Search

Phase change materials (PCM) are promising technology to store thermal energy at a constant temperature. A large amount of energy can be stored or released in latent heat form during the transition of material from one phase to another. Despite the great benefits, most PCMs have their own limitations i.e., low phase change enthalpy, poor specific heat and thermal conductivity, supercooling, volume change, phase segregation, etc. Consequently, efficient thermal energy storage requires improving the thermophysical properties of PCMs. The present study is a comprehensive review of existing techniques for PCMs thermophysical properties enhancement. The research progresses on adding zero, one, two, and three-dimensionally structured additives to PCM is assessed to improve the thermal transport by enhancing the PCM effective thermal conductivity. The enhancement of latent heat of fusion and specific heat using various additives is also discussed. Further, the latest techniques on supercooling and phase segregation reduction are also presented. Last, the modelling of the novel composite materials formed by combining a PCM with other materials is presented. Despite the fact that the majority of these methods are still in the research and development stage, some of them have the potential to be commercialized in the near future. Reliable and efficient PCMs are exceptionally useful for storing solar energy and industrial waste heat, especially for constant temperature applications.

International audience

Net-zero energy buildings (NZEBs) have been considered as an efficient solution to limit the growing energy consumption and pollution emissions from buildings. The configurations and the capacities of the implemented renewable energy systems in NZEBs should be wisely selected to ensure the intended performance objective. This study aims to optimize, investigate and compare six renewable energy solution sets for designing NZEBs in three different climates: Indore (cooling dominant), Tromso (heating dominant), and Beijing (mixed climate). The optimization is carried out using a multi-criteria decision-making methodology. The implemented methodology is composed of two phases. In the first phase, the optimal sizes of solution sets in each climate are derived and analyzed. The effectiveness of optimal solution sets is evaluated with respect to economy, environment, energy and grid stress. In the second phase, recommendations for each region are offered according to the overall performance evaluation results. The evaluation criteria include life cycle cost, payback period, levelized cost of energy, CO2eq emissions, grid interaction index, load matching index, and total energy consumption. The analyses show that, in Indore (hot climate), it is recommended to utilize the solution set composed of air source heat pump for cooling and flat plate solar collectors for domestic hot water (DHW) production. In Tromso (cold climate), the use of a biodiesel generator is promising to produce both electricity and hot steam for heating as well as DHW use. In Beijing (mixed climate), it is recommended to utilize electric chillers for cooling and natural gas condensing boiler for heating and DHW usage.

International audience; This paper investigates the thermal performance of a translucent solar wall providing, concurrently, storage and restitution of heat, super thermal-acoustic insulation and daylighting to the interior environment. The wall is composed of glazing, silica aerogel used as a transparent insulation material (TIM) and glass bricks filled with fatty acid, an eutectic phase change material (PCM). To assess the TIM–PCM wall thermal behavior, experimentations were conducted in-situ in a full-sized test cell located in Sophia Antipolis, southern France. Experimental data shows that the tested wall is more effective in winter and might cause overheating during the summer mainly due to solar gains and un-cycling behavior of PCM which remains in liquid state. To enhance the energy performance of the wall in summertime, a numerical model describing the heat transfer mechanisms occurring in the PCM layer in combination with the other transparent wall layers is developed. Then, the model of the wall is linked to TRNSYS software to assess the thermal performance of the whole building. The numerical model is validated experimentally and a good agreement is shown comparing the simulated values with the measured data for seven consecutive days in summer and winter. The importance of considering the natural convection effect in the liquid PCM is also demonstrated. Moreover, it was shown that shading devices can effectively reduce overheating while natural night ventilation decreases the indoor temperature without affecting the PCM performance since the outdoor temperature is always higher than the phase change temperature. The use of a glass with selective solar reflection properties depending on the season instead of the ordinary glazing is shown also to be very effective way to overcome the overheating problem. Finally, the TIM-PCM wall is tested under different climate conditions and passive solutions are given to ensure thermal comfort in summer season.

