Search

Prognostic factors for total shoulder arthroplasty (TSA) clinical outcomes are incompletely understood. This study investigates the associations of preoperative patient, disease-specific, and surgical factors with 1-year postoperative PENN Shoulder Score (PSS) in patients undergoing primary TSA. Cleveland Clinic patients undergoing primary anatomic TSA (aTSA) or reverse TSA (rTSA) for glenohumeral osteoarthritis (GHOA) or rotator cuff tear arthropathy (CTA) between February 2015 and August 2019, and having complete preoperative and 1-year postoperative patient-reported outcome measures (PROMs), were included. Twenty preselected preoperative patient, disease-specific, and surgical factors were used to fit multivariable models for 1-year PSS and its subscores. Of 1427 eligible primary TSAs, 1174 had 1-year follow-up by PROMs (82%), with 1042 analyzed after additional exclusions, including 30% rTSAs for CTA (n = 308), 26% rTSAs for GHOA (n = 275), and 44% aTSAs for GHOA (n = 459). All PROMs showed statistically significant improvements postoperatively, with 89% of patients reaching an acceptable symptom state. Lower 1-year PSS was associated with younger age, female sex, current smoking, chronic pain diagnosis, history of prior surgery, worker's compensation claim, lower preoperative mental health, lower baseline PSS, absence of glenoid bone loss, and diagnosis-arthroplasty type (CTA-rTSA < GHOA-rTSA < GHOA-aTSA). The most important prognostic factors associated with 1-year PSS were diagnosis-arthroplasty type, baseline mental health status, and insurance status. Disease diagnosis, arthroplasty type, and several other baseline factors are strongly and individually associated with PROMs following primary TSA, with patients undergoing aTSA for GHOA demonstrating the highest PROM scores at 1-year follow-up. Patient, disease-specific, and surgical factors can be used to guide postoperative prognosis following primary TSA for improved preoperative patient counseling regarding expected outcomes of these procedures. [ABSTRACT FROM AUTHOR]

Background: Reestablishment of the native footprint during rotator cuff repair has been suggested as an important criterion for optimizing healing potential and fixation strength. Hypothesis: A double-row rotator cuff footprint [...]

Glenoid component loosening remains a common complication following anatomic total shoulder arthroplasty (TSA); however, plain radiographs are unable to accurately detect early implant migration. The purpose of this study was to validate the accuracy of a method of postoperative, three‐dimensional (3D) computed tomography (CT) imaging with metal artifact reduction (MAR) to detect glenoid component migration following anatomic TSA. Tantalum bead markers were inserted into polyethylene glenoid components for implant detection on 3D CT. In‐vitro validation was performed using a glenoid component placed into a scapula sawbone and incrementally translated and rotated, with MAR 3D CT acquired at each test position. Accuracy was evaluated by root mean square error (RMSE). In‐vivo validation was performed on six patients who underwent anatomic TSA, with two postoperative CT scans acquired in each patient and marker‐based radiostereometric analysis (RSA) performed on the same days. Glenoid component migration was calculated relative to a scapular coordinate system for both MAR 3D CT and RSA. Accuracy was evaluated by RMSE and paired Student's t‐tests. The largest RMSE on in‐vitro testing was 0.24 mm in translation and 0.11° in rotation, and on in‐vivo testing was 0.47 mm in translation and 1.04° in rotation. There were no significant differences between MAR 3D CT and RSA measurement methods. MAR 3D CT imaging is capable of quantifying glenoid component migration with a high level of accuracy. MAR 3D CT imaging is advantageous over RSA because it is readily available clinically and can also be used to evaluate the implant‐bone interface. [ABSTRACT FROM AUTHOR]

