Search

A long-lasting biomass burning event affected Europe from 27 August to 3 September 2018. The biomass burning aerosol layers were observed with ground- and space-based lidars in heights ranged between 2-7 km (a.s.l.). The mean backscatter coefficient for the ground-based stations ranged between 0.29 and 1.51 Mm-1sr-1, while the CALIPSO retrieved values ranged between 0.43 and 1.83 Mm-1sr-1. Moreover, the mean Ångström exponent (AEb) values, relevant to backscatter, ranged from 0.83 to 1.04 for the aforementioned lidar stations. At the same time, the mean AEb values obtained from CALIPSO ranged between 0.17 and 1.89. The mean particle depolarization ratio ranged between 0.037 and 0.080.

Three different aerosol classification methods have been used to characterize lidar observations: Mahalanobis distance automatic aerosol type classification, Neural Network Aerosol Typing Algorithm (NATALI) and Source and Analysis (SCAN) aerosol classification. The data selection has been made through the EARLINET database depending on the 3b+2a+1δ optical property availability. One hundred aerosol layers from four EARLINET stations (Bucharest, Kuopio, Leipzig and Potenza) have been classified. We present a typical case study of aerosol characterization observed by the MUSA system over Potenza on the 11th of April 2016 (20:30-21:30 UTC).

A cirrus cloud dataset from a groundbased lidar in a sub-arctic station is analyzed in terms of the particle depolarization ratio. The depolarization values -δ- showed a broad distribution, ranging between 0.25 and 0.7, with a mean value of 0.38 ± 0.07. This variability is examined in correlation with temperature dependencies and the cirrus optical depth. Depolarization values greater than 0.45 are observed from temperatures between -60oC and -40oC, where horizontally oriented planar ice crystals are to be expected. Two case studies are also, discussed and analyzed in terms of depolarization height dependence.

In order to document and study airborne pollen in the Mediterranean region, a pollen measurement campaign was performed during February-May 2018, at the Finokalia station in Crete. A ground-based multi-wavelength Raman polarization lidar PollyXT performed continuous measurements, together with a Hirst-type Burkard pollen sampler. The optical properties of pollen layers with presence of airborne pollen are retrieved and presented. Dust-free condition is applied for pollen study, using the dust models.

This paper presents a collection of lidar-derived aerosol intensive optical properties for several aerosol types, namely the particle linear depolarization ratio, the extinction-to-backscatter ratio (lidar ratio) and the Ångström exponent. The data collection, named DeLiAn, is based on globally distributed, long-term, ground-based, multiwavelength, Raman and polarization lidar measurements, conducted mainly with lidars that have been developed at the Leibniz Institute for Tropospheric Research. The intensive optical properties are presented at two wavelengths, 355 and 532 nm, for 13 aerosol categories. The categories cover the basic aerosol types (i.e., marine, pollution, continental European background, volcanic ash, smoke, mineral dust), as well as the most frequently observed mixtures they form. This extensive collection also incorporates more peculiar aerosol categories, including dried marine aerosol that, compared to marine aerosol, exhibits a significantly enhanced depolarization ratio (up to 15 %). Besides Saharan dust, additional mineral dust types related to their source region were identified due to their lower lidar ratios (Central Asian and Middle Eastern dust). In addition, extreme wildfire events (such as in north America and Australia) emitted smoke into the stratosphere showing significantly different optical properties, i.e., high depolarization values (up to 25 %), compared to tropospheric smoke. The data collection reflects and underlines the variety of aerosol mixtures in the atmosphere and can be used for the development of aerosol-typing schemes. The paper contains the most up-to-date and comprehensive overview of optical properties from aerosol lidar measurements and, therefore, provides a solid basis for future aerosol retrievals in the frame of both spaceborne and ground-based lidars. Furthermore, DeLiAn can assist the efforts for the harmonization of satellite records of aerosol properties performed at different wavelengths. [ABSTRACT FROM AUTHOR]

Geometrical and optical characteristics of cirrus clouds using Raman lidar PollyXT measurements at different locations are presented. The PollyXT has been participated in two long-term experimental campaigns, one close to New Delhi in India and one at Elandsfontein in South Africa, providing continuous measurements and covering a wide range of cloud types. First results of cirrus cloud properties at different latitudes, as well as their temporal distributions are presented in this study. An automatic cirrus clouds detection algorithm is applied based on the wavelet covariance transform. The measurements at New Delhi performed from March 2008 to February 2009, while at Elandsfontein measurements were performed from December 2009 to January 2011.

