Search

The galvanic interaction between pyrite and galena surface has been investigated using density functional theory (DFT) method. The calculated results show that galvanic interactions between pyrite and galena surface are decreased with the increase of contact distance. The galvanic interactions still occurs even the distance larger than the sum of two atoms radius (≈2.8 Å), and the limit distance of galvanic interaction between galena and pyrite surface is about 10 Å, which is consistent with the quantum tunneling effect. Through Mulliken charge population calculation, it is found that electrons transfer from galena to pyrite. For galena surface, Pb 6s and 6p states lose electrons and S 3p state loses a small amount of electrons, which causes the electron loss of galena. For pyrite surface, Fe 4p state obtains large numbers of electrons, resulting in the decrease of positive charge of Fe atom. However, the 3p state of S atom loses a small numbers of electrons. The reactivity of mineral surface has also been studied by calculating the frontier orbitals of minerals. Results suggest that the highest occupied molecular orbital (HOMO) coefficients of galena are increased whereas those of pyrite are decreased with the enhancing galvanic interaction, indicating that the oxidation of galena surface would be enhanced due to the galvanic interaction. The Fukui indices and dual descriptor values of surface atoms suggest that the nucleophilicity of the galena surface increases, meanwhile, the electrophilicity of pyrite surface increases with the decrease of the contact distance. In addition, the density of states (DOS) of atoms results show that the activity of electrons in Pb 6s and 6p orbitals enhances while the activity of electrons in Fe 3d orbitals weaken due to the galvanic contact between minerals. [ABSTRACT FROM AUTHOR]

The influences of Ag, Bi, Sb and Zn impurities on the electrochemical adsorption of butyl xanthate on a galena surface were investigated. The impurity-doped and pure galena samples were synthesised by chemical precipitation and tested by X-ray diffraction (XRD) analyses. The flotation results suggest that the Ag and Bi impurities can promote the flotation of galena, while the Zn and Sb inhibit it. Both the lead- and impurity-xanthate are observed on the galena surface by infrared spectra, which suggests that the impurities on galena surface also interact with xanthate. However, Ag-xanthate and Bi-xanthate at the galena surface doped Ag or Bi may need to be further verified. The cyclic voltammetric measurements on galena microelectrodes reveal two oxidation peaks for both the pure and impurity-doped PbS, while no obvious reduction peaks are observed. It is found that the presence of Ag and Bi enhances the oxidation of xanthate on the galena surface, while the Zn and Sb impurities inhibit the oxidation of xanthate on the galena surface. The amount of electrochemically adsorbed xanthate on the galena surface varies based on the type of impurity and has a positive correlation with the flotation recovery of galena. [ABSTRACT FROM AUTHOR]

Pyrite is a mineral often associated with coal in coal seams and is a major source of sulfur in coal. Coal–pyrite is widely distributed, easily available, low-cost, and non-toxic, and has high light absorption coefficient. So, it shows potential for various applications. In this paper, the density-functional theory (DFT + U) is used to construct coal–pyrite with carbon doped in the sulfur and iron vacancies of pyrite. The effects of different carbon defects, different carbon doping concentrations, and different doping distributions in the same concentration on the electronic structure and optical properties of coal–pyrite were studied. The results show that the absorption coefficient and reflectivity of coal–pyrite, when its carbon atom substitutes the iron and sulfur atoms in the sulfur and iron vacancies, are significantly higher than those of the perfect pyrite, indicating that coal–pyrite has potential for application in the field of photovoltaic materials. When carbon is doped in the sulfur vacancy, this impurity state reduces the width of the forbidden band; with the increase in the doping concentration, the width of the forbidden band decreases and the visible-light absorption coefficient increases. The distribution of carbon impurities impacts the band gap but has almost no effect on the light absorption coefficient, complex dielectric function, and reflectivity, indicating that the application of coal–pyrite to photovoltaic materials should mainly consider the carbon doping concentration instead of the distribution of carbon impurities. The research results provide a theoretical reference for the application of coal–pyrite in the field of photoelectric materials. [ABSTRACT FROM AUTHOR]

