Search

We overview of our whole room indirect calorimeter (WRIC), demonstrate validity and reliability of our WRIC, and explore a novel application of Bayesian hierarchical modeling to assess responses to small carbohydrate loads. To assess WRIC validity seven gas infusion studies were performed using a gas blender and profiles designed to mimic resting and postprandial metabolic events. Sixteen participants underwent fasting and postprandial measurements, during which they consumed a 75-kcal drink containing sucrose, dextrose, or fructose in a crossover design. Linear mixed effects models were used to compare resting and postprandial metabolic rate (MR) and carbohydrate oxidation. Postprandial carbohydrate oxidation trajectories for each participant and condition were modeled using Bayesian Hierarchical Modeling. Mean total error in infusions were 1.27 ± 0.67% and 0.42 ± 0.70% for VO2 and VCO2 respectively, indicating a high level of validity. Mean resting MR was similar across conditions ([Formula: see text] = 1.05 ± 0.03 kcal/min, p = 0.82, ICC: 0.91). While MR increased similarly among all conditions (~13%, p = 0.29), postprandial carbohydrate oxidation parameters were significantly lower for dextrose compared with sucrose or fructose. We provide evidence validating our WRIC and a novel application of statistical methods useful for research using WRIC.

In response to world-wide soil and groundwater contamination per- and polyfluoroalkyl substances (PFAS), stakeholders require immediate mitigation. Soil deposition in landfill is a common mitigation scheme, but PFAS losses occur via landfill leachate. These leaching losses can be reduced by strategically utilizing other deposited waste materials for ex-situ contaminant stabilization. This screening study tested activated carbon (AC) and eight types of wastes (compost, rubber granulate, bentonite clay, industrial sludge, incineration slag, incineration bottom ash (n=4), incineration fly ash-based air pollution control residue (FA-APC) (n=16)) in amending (adding 4%, 5%, 10% or 25% sorbent) field-contaminated (n=19) and PFAS-fortified (n=11) soils. A subset of FA-based residue types, all originating from grate-fire incineration (G-F-I) plants, achieved extraordinarily high removal of PFAS. The removal was up to 98% (25% addition) of the sum of six dominant PFAS for field-contaminated soil and >99% of the sum of 11 PFAS for fortified soil (10/25% addition) (>99.9% for PFOS). Calculated partitioning coefficient revealed significant trends between sorption strength and perfluorocarbon chain length (0.21-0.47 log units per CF2-moiety), indicating high importance of hydrophobic sorption (R2>0.98). However, with incremental G-F-I FA-APC addition this relationship disappeared, indicating an alternative sorption mechanism. The exceptional PFAS sorption by G-F-I FA-APC was not explained by G-F-I surface area, surface charge, soil mineral- and metal composition, or solution DOC, metal, or ion composition (H+, Ca2+, Mg2+, Al3+ and Ba2+). Although the mechanism remains unknown, this study showed that landfill sites can utilize G-F-I FA-APC for ex-situ stabilization at negative cost, thus preventing PFAS-containing leachate.

This study explores gratitude as a multidimensional and work-specific construct. Utilizing a sample of 625 employees from a variety of positions in a medium-sized school district in the United States, we developed and evaluated a new measure, namely the Work Gratitude Scale (WGS), which encompasses recognized conative (intentional), cognitive, affective, and social aspects of gratitude. A systematic, six-phased approach through structural equation modeling (SEM) was used to explore and confirm the factorial structure, internal consistency, measurement invariance, concurrent, convergent, and discriminant validity of the WGS. The results supported a 10-item measure with three dimensions: “grateful appraisals” (three items), “gratitude toward others” (four items), and “intentional attitude of gratitude” (three items). Thereafter, first-order, second-order, and bifactor confirmatory models were estimated and compared. Work gratitude was found to be best described by a second-order construct with three underlying first-order dimensions. Measurement invariance was supported in relation to gender. Concurrent validity was supported in relation to two existing dispositional gratitude scales, namely the Gratitude Questionnaire and the Gratitude, Resentment, and Appreciation Scale (GRAT). Convergent validity was supported in relation to the Core Self-Evaluations Scale (CSES) and the Psychological Capital Questionnaire. Discriminant validity was supported in relation to various demographic factors such as age, gender, occupation, and tenure. The findings support the WGS as a multidimensional measure that can be used in practice to measure overall work-related gratitude and to track the effectiveness of gratitude-related workplace interventions.