International audience; In this article, a simplified model for melting of a phase change material (PCM) in presence of natural convection and radiation is presented. A modified enthalpy method is adopted to solve the phase change problem, the natural convection occurring in the liquid PCM is accounted for using the enhanced thermal conductivity approach coupled with the scaling theory, and the absorbed shortwave radiation flux is added into the energy equation as a source term using a simplified solution algorithm. Two dimensional implicit finite volume method is used to solve the energy equation. First, the simplified model for melting with natural convection is validated using a CFD model, in addition to experimental and numerical benchmark solutions for a test case. Then, the simplified model for melting with combined natural convection and radiation is applied to the melting of a fatty acid eutectic filled in glass bricks, which will be used later to model the annual thermal behavior of a special translucent façade. This complete model is validated against the lattice Boltzmann-discrete ordinate method LBM-DOM. It was shown that (1) the proposed simplified model is simple to implement and its simulations run significantly faster than those of CFD models and LBM-DOM model. Consequently, it can be easily integrated into an energy simulation tool for yearly performance evaluation, (2) during PCM melting process, natural convection has a noteworthy role as it enhances the average fraction of liquid and the position of the melting front, (3) shortwave radiation enhances the average liquid fraction.

International audience; The conception of net zero energy buildings (NZEB) has been introduced to limit energy consumption and pollution emissions in buildings. Classification of NZEB is based on renewable energy (RE) supply options, energy measurement process, RE-sources location, and balances whether are energetic or exergetic. In general, it is traditionally agreed that there are three main steps to reach the NZEB performance, starting through the use of passive strategies, energy efficient technologies, and then RE generation systems. Then, these three steps could be accompanied with the smart integration of advanced efficient energy technologies. A state of the art shows that the main ZEB studies are related to: energy savings, reduce electric bills, energy independence, pollution reduction, and occupants comfort, in addition, others are more interested in the aesthetic aspect by combining modern technologies with innovations to achieve high energy and sustainability performance. Building optimization is a promising technique to evaluate NZEB design choices; it has been adopted to choose the perfect solution to reach the zero energy performance through the optimization of an objective function related to energy (thermal loads, RE generation, energy savings) and/or environment (CO2 emissions) and/or economy (life-cycle cost (LCC), net-present value (NPV), investment cost). This paper starts by presenting the global energetic and pollution challenges the world faces. Moreover, it shows, to the best to the author’s knowledge, the existing NZEB definitions and the corresponding case studies investigated in 8 different climatic zones (humid continental, humid subtropical, Mediterranean, moderate continental, moderate continental, marine west coast, tropical, semi-arid and hot), the paper also focus on the importance to treat each climate separately. Even in the same country, two or more climates may co-exist. NZEBs drawbacks are also presented. Furthermore, different optimization problems are reviewed in the last section. Building energy optimization methods are employed to obtain the ideal solution for specific objective functions which are either related to energy, and/or environment and/or economy. Optimization variables are distributed between passive and/or RE generation systems. Finally, a table summarizing the most commonly used electric and thermal RE applications which yield to the zero energy balance in each climate, as well as three flowcharts are presented to summarize the whole three-stage procedure, to reach NZEB, starting from building designing, passing through the optimization procedure, and lastly categorizing the zero energy balance.

International audience; Enhancing efficiency, meeting environmental standards, and preserving fuel resources are highly important objectives in power generation systems, at a time where world is endangered by several energetic, environmental, and health crises. Thus, better designs are constantly sought to increase the performance of such systems. In this study, an environment friendly trigeneration system based on solid oxide fuel cell (SOFC) is selected and designed for domestic applications. Negligible emissions are thus recorded as the SOFC is fueled solely by hydrogen. The system is modeled following three steps: the energy simulation of residential building to determine its demands, the system’s prime mover–SOFC, and the trigeneration recovery system ensuring the maximum coverage of heating, cooling, and domestic hot water loads respectively. The system is then evaluated under the 4-E assessment criteria: energy, exergy, economy, and environment. Depending on these criteria, the system is multi-objectively optimized. Two operation strategies are adopted: off-grid following electrical load and on-grid base load operations. Optimization results show that the trigeneration system is energetically and economically superior and performs well under both strategies. The maximum energy and exergy efficiencies (65.2% and 45.77%) and minimum system cost rate (22.2 cents/kWh) are obtained under on-grid base load operation.

