Search

This paper presents the filamentary structure of the pinched column in a smaller plasma focus device filled with deuterium. The deflections were observed using schlieren and differential interferometry techniques. The observed filaments have a transverse diameter of 40–200 μm, which could be interpreted based on the electric current hypothesis as local concentrations of electric current. The evolution of filaments was compared with global structures recorded by extra ultraviolet frames. These results provide a basis for considering the possibility of a filamentary composition of the poloidal current in compact structures. The model of filaments with a helical shape of electrical current may be able to explain the central narrow and dense cord in the axis of the column, the different lifetimes of the structures, and the submillimeter sources of fast electrons and ions. [ABSTRACT FROM AUTHOR]

The analysis of Z-pinch implosion dynamics plays one of the most important roles in the study of pulsed power discharges. At the same time, it is difficult to determine the density distribution together with the current density (current coupling to the imploding layer) to provide more detailed information about the dynamics. Numerical simulations can now provide high-resolution results that are almost unattainable in experiments. The challenge, however, is to obtain reliable results that are close enough to the experimental data to describe individual physical phenomena. In this paper, we show that it is possible to use a combination of experimental data and magnetohydrodynamic (MHD) simulations to verify and identify the physical processes during the stagnation of a Z-pinch. We focus on the analysis of the density profile from experimental data of the mega-ampere plasma focus PF-1000 and its reconstruction using an extended MHD code. Thanks to multi-frame interferometry, we recorded a total of 29 interferometric images of two shots, each in a 200 ns time window around the pinch phase. We were then able to obtain density profiles and observe the reflection of the shock wave from the axis. By the appropriate choice of initial conditions and boundary values in the simulation, we were able to obtain reasonable agreement with the experimental values. We also evaluated the possible shortcomings of the 1D simulation, such as mass loss and current flow at the periphery. [ABSTRACT FROM AUTHOR]

The neutron and x-ray production is investigated in various pulse-power devices for a deeper understanding of the ion and electron acceleration mechanisms and the application of pulsed neutron sources. We present the extensive results from an anode shape experiment carried out on the PFZ-200 plasma focus device. The various shapes of anodes were tested, including cylinders, tapers, or rounded tips. The experimental shots with a peak current above 200 kA were performed in pure deuterium working gas at 280–600 Pa pressure to obtain maximal neutron yield for each anode shape. The average neutron yields are in the range of (1–2) ×108 neutrons/shot. Outstanding findings about x-ray emission were obtained with the group of tapered anode tips. Using the scintillation detectors shielded by 5 cm thick lead bricks, we obtained the hard x-ray signals with photons exceeding 600 keV energy. Such relatively high x-ray energy indicates the optimized conditions for electron and ion acceleration. At the same time, the individual shots have been well reproducible. Therefore, we were able to study plasma dynamics with the schlieren images taken at different times at different shots. [ABSTRACT FROM AUTHOR]

Filament-like structures were observed during discharges in a small 3-kJ plasma focus device operated with pure deuterium. These structures were recorded by means of two different laser diagnostic techniques: a schlieren system and a differential laser interferometry. They present the novel fine-scale (submillimeter) plasma structures recorded during the radial implosion, at the pinch stagnation, at the development of instabilities, and during a decay of the dense plasma column, when hard x-rays and fusion-produced neutrons were generated. The temporal uncertainty of these observations was about 2 ns, and the spatial one amounted to 40 μm. The filamentation seems be a natural and spontaneous process which occurs in high-current, hot, and dense plasmas produced in plasma focus devices. The observed filaments have usually longitudinal and/or azimuthal orientations. Their higher plasma density and appearance in regions of the measured and assumed current flows can be interpreted as the formation of plasma-current filaments with concentrated magnetic energy. These filamentary effects should be studied due to their possible role during the evolution of instabilities and the formation of small sources emitting fast electrons and ions. [ABSTRACT FROM AUTHOR]

