Search

Hot rolling in the process chain of aluminum-rolled products presents the critical element of material quality and influences productivity. To increase the letter demand modifications of hot rolling, the consequential changes of microstructure, crystallographic texture, and mechanical and formability properties must be acknowledged and consistently considered when planning the rolling process and rolled product. Achieving lower thicknesses of the hot-rolled band would enable fewer passes with cold rolling; consequently, hot rolling with the same number of passes can be completed with lower temperatures. Microstructural and texture characterizations conducted using the light microscope and scanning electron microscope, respectively, of the 3.25 mm hot-rolled band revealed that the smaller grains appeared in the center of the cross-section, unlike for the 6 mm hot-rolled band, where smaller grains were detected on the top and bottom positions of the cross-section. Furthermore, the comparison also shows that the 6 mm hot-rolled band had 64% of random texture components and 83% of recrystallized grains, whereas the proportional adjustment for the 3.25 mm hot-rolled band had 42% of random texture components and 55% of recrystallized grains. For the mechanical testing results, the elongation values in rolling and transverse directions significantly differ only in the case of a hot-rolled band of 3.25 mm. Consequently, the earing results are more than 1.5% higher for the 3.25 mm hot-rolled band, than the 6 mm hot-rolled band. [ABSTRACT FROM AUTHOR]

Simple Summary: Rampant use of growth-promoting antibiotics in the poultry industry has resulted in enhanced harmful concentrations in livestock products ushering in the evolution of multidrug resistance strains. Plant feed additives are being explored, and among them, Chinese chives (CC), which contain various phytonutrients, can offer a promising alternative. We performed a comparative study to examine the effects of non-fermented and fermented CC feed additives on broiler productivity, chicken meat quality, blood composition, intestinal properties, and gut microbiota. We observed a high broiler productivity for the treatment group subjected to fermented CC juice on par with growth-promoting antibiotics. Fermented CC juice influenced low cholesterol content in the broilers while inhibiting the growth of intestinal pathogens. The present study explores the application of CC juice as a suitable feed additive and alternative to conventional antibiotics. We performed a comparative study to investigate the effects of non-fermented and fermented CC juice on broiler productivity, meat quality, blood characteristics, intestinal characteristics, and microbiota associated with intestinal characteristics. A total of 800 one-day-old Ross 308 broiler chickens were randomly assigned to one of the four dietary treatment groups: (1) basal diet (negative control; NC); (2) basal diet + 0.01% enramycin (positive control; PC); (3) basal diet + 3% non-fermented CC juice (NCC; CC juice 10%, water 90%); and (4) basal diet + 3% fermented CC juice (FCC; CC juice 10%, water 90%, Lactobacillus plantarum SK4719). Feed and water were provided ad libitum. Intriguingly, all treatments showed similar results in terms of broiler productivity and chicken meat quality. Considering organ characteristics, the FCC group showed a low spleen weight and lower (p < 0.05) blood levels of AST and total cholesterol (TCHO). Regarding intestinal characteristics, the CC feed additive (NCC and FCC) resulted in a heavier intestinal weight (p < 0.05) without affecting the length ratio of the villi or the crypt compared to the control (NC or PC). NCC and FCC lowered the growth of intestinal pathogens (p < 0.01). In summary, the addition of FCC can maintain poultry health by improving blood compositions and inhibiting the growth of intestinal pathogens, leading to a productivity comparable to that of poultry treated with growth-promoting antibiotics. [ABSTRACT FROM AUTHOR]

Systematic evolution of ligands by exponential enrichment (SELEX) is a method that is generally used for developing aptamers, which have arisen the promising alternatives for antibodies. However, conventional SELEX methods have limitations, such as a limited selection of target molecules, time-consuming and complex fabrication processes, and labor-intensive processes, which result in low selection yields. Here, we used (i) graphene oxide (GO)-coated magnetic nanoparticles in the selection process for separation and label-free detection and (ii) a multilayered microfluidic device manufactured using a three-dimensionally printed mold that is equipped with automated control valves to achieve precise fluid flows. The developed on-chip aptamer selection device and GO-coated magnetic nanoparticles were used to screen aptamer candidates for adenosine in eight cycles of the selection process within approximately 2 h for each cycle. Based on results from isothermal titration calorimetry, an aptamer with a dissociation constant of 18.6 ± 1.5 μM was selected. Therefore, the on-chip platform based on GO-coated magnetic nanoparticles provides a novel label-free screening technology for biosensors and micro/nanobiotechnology for achieving high-quality aptamers. [ABSTRACT FROM AUTHOR]