International audience; The challenge in Zero energy building (ZEB) design is to find the best combination of design strategies that would face the energy performance problems of a particular building. This paper outlines the methodology and the cost-effectiveness potential for optimizing the design of net-zero energy building (NZEB) in a cold climate region in Lebanon; Cedars. Specifically, the non-sorting genetic algorithm (NSGA-II) is chosen in order to minimize thermal, electrical demands and life cycle cost (LCC) while reaching the net zero energy balance; and thus getting the Pareto-front. A ranking decision making technique (ELECTRE III) is applied to the Pareto-front so as to obtain one optimal solution. A wide range of energy efficiency measures are investigated, besides solar energy systems are employed to produce required electricity and hot water for domestic purposes. The results clearly indicate that, for designing a residential NZEB in cold climate, it is essential to minimize the space thermal load through a building envelope with high thermal performance. Envelop high level of insulation is an essential step to decrease the high heating demand. Building thermal loads are decreased by 33.19%. Moreover the LCC is decreased by 31.09%.

International audience; Energy demands and fuel costs are continuously increasing which necessitates either finding new energy resources or improving current energy systems. Multi-generation systems as cogeneration (CHP) and trigeneration (CCHP) are interesting solutions that can enhance energy generation performance and fix some interrelated reliability, safety, and flexibility issues. In this regard, many prime mover technologies are available in which the choice between each is greatly dependent on end-user conditions and preferences. Yet, it is prior to choose whether cogeneration or trigeneration is more suitable. Thus, this paper reviews the main differences between CHP and CCHP systems in most available prime mover technologies, after which a selection table is proposed in order to make appropriate multi-generation system installation choices, depending on specific case study parameters. In general, CHP and CCHP systems yield positive technical and environmental performance impacts.

The hybrid cooling system has proved to be an energy saving technology for building air conditioning. Numerous systems combining different cooling processes or cooling machines have been proposed and investigated in the literature. A properly selected hybrid cooling system offers a great reduction in energy consumption and a coefficient of performance improvement varying according to different climates and system designs. This paper provides a detailed review of existing hybrid cooling systems with their corresponding individual cooling machines. A brief state of the art of the most common individual cooling systems in hybrid cooling for building use is firstly presented. Then, the hybrid cooling systems are classified into five main categories according to the combination of cooling processes or machines: Vapor compression based cooling, absorption based cooling, adsorption based cooling, desiccant-evaporative and multi-evaporator cooling. In each category, the studied configurations and the benefits of each hybridization method are presented. It is found that each hybrid system combines the advantages of the different cooling processes used. However, a hybrid system could have a negative repercussion if it does not match the climatic zone where it will be used. Consequently, a selection scheme to recommend the best hybrid cooling system for minimum energy consumption and pollution emissions in buildings according to different parameters is proposed.

International audience; Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification diagram of the main CHP/CCHP system components is summarized. A general selection approach of the appropriate CCHP system according to specific needs is finally suggested. In almost all reviewed works, CCHP systems are found to have positive technical and performance impacts.

International audience; This paper presents the dynamic modeling of a domestic hybrid water heating system. The system is composed of a solar collector, a heat pump water heater, a wind turbine, a battery and a hot water storage tank. Both air-source and geothermal-heat pumps are investigated. Detailed mathematical dynamic models of the individual components are presented and validated. Simulations for typical days in summer and winter for Beirut and Cedars, two Lebanese locations with different meteorological and demographic conditions, are conducted using Matlab software. A renewable coverage factor (RCF) is defined, representing the renewable energy share with respect to the total delivered energy. Results reveal that the proposed hybrid system is capable of securing all hot water needs in all case studies and RCF is always above 63%. Furthermore, an energetic, economic optimal management model is developed for the proposed hybrid system. It is applied to the considered case studies, where results illustrate the optimum size of each of the system components as well as the optimum energy-flow distributions among them over two investigated time periods, five and ten years. It is noticed that the initial cost of the hybrid system is acceptable and important annual savings are obtained.