This paper presents a collection of lidar-derived aerosol intensive optical properties for several aerosol types, namely the particle linear depolarization ratio, the extinction-to-backscatter ratio (lidar ratio) and the Ångström exponent. The data collection, named DeLiAn, is based on globally distributed, long-term, ground-based, multiwavelength, Raman and polarisation lidar measurements, conducted mainly with lidars that have been developed at the Leibniz Institute for Tropospheric Research. The intensive optical properties are presented at two wavelengths, 355 and 532 nm, for 13 aerosol categories. The categories cover the basic aerosol types (i.e., marine, pollution, continental European background, volcanic ash, smoke, mineral dust) as well as the most frequently observed mixtures they form. This extensive collection also incorporates more peculiar aerosol categories, including dried marine aerosol that, compared to marine aerosol, exhibits a significantly enhanced depolarization ratio (up to 15 %). Besides Saharan dust, additional mineral dust types related to their source region were identified due to their lower lidar ratios (Central Asian and Middle Eastern dust). In addition, extreme wildfire events (such as in north America and Australia) emitted smoke into the stratosphere showing significant different optical properties, i.e., high depolarization values (up to 25 %), compared to tropospheric smoke. The data collection reflects and underlines the variety of aerosol mixtures in the atmosphere and can be used for the development of aerosol typing schemes. The paper contains the currently most comprehensive overview of optical properties from aerosol lidar measurements and, therefore, provides a solid basis for future aerosol retrievals in the frame of both spaceborne and ground-based lidars. Furthermore, DeLiAn can assist the efforts for harmonization of satellite records of aerosol properties performed at different wavelengths. [ABSTRACT FROM AUTHOR]

A quantitative comparison study for Raman lidar and ceilometer observations, and for model simulations of mass concentration estimates of smoke particles is presented. Layers of biomass burning aerosol particles were observed in the lower troposphere, at 2 to 5 km height on 4 to 6 June 2019, over Kuopio, Finland. These long-range-transported smoke particles originated from a Canadian wildfire event. The most pronounced smoke plume detected on 5 June was intensively investigated. Optical properties were retrieved from the multi-wavelength Raman polarization lidar Polly XT. Particle linear depolarization ratios (PDRs) of this plume were measured to be 0.08±0.02 at 355 nm and 0.05±0.01 at 532 nm, suggesting the presence of partly coated soot particles or particles that have mixed with a small amount of dust or other non-spherical aerosol type. The layer-mean PDR at 355 nm (532 nm) decreased during the day from ∼0.11 (0.06) in the morning to ∼0.05 (0.04) in the evening; this decrease with time could be linked to the particle aging and related changes in the smoke particle shape properties. Lidar ratios were derived as 47±5 sr at 355 nm and 71±5 sr at 532 nm. A complete ceilometer data processing for a Vaisala CL51 ceilometer is presented from a sensor-provided attenuated backscatter coefficient to particle mass concentration (including the water vapor correction for high latitude for the first time). Aerosol backscatter coefficients (BSCs) were measured at four wavelengths (355, 532, 1064 nm from Polly XT and 910 nm from CL51). Two methods, based on a combined lidar and sun-photometer approach, are applied for mass concentration estimations from both Polly XT and the ceilometer CL51 observations. In the first method, no. 1, we used converted BSCs at 532 nm (from measured BSCs) by corresponding measured backscatter-related Ångström exponents, whereas in the second method, no. 2, we used measured BSCs at each wavelength independently. A difference of ∼12 % or ∼36 % was found between Polly XT and CL51 estimated mass concentrations using method no. 1 or no. 2, showing the potential of mass concentration estimates from a ceilometer. Ceilometer estimations have an uncertainty of ∼50 % in the mass retrieval, but the potential of the data lies in the great spatial coverage of these instruments. The mass retrievals were compared with the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) meteorological and aerosol reanalysis. The inclusion of dust (as indicated by MERRA-2 data) in the retrieved mass concentration is negligible considering the uncertainties, which also shows that ceilometer observations for mass retrievals can be used even without exact knowledge of the composition of the smoke-dominated aerosol plume in the troposphere. [ABSTRACT FROM AUTHOR]

Layers of biomass burning aerosol particles were observed in the lower troposphere, at 2 to 5 km height on 4 to 6 June 2019, over Kuopio, Finland. These long-range-transported smoke particles originated from a Canadian wildfire event. The most pronounced smoke plume detected on 5 June was intensively investigated. Optical properties were retrieved from the multi-wavelength Raman polarization lidar PollyXT. Particle linear depolarization ratios of this plume were measured to be 0.08 ± 0.02 at 355 nm and 0.05 ± 0.01 at 532 nm which were slightly higher than the values given in the literature. Nonspherical shaped aged smoke particles and/or the mixing with a small amount of fine dust particles could cause the observed increase in the particle linear depolarization ratios. Lidar ratios were derived as 47 ± 5 sr at 355 nm and 71 ± 5 sr at 532 nm. A complete ceilometer data processing for a Vaisala CL51 is presented, including the water vapor correction for high latitude for the first time, from sensor provided attenuated backscatter coefficient to particle mass concentration. A combined lidar and sun-photometer approach (based on AERONET products) is applied for mass concentration estimations. Mass concentrations were estimated from both PollyXT and the ceilometer CL51 observations, which were of the order of ~ 30 µg m-3 in the morning and decreased to ~ 20 µg m-3 in the night. A difference of ~ 30 % was found between PollyXT and CL51 estimated mass concentrations. The mass retrievals were discussed and compared with the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) meteorological and aerosol reanalysis. The inclusion of dust in the retrieved mass concentration slightly improved the correspondence between the observations and the MERRA-2 simulations. [ABSTRACT FROM AUTHOR]