Fifteen-frames interferometric diagnostics at the PF-1000 facility was enhanced by adding four frames of the schlieren diagnostics and by splitting of four channels in the optical delay line. This setup enabled the visualization of gradients in the plasma density perpendicular to the direction of the diagnostic laser beam, and their relationship with larger structures visualized by using laser interferometry. The schlieren pictures showed filamentary structures of submillimeter 200–300 μm diameter in shots performed with pure deuterium filling. Filaments were observed in a thin (millimeter-thick) lateral-boundary layer, in lobules, and in internal fast transforming regions of the dense plasma column. Their high-density gradients and location in the regions of recorded (or inferred) currents indicated local concentrations of the magnetic field and current distribution. Millimeter- and submillimeter-size sources of fast charged particles, which were identified in the recorded ion pinhole pictures, have been conjectured to be a manifestation of high local concentrations of the magnetic energy. [ABSTRACT FROM AUTHOR]

Dynamics of the implosion of the dense plasma focus play an essential role in converting electrical energy into the kinetic energy of the current sheath and subsequent production of accelerated electrons, ions, hard X-ray, and neutron emission. This paper presents the analysis of the implosion parameters, such as the implosion velocity and imploding mass, coupled with electrical parameters observed on the PF-1000 facility with a modified electrode system. The first two parameters are based on the 16-frame Mach–Zehnder interferometer, which provides the spatial distribution of electron density in a time sequence. Measurement of the total current, current derivative, and voltage enables us to evaluate the total inductance and kinetic energy driven by the capacitor bank. Then comparing the inductances and kinetic energies evaluated from the interferograms and electrical waveforms can provide more precise information on the current flowing in the imploding sheath. We present a possible way to deal with the fact that only part of the total current flows through the imploding layer. With the supposition that the rest of the current flows close to the insulator, we conclude that roughly 70% of the total current flows through the pinch, which is in good agreement with an input parameter of the Lee model, for example. [ABSTRACT FROM AUTHOR]

This paper concerns the correlation of hard x-ray and neutron signals, which were recorded with scintillation detectors oriented in the axial and radial directions, in a comparison with interferometric and extreme-ultraviolet radiation frames, as recorded within the plasma focus (PF)-1000 facility operated with a deuterium filling. The considered signals showed two different phases. In the initial phase, the fusion neutrons are mainly produced by deuterons moving dominantly downstream during the disruption of a pinch constriction (lasting tens nanoseconds). In the later phase (usually after about 100 ns), the fusion neutron emission reaches its maximum in the radial directions. This emission (lasting 100–200 ns) is caused by the fast deuterons moving in both the downstream and radial directions. It correlates usually with a decay of dense plasma structures in remnants of the expanding pinch column. This can be explained by a decay of internal magnetic fields. The neutron signal is usually composed of several sub-pulses of different energies. It was deduced that the primary deuterons producing the observed fusion neutrons undergo a regular and repeated temporal, directional, and energy evolution. [ABSTRACT FROM AUTHOR]

In our earlier papers it was demonstrated that the plasma pressure decreases with the growing atomic number of the target material. In this context a question arose about the possibility to collimate the Al plasma outflow by using the plastic plasma as a compressor. For that purpose a plastic target with an Al cylindrical insert of 400 μm in diameter was used. The experiment was carried out at the PALS laser facility. The laser provided a 250 ps (FWHM) pulse with the energy of 130 J at the third harmonic frequency (λ3 = 0.438 μm). The focal spot diameters (ΦL) 800, 1000, and 1200 μm ensured predominance of the plastic plasma, its transversal extension being large enough for the effective Al plasma compression. To study the Al plasma stream propagation and its interaction with the plastic plasma, a 3-frame interferometric system and 4-frame x-ray camera were used. The information on distribution of electron temperature in the outflowing Al plasma was provided by x-ray spectroscopy. The experimental results reported in the paper are discussed by virtue of a simple theoretical analysis.