Background: The purpose of this study was to evaluate glenoid component position and radiolucency following anatomic total shoulder arthroplasty (TSA) using sequential 3-dimensional computed tomography (3D CT) analysis.Methods: In a series of 152 patients (42 Walch A1, 16 A2, 7 B1, 49 B2, 29 B3, 3 C1, 3 C2, and 3 D glenoids) undergoing anatomic TSA with a polyethylene glenoid component, sequential 3D CT analysis was performed preoperatively (CT1), early postoperatively (CT2), and at a minimum 2-year follow-up (CT3). Glenoid component shift was defined as a change in component version or inclination of ≥3° from CT2 to CT3. Glenoid component central anchor peg osteolysis (CPO) was assessed at CT3. Factors associated with glenoid component shift and CPO were evaluated.Results: Glenoid component shift occurred from CT2 to CT3 in 78 (51%) of the 152 patients. CPO was seen at CT3 in 19 (13%) of the 152 patients, including 15 (19%) of the 78 with component shift. Walch B2 glenoids with a standard component and glenoids with higher preoperative retroversion were associated with a higher rate of shift, but not of CPO. B3 glenoids with an augmented component and glenoids with greater preoperative joint-line medialization were associated with CPO, but not with shift. More glenoid component joint-line medialization from CT2 to CT3 was associated with higher rates of shift and CPO. A greater absolute change in glenoid component inclination from CT2 to CT3 and a combined absolute glenoid component version and inclination change from CT2 to CT3 were associated with CPO. Neither glenoid component shift nor CPO was associated with worse clinical outcomes.Conclusions: Postoperative 3D CT analysis demonstrated that glenoid component shift commonly occurs following anatomic TSA, with increased inclination the most common direction. Most (81%) of the patients with glenoid component shift did not develop CPO. Longer follow-up is needed to determine the relationships of glenoid component shift and CPO with loosening over time.Level Of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

The purpose of the study was to describe the characteristics and demonstrate proof-of-concept and clinical use of a barium sulfate infused polypropylene radiopaque tissue marker for soft tissue localization and in vivo measurement of lengths and areas. Marker mechanical properties were evaluated by tensile tests. Biocompatibility was evaluated following 8–12 weeks' implantation in a pig model. Proof-of-concept of marker application was performed in a human cadaveric shoulder model, and methods for CT imaging and measurement of dimensions were established. Lastly, the method of clinical use of the markers was described in one patient undergoing arthroscopic rotator cuff repair (RCR). The radiopaque markers had a tensile strength of 28 ±4.7 N and were associated with minimal to mild inflammatory tissue reaction similar to polypropylene control. CT-based measurements showed relatively high precisions for lengths (0.66 mm), areas (6.97 mm2), and humeral orientation angles (2.1°) in the cadaveric model, and demonstrated 19 ±3 mm medio-lateral tendon retraction and 227 ±3 mm2 increase in tendon area in the patient during 26 weeks following RCR. No radiographic leaching, calcification or local adverse events were observed. The radiopaque tissue marker was biocompatible and had adequate strength for handling and affixation to soft tissues using standard suturing techniques. The marker could be used with low-dose, sequential CT imaging to quantitatively measure rotator cuff tendon retractions with clinically acceptable accuracy. We envision the radiopaque tissue marker to be useful for soft tissue localization and in vivo measurement of tissue and organ dimensions following surgery. [ABSTRACT FROM AUTHOR]