Effects of carbon chain length, carbon chain isomerism, C C double bonds number on fatty acid adsorption on FAP (0 0 1) surface have been investigated based on DFT. The results revealed that fatty acid collector can form stable adsorption configuration at Ca1 (surf) site. Chemical adsorption was formed between O (mole) of fatty acid collector and the Ca1 (surf) of fluorapatite (0 0 1) surface; hydrogen bond adsorption was formed between the H (mole) of fatty acid and the O (surf) of-[PO 4 ]- of FAP (0 0 1) surface. Fatty acid collectors and FAP (0 0 1) surface are bonding by means of the hybridization of O (mole) 2p and Ca (surf) 4d orbitals, H (mole) 1s and O (surf) 2p orbital. The analysis of adsorption energy, DOS, electron density, Mulliken charge population and Mulliken bond population revealed that with the carbon chain growing within certain limits, the absolute value of the adsorption energy and the overlapping area between the DOS curve of O (mole) and Ca (surf) was greater, while that of H (mole) 1s and O (surf) 2p basically remained unchanged. As C C double bonds of fatty acids increased within certain limits, the adsorption energy and the overlapping area between the state density curve of O (mole) and Ca (surf), H (mole) and O (surf) basically remained unchanged. The substituent groups of fatty acid changed, the absolute value of the adsorption energy and the overlapping area between the state density curve had a major change. The influence of fatty acids adsorption on FAP (0 0 1) surface depends mainly on the interaction between O (mole) and Ca (surf). [ABSTRACT FROM AUTHOR]

The adsorption of surfactants on a solid surface could alter its wettability, which offers a wide range of relevant applications such as mineral flotation, hydrophobic material preparation and nanomaterial dispersion. The morphology of adsorbed oleate on a collophane surface was visualized using the peakforce tapping mode of atomic force microscopy (AFM), and its effect on the wettability of collophane was analysed by contact angle measurements, adsorption measurements and molecular dynamics (MD) simulations. The AFM images demonstrated that the adsorbed structure varied with different oleate concentrations. First, the small cylindrical micelles with concomitant monolayer and bilayer structures were observed above the hemimicelle concentration ( hmc ) of 1 × 10 −5  mol/L, which enhanced the hydrophobicity of the collophane surface, and the collophane surface was not completely covered with the oleate monolayer due to surface heterogeneity. Then, large cylindrical micelles with a major bilayer were formed as the critical micelle concentration ( cmc ) of 1 × 10 −3  mol/L was approached, which decreased its hydrophobicity, and finally the formation of large cylindrical micelles with multilayer at the cmc caused the hydrophilicity of the collophane surface. Therefore, there was a suitable equilibrium concentration between the hmc and cmc for oleate as a collector during mineral flotation, and oleate could also be used as a dispersant for colloidal stability when its equilibrium concentration reached the cmc. The effect of the adsorbed structure on the wettability of collophane was also confirmed by MD simulations. This study provides a good understanding of the surface modification of particles by surfactants for flotation and dispersion applications. [ABSTRACT FROM AUTHOR]

Pyrite is the most common sulfide in nature, and it is well-known for its roles in acid mine drainage, flotation separation of useful metal (Cu, Pb, Zn, and Mo) sulfide minerals, optoelectronic and photovoltaic application, pneumoconiosis, and even in the origin of life. However, the detailed oxidation behaviors of pyrite are still unclear and not well-understood. New oxidation pathways by O 2 on the pyrite (100) surface have been found in this work for the first time using density functional theory simulation; that is, besides Fe sites, S sites are also possible oxidation sites in the initial oxidation state of pyrite, where easier and stronger oxidation may occur. This is the first time to confirm the other researchers' conjecture on the direct oxidation of S sites, which explains the isotopic composition experiments that a minor amount of O 2 is permanently incorporated into SO 4 2- during pyrite oxidation (O in SO 4 2- is mainly derived from water). We constructed various H 2 O-O 2 coadsorption models on the pyrite surface by considering the adsorption sequence of H 2 O and O 2 . It is found that the H 2 O molecule undergoes step-wise dissociation in the presence of the O 2 molecule. Hydroxyl radical •OH is the reactive oxygen species during H 2 O dissociation. Cyclic voltammetric measurements confirm the presence of •OH. In addition, H 2 O 2 may also be formed on the surface in terms of H 2 O-then-O 2 sequence adsorption.