Lidar observations during the pollen season 2019 at the European Aerosol Research Lidar Network (EARLINET) station in Kuopio, Finland, were analyzed in order to optically characterize atmospheric pollen. Pollen concentration and type information were obtained by a Hirst-type volumetric air sampler. Previous studies showed the detectability of non-spherical pollen using depolarization ratio measurements. We present lidar depolarization ratio measurements at three wavelengths of atmospheric pollen in ambient conditions. In addition to the depolarization ratio detected with the multiwavelength Raman polarization lidar Polly XT at 355 and 532 nm, depolarization measurements of a co-located Halo Doppler lidar at 1565 nm were utilized. During a 4 d period of high birch (Betula) and spruce (Picea abies) pollen concentrations, unusually high depolarization ratios were observed within the boundary layer. Detected layers were investigated regarding the share of spruce pollen to the total pollen number concentration. Daily mean linear particle depolarization ratios of the pollen layers on the day with the highest spruce pollen share are 0.10 ± 0.02, 0.38 ± 0.23 and 0.29 ± 0.10 at 355, 532 and 1565 nm, respectively, whereas on days with lower spruce pollen share, depolarization ratios are lower with less wavelength dependence. This spectral dependence of the depolarization ratios could be indicative of big, non-spherical spruce pollen. The depolarization ratio of pollen particles was investigated by applying a newly developed method and assuming a backscatter-related Ångström exponent of zero. Depolarization ratios of 0.44 and 0.16 at 532 and 355 nm for the birch and spruce pollen mixture were determined. [ABSTRACT FROM AUTHOR]

We introduce an automated aerosol type classification method, called Source Classification Analysis (SCAN). SCAN is based on predefined and characterized aerosol source regions, the time that the air parcel spends above each geographical region, and a number of additional criteria. The output of SCAN is compared with two independent aerosol classification methods, which use the intensive optical parameters from lidar data: (1) the Mahalanobis distance automatic aerosol type classification (MD) and (2) a neural network aerosol typing algorithm (NATALI). In this paper, data from the European Aerosol Research Lidar Network (EARLINET) have been used. A total of 97 free tropospheric aerosol layers from four typical EARLINET stations (i.e., Bucharest, Kuopio, Leipzig, and Potenza) in the period 2014–2018 were classified based on a 3β+2α+1δ lidar configuration. We found that SCAN, as a method independent of optical properties, is not affected by overlapping optical values of different aerosol types. Furthermore, SCAN has no limitations concerning its ability to classify different aerosol mixtures. Additionally, it is a valuable tool to classify aerosol layers based on even single (elastic) lidar signals in the case of lidar stations that cannot provide a full data set (3β+2α+1δ) of aerosol optical properties; therefore, it can work independently of the capabilities of a lidar system. Finally, our results show that NATALI has a lower percentage of unclassified layers (4 %), while MD has a higher percentage of unclassified layers (50 %) and a lower percentage of cases classified as aerosol mixtures (5 %). [ABSTRACT FROM AUTHOR]

Lidar observations during the pollen season 2019 at the European Aerosol Research Lidar Network (EARLINET) station in Kuopio, Finland were analyzed in order to optically characterize atmospheric pollen. Previous studies showed the detectability of non-spherical pollen using depolarization ratio measurements. We present lidar depolarization ratio measurements at three wavelengths of atmospheric pollen in ambient conditions. In addition to the depolarization ratio detected with the multiwavelength Raman polarization lidar PollyXT at 355 and 532 nm, depolarization measurements of a co-located HALO Photonics Streamline Doppler lidar at 1565 nm were utilized. During a four days period of high birch (Betula) and spruce (Picea abies) pollen concentrations, unusually high depolarization ratios were observed within the boundary layer. Detected layers were investigated regarding the share of spruce pollen to the total pollen number concentration. Daily mean particle depolarization ratios of the pollen layers on the day with the highest spruce pollen share are 0.10 ± 0.02, 0.38 ± 0.23 and 0.29 ± 0.10 at 355, 532 and 1565 nm, respectively. Whereas on days with lower spruce pollen share, depolarization ratios are lower with less wavelength dependence. This spectral dependence of the depolarization ratios could be indicative of big, non-spherical spruce pollen. The depolarization ratio of pollen particles was investigated by applying a newly developed method and assuming a backscatter-related Ångström exponent of zero. Depolarization ratios of 0.44 and 0.16 at 532 and 355 nm for the birch and spruce pollen mixture were determined. [ABSTRACT FROM AUTHOR]