International audience; Water heating contributes an important proportion of residential energy consumption all around the world. Different kinds of domestic hot-water production systems exist. The operational cost, environmental effect and performance of these systems differ according to various energy sources, climates, system types and system designs. Hence, the proper choice of a domestic hot-water system could save energy, protect nature and reduce operational costs, significantly. This paper illustrates, to the best of the author's knowledge, the existing water-heating systems all along with the principle, advantages, disadvantages and state-of-the-art for each. Six different categories were presented, namely wood, oil/gas, electric, heat pump, solar and instantaneous systems. The heat-pump systems were further classified into several groups, namely air source, ground source, solar assisted, ground source-solar assisted, photovoltaic–thermal and gas-engine driven systems. In addition, concerning solar water heating, different types of systems and collectors were presented and reviewed. Principal conclusions from the review are outlined and a general approach to recommend the appropriate water-heating system is proposed.

International audience; This paper presents a dynamic simulation model to predict the performance of an ASHPWH (air source heat pump water heater). The developed model is used to assess its performance in the Lebanese context. It is shown that for the four Lebanese climatic zones, the expected monthly values of the average COP (coefficient of performance) varies from 2.9 to 5, leading to high efficiencies compared with conventional electric water heaters. The energy savings and GHG (greenhouse gas) emissions reduction are investigated for each zone. Furthermore, it is recommended to use the ASHPWH during the period of highest daily ambient temperatures (noon or afternoon), assuming that the electricity tariff and hot water loads are constant. In addition, an optimal management model for the ASHPWH is developed and applied for a typical winter day of Beirut. Moreover, the developed dynamic model of ASHPWH is used to compare the performance of three similar systems that differ only with the condenser geometry, where results show that using mini-condenser geometries increase the COP (coefficient of performance) and consequently, more energy is saved as well as more GHG emissions are reduced. In addition, the condenser “surface compactness” is increased giving rise to an efficient compact heat exchanger.

International audience; This paper presents a brief review of the conventional and renewable energy statuses, in Lebanon, as well as of the principal problems facing the electricity of Lebanon Company (EDL). In addition, an analytical-critical review of the latest three official Lebanese electricity plans is presented. Furthermore, two future electricity generation plan-scenarios for Lebanon are investigated, where multi variables are examined, namely: cost, environment and tariff. First, an economical-environmental optimization is carried out, where two reasonable scenarios are introduced based on the fuel source of CCGT power plants. Results revealed that the investment in wind energy and natural gas for power production should be a main concern in the future. Second, an optimization of the average electricity tariff for each of the two investigated generation scenarios is studied, where three different approaches are illustrated. Results confirm that all tariff plans are acceptable and convincing, and that the use of natural gas in CCGT plants is always preferred against gasoil. Moreover, the optimized average tariff is maximally a double of the current EDL average tariff, which is very convincing compared with the actual cost of electricity for the current Lebanese electricity sector.

It is seen that 2.5D interlocks are particular reinforcements for high advanced applications (i.e., spatial and aeronautics fields) that are believed to have a high structural potential. This kind of reinforcement entails to consider the composite as a structure because interlocks are built by crossing the warp yarns with the weft (or fill) yarns in the three directions. In this article, a new numerical and analytical model is proposed. To evaluate the mechanical behavior, one may obtain numerically, the anisotropic elastic engineering constants from a finite element model (FEM). This technique of virtual testing consists of modeling the composite at the meso-scale to obtain a macro-scale response with a stress—strain analysis. At the moment, numerical simulations of such materials mainly involve geometrical models and automated tetrahedral meshes that make it difficult to cope with the orthotropic behavior of yarns materials. We thus propose a new meshing methodology to build an elementary volume made of tetrahedra for the isotropic matrix and of mapped hexaedra for the transversely isotropic yarns in order to achieve the FE discretization. A new analytical model is also been proposed, based on a geometrical modeling of the yarns using sinusoidal function and on homogenization at the macrolevel based on both iso-strain and iso-stress assumptions. This model allows the estimation of stiffness matrix of the composite in terms of the properties of its constituents and the geometry of the fabric. Two 2.5D interlock composites from the ‘layer—layer’ family are studied where the nine engineering constants are evaluated. The FEM and the analytical model show a good agreement with each other and with available in-plane Young’s modulus and Poisson’s ratio experimental results.