Simple Summary: This study investigated the probiotic characteristics of Paenibacillus konkukensis and its dietary effects on growth performance, intestinal characteristics, intestinal microbiota, and meat quality in broilers. Through this study, P. konkukensis showed non-hemolytic activity, variable antibiotic susceptibility, and moderate acid and bile tolerance. Supplementary feeding of P. konkukensis as bacterial culture did not affect the growth performance parameters and meat quality, with positive effects on meat yield and intestinal microflora. Overall, dietary P. konkukensis may not have any adverse effects and might be considered as a probiotic feed additive in poultry. This study evaluates the in vitro probiotic characteristics of P. konkukensis sp. nov. SK-3146, which was isolated from animal feed, and its dietary effects on growth performance, intestinal characteristics, intestinal microbiota, and meat quality in broilers. In vitro experiments revealed that P. konkukensis was non-hemolytic with variable antibiotic susceptibility, and acid as well as bile tolerance. To assess the effect of P. konkukensis on broilers, a total of four hundred eighty 1-day-old Ross 308 broiler chicks were allocated to 3 treatment groups with 4 replicates of 40 birds each; the negative control group was fed a basal diet without any feed additives (NC), the positive control group was fed a basal diet containing 0.01% enramycin (PC), and the experimental group was fed a basal diet containing P. konkukensis bacterial culture (PK) at 104 CFU/g of the diet based on bacterial count. The experiment lasted for 35 days. Results indicated that there were no significant differences in any growth performance parameters among the dietary treatments (p > 0.05). In addition, the inclusion of P. konkukensis in the broilers' diet did not affect meat cooking loss, color, and pH but increased the relative weight of breast meat (p < 0.05). The PK group showed heavier intestinal weight and shorter intestinal length than the NC group (p < 0.05). The ratio of the intestinal weight to length of jejunum was the highest in the PK group (p < 0.05). The PK group showed increased counts of Streptococcus thermophilus (p < 0.05) with no adverse effects of P. konkukensis on other intestinal microbiota in the jejunum. This study implies that P. konkukensis might have the potential to be applied as a probiotic feed additive in poultry. [ABSTRACT FROM AUTHOR]

We conducted large‐scale screening test on drugs that were already approved for other diseases to find pigmentation‐modulating agents. Among drugs with potential for pigmentation control, we selected sorafenib and further investigated the effect on pigmentation using HM3KO melanoma cells. As a result of treating melanoma cells with sorafenib, pigmentation was promoted in terms of melanin content and tyrosinase activity. Sorafenib increased mRNA and protein levels of pigmentation‐related genes such as MITF, tyrosinase and TRP1. To uncover the action mechanism, we investigated the effect of sorafenib on the intracellular signalling pathways. Sorafenib reduced phosphorylation of AKT and ERK, suggesting that sorafenib induces pigmentation through inhibition of the AKT and ERK pathways. In addition, sorafenib significantly increased the level of active β‐catenin, together with activation of β‐catenin signalling. Mechanistic study revealed that sorafenib decreased phosphorylation of serine 9 (S9) of GSK3β, while it increased phosphorylation of tyrosine 216 (Y216) of GSK3β. These results suggest that sorafenib activates the β‐catenin signalling through the regulation of GSK3β phosphorylation, thereby affecting the pigmentation process. [ABSTRACT FROM AUTHOR]

Abstract Skin color is determined by the melanin pigments that are produced in melanocytes then transferred to surrounding keratinocytes. Despite the growing number of commercial products claiming the pigmentation-regulatory effects, there is still a demand for the development of new materials that are safe and more efficacious. We tried to screen the pigmentation-regulatory materials using a commercially available drugs, and found that nilotinib could induce pigmentation in melanoma cells. When HM3KO melanoma cells were treated with nilotinib, melanin content was increased together with increase of tyrosinase activity. Nilotinib increased the expression of pigmentation-related genes such as MITF, tyrosinase and TRP1. Consistent with these results, the protein level for MITF, tyrosinase, and TRP1 was significantly increased by nilotinib. To delineate the action mechanism of nilotinib, we investigated the effects of nilotinib on intracellular signaling. As a result, nilotinib decreased the phosphorylation of AKT, while increased the phosphorylation of CREB. The pretreatment of PKA inhibitor H89 markedly blocked the nilotinib-induced phosphorylation of CREB. In accordance with, pretreatment of H89 significantly inhibited the nilotinib-induced pigmentation, indicating that nilotinib induces pigmentation via the activation of PKA signaling. Together, our data suggest that nilotinib can be developed for the treatment of hypopigmentary disorder such as vitiligo. Highlights • The nilotinib induced the pigmentation of HM3KO melanoma cells. • The nilotinib decreased the phosphorylation of AKT, while increased the phosphorylation of CREB. • The inhibition of PKA signaling abrogated nilotinib-induced pigmentation. [ABSTRACT FROM AUTHOR]