Methane (CH4) is the second most important greenhouse gas after carbon dioxide (CO2) and is inter alia produced in natural freshwater ecosystems. Given the rise in CH4 emissions from natural sources, researchers are investigating environmental factors and climate change feedbacks to explain this increment. Despite being omnipresent in freshwaters, knowledge on the influence of chemical stressors of anthropogenic origin (e.g., antibiotics) on methanogenesis is lacking. To address this knowledge gap, we incubated freshwater sediment under anaerobic conditions with a mixture of five antibiotics at four levels (from 0 to 5000 µg/L) for 42 days. Weekly measurements of CH4 and CO2 in the headspace, as well as their compound-specific δ13C, showed that the CH4 production rate was increased by up to 94% at 5000 µg/L and up to 29% at field-relevant concentrations (i.e., 50 µg/L). Metabarcoding of the archaeal and eubacterial 16S rRNA gene showed that effects of antibiotics on bacterial community level (i.e., species composition) may partially explain the observed differences in CH4 production rates. Despite the complications of transferring experimental CH4 production rates to realistic field conditions, the study indicated that chemical stressors contribute to the emissions of greenhouse gases by affecting the methanogenesis in freshwaters.

Soils contaminated with per- and polyfluoroalkyl substances (PFASs) are an important source for impacting drinking water delivery systems and surface water bodies world-wide, posing an urgent risk to human health and environmental quality. However, few treatment techniques have been tested for PFAS-contaminated soil hotspots. This study investigated the possibility of thermal desorption as a possible technique to remediate soils contaminated with multiple PFASs. Two fortified soils (∑9PFAS ≈ 4 mg kg-1) and one field-contaminated soil (∑9PFAS ≈ 0.025 mg kg-1) were subjected to a 75-min thermal treatment at temperatures ranging from 150 to 550°C. Soil concentrations of PFASs showed a significant decrease at 350°C, with the ∑9PFAS concentration decreasing by, on average, 43% and 79% in the fortified and field contaminated soils, respectively. At 450°C, >99% of PFASs were removed from the fortified soils, while at 550°C the fraction removed ranged between 71 and 99% for the field contaminated soil. In the field contaminated soil, PFAS classes with functional groups of sulfonates (PFSAs) and sulfonamides (FOSAs) showed higher removal than the perfluoroalkyl carboxylates (PFCAs). Thus thermal desorption has the potential to remove a wide variety of PFASs from soil, although more studies are needed to investigate the cost-effectiveness, creation of transformation products, and air-phase vacuum filtration techniques.

The four electron stripping stages leading to fully stripped gold ions in the Relativistic Heavy Ion Collider (RHIC) are briefly described. The third stripper, which removes 46 electrons from the Au^{31+} ions leading to heliumlike Au^{77+}, offers the greatest challenges in terms of energy loss and induced energy spread. These problems are described in detail as well as recent advances in the design and performance of this stripper. Measurements performed with several carbon and aluminum strippers show general agreement with a semiempirical model but small systematic deviations suggest that some model adjustments may be in order. The best performance is predicted and obtained with a combined carbon-aluminum foil system. Measurements showing the enhanced performance in the alternating gradient synchrotron are described. The stripper that removes the last two electrons has also been improved and the results of relevant calculations and measurements are presented.

