Search

There is growing interest in the use of Landsat data to enable forest monitoring over large areas. Free and open data access combined with high performance computing have enabled new approaches to Landsat data analysis that use the best observation for any given pixel to generate an annual, cloud-free, gap-free, surface reflectance image composite. Finland has a long history of incorporating Landsat data into its National Forest Inventory to produce forest information in the form of thematic maps and small area statistics on a variety of forest attributes. Herein we explore the spatial and temporal characteristics of the Landsat archive in the context of forest monitoring in Finland. The United States Geological Survey Landsat archive holds a total of 30â076 images (1972â2017) for 66 scenes (each 185 km by 185 km in size) representing the terrestrial area of Finland, of which 93.6% were acquired since 1984 with a spatial resolution of 30 m. Approximately 16.3% of the archived images have desired compositing characteristics (acquired within August 1 ±30 days,

Nearly 30% of Finlandâs land area is covered by peatlands. In Northern parts of the country there is a significant amount of low-productive drained peatlands (LPDPs) where the average annual stem volume growth is less than 1 m ha. The re-use of LPDPs has been considered thoroughly since Finnish forest legislation was updated and the forest regeneration prerequisite was removed from LPDPs in January 2014. Currently, forestry is one of the re-use alternatives, thus detailed forest resource information is required for allocating activities. However, current forest inventory practices have not been evaluated for sparse growing stocks (e.g., LPDPs). The purpose of our study was to evaluate the suitability of airborne laser scanning (ALS) for mapping forest inventory attributes in LPDPs. We used ALS data with a density of 0.8 pulses per m, 558 field-measured reference plots (500 from productive forests and 58 from LPDPs) and nearest neighbour (-NN) estimation. Our main aim was to study the sensitivity of predictions to the number of LPDP reference plots used in the -NN estimation. When the reference data consisted of 500 plots from productive forest stands, the root mean square errors (RMSEs) for the prediction accuracy of Loreyâs height, basal area and stem volume were 1.4 m, 2.7 m ha and 13.7 m ha in LPDPs, respectively. When 30 additional reference plots were allocated to LPDPs, the respective RMSEs were 1.1 m, 1.7 m ha and 10.0Â m ha. Additional reference plot allocation did not affect the predictions in productive forest stands.3â12kkk2â13â12â13â1

Modern remote sensing provides cost-efficient spatial digital data that are more accurate than before. However, the influence of increased accuracy and cost-efficiency on simulations of forest management planning has not been evaluated. The aim of the present study was to analyse the effect of data acquisition accuracy on standwise forest inventory by comparing the accuracy and cost of traditional compartmentwise inventory methods with 2D and 3D measurements of digital aerial photographs and airborne laser scanning. Comparison was based on the expected net present value (NPV), i.e. economic losses that consisted of the inventory costs and incorrect timings of treatments. The reference data, totalling 700 ha, were measured from Central Park in the city of Helsinki, Finland. The data were simulated to final cut with a MOTTI simulator, which is a stand-level analysis tool that can be used to assess the effects of alternative forest management practices on growth and timber yield. The results showed that when inventory costs were not considered there were no significant differences between the expected NPV losses in 3D measurements of digital aerial photographs, laser scanning and the compartmentwise method. When inventory costs were taken into account, the compartmentwise method was still the most efficient inventory method in the study area. Forest inventories, however, are usually directed to larger areas when the costs per hectare of remote-sensing methods decrease. As a result of better accuracies, 3D and compartmentwise methods always produce better results than the 2D method when NPV losses are accounted. Simulations of this type are based on the accuracies and costs of the 3D data available today, assuming that the data can be used in tree-level measurements.

In many studies, adaptive cluster sampling (ACS) proved to be a powerful tool for assessing rare clustered populations that are difficult to estimate by means of conventional sampling methods. During 2002 and 2003, severe drought-caused damage was observed in the park forests of the City of Helsinki, Finland, especially in barren site pine and spruce stands. The aim of the present study was to examine sampling and measurement methods for assessing drought damage by analysing the effectiveness of ACS compared with simple random sampling (SRS). Horvitz-Thompson and Hansen-Hurwitz estimators of the ACS method were used for estimating the population mean and variance of the variable of interest. ACS was considerably more effective than SRS in assessing rare clustered populations such as those resulting from drought damage. The variances in the ACS methods were significantly smaller and the inventory efficiency in the field better than in SRS.

