Search

The low-velocity impact and compression after the impact of the composite stiffened panels were carried out after damp-heat aging. The experimental results show that reinforcing the ribs can enhance the impact resistance of test pieces after damp-heat aging. After impacting, the specimens were tested in an axial compression. The results show that the ultimate bearing capacity of the specimen is also affected by different located positions of the impact and different aging times. Compared with the intact specimen, the ultimate load-bearing capacity was reduced to 16.83, 12.10, and 17.10% with the specimen aging for 0, 45, and 90 days, respectively, while the impact position located at the intersection of longitudinal and transverse bars has the greatest influence on the damp-heat aging of specimens.

Resin matrix composites (RCs) have better thermal and chemical stability, so they are widely used in engineering fields. In this study, the aging process and mechanism of two different types of resin-based three-dimensional four-way braided composites (H15 and S15) under different hygrothermal aging conditions were studied. The effect of aging behavior on the mechanical properties of RCs was also studied. Three different aging conditions were studied: Case I, 40 °C Soak; Case II, 70 °C Soak; and Case III, 70 °C-85% relative humidity (RH). It was found that the hygroscopic behavior of RCs in the process of moisture-heat aging conforms to Fick's second law. Higher temperatures and humidity lead to higher water absorption. The equilibrium hygroscopic content of H15 was 1.46% (Case II), and that of S15 was 2.51% (Case II). FT-IR revealed the different hygroscopic mechanisms of H15 and S15 in terms of aging behavior. On the whole, the infiltration behavior of water molecules is mainly exhibited in the process of wet and thermal aging. At the same time, the effect of the aging process on resin matrices was observed using SEM. It was found that the aging process led to the formation of microchannels on the substrate surface of S15, and the formation of these channels was the main reason for the better moisture absorption and lower mechanical strength of S15. At the same time, this study further found that temperature and oxygen content are the core influences on post-aging strength. The LVI experiment also showed that the structural changes and deterioration effects occurring after aging reduced the strength of the studied material. [ABSTRACT FROM AUTHOR]

• Embryonic callus induction is the key of somatic embryogenesis in A. praecox. • Plant hormone signals trigger somatic cell reprogramming. • Lower and moderate levels of stress are beneficial for the acquisition of embryonic ability. • Starch and sucrose metabolism play fundamental and important roles in the acquisition of embryonic ability. Somatic embryogenesis (SE) is an ideal cell model for plant cell totipotency study. The poor frequency of embryogenic callus (EC) induction limits the application of SE in many plants, such as Agapanthus praecox. Herein, we performed transcriptomic and physiological analyses with different callus (Ca) differentiation directions (SE and organogenesis) and stages (initial SE and repetitive SE) to better understand the physiological and molecular characteristics of the acquisition of embryogenic potential in A. praecox. A number of differentially expressed genes (DEGs) were significantly related to plant hormonal signaling transduction, starch and sucrose metabolism, and reactive oxygen species (ROS) responses. Compared to Ca, DEGs including heat shock protein, isoamylase, histone H4, alpha-1,2-mannosyltransferase , and sucrose synthase substantially changed expression levels in EC formation. Corresponding to DEGs, physiological indicators including indole-3-acetic acid, cytokinins, brassinosteroids, ethylene, abscisic acid, ROS, hydrogen peroxide, superoxide dismutase, catalase, starch and sucrose may be responsible for the acquisition of embryogenic potential in A. praecox. Moreover, plant growth regulators, carbon source combination, osmotic regulating substance, and DNA methylation inhibitors in the culture medium significantly affected the acquisition of SE potential. Altogether, our results suggested that plant hormone signal regulation, starch and sucrose metabolism, ROS scavenging, chromatin accessibility and DNA methylation jointly contributed to the activation of embryogenic ability in A. praecox. [ABSTRACT FROM AUTHOR]

Three-dimensional braided composites (3D-BCs) have better specific strength and stiffness than two-dimensional planar composites (2D-PCs), so they are widely used in modern industrial fields. In this paper, two kinds of 3D four-directional braided composites (3D4d-BCs) with different braided angles (15°, denoted as H15, and 30°, denoted as H30) were subjected to hydrothermal aging treatments, low-velocity impact (LVI) tests, and compression after impact (CAI) tests under different conditions. This study systematically studied the hygroscopic behavior and the effect of hygrothermal aging on the mechanical properties of 3D4d-BC. The results show that higher temperatures and smaller weaving angles can significantly improve the moisture absorption equilibrium content. When the moisture absorption content is balanced, the energy absorption effect of 3D4d-BC is better, but the integrity and residual compression rate will be reduced. Due to the intervention of oxygen molecules, the interface properties between the matrix and the composite material will be reduced, so the compressive strength will be further reduced. In the LVI test, the peak impact load of H15 is low. In CAI tests, the failure of H15 mainly occurs on the side, and the failure form is buckling failure. The main failure direction of H30 is 45° shear failure.

Acalypha hispida Burm. f. (1768) is an evergreen shrub native to New Guinea and the Bismarck Archipelago. Currently, it is widely cultivated as an ornamental and medicinal plant in tropical and subtropical areas worldwide. This study characterized the complete chloroplast genome of A. hispida , which is 172,122 bp in length and consists of large single-copy (LSC) and small single-copy (SSC) regions of 97,025 bp and 19,787 bp, respectively, that are separated by a pair of 27,655 bp inverted repeat (IR) regions. The overall GC content of the genome is 34.22%. The genome contains 131 genes, including 86 protein-coding, 37 tRNA, and eight rRNA genes. Phylogenetic analysis indicates that A. hispida is closely related to Ricinus communis and Cleidiocarpon cavaleriei in the Euphorbiaceae family. The complete chloroplast genome of A. hispida provides genomic resources and potential markers suitable for future species identification and speciation studies of the genus Acalypheae and will also provide important information on the phylogenetic relationships of the Euphorbiaceae family., Competing Interests: No potential conflict of interest was reported by the author(s)., (© 2023 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)