Errors in delivering a uniformly distributed radiation dose to biological and material samples exposed to charged particle beams are a significant problem for experimenters. In this paper, we discuss data collected on the uniform beam distributions produced for NASA’s Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory (BNL), using a method that was conceived theoretically and tested experimentally at BNL. This method [N. Tsoupas et al., Nucl. Sci. Eng. 126, 71 (1997)NSENAO0029-5639] of generating uniform beam distributions on a plane normal to the beam’s direction relies only on magnetically focusing the transported beam; no collimation of the beam is required or any other type of interaction of the beam with materials other than the target material. The method compares favorably with alternative methods of producing such distributions, and it can be applied to the entire energy spectrum of charged particle beams that are delivered to the NSRL’s experiments by the Booster for the Alternating Gradient Synchrotron at BNL.

An 11.4% partial Siberian snake was used to successfully accelerate polarized protons through a strong intrinsic depolarizing spin resonance in the Alternating Gradient Synchrotron (AGS). No noticeable depolarization was observed. This opens up the possibility of using a 20% to 30% partial Siberian snake in the AGS or other medium energy proton synchrotrons to overcome all weak and strong depolarizing spin resonances.

A spin matching method to cure intrinsic coupled spin resonances in the AGS is proposed and explored using an extension of the existing DEPOL program algorithm. The extension of DEPOL to handle linear coupling in the polarized beam acceleration is documented. Data collected from recent polarized proton experiments in the AGS are compared with the predictions derived from the extended DEPOL program.

OBJECTIVE: To determine the effect of a low-calorie parenteral nutrition (PN) regimen on the incidence and severity of hyperglycemia and insulin requirements. DESIGN: Prospective, randomized, clinical trial. SETTING: Urban, university-affiliated, level-I trauma center. PATIENTS: Consecutive surgical patients requiring PN. NTERVENTIONS: Patients were randomized to receive either a low-calorie PN formulation (20 nonprotein kilocalories per kg per day) or a standard PN formulation (30 nonprotein kilocalories per kg per day). Lipid-derived calories were standardized to 1000 kilocalories three times weekly for all patients; consequently, the number of calories varied only by the amount of carbohydrate administered. Protein requirements were individualized on the basis of estimated metabolic stress. Hyperglycemia was defined as a blood glucose level ≥200 mg/dL. MEASUREMENTS AND MAIN RESULTS: Forty patients were evaluated (low-calorie PN, n = 20; standard PN, n = 20). Demographics of the two groups were similar. The incidence of hyperglycemic events was significantly lower in the low-calorie group (0% [0–0.5] vs. 33.1% [0–58.4]; p = .001]. Additionally, the severity of hyperglycemia was also lower in the low-calorie group (mean glucose area under the curve = 118 ± 22 [mg·hr]/dL vs. 172 ± 44 [mg·hr]/dL; p < .001). This resulted in lower average daily insulin requirements (0 [0–0] units vs. 10.9 [0–25.6] units; p < .001.). The only predictor of hyperglycemia was a dextrose administration rate >4 mg/kg/min. CONCLUSIONS: Administration of a low-calorie PN formulation resulted in fewer and less-severe hyperglycemic events and lower insulin requirements. PN regimens should not exceed a dextrose administration rate of 4 mg/kg/min to avoid hyperglycemic events. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) are found frequently in both groundwater and surface water sources across Sweden posing challenges to drinking water supply. Lake Ekoln is located south of Uppsala and is the basin of Lake Mälaren; Lake Mälaren is the third largest lake in Sweden and is the drinking water source for more than two million people. The aim of this study was to simulate the fate and transport of PFAS in Lake Ekoln during the period 2017 - 2020 using three-dimensional hydrodynamic modelling. The simulated water temperatures were in agreement with the observed water temperatures. The simulated PFAS concentrations were generally in agreement with the available measurements, but the lack of measurements made the comparison uncertain. The modelling results described the seasonal variations of PFAS in Lake Ekoln informing the operation of the drinking water treatment plants located downstream. The modelling results confirmed that the main inflow to the lake - the river Fyrisån - is the main source of PFAS to Lake Ekoln, highlighting the importance of mitigating this source in the context of ensuring safe drinking water supply in the Stockholm region. Regular monitoring of PFAS in the river Fyrisån is needed, and additional measurements in Lake Ekoln would facilitate further model development., Competing Interests: Declaration of Competing Interest ☒ The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Release of persistent and potentially toxic per- and polyfluoroalkyl substances (PFAS) and other halogenated compounds into the aqueous environment is an emerging issue and advanced treatment methods are needed for their removal from contaminated water. Destructive treatment methods for PFAS exist, but there is a risk of incomplete degradation, resulting in creation of transformation products during treatment. This study assessed the potential of electrochemical oxidation (EO) for destruction of PFAS and other halogenated compounds, and their transformation products. Suspect and non-target screening were used to explore the chemical space of these samples and identify compounds present before and after the treatment, including transformation products. In total, 21 PFAS classes and 53 individual PFAS were identified using suspect and non-target screening, with confidence level (CL) 3d or higher. Two new classes of PFAS (FASHN and MeOH-FASA) were discovered for the first time. Suspect screening of PFAS revealed that hydro-substituted and ether PFAS could be formed during EO. A total of 12 chlorinated and two brominated compounds were also detected and confirmed with CL 1-3, with six compounds determined to be transformation products. Formation of ammonium oxidation byproducts was hypothesized as being responsible for most identified transformation products formed during EO., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