The increasing capacity of modern computers has created the opportunity to routinely process the very large data sets derived by digitizing aerial photographs. The very fine resolution of such data sets makes them better suited than satellite imagery for some applications; however, there may be problems in implementation resulting from variation in radial distortion and illumination across an aerial photograph. We investigated the feasibility of using local operators (e.g., non-overlapping moving window means and standard deviations) as auxiliary data for generating stand development classes via three steps: (i) derive 6 local operators intended to represent texture for a 16 by 16 m window corresponding to a forest inventory sampling unit, (ii) apply a calibration process (e.g., accounting for location relative to a photo's principal point and solar position) to these local operators, and (iii) apply the calibrated local operators to classify the forest for stand development. Results indicate that calibrated local operators significantly improve the classification compared to what is possible using uncalibrated local operators and satellite images.

Terrestrial laser scanning (TLS) has been adopted as a feasible technique to characterize tree stems while the characterization of trees' branching architecture has remained less explored. In general, branching architecture refers to the spatial arrangement of branches and their characteristics that are important when exploring the eco-physiological functioning of trees or assessing tree biomass and wood quality. Our aim was to develop a point cloud processing method for identifying and segmenting individual branches from TLS point clouds. We applied a Cartesian-to-cylinder coordinate transformation and a simple morphological filtering for stem surface reconstruction and stem-branch separation. Then branch origins were identified as their intersections with the stem surface, and individual branches were segmented based on their connectivity with the branch origins. The method, implemented in MATLAB and openly available, was validated on a 0.4-ha mature and managed southern boreal forest stand. The branch identification performance was assessed based on visual interpretation of 364 randomly sampled stem sections from 100 Scots pine (Pinus sylvestris (L.)) trees that were inspected for branch identification accuracy. The results showed that the branches could only be identified up to the height where the stem could be reconstructed. For 90% of the trees, this threshold ranged between 59.3% and 81.2% relative tree heights. Branches located below this threshold were identified with a recall of 75%, a precision of 92%, and an F1-score of 0.82. Based on our study, it appears that in a managed Scots pine stand, most of the branches can be identified with the developed method for the most valuable stem part eligible for logwood. The findings obtained in this study promote the feasibility of using TLS in applications requiring detailed characterization of trees. The developed method can be further used in quantifying the characteristics of individual branches, which could be useful for biomass and wood quality assessment, for example. [ABSTRACT FROM AUTHOR]

This study examines the precision of spatial data required for archaeological sites in Finland from a forest management perspective, identifies archaeological sites at risk due to forestry activities, and investigates potential collaboration between archaeology and forestry to enhance the preservation and understanding of these sites. Due to outdated methods and the lack of systematic field surveys, challenges in achieving accurate spatial data for archaeological sites are highlighted through a literature review, case studies, and fieldwork. Our findings indicate that a significant portion of sites lack boundary delineation, exposing them to the risk of destruction. Moreover, the study reveals limited collaboration between the archaeology and forestry sectors, despite mutual interests in site preservation. We advocate for improved spatial data accuracy using modern technological methods like precision GPS and enhanced cooperation between archaeologists and forestry professionals. This approach aims to protect Finland's archaeological heritage while promoting responsible forestry practices. Notably, fieldwork enabled the precise determination of the location of Finland's first separate plague cemetery, underscoring the value of direct field verification in enriching historical and archaeological understanding. [ABSTRACT FROM AUTHOR]