We present a novel algorithm for characterizing the optical properties of pure pollen particles, based on the depolarization ratio values obtained in lidar measurements. The algorithm was first tested and validated through a simulator and then applied to the lidar observations during a 4-month pollen campaign from May to August 2016 at the European Aerosol Research Lidar Network (EARLINET) station in Kuopio (62 ∘ 44 ′ N, 27 ∘ 33 ′ E), in Eastern Finland. With a Burkard sampler, 20 types of pollen were observed and identified from concurrent measurements, with birch (Betula), pine (Pinus), spruce (Picea), and nettle (Urtica) pollen being the most abundant, contributing more than 90 % of the total pollen load, regarding number concentrations. Mean values of lidar-derived optical properties in the pollen layer were retrieved for four intense pollination periods (IPPs). Lidar ratios at both 355 and 532 nm ranged from 55 to 70 sr for all pollen types, without significant wavelength dependence. An enhanced depolarization ratio was found when there were pollen grains in the atmosphere, and an even higher depolarization ratio (with mean values of 0.25 or 0.14) was observed with the presence of the more non-spherical spruce or pine pollen. Under the assumption that the backscatter-related Ångström exponent between 355 and 532 nm should be zero for pure pollen, the depolarization ratio of pure pollen particles at 532 nm was assessed, resulting in 0.24±0.01 and 0.36±0.01 for birch and pine pollen, respectively. Pollen optical properties at 1064 and 355 nm were also estimated. The backscatter-related Ångström exponent between 532 and 1064 nm was assessed to be ∼0.8 (∼0.5) for pure birch (pine) pollen; thus the longer wavelength would be a better choice to trace pollen in the air. Pollen depolarization ratios of 0.17 and 0.30 at 355 nm were found for birch and pine pollen, respectively. The depolarization values show a wavelength dependence for pollen. This can be the key parameter for pollen detection and characterization. [ABSTRACT FROM AUTHOR]

We introduce an automated aerosol type classification method, called Source Classification ANalysis (SCAN). SCAN is based on predefined and characterized aerosol source regions, the time that the air parcel spends above each geographical region and a number of additional criteria. The output of SCAN is compared with two independent aerosol classification methods, which use the intensive optical parameters from lidar data: (1) Mahalanobis distance automatic aerosol type classification (MD) and (2) Neural Network Aerosol Typing Algorithm (NATALI). In this paper, data from the European Aerosol Research Lidar Network (EARLINET) have been used. A total of 97 free tropospheric (FT) aerosol layers from 4 typical EARLINET stations (i.e., Bucharest, Kuopio, Leipzig and Potenza) in the period 2014-2018 were classified based on a 3β+2α+1δ lidar configuration. We found that SCAN, being an optical property independent method, is not affected by the overlapping optical values of different aerosol types. Furthermore, SCAN has no limitations concerning its ability to classify different aerosol mixtures. Additionally, it is a valuable tool to classify aerosol layers, based on even to single (elastic) lidar signals, in case of lidar stations which cannot provide a full data set (3β+2α+1δ) of aerosol optical properties, therefore it can work independently of the capabilities of a lidar system. Finally, our results show that NATALI has the lower percentage of unclassified layers (4 %), while MD has the percentage of unclassified layers (50 %) and the lower percentage of cases classified as aerosol mixtures (5 %). [ABSTRACT FROM AUTHOR]

We present a novel algorithm for characterizing the optical properties of pure pollen particles, based on the depolarization values obtained in lidar measurements. The algorithm was first tested and validated through a simulator, and then applied to the lidar observations during a four-month pollen campaign from May to August 2016 at the European Aerosol Research Lidar Network (EARLINET) station in Kuopio (62°44' N, 27°33' E), in Eastern Finland. Twenty types of pollen were observed and identified from concurrent measurements with Burkard sampler; Birch (Betula), pine (Pinus), spruce (Picea) and nettle (Urtica) pollen were most abundant, contributing more than 90% of total pollen load, regarding number concentrations. Mean values of lidar-derived optical properties in the pollen layer were retrieved for four intense pollination periods (IPPs). Lidar ratios at both 355 and 532 nm ranged from 55 to 70 sr for all pollen types, without significant wavelength-dependence. Enhanced depolarization ratio was found when there were pollen grains in the atmosphere, and even higher depolarization ratio (with mean values of 25% or 14%) was observed with presence of the more non-spherical spruce or pine pollen. The depolarization ratio at 532 nm of pure pollen particles was assessed, resulting to 24 ± 3% and 36 ± 5% for birch and pine pollen, respectively. Pollen optical properties at 1064 nm and 355 nm were also estimated. The backscatter-related Ångström exponent between 532 and 1064 nm was assessed as ~ 0.8 (~ 0.5) for pure birch (pine) pollen, thus the longer wavelength would be better choice to trace pollen in the air. The pollen depolarization ratio at 355 nm of 17% and 30% were found for birch and pine pollen, respectively. The depolarization values show a wavelength dependence for pollen. This can be the key parameter for pollen detection and characterization. [ABSTRACT FROM AUTHOR]

