameters can be derived, thus allowing the desired full and quantitative binding analysis. SiO 2 substrates were functionalized with supported lipid bilayers containing a targeted and tunable fraction of a biotinylated lipid, followed by the adsorption of streptavidin and biotinylated polyvalent 2,3- or 2,6-sialyl lactosamine (SLN). rHA nanoparticles were used as a virus mimic to provide a good prediction of the number of interactions involved in binding. Low nanomolar affinities and selectivities for binding at the 2,6-SLN platforms were observed for rHA particles from three different virus variants. When fitting the data to a multivalency model, the nanomolar overall affinity appears to be achieved by 6-9 HA-sugar molecular interaction pairs, which individually present a rapid association/dissociation behavior. This dynamic behavior may be an essential biological attribute in the functioning of the influenza virus.

We conducted a free-water mass balance-based study to address the rate of metabolism and net carbon exchange for the tidal wetland and estuarine portion of the coastal ocean and the uncertainties associated with this approach were assessed. We measured open water diurnal O 2 and dissolved inorganic carbon (DIC) dynamics seasonally in a salt marsh-estuary in Georgia, U.S.A. with a focus on the marsh-estuary linkage associated with tidal flooding. We observed that the overall estuarine system was a net source of CO 2 to the atmosphere and coastal ocean and a net sink for oceanic and atmospheric O 2 . Rates of metabolism were extremely high, with respiration (43 mol m -2 yr -1 ) greatly exceeding gross primary production (28 mol m -2 yr -1 ), such that the overall system was net heterotrophic. Metabolism measured with DIC were higher than with O 2 , which we attribute to high rates of anaerobic respiration and reduced sulfur storage in salt marsh sediments, and we assume substantial levels of anoxygenic photosynthesis. We found gas exchange from a flooded marsh is substantial, accounting for about 28% of total O 2 and CO 2 air-water exchange. A significant percentage of the overall estuarine aquatic metabolism is attributable to metabolism of marsh organisms during inundation. Our study suggests not rely on oceanographic stoichiometry to convert from O 2 to C based measurements when constructing C balances for the coastal ocean. We also suggest eddy covariance measurements of salt marsh net ecosystem exchange underestimate net ecosystem production as they do not account for lateral DIC exchange associated with marsh tidal inundation.

In 1979, Pulsed electromagnetic fields (PEMFs) were approved by the Food and Drug Administration as an effective method in the treatment of non-unions. As well as PEMFs, also static magnetic fields (SMFs) have been widely investigated in orthopaedic studies. Even if the exact mechanism of action is not well understood, a large number of studies showed specific effects both at cellular and tissue levels. As bone fracture healing and osseointegration share the same biological events, the application of magnetic field stimulation in order to facilitate the osseointegration process has been suggested. In this study we investigated BIC and newly formed bone volume around dental implants inserted in the tibia of New Zealand rabbits after SMF stimulation, generated by a small-customized cover-screw-shaped neodymium-iron-bore magnet placed in the inner cavity of dental implants. As a result, we found that the SMF field generated around dental implants enhanced bone healing in the animal model. Our findings represent, to our knowledge, the first ready clinical technique for dental implants showing the ability of SMF to promote the osteogenesis process in vivo.

Aim: To evaluate the growth of Human Gingival Fibroblasts (HGFs) cultured onto sample discs of CAD/CAM zirconia and veneering ceramic for zirconia by means of Scanning Electron Microscope (SEM) analysis at different experimental times., Methods: A total of 26 experimental discs, divided into 2 groups, were used: Group A) CAD/CAM zirconia (3Y-TZP) discs (n=13); Group B) veneering ceramic for zirconia discs (n=13). HGFs were obtained from human gingival biopsies, isolated and placed in culture plates. Subsequently, cells were seeded on experimental discs at 7,5×10(3)/cm(2) concentration and cultured for a total of 7 days. Discs were processed for SEM observation at 3h, 24h, 72h and 7 days., Results: In Group A, after 3h, HGFs were adherent to the surface and showed a flattened profile. The disc surface covered by HGFs resulted to be wider in Group A than in Group B samples. At SEM observation, after 24h and 72h, differences in cell attachment were slightly noticeable between the groups, with an evident flattening of HGFs on both surfaces. All differences between Group A and group B became less significant after 7 days of culture in vitro., Conclusions: SEM analysis of HGFs showed differences in terms of cell adhesion and proliferation, especially in the early hours of culture. Results showed a better adhesion and cell growth in Group A than in Group B, especially up to 72h in vitro. Differences decreased after 7 days, probably because of the rougher surface of CAD/CAM zirconia, promoting better cell adhesion, compared to the smoother surface of veneering ceramic.