For modulation of cellular behavior, systems that can provide controlled delivery of proteins (soluble signals) over a few hours to a few days are highly desirable. Conventional erosion-controlled systems are inadequate as their degradation spans days to months. Conversely, hydrogels offer quicker release but are limited by a high burst release that can lead to cytotoxicity and rapid depletion of the permeant. To avoid burst release and achieve controlled diffusion of proteins, we propose exploiting electrostatic interactions between the hydrogel matrix and proteins. Here we demonstrate this concept using two disparate hydrogel systems: (1) a chemically cross-linked protein (gelatin) matrix and (2) a physically cross-linked polysaccharide (agarose) matrix and three proteins having different isoelectric points. By introducing fixed charges into the hydrogel matrix using carboxylated agarose (CA), the precise and controlled release of BSA, lactoferrin, and FGF2 over a few hours to days is demonstrated. Using electroendosmosis, we further provide evidence for a clear role for CA in modulating the release. Our findings suggest that the paradigm presented herein has the potential to significantly enhance the design of hydrogel systems for the delivery of proteins and RNA therapeutics for vaccines and biomedical applications ranging from tissue engineering to functional coatings for medical devices.

The environmental burden of organic micropollutants has been shown in aquatic ecosystems, while trophic fate of many compounds in terrestrial food chains remains highly elusive. We therefore studied concentrations of 108 organic micropollutants in a common European mammal, the bank vole (Clethrionomys glareolus), and 82 of the compounds in a specialized predator, Tengmalm's owl (Aegolius funereus) relying to >90 % on voles as its prey. We studied compounds in whole voles (n = 19), pools of 4-8 bank voles (n pools  = 4), owl blood (n = 10) and in owl eggs (n = 10) in two regions in Sweden. For comparison, we also included previously published data on 23 PFAS (per- and polyfluoroalkyl substances) in bank vole liver (n pools  = 4) from the same regions. In voles, concentrations of the organic micropollutants caffeine (max Individual 220 ng/g ww) and DEET (N,N-diethyl-m-toluamide) (max Pool 150 ng/g ww) were 2-200 times higher in voles relative to owl blood and eggs. Conversely, concentrations of nicotine, oxazepam, salicylic acid, and tributyl citrate acetate were 1.3-440 times higher in owls. Several PFAS showed biomagnification in owls as revealed by maximum biomagnification factors (BMFs); PFNA (perfluorononanoate) BMF = 5.6, PFTeDA (perfluorotetradecanoic acid) BMF = 5.9, and PFOS (perfluorooctane sulfonate) BMF = 6.1. Concentrations of organic micropollutants, alongside calculated BMFs, and Tengmalm's owl's heavy reliance on bank vole as staple food, suggest, despite small sample size and potential spatio-temporal mismatch, accumulation of PFAS (especially PFNA, PFTeDA, and PFOS) in owls and biomagnification along the food chain. Concentrations of PFAS in owl eggs (e.g., 21 ng/g ww PFOS) highlight the likely pivotal role of maternal transfer in contaminant exposure for avian embryos. These concentrations are also of concern considering that certain predators frequently consume owl eggs, potentially leading to additional biomagnification of PFAS with yet undetermined consequences for ecosystem health., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Innovative tools suitable for chemical risk assessment are being developed in numerous domains, such as non-target chemical analysis, omics, and computational approaches. These methods will also be critical components in an efficient early warning system (EWS) for the identification of potentially hazardous chemicals. Much knowledge is missing for current use chemicals and thus computational methodologies complemented with fast screening techniques will be critical. This paper reviews current computational tools, emphasizing those that are accessible and suitable for the screening of new and emerging risk chemicals (NERCs). The initial step in a computational EWS is an automatic and systematic search for NERCs in literature and database sources including grey literature, patents, experimental data, and various inventories. This step aims at reaching curated molecular structure data along with existing exposure and hazard data. Next, a parallel assessment of exposure and effects will be performed, which will input information into the weighting of an overall hazard score and, finally, the identification of a potential NERC. Several challenges are identified and discussed, such as the integration and scoring of several types of hazard data, ranging from chemical fate and distribution to subtle impacts in specific species and tissues. To conclude, there are many computational systems, and these can be used as a basis for an integrated computational EWS workflow that identifies NERCs automatically.