One year of ground-based night-time Raman lidar observations has been analysed under the Optimization of Aerosol Seeding In rain enhancement Strategies (OASIS) project, in order to characterize the aerosol particle properties over a rural site in the United Arab Emirates. In total, 1130 aerosol particle layers were detected during the 1-year measurement campaign which took place between March 2018 and February 2019. Several subsequent aerosol layers could be observed simultaneously in the atmosphere up to 11 km. The observations indicate that the measurement site is a receptor of frequent dust events, but predominantly the dust is mixed with aerosols of anthropogenic and/or marine origin. The mean aerosol optical depth over the measurement site ranged at 0.37 ± 0.12 and 0.21 ± 0.11 for 355 and 532 nm, respectively. Moreover, mean lidar ratios of 43 ± 11 sr at a wavelength of 355 nm and 39 ± 10 sr at 532 nm were found. The average linear particle depolarization ratio measured over the course of the campaign was 15 ± 6 % and 19 ± 7 % at the 355 and 532 nm wavelengths, respectively. Since the region is both a source and a receptor of mineral dust, we have also explored the properties of Arabian mineral dust of the greater area of the United Arab of Emirates and the Arabian Peninsula. The observed Arabian dust particle properties were 45 ± 5 (42 ± 5) sr at 355 (532) nm for the lidar ratio, 25 ± 2 % (31 ± 2 %) for the linear particle depolarization ratio at 355 (532) nm, and 0.3 ± 0.2 (0.2 ± 0.2) for the extinction-related Ångström exponent (backscatter-related Ångström exponent) between 355 and 532 nm. This study is the first to report comprehensive optical properties of the Arabian dust particles based on 1-year long observations, using to their fullest the capabilities of a multi-wavelength Raman lidar instrument. The results suggest that the mineral dust properties over the Middle East and western Asia, including the observation site, are comparable to those of African mineral dust with regard to the particle depolarization ratios, but not for lidar ratios. The smaller lidar ratio values in this study compared to the reference studies are attributed to the difference in the geochemical characteristics of the soil originating in the study region compared to northern Africa. [ABSTRACT FROM AUTHOR]

Measurements of geometrical and optical properties of cirrus clouds, performed with a multi-wavelength Polly XT Raman lidar during the period 2008 to 2016, are analysed. The measurements were performed with the same instrument, during sequential periods, in three places at different latitudes, Gwal Pahari (28.43 ∘ N, 77.15 ∘ E; 243 m a.s.l.) in India, Elandsfontein (26.25 ∘ S, 29.43 ∘ E; 1745 m a.s.l.) in South Africa and Kuopio (62.74 ∘ N, 27.54 ∘ E; 190 m a.s.l.) in Finland. The lidar dataset was processed by an automatic cirrus cloud masking algorithm, developed in the frame of this work. In the following, we present a statistical analysis of the lidar-retrieved geometrical characteristics (cloud boundaries, geometrical thickness) and optical properties of cirrus clouds (cloud optical depth, lidar ratio, ice crystal depolarisation ratio) measured over the three areas that correspond to subtropical and subarctic regions as well as their seasonal variability. The effect of multiple scattering from ice particles to the derived optical products is also considered and corrected in this study. Our results show that cirrus layers, which have a noticeable monthly variability, were observed between 6.5 and 13 km, with temperatures ranging from -72 to -27 ∘ C. The observed differences on cirrus clouds' geometrical and optical properties over the three regions are discussed in terms of latitudinal and temperature dependence. The latitudinal dependence of the geometrical properties is consistent with satellite observations, following the pattern observed with CloudSat, with decreasing values towards the poles. The geometrical boundaries have their highest values in the subtropical regions, and overall, our results seem to demonstrate that subarctic cirrus clouds are colder, lower and optically thinner than subtropical cirrus clouds. The dependence of cirrus cloud geometrical thickness and optical properties on mid-cirrus temperatures shows a quite similar tendency for the three sites but less variability for the subarctic dataset. Cirrus clouds are geometrically and optically thicker at temperatures between -45 and -35 ∘ C, and a second peak is observed at lower temperatures ∼-70 ∘ C for the subarctic site. Lidar ratio values also exhibit a pattern, showing higher values moving toward the poles, with higher mean values observed over the subarctic site. The dependency of the mid-cirrus temperatures on the lidar ratio values and the particle depolarisation values is further examined. Our study shows that the highest values of the cirrus lidar ratio correspond to higher values of cirrus depolarisation and warmer cirrus. The kind of information presented here can be rather useful in the cirrus parameterisations required as input to radiative transfer models and can be a complementary tool for satellite products that cannot provide cloud vertical structure. In addition, ground-based statistics of the cirrus properties could be useful in the validation and improvement of the corresponding derived products from satellite retrievals. [ABSTRACT FROM AUTHOR]

A new method, called ElEx (elastic extinction), is proposed for the estimation of extinction coefficient lidar profiles using only the information provided by the elastic and polarization channels of a lidar system. The method is applicable to lidar measurements both during daytime and nighttime under well-defined aerosol mixtures. ElEx uses the particle backscatter profiles at 532 nm and the vertically resolved particle linear depolarization ratio measurements at the same wavelength. The particle linear depolarization ratio and the lidar ratio values of pure aerosol types are also taken from literature. The total extinction profile is then estimated and compared well with Raman retrievals. In this study, ElEx was applied in an aerosol mixture of marine and dust particles at Finokalia station during the CHARADMExp campaign. Any difference between ElEx and Raman extinction profiles indicates that the nondust component could be probably attributed to polluted marine or polluted continental aerosols. Comparison with sun photometer aerosol optical depth observations is performed as well during daytime. Differences in the total aerosol optical depth are varying between 1.2 % and 72 %, and these differences are attributed to the limited ability of the lidar to correctly represent the aerosol optical properties in the near range due to the overlap problem. [ABSTRACT FROM AUTHOR]