Purpose: To use scanning electron microscopy (SEM) to evaluate capsulorhexis-cut quality obtained during femtosecond laser-assisted cataract surgery at different energy settings and evaluate whether there are differences between this technique and a standard manual technique., Setting: Ophthalmology Clinic, Department of Medicine and Science of Ageing, University G. D'Annunzio Chieti-Pescara, Chieti, Italy., Design: Prospective nonrandomized single blinded study., Methods: Sixty capsulorhexes obtained using the conventional manual technique and the femtosecond laser with different laser energy settings were divided into 5 groups as follows: Group 1 (12 capsulorhexes) obtained with the manual technique and Groups 2 to 5 (each with 12 capsulorhexes) obtained with the femtosecond laser at 7.0 μJ, 13.5 μJ, 14.0 μJ, and 15.0 μJ, respectively. All samples were evaluated using SEM to compare the thickness along the capsulorhexis edge and the overall irregularity of the cut surface., Results: Capsulorhexes obtained with the femtosecond laser at all energy settings were perfectly circular with negligible deformation. Group 1 and Group 2 had a significantly higher thickness and lower thickness, respectively, of the capsulorhexis edge than the other 3 groups (P<.001). There was also a statistically significant correlation between the degree of irregularity and increasing energy (P<.001)., Conclusions: The use of the femtosecond laser in cataract surgery resulted in better capsulorhexis geometry and circularity than the manual capsulorhexis. The cut surface was smoother in the manual group. In the femtosecond laser groups, the degree of irregularity was higher at increasing energy settings., Financial Disclosure: No author has a financial or proprietary interest in any material or method mentioned., (Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.)

The physiological behavior of Helicobacter pylori in different growth conditions was investigated to approach its growth standardization. H. pylori free-living and biofilm modes of growth were assessed in four different liquid culture media (Brucella broth, brain heart infusion broth and Ham's F-12 supplemented with 2% fetal calf serum and Ham's F-12 without serum). Free-living growth was monitored during 72 h in each medium and characterized for bacterial density, culturability, viability and morphology. The biofilm formation in the same media was evaluated for biomass production, colony forming unit (CFU) counts and microscopic visualization. Afterward, using Ham's F-12, the effect of amoxicillin and clarithromycin at sub- minimum inhibitory concentrations (sub-MICs) was evaluated on H. pylori biofilm formation and luxS gene expression. Differences in the free-living growth were observed between the media supplemented with serum and Ham's F-12 without serum. Biofilm formation was significantly dependent on the growth media used. Ham's F-12 seems to be a good medium to support both growth phenotypes of H. pylori. Moreover, sub-MICs of antibiotics increased the biofilm formation and affected the luxS gene expression. Optimizing the growth conditions of H. pylori, especially in the biofilm mode, will be helpful to perform more accurate in-depth studies that will allow increasing the knowledge about H. pylori biofilm, which should be a target to eradicate resistant infection., (© 2012 APMIS Published by John Wiley & Sons Ltd.)

The aim of the present research is an in vitro evaluation of the preload distribution in screw-retained implant systems under cyclic load. Two implant systems with internal connection were tested: fifteen 4.5 × 10 mm implants with internal hexagon and fifteen 4.5 × 10 mm implants with internal octagon. Samples underwent cyclic load that was between 20 N and 200 N for 1 × 10(6) cycles. After mechanical tests, samples were sectioned along the long axis and analyzed under a scanning electron microscope. Five 4.5 × 10 mm implants with internal hexagon and five 4.5 × 10 mm implants with internal octagon were collected for photoelastic analysis. Each fixture was mounted in a wax-made parallelepiped measuring 20 mm × 20 mm × 10 mm. A mold was made for each wax parallelepiped/fixture assembly using a silicone-based impression material, and an epoxy resin was poured in each mold. After setting of the resin, 25° angled titanium abutments were screwed onto each replica; afterwards, assemblies underwent photoelastic analysis. After cyclic load, screw threads and heads were still in contact with internal fixture threads and abutment holes, respectively, suggesting that preload has not been lost during load. During load, SSO and Xsigñ implants behave in a different way. SSO samples revealed the presence of fringes radiating from the base of the abutment. Xsigñ implants showed the presence of fringes radiating from the threads of the retention screw. From the present in vitro research, it is possible to state that screw-retained abutment based on an internal octagonal connection is less likely to come loose after cyclic load.

The Del Pozo and Patel (DPP) algorithm permits to identify suitable candidates for debridement and implant retention (DR) in prosthetic joint infections (PJI), but does not include gram-negative bacilli (GNB) as a risk factor of worst outcome. We conducted a retrospective study to validate the DPP algorithm and propose a simplified algorithm including GNB PJI. From 2002 to 2009, 73 PJI underwent surgery; 55% were chosen according to PDD algorithm. Non-adherence increased the risk of treatment failure (HR = 4.2). Performing DR in the presence of GNB PJI and performing DR in a joint prosthesis implanted for >3 months without hematogenous infection were independent risk factors. Our simplified algorithm, based on these 2 criteria, showed comparable performance to the DPP algorithm but increased eligibility for DR by a 2.4 fold., (Copyright © 2013 Elsevier Inc. All rights reserved.)