Z-pinches have been explored as efficient soft x-ray sources for many years. To optimize x-ray emission, various z-pinch configurations were tested. This paper presents data obtained with a hybrid gas-puff z-pinch imploding onto on-axis wires on a microsecond, multi-megaampere GIT-12 generator. In our previous experiments, the hybrid gas puff, i.e., an inner deuterium gas puff surrounded by an outer hollow cylindrical plasma shell, was used to produce energetic protons, deuterons, and neutrons up to 60 MeV [Klir et al., New J. Phys. 22, 103036 (2020)]. The behavior of the hybrid gas-puff z-pinch on GIT-12 was interpreted as a high-density plasma opening switch with a microsecond conduction time, 3 MA conduction current, nanosecond opening, and up to 60 MV stand-off voltage. These properties can be employed to transfer the current into an on-axis load with a high rise rate. In the recent experiments on GIT-12, we therefore placed single or multiple aluminum wires on the axis of the hybrid gas-puff z-pinch. Before a current sheath arrived at the axis, a coronal plasma was seen around the wire. A rapid increase in x-ray radiation was observed when the coronal plasma imploded onto the axis. The coronal plasma implosion resulted in a long (2 cm), narrow (∼mm) column radiating in the Al K-shell lines. With the single Al wire of 80 μm diameter, the K-shell x-ray output reached 5.5 ± 0.8 kJ in a 0.6 ± 0.1 TW peak power and 7 ± 1 ns pulse. The higher K-shell yield of 12 ± 2 kJ and peak K-shell power of 0.7 ± 0.1 TW were achieved with four 38 μm diameter Al wires. (Their cross section formed the corners of a square with 1 mm side.) The presence of the wires on the axis significantly suppressed ion acceleration and neutron production. Deuterium-deuterium (DD) neutron yields of about 1.2 × 1011 were 20 times smaller than the yields produced in shots without any wire. The DD neutron yield was increased up to 4.5 × 1011 when the Al wire was replaced by a fiber from deuterated polyethylene. A characteristic feature of the experiments with the (CD2)n fiber was a rapid expansion with the velocity approaching 900 km/s. [ABSTRACT FROM AUTHOR]

B-field measurements are crucial for the study of high-temperature and high-energy-density plasmas. A successful diagnostic method, ion deflectometry (radiography), is commonly employed to measure MGauss magnetic fields in laser-produced plasmas. It is based on the detection of multi-MeV ions, which are deflected in B-fields and measure their path integral. Until now, protons accelerated via laser–target interactions from a point-like source have been utilized for the study of Z-pinch plasmas. In this paper, we present the results of the first Z-pinch-driven ion deflectometry experiments using MeV deuterium beams accelerated within a hybrid gas-puff Z-pinch plasma on the GIT-12 pulse power generator. In our experimental setup, an inserted fiducial deflectometry grid (D-grid) separates the imploding plasma into two regions of the deuteron source and the studied azimuthal B-fields. The D-grid is backlighted by accelerated ions, and its shadow imprinted into the deuteron beams demonstrates ion deflections. In contrast to the employment of the conventional point-like ion source, in our configuration, the ions are emitted from the extensive and divergent source inside the Z-pinch. Instead of having the point ion source, deflected ions are selected via a point projection by a pinhole camera before their detection. Radial distribution of path-integrated B-fields near the axis (within a 15 mm radius) is obtained by analysis of experimental images (deflectograms). Moreover, we present a 2D topological map of local azimuthal B-fields B(r,z) via numerical retrieval of the experimental deflectogram. [ABSTRACT FROM AUTHOR]