We present the results of birch pollen characterization using lidar and in situ measurements based on a 11 d pollination period from 5 to 15 May 2016 at the European Aerosol Research Lidar Network (EARLINET) station in Vehmasmäki (Kuopio; 62 ∘ 44 ′ N, 27 ∘ 33 ′ E), Finland. The ground-based multiwavelength Raman polarization lidar Polly XT performed continuous measurements at this rural forest site and has been combined with a Hirst-type volumetric air sampler, which measured the pollen type and concentration at roof level (4 m). The period was separated into two parts due to different atmospheric conditions and detected pollen types. During the first period, high concentrations of birch pollen were measured with a maximum 2 h average pollen concentration of 3700 grains m -3. Other pollen types represented less than 3 % of the total pollen count. In observed pollen layers, the mean particle depolarization ratio at 532 nm was 10±6 % during the intense birch pollination period. Mean lidar ratios were found to be 45±7 and 55±16 sr at 355 and 532 nm, respectively. During the second period, birch pollen was still dominant, but a significant contribution of spruce pollen was observed as well. Spruce pollen grains are highly nonspherical, leading to a larger mean depolarization ratio of 26±7 % for the birch–spruce pollen mixture. Furthermore, higher lidar ratios were observed during this period with mean values of 60±3 and 62±10 sr at 355 and 532 nm, respectively. The presented study shows the potential of the particle depolarization ratio to track pollen grains in the atmosphere. [ABSTRACT FROM AUTHOR]

In this study we estimate the particle extinction profiles at Finokalia, Crete, using only the information provided by the elastic and polarization channels of a PollyXT lidar system. Most of the time Finokalia site is affected by only two aerosol types, i.e. marine and dust particles. These two aerosol types, having different optical properties, permit the separation of aerosol mixture. The proposed method uses the particle backscatter profiles at 532 nm and the vertically resolved particle linear depolarization ratio measurements at the same wavelength. The particle linear depolarization ratio and the lidar ratio values of pure aerosol types are taken from literature. The total extinction profile is then estimated and compared well with Raman retrievals. Any difference between the proposed methodology and Raman extinction profiles indicates that the non-dust component could be probably attributed to polluted marine or polluted continental aerosols. Comparison with sun-photometric aerosol optical depth observations is performed as well during daytime with reasonable differences between the two instruments. Differences in the total aerosol optical depth is attributed to the limited ability of the lidar to correctly represent the aerosol optical properties in the near range due to overlap problem. [ABSTRACT FROM AUTHOR]

We present the results of birch pollen characterization using lidar measurements based on a 11-day period of birch pollination from 5 to 15 May 2016 at the European Aerosol Research Lidar Network (EARLINET) station in Vehmasmäki (Kuopio, 62°44′ N, 27°33′ E), Finland. The ground-based multi-wavelength Raman lidar PollyXT performed continuous measurements at this rural forest site and has been combined with a Hirst-type volumetric air sampler which measured the pollen type and concentration on roof level (4 m). The period was separated into two parts due to different atmospheric conditions and detected pollen types. During the first period, high concentrations of birch pollen were measured with a maximum two-hour average pollen concentration of 3700 grains/m³. Other pollen types represented less than 3 % of the total pollen count. In observed pollen layers, the mean particle depolarization ratio at 532 nm was 10 ± 6 % during the intense birch pollination period. Mean lidar ratios were found to be 45 ± 7 and 55 ± 16 sr at 355 and 532 nm, respectively. During the second period, birch pollen was still dominant but a significant contribution of spruce pollen was observed. Spruce pollen grains are highly non-spherical, leading to a larger mean depolarization ratio of 26 ± 7 % of the birch-spruce pollen mixture. Furthermore, higher lidar ratios were observed during this period with a mean value of 60 ± 3 and 62 ± 10 sr at 355 and 532 nm, respectively. The presented study shows the potential of the particle depolarization ratio to track pollen grains in the atmosphere. [ABSTRACT FROM AUTHOR]

Measurements of cirrus clouds geometrical and optical properties, performed with a multi-wavelength PollyXT Raman Lidar, during the period 2008 to 2016 are analysed. The measurements were performed with the same instrument, during sequential periods, in three places at different latitudes, Gual Pahari (28.43° N, 77.15° E, 243 m a.s.l) in India, Elandsfontein (26.25° S, 29.43° E, 1745 m a.s.l) in South Africa and Kuopio (62.74° N, 27.54° E, 190 m a.s.l) in Finland. The lidar dataset has been processed by an automatic cirrus cloud detection algorithm. In the following, we present a statistical analysis of the lidar derived geometrical characteristics (cloud boundaries, geometrical thickness) and optical properties of cirrus clouds (cloud optical depth, lidar ratio, ice crystal depolarization ratio) measured in different latitudes that correspond to subtropical and subarctic regions as well as their seasonal variability. The effect of multiple-scattering from ice particles to the derived optical products is also considered and corrected in this study. Our results show that, over the subtropical stations, cirrus layers, which have a noticeable monthly variability, were observed between 7 to 13 km, with mid-cloud temperatures ranging from -60 °C to -21 °C and a mean thickness of 1295 ± 489 m and 1383 ± 735 m for Gual Pahari and Elandsfontein respectively. The corresponding overall mean cirrus optical depth at 355 nm is calculated to be 0.59 ± 0.39 and 0.40 ± 0.33, with lidar ratio values at 355 nm of 26 ± 12 sr and 25 ± 6 sr, respectively. A more extended dataset was acquired for the subarctic area of Kuopio Finland, between 2012 and 2016. The estimated average geometrical thickness of the cirrus clouds over Kuopio is 1200 ± 585 m and the temperature values vary from -71 °C to -21 °C, while the mean cirrus optical depth at 355 nm is 0.25 ± 0.2, with an estimated mean lidar ratio of 33 ± 7 sr, similar to the idar ratio values observed over middle latitude stations. The kind of information presented here can be rather useful in the cirrus parameterizations required as input to radiative transfer models, and can be a complementary tool to satellite products that cannot provide cloud vertical structure. In addition, a ground-based statistics of the cirrus properties could be useful in the validation and improvement of the corresponding derived products from satellite retrievals. [ABSTRACT FROM AUTHOR]