Melanin pigments are the primary contributors for the skin color. They are produced in melanocytes and then transferred to keratinocytes, eventually giving various colors on skin surface. Although many depigmenting and/or skin-lightening agents have been developed, there is still a growing demand on materials for reducing pigmentation. We attempted to find materials for depigmentation and/or skin-lightening using the small molecule compounds commercially available, and found that 5-iodotubercidin had inhibitory potential on pigmentation. When HM3KO melanoma cells were treated with 5-iodotubercidin, pigmentation was dramatically reduced. The 5-iodotubercidin decreased the protein level for pigmentation-related molecules such as MITF, tyrosinase, and TRP1. In addition, 5-iodotubercidin decreased the phosphorylation of CREB, while increased the phosphorylation of AKT and ERK. These data suggest that 5-iodotubercidin inhibits melanogenesis via the regulation of intracellular signaling related with pigmentation. Finally, 5-iodotubercidin markedly inhibited the melanogenesis of zebrafish embryos, an in vivo evaluation model for pigmentation. Together, these data suggest that 5-iodotubercidin can be developed as a depigmenting and/or skin-lightening agent. [ABSTRACT FROM AUTHOR]

Background Wnt/β-catenin signaling is important in development and differentiation of melanocytes. Objective The object of this study was to evaluate the effects of several Wnt/β-catenin signaling inhibitors on pigmentation using melanoma cells. Methods Melanoma cells were treated with Wnt/β-catenin signaling inhibitors, and then melanin content and tyrosinase activity were checked. Results Although some inhibitors showed slight inhibition of pigmentation, we failed to observe potential inhibitory effect of those chemicals on pigmentation of HM3KO melanoma cells. Rather, one of powerful Wnt/β-catenin signaling inhibitors, ICG-001, increased the pigmentation of HM3KO melanoma cells. Pigmentation-enhancing effect of ICG-001 was reproducible in other melanoma cell line MNT-1. Consistent with these results. ICG-001 increased the expression of pigmentation-related genes, such as MITF, tyrosinase and TRP1. When ICG-001 was treated, the phosphorylation of CREB was significantly increased. In addition, ICG-001 treatment led to quick increase of intracellular cAMP level, suggesting that ICG-001 activated PKA signaling. The blockage of PKA signaling with pharmaceutical inhibitor H89 inhibited the ICG-001-induced pigmentation significantly. Conclusions These results suggest that PKA signaling is pivotal in pigmentation process itself, while the importance of Wnt/β-catenin signaling should be emphasized in the context of development and differentiation. [ABSTRACT FROM AUTHOR]

Voice over Internet Protocol (VoIP) is an emerging communication service that has advanced in ubiquitous computing environments. Although VoIP is inexpensive and offers additional services, there has been little provision for attacks at the weak points. With the advances of Wireless Sensor Network (WSN) technologies, the risk is increasing. Due to the resource constraints of WSN, attacks have become easier, making protection of the network more difficult. In this work, we attempt to distinguish fraud call attacks as outliers from normal calls on the basis of call detail records. We adopted and applied a Local Outlier Factor (LOF) method on real call data, which include actual fraud call attacks. Our results show the outlier detection method can be effective in detecting fraud calls. Moreover, introducing two additional attributes related to fraud call characteristics enhanced the detection performance. [ABSTRACT FROM AUTHOR]

Dynamic recrystallization (DRX) of 99.9999% aluminum single crystal at room temperature was examined under frictionless deformation mode. To exclude the self-heating of the specimen due to applied high strain, a microcrack that localizes the stress at a very small region was intentionally introduced by controlled local necking. For the in situ observation of DRX, a specially designed in situ microdeformation device was positioned inside an electron backscattered diffraction system chamber. Recrystallized grains showed relatively random texture and preferred growth direction. The subgrains with low-angle grain boundaries formed by dynamic recovery transformed into small grains with high-angle grain boundaries, acting as nuclei for discontinuous dynamic recrystallization and growing by further deformation. The DRX in pure aluminum can take place under frictionless tensile deformation conditions at room temperature, and the stress localization and high purity are key issues for the DRX of aluminum at room temperature. [ABSTRACT FROM AUTHOR]