Acceleration of ions to multi-MeV energies is investigated in various plasma devices to better understand processes in astrophysical plasmas and to develop efficient accelerators for a variety of applications. This paper reports the production of proton, deuteron, and electron beams in a z-pinch—a cylindrically symmetric plasma column that is compressed by its own magnetic field. For this work, the GIT-12 pulsed-power generator was used to drive a novel configuration of z-pinch that dramatically enhanced ion acceleration associated with disruption of the current by instabilities in the compressed plasma. During the disruption of 3 MA current, hydrogen ions were accelerated up to at least 50 MeV, which is almost a hundred-times the ion energy provided by the generator driving voltage of 0.6 MV. Under optimal conditions, the total numbers of hydrogen ions with energies above 20 and 50 MeV were 4 × 1013 and 1011, respectively. Accelerated deuterons produced one 20 ns (full width at half maximum) pulse of fast neutrons via D(d, n)3He and other nuclear reactions. A maximum neutron output of (1.0 ± 0.2) × 1012 neutrons/sr was observed downstream, i.e., in the anode to cathode direction. In this direction, the maximum neutron energy reached 58 ± 7 MeV. Both ion and neutron beams in our experiment reached an end-point energy of about 60 MeV, which is the highest value observed in pulsed-power devices. A localized peak voltage of ≳60 MV was driven by the inductive energy that was stored around the plasma column and that was extracted during a sub-nanosecond current drop. Considering the natural occurrence of current-carrying columns in laboratory and space plasmas, the current interruption observed in z-pinches could represent a more general physical process that contributes to the efficient conversion of magnetic energy into the energy of particle beams in various plasmas. [ABSTRACT FROM AUTHOR]

This paper describes the structure of a higher extreme ultraviolet (XUV) emission and plasma density region which surrounds a pinched dense-plasma column. It is interpreted as a toroidal-like plasma formation, which is flowing by a closed current with poloidal and toroidal components upon its surface. This current produces a local magnetic field, which separates the external discharge current from the surface of the dense pinch column. We estimated the values of closed currents as well as magnetic- and plasma-pressures in this column and its surrounding on the basis of the measured distribution of interferometric fringes and intense XUV emission, recorded during the pinch stagnation phase. The considered layer forms the region in which the magnetic energy can be conserved, and during its decay, the acceleration of fast deuterons can take place. [ABSTRACT FROM AUTHOR]

The paper discusses a possible energy transformation that leads to the acceleration of fast ions and electrons. In plasma-focus discharges that occur during deuterium filling, which have a maximum current of about 1 MA, the accelerated deuterons produce fast fusion neutrons and fast electrons hard X-ray emissions. Their total energy, which is of the order of several kilojoules, can be delivered by the discharge through a magnetic dynamo and self-organization to the ordered plasma structures that are formed in a pinch during the several hundreds of nanoseconds of the pinch implosion, stagnation, and evolution of instabilities. This energy is finally released during the decay of the ordered plasma structures in the volume between the anode face and the umbrella front of the plasma and current sheath in the form of induced electric fields that accelerate fast electrons and ions. [ABSTRACT FROM AUTHOR]

Deuterium gas-puff z-pinches are very efficient laboratory sources of neutron pulses. Using a novel hybrid gas-puff load on the GIT-12 generator, a significant increase in the neutron yields up to 5.6 × 10 12 is reached. At the same time, a very broad neutron energy spectrum up to energies on the order of tens of MeV is observed. In these experiments, the neutrons are produced not only by the D(d,n)3He (DD) nuclear reaction but also by reactions of multi-MeV deuterons with the experimental hardware. The angular distribution of the neutron fluence and dependence of the fluence on the distance from the z-pinch are measured using neutron activation diagnostics. By this method, a number of produced non-DD neutrons and anisotropy of DD neutron emission are evaluated. [ABSTRACT FROM AUTHOR]

This paper concerns the evolution of internal structures and the neutron production in plasma-focus discharges performed in the presence of a permanent magnet (placed inside the anode front) and within a residual magnetic field (after the removal of this magnet). The initial magnetic field generated by this magnet prevented: (i) the effective compression of a dense pinch column, (ii) the formation of plasma organized structures, and (iii) the evolution of plasma instabilities. The experimental results have shown an increase in the initial magnetic field due to a magnetic dynamo effect in the presence of the permanent magnet, as well as in a series of shots performed after its removal. It was observed that the appearance of plasmoidal structures is necessary for the emission of fusion neutrons. A characteristic quasicylindrical plasma layer of the radius corresponding to the plasma lobule tops, which might be identified with a ring region of the acceleration of fast deuterons, was also observed. [ABSTRACT FROM AUTHOR]

