Search

This study delves into the intricacies of ultraprecision machining, particularly in the context of machining optical freeform surfaces using Diamond Turning Machines (DTMs). It underscores the dynamic relationship between toolpath generation, hydrostatic bearing in DTMs, and the machining process. Central to this research is the innovative introduction of Metal Matrix Composites (MMCs) to replace the traditional materials used in designing linear bearings. This strategic substitution aims to dynamically enhance both the accuracy and the quality of the machined optical freeform surfaces. The study employs simulation-based analysis using ADAMS to investigate the interfacial cutting forces at the tooltip and workpiece surface and their impacts on the machining process. Through simulations of STS mode ultraprecision machining, the interfacial cutting forces and their relationship with changes in surface curvatures are examined. The results demonstrate that the use of MMC material leads to a significant reduction in toolpath pressure, highlighting the potential benefits of employing lightweight materials in improving the dynamic performance of the system. Additionally, the analysis of slideway joints reveals the direct influence of interfacial cutting forces on the linear slideways, emphasising the importance of understanding and controlling these forces for achieving higher-precision positioning and motion control. The comparative analysis between steel and MMC materials provides valuable insights into the effects of material properties on the system's dynamic performance. These findings contribute to the existing body of knowledge and suggest a potential shift towards more advanced precision forms, possibly extending to pico-engineering in future systems. Ultimately, this research establishes a new standard in the field, emphasising the importance of system dynamics and interfacial forces in the evolution of precision manufacturing technologies. [ABSTRACT FROM AUTHOR]

This study focuses on the analysis of a linear hydrostatic bearing using harmonic frequency response and harmonic response simulations. The aim is to evaluate the feasibility of replacing the existing alloy steel material with a metal matrix composite (MMC) in terms of its performance and dynamic characteristics for both the base and carriage parts. The simulation results indicate that the MMC material exhibits higher resonant frequencies and improved damping capabilities compared to the structural steel material. The higher resonant frequencies observed in the MMC material are attributed to its stiffness and structural properties. These properties contribute to increased natural frequencies and improved vibration damping characteristics. This suggests that incorporating the MMC material in the bearing design could enhance motion control, improving the ability to precisely control and manipulate the movement of components or systems. In the context of ultraprecision machining applications, incorporating the MMC material in the hydrostatic bearing design can also lead to a more accurate and controlled motion, resulting in improved precision and finer machining outcomes. The displacement analysis confirms that both materials meet the specifications provided by the manufacturer, supporting the viability of using MMC as an alternative. However, further experimental validation and considerations of material feasibility, manufacturing factors, and cost-effectiveness are necessary before implementing the MMC material in practical applications. Overall, this research highlights the potential benefits of MMC in the design of linear hydrostatic bearings, paving the way for enhanced performance in ultraprecision machining processes. [ABSTRACT FROM AUTHOR]

This article presents an innovative approach to toolpath generation for ultraprecision machining of freeform optic surfaces based on the principle of Automatic Dynamics Analysis of Mechanical Systems. As components with freeform surfaces often have non-rotational symmetry, there are potential challenges facing their ultraprecision machining through single-point diamond turning, such as the projected points in complex large sag surfaces, which likely find it difficult to communicate with the control system and, thus, do not perform successfully. In ultraprecision machining, to achieve the highest performance in freeform surface resolution, the factors of dynamics, material and mechanical stiffness, frictions, tooling and accuracy of the servo component should be considered. The investigation is focused on an integrated approach and the associated scientific understanding of precision engineering design, ultraprecision machining and metrology of freeform surfaces as well as their application perspective. In this approach, the toolpath for very complex freeform surfaces can be generated using the Newton–Raphson method to solve the kinematics and dynamics equations of motion. The effect of friction and contact force are also investigated for accurate toolpath curve generation. Moreover, the Gear stiff (GSTIFF)/ Wielenga stiff (WSTIFF) integrator for solving the non-linear equations of motion is employed, and the result shows the time step size, playing a critical role in generating toolpath curves with a higher accuracy and resolution. [ABSTRACT FROM AUTHOR]

Lake Urmia (LU) once was the second largest hypersaline lake in the world, covering up to 6000 km 2 , but has undergone catastrophic desiccation in recent years resulting in loss of 90% of its area and extensive coverage by playas and marshlands that represent a source of salt and dust. This study examines daily Aerosol Optical Depth (AOD) data from the Moderate Resolution Imaging Spectroradiometer (MODIS) between 2001 and 2015 over northwestern Iran, which encompasses LU. Intriguingly, salt emissions from the LU surface associated with ongoing desiccation do not drive the study region's AOD profile, whereas pollution transported from other regions and emissions around LU are more important. Signatures of increasing local crustal emissions are most evident outside of the peak dust season (January, February, and October) and on the periphery of LU. AOD has generally increased in the latter half of the study period with the onset of the AOD ramp-up starting a month earlier in the spring season when comparing 2009–2015 versus earlier years. Results indicate that suppression of emissions on the LU border is critical as the combined area of salt and salty soil bodies around LU have increased by two orders of magnitude in the past two decades, and disturbing these areas via activities such as grazing and salt harvesting on the lake surface can have more detrimental impacts on regional pollution as compared to benefits. These results have important implications for public health, climate, the hydrological cycle, and pollution control efforts. [ABSTRACT FROM AUTHOR]