In this work, the height of the planetary boundary layer (PBLH) is investigated over Gwal Pahari (Gual Pahari), New Delhi, for almost a year. To this end, ground-based measurements from a multiwavelength Raman lidar were used. The modified wavelet covariance transform (WCT) method was utilized for PBLH retrievals. Results were compared to data from Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) and the Weather Research and Forecasting (WRF) model. In order to examine the difficulties of PBLH detection from lidar, we analyzed three cases of PBLH diurnal evolution under different meteorological and aerosol load conditions. In the presence of multiple aerosol layers, the employed algorithm exhibited high efficiency (r=0.9) in the attribution of PBLH, whereas weak aerosol gradients induced high variability in the PBLH. A sensitivity analysis corroborated the stability of the utilized methodology. The comparison with CALIPSO observations yielded satisfying results (r=0.8), with CALIPSO slightly overestimating the PBLH. Due to the relatively warmer and drier winter and, correspondingly, colder and rainier pre-monsoon season, the seasonal PBLH cycle during the measurement period was slightly weaker than the cycle expected from long-term climate records. [ABSTRACT FROM AUTHOR]

Ground-based lidar measurements were performed at Gual Pahari measurement station, approximately 20km South of New Delhi, India, from March 2008 to March 2009. The height of the Planetary Boundary Layer (PBL) was retrieved with a portable Raman lidar system, utilizing the modified Wavelet Covariance Transform (WCT) method. The lidar derived PBL heights were compared to radiosonde data, Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite observations and two atmospheric models. The results were also analyzed on a seasonal basis. To examine the difficulties of PBL lidar detection under different meteorological and aerosol load conditions we focused on three case studies of PBL diurnal evolution. In the presence of a multiple aerosol layer structure, the WCT method exhibited high efficiency in PBL height determination. Good agreement with the European Center for Medium-range Weather Forecasts (ECMWF) and the Weather Research and Forecasting (WRF) estimations was found (r=0.69 and r=0.74, respectively) for a cumulus convection case. In the aforementioned cases, temperature, relative humidity and potential temperature radiosonde profiles were well compared to the respective WRF profiles. The Bulk Richardson Number scheme, which was applied to radiosonde profile data, was in good agreement with lidar data, especially during daytime (r=0.68). The overall comparison with CALIPSO satellite observations; namely, CALIOP Level 2 Aerosol Layer Product, was very satisfying (r=0.84), with CALIPSO Feature Detection Algorithms slightly overestimating PBL height. Lidar measurements revealed that the maximum PBL height was reached approximately three hours after the solar noon, whilst the daily evolution of the PBL was completed, on average, one hour earlier. The PBL diurnal cycle was also analyzed using ECMWF estimations, which produced a stronger cycle during the winter and pre-monsoon period. The seasonal analysis of lidar PBL heights yielded a less pronounced PBL cycle than the one expected from long term climate records. The lowest mean daytime PBL height (695m) appeared in winter, while the highest mean daytime PBL height (1326m) was found in the monsoon season as expected. PBL daily growth rates exhibited also a weak seasonal variability. [ABSTRACT FROM AUTHOR]

We present tropospheric water vapor profiles measured with a Raman lidar during three field campaigns held in Finland. Co-located radio soundings are available throughout the period for the calibration of the lidar signals. We investigate the possibility of calibrating the lidar water vapor profiles in the absence of co-existing on-site soundings using water vapor profiles from the combined Advanced InfraRed Sounder (AIRS) and the Advanced Microwave Sounding Unit (AMSU) satellite product; the Aire Limitée Adaptation dynamique Développement INternational and High Resolution Limited Area Model (ALADIN/HIRLAM) numerical weather prediction (NWP) system, and the nearest radio sounding station located 100 km away from the lidar site (only for the permanent location of the lidar). The uncertainties of the calibration factor derived from the soundings, the satellite and the model data are< 2:8, 7.4 and 3.9%, respectively. We also include water vapor mixing ratio intercomparisons between the radio soundings and the various instruments/model for the period of the campaigns. A good agreement is observed for all comparisons with relative errors that do not exceed 50% up to 8 km altitude in most cases. A 4- year seasonal analysis of vertical water vapor is also presented for the Kuopio site in Finland. During winter months, the air in Kuopio is dry (1:15±0:40 gkg-1); during summer it is wet (5:54±1:02 gkg-1); and at other times, the air is in an intermediate state. These are averaged values over the lowest 2 km in the atmosphere. Above that height a quick decrease in water vapor mixing ratios is observed, except during summer months where favorable atmospheric conditions enable higher mixing ratio values at higher altitudes. Lastly, the seasonal change in disagreement between the lidar and the model has been studied. The analysis showed that, on average, the model underestimates water vapor mixing ratios at high altitudes during spring and summer. [ABSTRACT FROM AUTHOR]