This paper presents the discussion concerning the characteristics of the fast deuterons which have energy above 30 keV and are recorded during high-current plasma-focus (PF) discharges, by means of PM-355 plastic track-detectors placed inside ion pinhole cameras. The fast deuterons evoke D-D fusion reactions, mainly by a beam-target mechanism. The distribution of the magnetic field, which influences the trajectories of the recorded deuterons, is discussed. It is found that the fast deuterons are produced in various local sources and their motion is strongly influenced by a circular symmetry of the local magnetic field, which increases their radial shift with a decrease in their energy. The sources of these deuterons are probably located inside the plasmoids and in some local regions of the ring-shaped plasma structures. These ring-structures can be formed outside the dense pinch column, up to a radius of 5 cm. Global magnetic fields, associated with the total current flow in the PF discharge, have a weaker influence. The observed radial shift of the recorded fast deuterons is interpreted as a result of their deflection by magnetic fields which have opposite orientations of the azimuthal components, associated with the currents flowing in directions towards and from the applied ion detectors. The local sources of the recorded fast deuterons correspond to filamentary structures, in which the stored magnetic energy (having the local high density) can be released in induced electric fields accelerating the deuterons during the magnetic reconnections. [ABSTRACT FROM AUTHOR]

Proton deflectometry is a promising way for mapping electric and magnetic fields in high-density and high-temperature plasmas, where an application of the classical methods (B-dot probes, Faraday rotation, and Zeeman splitting) is limited. It is based on the detection of a multi-MeV proton beam deflected in examined B-fields. In the past years, it has been successfully utilized in laser-generated plasmas for E-field and B-field measurements. Using our numerical code, we investigate the capabilities of proton deflectometry as a diagnostic method of MA Z-pinches. We simulate proton trajectories propagating through typical Z-pinch B-fields in two fundamental experimental setups (radial and axial) in order to study synthetic images (deflectograms). We demonstrate where proton deflectometry might be beneficial for the Z-pinch research. We explain a formation of the key features of deflectograms, which give us information about a profile and strength of the Z-pinch B-fields. We introduce a $B_{L}$ parameter, denoting an effective B-field averaged along the deflected proton orbit and show its importance for the proton deflectometry. [ABSTRACT FROM AUTHOR]

The paper describes the behaviour of plasma within a MA plasma-focus with a novel electrode configuration, in which the anode and anti-anode were both equipped with conical tips. This configuration was applied to test the possibility of reducing the pinch axial dimensions during the radial compression of a current sheath. It made it possible to strengthen a dense plasma jet near the anode end, which ejected plasma into a bigger plasmoidal structure formed in the central pinch region. It did not allow forming an opposite anti-anode jet and stopped the axial motion of this structure. In plasma focus discharges with the deuterium filling, the decay of the anode jet and the corresponding plasmoid evolution were accompanied by the fusion-neutron production. Some results obtained with this configuration have also supported the hypothesis of the acceleration of fast electrons and ions at a release of the magnetic energy during magnetic reconnections in the organized dense plasma structures. [ABSTRACT FROM AUTHOR]