Groundwater is an often-overlooked resource, while its declining quantity and quality is of global concern. To protect and ensure stable quantity and quality of groundwater systems used as drinking water supplies, a common method is to artificially recharge these groundwater supplies with surface water, a process called managed aquifer recharge (MAR), that has been used globally for decades. However, surface waters used for MAR often contain elevated concentrations of anthropogenic chemicals of emerging concern (CECs), such as plastics, pesticides, pharmaceuticals and personal care products (PPCPs), or per- and polyfluoroalkyl substances (PFAS). When infiltrating this surface water, MAR can thus act as a shortcut for CECs into groundwater systems and eventually drinking water supplies. Especially PFAS are an example of very persistent contaminants showing atypical transport patterns during MAR and thus posing a risk for ground- and drinking water contamination. This systematic review addresses the transport process of CECs through MAR systems by looking at (1) common CEC concentrations in surface waters, (2) factors affecting CEC transport and possible retention during MAR, such as sorption and other physio-chemical mechanisms of CECs, biological and chemical decomposition, or hydrogeological properties of the MAR system, and (3) key contaminants leaching through the MAR systems as well as possible treatment options to improve the retention of CECs during MAR. Since we are facing increasing needs for high quality drinking water, lower CEC drinking water guidelines as well as an increasing number of identified CECs in surface waters, we conclude with a series of recommendations and future research directions to address these issues. Those include the need for regular monitoring programs specifically addressing CECs and especially not yet regulated, (very) persistent and (very) mobile contaminants, such as PFAS, as well as redesigned MAR systems to ensure stable ground- and drinking water quantity and quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Material-binding peptides (MBPs) have emerged as a diverse and innovation-enabling class of peptides in applications such as plant-/human health, immobilization of catalysts, bioactive coatings, accelerated polymer degradation and analytics for micro-/nanoplastics quantification. Progress has been fuelled by recent advancements in protein engineering methodologies and advances in computational and analytical methodologies, which allow the design of, for instance, material-specific MBPs with fine-tuned binding strength for numerous demands in material science applications. A genetic or chemical conjugation of second (biological, chemical or physical property-changing) functionality to MBPs empowers the design of advanced (hybrid) materials, bioactive coatings and analytical tools. In this review, we provide a comprehensive overview comprising naturally occurring MBPs and their function in nature, binding properties of short man-made MBPs (<20 amino acids) mainly obtained from phage-display libraries, and medium-sized binding peptides (20-100 amino acids) that have been reported to bind to metals, polymers or other industrially produced materials. The goal of this review is to provide an in-depth understanding of molecular interactions between materials and material-specific binding peptides, and thereby empower the use of MBPs in material science applications. Protein engineering methodologies and selected examples to tailor MBPs toward applications in agriculture with a focus on plant health, biocatalysis, medicine and environmental monitoring serve as examples of the transformative power of MBPs for various industrial applications. An emphasis will be given to MBPs' role in detecting and quantifying microplastics in high throughput, distinguishing microplastics from other environmental particles, and thereby assisting to close an analytical gap in food safety and monitoring of environmental plastic pollution. In essence, this review aims to provide an overview among researchers from diverse disciplines in respect to material-(specific) binding of MBPs, protein engineering methodologies to tailor their properties to application demands, re-engineering for material science applications using MBPs, and thereby inspire researchers to employ MBPs in their research.