This paper reports an experimental study on nanofluid convective boiling heat transfer in parallel rectangular minichannels of 800 μm hydraulic diameter. Experiments are conducted with pure water and silver nanoparticles suspended in water base fluid. Two small volume fractions of silver nanoparticles suspended in water are tested: 0.000237% and 0.000475%. The experimental results show that the local heat transfer coefficient, local heat flux, and local wall temperature are affected by silver nanoparticle concentration in water base fluid. In addition, different correlations established for boiling flow heat transfer in minichannels or macrochannels are evaluated. It is found that the correlation of Kandlikar and Balasubramanian is the closest to the water boiling heat transfer results. The boiling local heat transfer enhancement by adding silver nanoparticles in base fluid is not uniform along the channel flow. Better performances and highest effect of nanoparticle concentration on the heat transfer are obtained at the minichannels entrance.

International audience; This paper presents a detailed review of EDL (Electricité du Liban). It displays the institution's technical problems at the level of electricity generation, transmission and distribution as well as the administrative and financial states and suggests several recommendations. It is obvious that EDL suffers a great shortage in its generating capacity and human resources and would not be effective without conducting a national strategy that includes radical solutions.

This thesis aims to study the exploitation of solar radiation thanks to a new concept of passive sensor wall. In this context, the thermal behavior of a novel semi-transparent solar wall has been studied. The wall is composed of glazing, silica aerogel (TIM) and glass bricks filled with fatty acids (PCM). This wall provides storage and restitution of heat, thermal-acoustic insulation and daylighting. The thermal performance of the TIM-PCM wall is tested in a full-sized test cell located in Sophia, PERSEE center. In winter, particularly in sunny cold days, the PCM absorbs solar radiation, melts, and then releases the stored heat to the building at night. During summer, overheating is encountered, the PCM remains in its liquid state and is unable to release the stored heat. A simplified model for PCM melting in presence of natural convection and radiation is developed and validated using a CFD model, and benchmark solutions. Then, a numerical model describing the heat transfer mechanisms through the wall is developed. This model is linked to TRNSYS to assess the thermal performance of the whole building. The MATLAB-TRNSYS model is then validated experimentally. The thermal behavior of the wall is tested under different climates, and passive solutions are proposed to ensure thermal comfort in summer. Finally, the validated model is used to study the annual thermal behavior of a building integrating TIM-PCM wall and an economic study is conducted. These studies confirm the interest of the wall vis-à-vis the improvement of energy performance of the building. The economic feasibility of applying the TIM-PCM wall depends mainly on climate, energy costs, and investment cost.; Cette thèse vise à étudier l'exploitation du rayonnement solaire grâce à un nouveau concept de mur capteur passif. Dans ce contexte, le comportement thermique d’un mur solaire semi-transparent a été étudié. Le mur fournit un éclairage naturel et est composé d’une couche d’aérogel de silice assurant une isolation thermique et acoustique, et d’un MCP. Ce dernier est contenu dans des briques de verre assurant l’absorption, le stockage et la restitution de chaleur. Ce mur a été caractérisé expérimentalement au centre PERSEE à Sophia. Il a été remarqué que la performance thermique du mur est élevée en hiver, tandis qu’une surchauffe estivale a été rencontrée. Un modèle numérique simplifié a été développé pour modéliser la convection naturelle et le rayonnement pendant la fusion du MCP. Ce modèle est validé à l’aide d’un modèle CFD, et des résultats de Benchmark. Pour optimiser la performance du mur en été, un modèle numérique du transfert de chaleur à travers le mur a été développé sous MATLAB. Ce modèle a été couplé à TRNSYS afin d’évaluer la performance thermique de l'ensemble du bâtiment. Le modèle couplé a été validé expérimentalement. Le comportement thermique du mur est testé dans des différents climats, et des solutions passives sont proposées pour assurer le confort thermique. Enfin, ce modèle a permis d'étudier le comportement thermique annuel d’un bâtiment intégrant un mur MCP- aérogel dans son enveloppe et une étude économique a été réalisée. Ces études ont confirmé l'intérêt du mur vis-à-vis de l'amélioration des performances énergétiques du bâtiment. La faisabilité économique de l'application du mur dépend du climat, du coût d’énergie, et du coût d'investissement.