A set of neutron diagnostics including scintillation time-of-flight detectors, bubble detectors, and several kinds of threshold nuclear activation samples is used to obtain information about the yield and spectrum of the neutrons produced by a deuterium gas-puff z-pinch. The experiments are performed at a current of about 3 MA on the GIT-12 generator at the Institute of High Current Electronics of the Siberian Branch of Russian Academy of Sciences in Tomsk. The average neutron yield in the experiments in 2016 was 2.3 × 1012 neutrons per single shot. Using the data obtained with the help of neutron activation diagnostics, the time-of-flight detectors have been absolutely calibrated and the broad energy spectrum of the produced neutrons was evaluated. By the calculations presented in this paper, due to the multi-MeV energies of deuterons generated in the pinch, up to 15% of the total neutron yield could be produced by nuclear reactions of deuterons with a stainless steel vacuum chamber and aluminum [ABSTRACT FROM PUBLISHER]

The paper concerns important differences in the evolution of plasma column structures during the production of fusion neutrons in the first and subsequent neutron pulses, as observed for plasmafocus discharges performed with the deuterium filling. The first neutron pulse, of a more isotropic distribution, is usually produced during the formation of the first big plasmoid. The next neutron pulses can be generated by the fast deuterons moving dominantly in the downstream direction, at the instants of a disruption of the pinch constriction, when other plasmoids are formed during the constriction evolution. In both cases, the fusion neutrons are produced by a beam-target mechanism and the acceleration of fast electron and deuteron-beams can be interpreted by transformation and decay of the magnetic field associated with a filamentary structure of the current flow in the plasmoid. [ABSTRACT FROM AUTHOR]

The paper describes the filamentary structure observed in the high-energy ultraviolet radiation for discharges performed at the hydrogen- or deuterium-filling and at the puffing of hydrogen, deuterium or helium, in a mega-ampere dense plasma-focus facility. The lifetime of this structure overcomes 50 ns. These filaments connect the surface of a pinched column with internal plasmoids formed at different combinations of filling and puffing gases and they should transport some current and plasma. During all the investigated deuterium shots, the fusion-produced neutrons were recorded. Therefore, deuterons should be present in the region of their acceleration, independent of the applied puffing of the gas. Simultaneously with the observed filaments, inside the dense plasma column small plasma-balls of mm-dimensions were observed, which had a similar lifetime (longer than the relaxation time) and quasi-stationary positions in the discharge volume. The observed filaments and balls might be a manifestation of the (i) discrete spatial structure of the current flowing through and around the dense plasma column and (ii) transport of the plasma from external layers to the central region. Their formation and visualization were easier due to the application of air admixtures in the puffed gas. [ABSTRACT FROM AUTHOR]

The paper describes the evolution of the ordered dense toroidal- and plasmoidal-like structures in a pinch column and the hard X-ray emission from mega-ampere dense plasma-focus discharges performed at the helium (He) filling. Some shots were carried out with an Al-wire of 270 μm in diameter, which was placed along the z-axis in the front of the anode face. The evolution of the considered structures was investigated by means of a multi-frame laser interferometer system as well as the X-ray diagnostics, and it was compared with their evolution observed earlier at the deuterium (D2) filling. In He-plasma, the ions had a higher mass and Z-number, and at the same initial filling pressure, the velocity of plasma transformations was decreased, but the stability of the investigated structures, as well as the self-generated azimuthal current component and the soft X-ray radiation were increased. The distribution of the plasma electron density (determined from the interferometric images) made it possible to estimate closed currents during the quasi-stationary phases. It was found that the internal toroidal- and plasmoidal-currents reached the level of hundreds of kA. The plasma corona around the Al-wire (penetrating through the internal structures) impeded the formation of a small diameter of the pinch constriction, but it did not prevent the production of fast electron beams with energies above 100 keV, similar to those observed at the D2-filling. [ABSTRACT FROM AUTHOR]

The application of a mixture of nitrogen and deuterium for the gas-puffing along the anode axis in deuterium plasma-focus discharges, as carried out at megaampere-level currents, enabled observations of the filamentary structure, and the decrease in the transformation velocity of the plasma column to be performed. It made possible to investigate the instability evolution during the production of hard X-rays and fast neutrons in more detail. The constriction of a plasma column transforms itself during the final phase of the compression into one or more small dense plasmoid-like structures which are separated by narrow necks. During the next phase, these structures start to decay by an expansion, in which a part of the plasma volume maintains its compactness. This evolution is explained by an increase and later decrease in the internal poloidal current component by reconnections of the associated magnetic lines, which are responsible for the acceleration of electron and ion beams. [ABSTRACT FROM AUTHOR]