Background: There is inconclusive evidence for an association between per- and polyfluoroalkyl substances (PFAS) and fetal growth., Objectives: We conducted a nation-wide register-based cohort study to assess the associations of the estimated maternal exposure to the sum (PFAS4) of perfluorooctane sulfonic acid (PFOS), perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA) and perfluorohexane sulfonic acid (PFHxS) with birthweight as well as risk of small- (SGA) and large-for-gestational-age (LGA)., Materials and Methods: We included all births in Sweden during 2012-2018 of mothers residing ≥ four years prior to partus in localities served by municipal drinking water where PFAS were measured in raw and drinking water. Using a one-compartment toxicokinetic model we estimated cumulative maternal blood levels of PFAS4 during pregnancy by linking residential history, municipal PFAS water concentration and year-specific background serum PFAS concentrations in Sweden. Individual birth outcomes and covariates were obtained via register linkage. Mean values and 95 % confidence intervals (CI) of β coefficients and odds ratios (OR) were estimated by linear and logistic regressions, respectively. Quantile g-computation regression was conducted to assess the impact of PFAS4 mixture., Results: Among the 248,804 singleton newborns included, no overall association was observed for PFAS4 and birthweight or SGA. However, an association was seen for LGA, multivariable-adjusted OR 1.08 (95% CI: 1.01-1.16) when comparing the highest PFAS4 quartile to the lowest. These associations remained for mixture effect approach where all PFAS, except for PFOA, contributed with a positive weight., Discussions: We observed an association of the sum of PFAS4 - especially PFOS - with increased risk of LGA, but not with SGA or birthweight. The limitations linked to the exposure assessment still require caution in the interpretation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