Purpose: Estimation of anterior glenoid bone loss is important for surgical decision-making. The purpose of this study was to describe a method for estimating anterior glenoid bone loss.Methods: Thirty-nine cadaveric glenoids were digitized to obtain glenoid geometry. Glenoid bare spot centre, arthroscopic centre, and centre of the inferior glenoid circle relative to the geometric centre were measured. To simulate anterior glenoid bone loss, imaginary sequential osteotomies were created 0°, 22.5°, and 45° to the superior-inferior line in a 3D digitizing programme. Per cent of anterior glenoid bone loss area was calculated as the percentage of defect area relative to the entire area of the glenoid. The relationship between area loss and ratio of bone defect length to the distance from posterior glenoid to various centres was determined.Results: As the ratio of bone defect length to the distance from posterior glenoid to all three centres increased, the per cent area of bone loss increased exponentially. The ratio using the inferior circle centre and arthroscopic centre was highly correlated to the actual glenoid bone loss in all osteotomies (R 2 > 0.90). The ratio using the centre of bare area had the lowest correlation. The ratio of defect length to distance from posterior glenoid to arthroscopic centre greater than 2.4 for 0° and 2.0 for 45° osteotomies results in bone loss area greater than 25 %. The bare area centre had the largest variation. Average bone loss was overestimated when the centre of bare spot was used compared to other centre locations.Conclusion: Per cent of anterior glenoid bone loss can be estimated using the ratio of bone defect length to the distance from posterior glenoid rim to the centre of inferior glenoid circle or arthroscopic centre either preoperatively using 3D CT or arthroscopically which can be useful for determining surgical treatment. [ABSTRACT FROM AUTHOR]

Purpose: The optimum number of cross-stitches in modified Becker repair for extensor tendon injury is not known. The purpose of this study was to compare the biomechanical characteristics of 1, 2, and 3 cross-stitches in modified Becker extensor repairs. Methods: We used 8 fresh-frozen cadaveric hands (24 fingers). We exposed extensor tendons of the index, middle, and ring fingers over the proximal phalanx, cut them transversely at the mid-portion of zone IV (proximal phalanx), and repaired them in situ with a modified Becker technique with 1, 2, or 3 cross-stitches using 4-0 braided suture. We randomized the tendons within each hand for the number of cross-stitches. Stiffness, yield load, ultimate load, energy absorbed, and gap formation were measured. After a 5 N preload, each repair was cyclically loaded from 5 to 25 N for 30 cycles and from 5 to 35 N for 30 cycles at a rate of 20 mm/min to simulate loads during postoperative rehabilitation. After cyclic loading, the specimens were loaded to failure. Results: The repair with 1 cross-stitch showed superior gap resistance and stiffness during cyclic loading compared with 2 and 3 cross-stitches. One cross-stitch also resulted in higher stiffness and yield strength in load to failure testing. However, 3 cross-stitch configurations displayed higher ultimate strength. All repairs failed by knot slippage. Conclusions: A modified Becker extensor tendon repair with 1 cross-stitch provides superior mechanical properties for loads seen with postoperative rehabilitation compared with 2 and 3 cross-stitches for similar loads. Clinical relevance: These findings may lead to reduced operative time and decreased tendon damage with superior results. [ABSTRACT FROM AUTHOR]

Stemless humeral fixation has become an alternative to traditional total shoulder arthroplasty, but metaphyseal fixation may be compromised by the quality of the trabecular bone that diminishes with age and disease, and augmentation of the fixation may be desirable. The authors hypothesized that a bone graft substitute (BGS) could achieve initial fixation comparable to polymethylmethacrylate (PMMA) bone cement. Fifteen fresh-frozen human male humerii were randomly implanted using a stemless humeral prosthesis, and metaphyseal fixation was augmented with either high-viscosity PMMA bone cement (PMMA group) or a magnesium-based injectable BGS (OsteoCrete; Bone Solutions Inc, Dallas, Texas) (OC group). Both groups were compared with a control group with no augmentation. Initial stiffness, failure load, failure displacement, failure cycle, and total work were compared among groups. The PMMA and OC groups showed markedly higher failure loads, failure displacements, and failure cycles than the control group (P<.01). There were no statistically significant differences in initial stiffness, failure load, failure displacement, failure cycle, or total work between the PMMA and OC groups. The biomechanical properties of magnesium-based BGS fixation compared favorably with PMMA bone cement in the fixation of stemless humeral prostheses and may provide sufficient initial fixation for this clinical application. Future work will investigate the long-term remodeling characteristics and bone quality at the prosthetic-bone interface in an in vivo model to evaluate the clinical efficacy of this approach., (Copyright 2015, SLACK Incorporated.)