Optical and microphysical properties of different aerosol types over South Africa measured with a multiwavelength polarization Raman lidar are presented. This study could assist in bridging existing gaps relating to aerosol properties over South Africa, since limited long-term data of this type are available for this region. The observations were performed under the framework of the EUCAARI campaign in Elandsfontein. The multi-wavelength PollyXT Raman lidar system was used to determine vertical profiles of the aerosol optical properties, i.e. extinction and backscatter coefficients, Ångström exponents, lidar ratio and depolarization ratio. The mean microphysical aerosol properties, i.e. effective radius and single-scattering albedo, were retrieved with an advanced inversion algorithm. Clear differences were observed for the intensive optical properties of atmospheric layers of biomass burning and urban/industrial aerosols. Our results reveal a wide range of optical and microphysical parameters for biomass burning aerosols. This indicates probable mixing of biomass burning aerosols with desert dust particles, as well as the possible continuous influence of urban/ industrial aerosol load in the region. The lidar ratio at 355 nm, the lidar ratio at 532 nm, the linear particle depolarization ratio at 355 nm and the extinction-related Ångström exponent from 355 to 532 nm were 52±7 sr, 41±13 sr, 0.9±0.4% and 2.3±0.5, respectively, for urban/industrial aerosols, while these values were 92±10 sr, 75±14 sr, 3.2±1.3% and 1.7±0.3, respectively, for biomass burning aerosol layers. Biomass burning particles are larger and slightly less absorbing compared to urban/industrial aerosols. The particle effective radius were found to be 0.10±0.03, 0.17±0.04 and 0.13±0.03 μm for urban/industrial, biomass burning, and mixed aerosols, respectively, while the singlescattering albedo at 532 nm was 0.87±0.06, 0.90±0.06, and 0.88±0.07 (at 532 nm), respectively, for these three types of aerosols. Our results were within the same range of previously reported values. [ABSTRACT FROM AUTHOR]

Atmospheric-chemical coupled models usually parameterize sea-salt aerosol (SSA) emissions using whitecap fraction estimated considering only wind speed and ignoring sea state. This approach may introduce inaccuracies in SSA simulation. This study aims to assess the impact of sea state on SSA modeling, applying a new parameterization for whitecap fraction estimation based on wave age, calculated by the ratio between wave phase velocity and wind speed. To this end, the new parameterization was incorporated in the coupled Chemical Hydrological Atmospheric Ocean wave modeling System (CHAOS). CHAOS encompasses the wave model (WAM) two-way coupled through the OASIS3-MCT coupler with the Advanced Weather Research and Forecasting model coupled with Chemistry (WRF-ARW-Chem) and, thus, enabling the concurrent simulation of SSAs, wind speed and wave phase velocity. The simulation results were evaluated against in-situ and lidar measurements at 2 stations in Greece (Finokalia on 4 and 15 July 2014 and Antikythera-PANGEA on 15 September 2018). The results reveal significant differences between the parameterizations with the new one offering a more realistic representation of SSA levels in some layers of the lower atmosphere. This is attributed to the enhancement of the bubble-bursting mechanism representation with air-sea processes controlling whitecap fraction. Our findings also highlight the contribution of fresh wind-generated waves to SSA modeling. [ABSTRACT FROM AUTHOR]

The aim of this paper is to study the spatio-temporal evolution of a long-lasting Canadian biomass burning event that affected Europe in August 2018. The event produced biomass burning aerosol layers which were observed during their transport from Canada to Europe from the 16 to the 26 August 2018 using active remote sensing data from the space-borne system Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO). The total number of aerosol layers detected was 745 of which 42% were identified as pure biomass burning. The remaining 58% were attributed to smoke mixed with: polluted dust (34%), clean continental (10%), polluted continental (5%), desert dust (6%) or marine aerosols (3%). In this study, smoke layers, pure and mixed ones, were observed by the CALIPSO satellite from 0.8 and up to 9.6 km height above mean sea level (amsl.). The mean altitude of these layers was found between 2.1 and 5.2 km amsl. The Ångström exponent, relevant to the aerosol backscatter coefficient (532/1064 nm), ranged between 0.9 and 1.5, indicating aerosols of different sizes. The mean linear particle depolarization ratio at 532 nm for pure biomass burning aerosols was found equal to 0.05 ± 0.04, indicating near spherical aerosols. We also observed that, in case of no aerosol mixing, the sphericity of pure smoke aerosols does not change during the air mass transportation (0.05–0.06). On the contrary, when the smoke is mixed with dessert dust the mean linear particle depolarization ratio may reach values up to 0.20 ± 0.04, especially close to the African continent (Region 4). [ABSTRACT FROM AUTHOR]