On May 31, 2010, a direct acoustic measurement method was used to quantify fluid leakage rate from the Deepwater Horizon Macondo well prior to removal of its broken riser. This method utilized an acoustic imaging sonar and acoustic Doppler sonar operating onboard a remotely operated vehicle for noncontact measurement of flow cross-section and velocity from the well's two leak sites. Over 2,500 sonar cross-sections and over 85,000 Doppler velocity measurements were recorded during the acquisition process. These data were then applied to turbulent jet and plume flow models to account for entrained water and calculate a combined hydrocarbon flow rate from the two leak sites at seafloor conditions. Based on the chemical composition of end-member samples collected from within the well, this bulk volumetric rate was then normalized to account for contributions from gases and condensates at initial leak source conditions. Results from this investigation indicate that on May 31, 2010, the well's oil flow rate was approximately 0.10 ± 0.017 m(3) s(-1) at seafloor conditions, or approximately 85 ± 15 kg s(-1) (7.4 ± 1.3 Gg d(-1)), equivalent to approximately 57,000 ± 9,800 barrels of oil per day at surface conditions. End-member chemical composition indicates that this oil release rate was accompanied by approximately an additional 24 ± 4.2 kg s(-1) (2.1 ± 0.37 Gg d(-1)) of natural gas (methane through pentanes), yielding a total hydrocarbon release rate of 110 ± 19 kg s(-1) (9.5 ± 1.6 Gg d(-1)).

The recently introduced ultrasonic osteotome procedure is an alternative to conventional rotatory burs. The aim of this study was to establish the differences between two ultrasonic osteotomes and conventional rotatory burs, in order to perform micromorphological and histological analyses of osteotomized bone surfaces. Bony samples were taken from adult bovine ribs including both the cortical and marrow bone. Soft tissues have been removed and the bone pieces were divided into four groups, to test four devices: a conventional osteotomy round bur, a Lindeman bur and piezoelectric osteotomes ES007 and the T-Black. Each device performed cuts that were examined via scanning electron microscope (SEM) and light microscopy (LM) to check respectively cut precision and bone architecture all along the defect borders. SEM analysis of specimens showed that burs created defects of greater width and with irregular edges while those produced by ultrasonic osteotomes were narrow and had mostly smooth cutting surfaces. The edges of incisions made by drills were full of bone fragments while less bone chips were observed on piezoincision’s ones. Dimensions of fragments were wider if cuts were made by burs too. LM analysis of samples showed focally, delicate bony trabecules crushed and pressed into the bone marrow in cutting made by burs. Samples cut by ultrasonic devices showed small or no smear layer and only partial or no crushed trabecules. Osteocytes seemed to be intact all along the cutting surface in all samples observed. In the present study, according to literature, ultrasonic surgery validity is confirmed. As a matter of fact, the greater the number of bone chips products, the greater the magnitude of the inflammatory process induced, as well as the possibility of a greater bone loss and delay in wound healing near the osteotomized area.

Acoustic methods are applied to the investigation and monitoring of a vigorous hydrothermal plume within the Main Endeavor vent field at the Endeavor segment of the Juan de Fuca Ridge. Forward propagation and scattering from suspended particulates using Rayleigh scattering theory is shown to be negligible (log-amplitude variance σ(χ) (2)~10(-7)) compared to turbulence induced by temperature fluctuations (σ(χ) (2)~0.1). The backscattering from turbulence is then quantified using the forward scattering derived turbulence level, which gives a volume backscattering strength of s(V)=6.5 × 10(-8) m(-1). The volume backscattering cross section from particulates can range from s(V)=3.3 × 10(-6) to 7.2 × 10(-10) m(-1) depending on the particle size. These results show that forward scatter acoustic methods in hydrothermal vent applications can be used to quantify turbulence and its effect on backscatter measurements, which can be a dominant factor depending on the particle size and its location within the plume., (© 2011 Acoustical Society of America)

Aim: The aim of this work is to analyze by scanning electron microscopy implant components that have mechanically failed in vivo., Materials and Methods: Three clinical cases are presented relative to single lateral posterior restorations supported by implants and a case of a mandibular overdenture supported by two implants. In all the reported cases the presence of an incongruous occlusal load caused the fracture of the components of the implant supported restorations., Conclusion: From the analysis of the cases examined in this study, it is deduced that the functional overload influences the biomechanical behavior of the prosthetic rehabilitation supported by an implant and may, in less fortunate cases, determine the failure following the fracture of the connecting screws and/or the fixture.

The aims of the present study were to clinically and histologically evaluate human fresh frozen bone (FFB) grafts used to treat severe maxillary horizontal defects prior to dental implant placement. Ten patients were treated with FFB onlay grafts. Measurements using computed tomography scans were recorded preoperatively and at 5 months. Six core biopsies were retrieved and processed for light microscopy. At baseline, thickness of the maxillary alveolar ridge measured 2.3 ± 0.4 mm; it measured 6.8 ± 0.5 mm after reconstruction. All implants were successful after 24 months. Histologic results showed that FFB blocks and new bone were integrated perfectly. Histomorphometry revealed a mean percentage of bone of 57.5% ± 24.7%.