This thesis aims to study the exploitation of solar radiation thanks to a new concept of passive sensor wall. In this context, the thermal behavior of a novel semi-transparent solar wall has been studied. The wall is composed of glazing, silica aerogel (TIM) and glass bricks filled with fatty acids (PCM). This wall provides storage and restitution of heat, thermal-acoustic insulation and daylighting. The thermal performance of the TIM-PCM wall is tested in a full-sized test cell located in Sophia, PERSEE center. In winter, particularly in sunny cold days, the PCM absorbs solar radiation, melts, and then releases the stored heat to the building at night. During summer, overheating is encountered, the PCM remains in its liquid state and is unable to release the stored heat. A simplified model for PCM melting in presence of natural convection and radiation is developed and validated using a CFD model, and benchmark solutions. Then, a numerical model describing the heat transfer mechanisms through the wall is developed. This model is linked to TRNSYS to assess the thermal performance of the whole building. The MATLAB-TRNSYS model is then validated experimentally. The thermal behavior of the wall is tested under different climates, and passive solutions are proposed to ensure thermal comfort in summer. Finally, the validated model is used to study the annual thermal behavior of a building integrating TIM-PCM wall and an economic study is conducted. These studies confirm the interest of the wall vis-à-vis the improvement of energy performance of the building. The economic feasibility of applying the TIM-PCM wall depends mainly on climate, energy costs, and investment cost.; Cette thèse vise à étudier l'exploitation du rayonnement solaire grâce à un nouveau concept de mur capteur passif. Dans ce contexte, le comportement thermique d’un mur solaire semi-transparent a été étudié. Le mur fournit un éclairage naturel et est composé d’une couche d’aérogel de silice assurant une isolation thermique et acoustique, et d’un MCP. Ce dernier est contenu dans des briques de verre assurant l’absorption, le stockage et la restitution de chaleur. Ce mur a été caractérisé expérimentalement au centre PERSEE à Sophia. Il a été remarqué que la performance thermique du mur est élevée en hiver, tandis qu’une surchauffe estivale a été rencontrée. Un modèle numérique simplifié a été développé pour modéliser la convection naturelle et le rayonnement pendant la fusion du MCP. Ce modèle est validé à l’aide d’un modèle CFD, et des résultats de Benchmark. Pour optimiser la performance du mur en été, un modèle numérique du transfert de chaleur à travers le mur a été développé sous MATLAB. Ce modèle a été couplé à TRNSYS afin d’évaluer la performance thermique de l'ensemble du bâtiment. Le modèle couplé a été validé expérimentalement. Le comportement thermique du mur est testé dans des différents climats, et des solutions passives sont proposées pour assurer le confort thermique. Enfin, ce modèle a permis d'étudier le comportement thermique annuel d’un bâtiment intégrant un mur MCP- aérogel dans son enveloppe et une étude économique a été réalisée. Ces études ont confirmé l'intérêt du mur vis-à-vis de l'amélioration des performances énergétiques du bâtiment. La faisabilité économique de l'application du mur dépend du climat, du coût d’énergie, et du coût d'investissement.