A typical component of polymer waste is polystyrene (PS) used in numerous applications, but degraded only slowly in the environment due to its hydrophobic properties. To increase the reactivity of polystyrene, polar groups need to be introduced. Here, biohybrid catalysts based on the engineered anchor peptide LCI&#95;F16C are presented, which are capable of attaching to polystyrene microparticles and hydroxylating benzylic C-H bonds in polystyrene microparticles using commercially available oxone as oxidant. LCI peptides achieve a dense surface coverage of PS through monolayer formation within minutes in aqueous solutions at ambient temperature. The catalytically active cobalt cofactor Co-L1 or Co-L2 with a modified NNNN macrocyclic TACD ligand (TACD=1,4,7,10-tetraazacyclododecane) is covalently bound to the anchor peptide LCI through a maleimide linker. Compared to the free cofactors, a 12- to 15-fold improvement in catalytic activity using biohybrid catalysts based on LCI&#95;F16C was observed., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Per- and polyfluoroalkyl substances (PFAS) are ubiquitously distributed in the aquatic environment. They include persistent, mobile, bioaccumulative, and toxic chemicals and it is therefore critical to increase our understanding on their adsorption, distribution, metabolism, excretion (ADME). The current study focused on uptake of seven emerging PFAS in zebrafish (Danio rerio) and their potential maternal transfer. In addition, we aimed at increasing our understanding on mixture effects on ADME by developing a physiologically based kinetic (PBK) model capable of handling co-exposure scenarios of any number of chemicals. All studied chemicals were taken up in the fish to varying degrees, whereas only perfluorononanoate (PFNA) and perfluorooctanoate (PFOA) were quantified in all analysed tissues. Perfluorooctane sulfonamide (FOSA) was measured at concerningly high concentrations in the brain (C max over 15 μg/g) but also in the liver and ovaries. All studied PFAS were maternally transferred to the eggs, with FOSA and 6:2 perfluorooctane sulfonate (6,2 FTSA) showing significant (p < 0.02) signs of elimination from the embryos during the first 6 days of development, while perfluorobutane sulfonate (PFBS), PFNA, and perfluorohexane sulfonate (PFHxS) were not eliminated in embryos during this time-frame. The mixture PBK model resulted in >85 % of predictions within a 10-fold error and 60 % of predictions within a 3-fold error. At studied levels of PFAS exposure, competitive binding was not a critical factor for PFAS kinetics. Gill surface pH influenced uptake for some carboxylates but not the sulfonates. The developed PBK model provides an important tool in understanding kinetics under complex mixture scenarios and this use of New Approach Methodologies (NAMs) is critical in future risk assessment of chemicals and early warning systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

The photooxidative stability of a series of doubly bridged anthracenes was evaluated after their preparation via twofold macrocyclization of a bis(resorcinyl)anthracene. Lightfastness correlates with the energy levels of the highest occupied molecular orbital (HOMO), resulting in superior stability of the tetraesters compared to the tetraethers. The lengths and steric demand of the linker only plays a minor role for the ester-based compounds, which can be prepared in reasonable yields and thus tested in proof-of-concept organic light-emitting diodes. Double ester-bridging allows deep blue electro-luminescence, highlighting the importance of the choice of the functional groups used for macrocyclization., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The environmental distribution of per- and polyfluoroalkyl substances (PFAS) in water, snow, sediment and soil samples taken along the west coast of Spitsbergen in the Svalbard archipelago, Norwegian Arctic, was determined. The contribution of potential local primary sources (wastewater, firefighting training site at Svalbard airport, landfill) to PFAS concentrations and long-range transport (atmosphere, ocean currents) were then compared, based on measured PFAS levels and composition profiles. In remote coastal and inland areas of Spitsbergen, meltwater had the highest mean ΣPFAS concentration (6.5 ± 1.3 ng L -1 ), followed by surface snow (2.5 ± 1.7 ng L -1 ), freshwater (2.3 ± 1.1 ng L -1 ), seawater (1.05 ± 0.64 ng L -1 ), lake sediments (0.084 ± 0.038 ng g -1 dry weight (dw)) and marine sediments (-1 dw, median 0.015 ng g -1 dw). Perfluoroalkyl sulfonates (PFSA) and 6:2 fluorotelomer sulfonate (FTSA) were predominant in water and soil samples influenced by local sources, while perfluoroalkyl carboxylates (PFCA) were predominant in water and sediment from remote coastal and inland areas of Svalbard. The PFAS composition profiles observed in remote areas indicated that atmospheric transport and oxidation of volatile precursors is an important source of PFCA on Svalbard. Shorter-chain PFAS such as perfluorobutanoate (PFBA) were the predominant PFAS in freshwater, reflecting replacement of C 8 -chained PFAS with shorter-chained compounds. The comparatively high PFAS (especially PFBA) concentration in meltwater indicated that melting of snow and ice during the Arctic spring is an important diffuse local PFAS source. This source may become even more important with climate warming-induced melting of Arctic glaciers and ice sheets. Further studies of mobilisation and transport of PFAS in the Arctic region are needed to confirm this trend., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