In this paper, we describe the influence of an Al wire of 270 lm in diameter placed along the anode axis on the transformation of the deuterium pinch column in a megaampere (MA) plasma focus device. The evolution of the pinched column and of the wire corona was investigated by means of the multiframe interferometry, neutron and X-ray diagnostics. The wire corona did not influence considerably on the evolution of dense plasma structures and neutron production, but it increased the plasma density and consequently, the currents around its surface. The distribution of the closed internal currents (ranging hundreds of kA) and associated magnetic fields amounting to 5 T were also estimated in the dense plasma column and in plasmoidal structures at the near-equilibrium state. The description is based on the balance of the plasma pressure and the pressure of the internal poloidal and toroidal current components compressed by the external pinched column. The dominant number of fusion deuterium- deuterium (D-D) neutrons is produced during the evolution of instabilities, when the uninterrupted wire corona (containing deuterium) connects the dense structures of the pinch, and it did not allow the formation of a constriction of the sub-millimeter diameter. [ABSTRACT FROM AUTHOR]

A novel configuration of a deuterium z-pinch has been used to generate a nanosecond pulse of fast ions and neutrons. At a 3 MA current, the peak neutron yield of (3.6±0.5)×1012 was emitted within 20 ns implying the production rate of 1020 neutrons/s. High neutron yields resulted from the magnetization of MeV deuterons inside plasmas. Whereas deuterons were trapped in the radial direction, a lot of fast ions escaped the z-pinch along the z-axis. A large number of >25MeV ions were emitted into a 250 mrad cone. The cut-off energy of broad energy spectra of hydrogen ions approached 40 MeV. The total number of >1MeV and >25MeV deuterons were 1016 and 1013, respectively. Utilizing these ions offers a real possibility of various applications, including the increase of neutron yields or the production of short-lived isotopes in samples placed in ion paths. On the basis of our experiments with various samples, we concluded that a single shot would have been sufficient to obtain GBq positron activity of 13N isotopes via the 12C(d,n)13N reaction. Furthermore, the first z-pinch generated neutron radiograph produced by ≈ 20 ns pulses is presented in this paper. [ABSTRACT FROM AUTHOR]

This paper presents the results of the research of the influence of compressed neon, injected by the gas-puff nozzle in front of the anode axis by the deuterium current and plasma sheath on the evolution of the pinch, and neutron production at the current of 2 MA. The intense soft X-ray emission shows the presence of neon in the central region of the pinch. During the implosion and stopping of the plasma sheath, the deuterium plasma penetrates into the internal neon layer. The total neutron yield of 1010-1011 has a similar level as in the pure deuterium shots. The neutron and hard X-ray pulses from fusion D-D reaction are as well emitted both in the phase of the stopping implosion and during the evolution of instabilities at the transformation of plasmoidal structures and constrictions composed in this configuration from both gases. The fast deuterons can be accelerated at the decay of magnetic field of the current filaments in these structures. [ABSTRACT FROM AUTHOR]

The use of multi-frame interferometry used on the PF-1000 device with the deuterium filling showed the existence of a return motion of the top of several lobules of the pinched column formed at the pinched plasma column. This phenomenon was observed in the presence of an over-optimal mass in front of the anode, which depressed the intensity of the implosion and the smooth surface of the pinched plasma column. The observed evolution was explored through the use of closed poloidal currents transmitted outside the pinched plasma. This interpretation complements the scenario of the closed currents flowing within the structures inside the pinched column, which has been published recently on the basis of observations from interferometry, neutron, and magnetic probe diagnostics on this device. [ABSTRACT FROM AUTHOR]