The conception of net zero energy buildings (NZEB) has been introduced to limit energy consumption, global warming potentials, and pollution emissions in buildings. The challenge in NZEB design is to find the best combination of design strategies that will enhance the energy performance of a particular building. The aim of this thesis is to develop an understanding of NZEBs design concepts. Besides, it aims to assist NZEB designers to select the suitable design options of passive and RE systems based on a systemic evaluation in different climates. This thesis presents a methodology for the simulation-based multi-criteria optimization of NZEBs. The methodology is applied to investigate the cost-effectiveness potential for optimizing the design of NZEBs in different case studies taken as diverse climatic zones. The proposed methodology is a useful tool to enhance NZEBs design and to facilitate decision making in early phases of building design. A comprehensive study on optimal passive design for residential buildings is presented. The occupants’ adaptive thermal comfort is also improved by implementing the appropriate passive cooling strategies such as blinds and natural ventilation. The configurations and capacities of the implemented RE systems in NZEBs must be appropriately selected to ensure the intended performance objective. In the thesis, investigation, optimization and comparison of six RE solution sets for designing NZEBs is carried out in three typical climates: Indore (cooling dominant), Tromso (heating dominant) and Beijing (mixed climate).; La conception des bâtiments à consommation énergétique nette zéro (BCENN) a été introduite pour limiter la consommation d'énergie et les émissions polluantes dans les bâtiments. Le défi dans la conception de BCENN est de trouver la meilleure combinaison de stratégies de conception qui feront face aux problèmes de performance énergétique d'un bâtiment particulier. Cette thèse présente une méthodologie pour l'optimisation multicritères basée sur la simulation des BCENN. La méthodologie proposée est un outil utile pour améliorer la conception des BCENN et faciliter la prise de décision dans les premières phases de la conception des bâtiments. L’amélioration des bâtiments en matière d'efficacité énergétique nécessite une optimisation des paramètres passifs. Une étude complète sur la conception passive optimale pour les bâtiments résidentiels est présentée. Le confort thermique adaptatif des occupants est également amélioré en mettant en œuvre les stratégies de refroidissement passif appropriées telles que les dispositifs d’occultation et la ventilation naturelle. Les caractéristiques des systèmes de conditionnement de l’air et de production d’énergie mis en œuvre dans les BCENN doivent être sélectionnées avec soin pour garantir l'objectif de performance prévu. Dans cette thèse, six ensembles de systèmes énergétiques sont comparés et optimisés, pour la conception de BCENN dans des climats représentatifs choisis, à savoir Indore (besoin de froid dominant), Tromso (besoin de chaud dominant) et Beijing (climat mixte).

The conception of net zero energy buildings (NZEB) has been introduced to limit energy consumption, global warming potentials, and pollution emissions in buildings. The challenge in NZEB design is to find the best combination of design strategies that will enhance the energy performance of a particular building. The aim of this thesis is to develop an understanding of NZEBs design concepts. Besides, it aims to assist NZEB designers to select the suitable design options of passive and RE systems based on a systemic evaluation in different climates. This thesis presents a methodology for the simulation-based multi-criteria optimization of NZEBs. The methodology is applied to investigate the cost-effectiveness potential for optimizing the design of NZEBs in different case studies taken as diverse climatic zones. The proposed methodology is a useful tool to enhance NZEBs design and to facilitate decision making in early phases of building design. A comprehensive study on optimal passive design for residential buildings is presented. The occupants’ adaptive thermal comfort is also improved by implementing the appropriate passive cooling strategies such as blinds and natural ventilation. The configurations and capacities of the implemented RE systems in NZEBs must be appropriately selected to ensure the intended performance objective. In the thesis, investigation, optimization and comparison of six RE solution sets for designing NZEBs is carried out in three typical climates: Indore (cooling dominant), Tromso (heating dominant) and Beijing (mixed climate).; La conception des bâtiments à consommation énergétique nette zéro (BCENN) a été introduite pour limiter la consommation d'énergie et les émissions polluantes dans les bâtiments. Le défi dans la conception de BCENN est de trouver la meilleure combinaison de stratégies de conception qui feront face aux problèmes de performance énergétique d'un bâtiment particulier. Cette thèse présente une méthodologie pour l'optimisation multicritères basée sur la simulation des BCENN. La méthodologie proposée est un outil utile pour améliorer la conception des BCENN et faciliter la prise de décision dans les premières phases de la conception des bâtiments. L’amélioration des bâtiments en matière d'efficacité énergétique nécessite une optimisation des paramètres passifs. Une étude complète sur la conception passive optimale pour les bâtiments résidentiels est présentée. Le confort thermique adaptatif des occupants est également amélioré en mettant en œuvre les stratégies de refroidissement passif appropriées telles que les dispositifs d’occultation et la ventilation naturelle. Les caractéristiques des systèmes de conditionnement de l’air et de production d’énergie mis en œuvre dans les BCENN doivent être sélectionnées avec soin pour garantir l'objectif de performance prévu. Dans cette thèse, six ensembles de systèmes énergétiques sont comparés et optimisés, pour la conception de BCENN dans des climats représentatifs choisis, à savoir Indore (besoin de froid dominant), Tromso (besoin de chaud dominant) et Beijing (climat mixte).