Understanding the wear behavior of Cu-based brake pads, which are used in high-speed railway trains and aircraft, is essential for improving their design and safety. Therefore, the wear mechanism of these pads has been studied extensively. However, most studies have focused on the changes in their composition and not the effects of their manufacturing conditions. In this study, we fabricated commercial Cu-based brake pads containing Fe, graphite, Al2O3, and SiO2 using spark plasma sintering under different conditions. The microstructures and mechanical properties of the pads were investigated. The pads were tribo-evaluated using the ball-on-disc test under various load conditions. Their worn surfaces were analyzed using X-ray diffraction analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and confocal microscopy in order to elucidate their wear mechanism. In addition, the dynamometer test was performed to confirm whether their wear behavior would be similar under actual conditions. Finally, a comparative analysis was performed using the ball-on-disc test. The results indicated that the brake pads with the same composition but fabricated under different sintering conditions exhibited different wear characteristics. We believe that this research is of great significance for understanding the wear mechanism of Cu-based brake pads and improving their design and hence their performance. [ABSTRACT FROM AUTHOR]

Whether osteoarthritis (OA) is associated with alterations in the epigenetic status of anabolic factors is largely unknown. To answer the question, we investigated the DNA methylation and histone modification of SOX-9 gene promoter, a typical anabolic gene, in the articular cartilage from nine patients with femoral neck fractures without OA and from nine hip OA patients. Methylation-specific PCR (MSP) and bisulfite sequencing analysis (BSQ) showed that the methylation of SOX-9 promoter was increased in OA cartilage compared to normal cartilage. The decreased SOX-9 gene and protein expression in OA chondrocytes was reversed by the treatment of 5-azacytidine (5-AzaC), the demethylating agent. Methylation of SOX-9 proximal promoters reduced the binding affinity of transcription factors CCAAT-binding factor/nuclear factor-Y and cyclic adenosine monophosphate (cAMP) response element-binding. There was a significant increase in H3K9 and H3K27 trimethylation and a significant decrease in the acetylation of H3K9, 15, 18, 23, and 27 at SOX-9 promoters in OA chondrocytes. These findings suggest that hip OA is associated with a change in the epigenetic status of SOX-9 promoter, including increased DNA methylation and altered histone modification. © 2013 American Society for Bone and Mineral Research. [ABSTRACT FROM AUTHOR]

Supercritical CO2 (ScCO2) can dissolve organic materials easily just by changing temperature and pressure. This property of ScCO2 can be applied to extract some ScCO2-philic organic molecules from matrix material. The ScCO2 was used to generate the meso/macro double porous structure of polyimide/polysilsesquioxane (PI/PSSQ) hybrid film. The morphology of the porous structure was measured by scanning electron microscope (SEM). Here, we demonstrate that the ScCO2 could penetrate into the hybrid thin film and take away the small molecules, which are the by-product (CO2) from the imidization reaction of the PI segment and the solvent remained in the PSSQ segment by sol-gel process. [ABSTRACT FROM AUTHOR]

A novel synthetic process for multi-porous polyimide(PI)/poly(methyl silsesquioxane)(PMSSQ)hybrid material has been studied via supercritical CO 2 technology. The end groups of PI precursors were modified by coupling agent to be hybridized with alkoxysilanes and became PMSSQ precursors. PI/PMSSQ hybrid precursor solution was spun on a silicon wafer substrate for film formation. The PI precursor segment was imidized and micro-pores were developed by removal of by-product, CO 2 via supercritical CO 2 media. The PMSSQ precursor segment was cured and nano-pores were generated by supercritical extraction. Average micro-pore size and nano-pore size were 10&ThickSpace;μm and 40&ThickSpace;nm respectively. The dielectric constant of the multi-porous PI/PMSSQ hybrid film was calculated to 2.5. [ABSTRACT FROM AUTHOR]

Active brazing of zirconia with metallic alloys is a promising method for enhancing the mechanical property of zirconia. However, the brazing process of zirconia and metallic alloys has not been studied in detail because of a limitation in selection of materials and processing conditions. Here, we successfully brazed zirconia with Ti-3Al-2.5V alloy using amorphous Zr54Ti22Ni16Cu8 active filler alloy. By manipulating the brazing temperature from 800 °C to 860 °C, a highest strength of ~186 MPa was achieved at 860 °C. Reduced brittle (Zr,Ti)2(Ni,Cu) intermetallic phases from formation of island-type (Zr,Ti) matrix, ZrO2-X, TiO, and TiO2 interlayer play a key role in increasing the joint strength. Our findings will be helpful in developing brazing processes for zirconia and metallic alloys. [ABSTRACT FROM AUTHOR]