Tree species information is important for forest management, especially in seedling stands. To mitigate the spectral admixture of understory reflectance with small and lesser foliaged seedling canopies, we proposed an image pre-processing step based on the canopy threshold (Cth) applied on drone-based multispectral images prior to feeding classifiers. This study focused on (1) improving the classification of seedlings by applying the introduced technique; (2) comparing the classification accuracies of the convolutional neural network (CNN) and random forest (RF) methods; and (3) improving classification accuracy by fusing vegetation indices to multispectral data. A classification of 5417 field-located seedlings from 75 sample plots showed that applying the Cth technique improved the overall accuracy (OA) of species classification from 75.7% to 78.5% on the Cth-affected subset of the test dataset in CNN method (1). The OA was more accurate in CNN (79.9%) compared to RF (68.3%) (2). Moreover, fusing vegetation indices with multispectral data improved the OA from 75.1% to 79.3% in CNN (3). Further analysis revealed that shorter seedlings and tensors with a higher proportion of Cth-affected pixels have negative impacts on the OA in seedling forests. Based on the obtained results, the proposed method could be used to improve species classification of single-tree detected seedlings in operational forest inventory. [ABSTRACT FROM AUTHOR]

Deadwood provides a habitat for a large number of species and acts as a significant carbon storage. Thus, deadwood mapping allows planning various actions related to biodiversity conservation and forest management. Airborne laser scanning (ALS) provides an efficient means for monitoring large forested areas and is thus a potential method for deadwood mapping. Machine learning (ML) can be used for automating deadwood detection from ALS data. However, ML requires training data, collecting of which is laborious using field measurements. This study inspected the feasibility of training data manually annotated from aerial images for the mapping of individual standing dead trees. The standing dead trees were mapped from an ALS dataset collected with an unmanned aerial vehicle (UAV). The study was carried out by performing ML-based standing dead tree detection using annotated training data and field-measured training data, and comparing the performances of the models trained on these two datasets. The study found that using annotated training data improves the performance of standing dead tree detection due to its higher availability compared to field-measured data. For large trees (height > 14 m), the precision, recall, Cohen's kappa score, and Matthews correlation coefficient achieved by the best classifier trained on annotated data were 0.23, 0.48, 0.17, and 0.20, respectively. In comparison, the corresponding metrics for the best classifier trained on field-measured data were 0.14, 0.52, 0.04, and 0.13. Annotated standing dead tree data is not a representative sample of the true standing dead tree population, as small trees and trees without crowns (snags) can often not be identified from aerial images. However, the study found that identifying such trees is challenging even when using field-measured training data, and thus using annotated training data does not bias results. In general, the results of the study showed that ALS-based standing dead tree detection should focus on the detection of large trees. [ABSTRACT FROM AUTHOR]

The primary purpose of this study is to open the discussion of FAIR principles in Finnish archaeology. This topic has not yet been actively discussed in Finnish archaeology. In this study, we were testing whether adding keywords could increase the reusability of the Register of Ancient Sites, as the reusability level of the current register is low. The case study focuses on creating an overview of the Iron Age sites in the Itä-Häme area. Keywords were added for all of the 585 archaeological sites in the study area, based on field reports and find catalogues. After giving keywords to all of the sites, it was possible to make queries from the register and form a new, more detailed overview of the Iron Age sites in the Itä-Häme area. Our study revealed mistakes and ambiguities in the register, but adding keywords increased its reusability. However, it cannot solve the main issue: basic research has not been carried out extensively enough in Finland. Based on the overview, it can be seen that Itä-Häme was an active and important area in the Iron Age, and an especially meaningful possible new site type was identified; however, more research in this area is needed. [ABSTRACT FROM AUTHOR]

Fallen tree mapping provides valuable information regarding the ecological value of boreal forests. Airborne laser scanning (ALS) enables mapping fallen trees on a large scale. We compared the performance of line-detection-based individual fallen tree detection when using moderate point density ALS data (15 points/m2) and high-point-density unmanned aerial vehicle-based laser scanning (ULS) data (285 points/m2). Furthermore, we inspected the dataset and detection methodology-related factors impacting performance in each case. The results of this study showed that increasing the point density of the laser scanning dataset enables the detection of a larger proportion of fallen trees. However, based on our experiment, a line-detection-based fallen tree detection approach is sensitive to noise, thus generating a large number of false detections, especially with high-point-density data. Different types of filters, such as a simple height-based filter and machine-learning-based filters, can be used for reducing noise. However, using such filters is always a compromise, as in addition to reducing noise and thus false detections, they also reduce the number of true detections. Hence, a less noise-sensitive fallen tree detection method utilizing the finer details visible in high-density point clouds could be more suitable for high-point-density laser scanning data. [ABSTRACT FROM AUTHOR]