A collaborative trial involving 16 participants from nine European countries was conducted within the NORMAN network in efforts to harmonise suspect and non-target screening of environmental contaminants in whole fish samples of bream (Abramis brama). Participants were provided with freeze-dried, homogenised fish samples from a contaminated and a reference site, extracts (spiked and non-spiked) and reference sample preparation protocols for liquid chromatography (LC) and gas chromatography (GC) coupled to high resolution mass spectrometry (HRMS). Participants extracted fish samples using their in-house sample preparation method and/or the protocol provided. Participants correctly identified 9-69 % of spiked compounds using LC-HRMS and 20-60 % of spiked compounds using GC-HRMS. From the contaminated site, suspect screening with participants' own suspect lists led to putative identification of on average ∼145 and ∼20 unique features per participant using LC-HRMS and GC-HRMS, respectively, while non-target screening identified on average ∼42 and ∼56 unique features per participant using LC-HRMS and GC-HRMS, respectively. Within the same sub-group of sample preparation method, only a few features were identified by at least two participants in suspect screening (16 features using LC-HRMS, 0 features using GC-HRMS) and non-target screening (0 features using LC-HRMS, 2 features using GC-HRMS). The compounds identified had log octanol/water partition coefficient (K OW ) values from -9.9 to 16 and mass-to-charge ratios (m/z) of 68 to 761 (LC-HRMS and GC-HRMS). A significant linear trend was found between log K OW and m/z for the GC-HRMS data. Overall, these findings indicate that differences in screening results are mainly due to the data analysis workflows used by different participants. Further work is needed to harmonise the results obtained when applying suspect and non-target screening approaches to environmental biota samples., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

While highly contaminated drinking water (DW) is a major source of exposure to perfluoroalkyl acids (PFAAs), the contribution of low-level contaminated DW (i.e. < 10 ng/L of individual PFAAs) to PFAA body burdens has rarely been studied. To address this knowledge gap, we evaluated the association between concentrations of perflurooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorohexane sulfonic acid (PFHxS) and perfluorooctane sulfonic acid (PFOS), and their sum (∑ 4 PFAAs) in DW and serum in Swedish adolescents using weighted least squares regression. We paired serum PFAA concentrations in adolescents (age 10-21 years, n = 790) from the dietary survey Riksmaten Adolescents 2016-17 (RMA) with mean PFAA concentrations in water samples collected in 2018 from waterworks (n = 45) supplying DW to the participant residential and school addresses. The median concentrations of individual PFAAs in DW were < 1 ng/L. Median concentrations of PFNA and PFHxS in serum were < 1 ng/g, while those of PFOA and PFOS were 1-2 ng/g. Significant positive associations between PFAA concentrations in DW and serum were found for all four PFAAs and ∑ 4 PFAAs, with estimated serum/DW concentration ratios ranging from 210 (PFOA) to 670 (PFHxS), taking exposure from sources other than DW (background) into consideration. The mean concentrations of PFHxS and ∑ 4 PFAA in DW that would likely cause substantially elevated serum concentrations above background variation were estimated to 0.9 ng/L and 2.4 ng/L, respectively. The European Food Safety Authority has determined a health concern concentration of 6.9 ng ∑ 4 PFAAs/mL serum. This level was to a large degree exceeded by RMA participants with DW ∑ 4 PFAA concentrations above the maximum limits implemented in Denmark (2 ng ∑ 4 PFAAs/L) and Sweden (4 ng ∑ 4 PFAAs/L) than by RMA participants with DW concentrations below the maximum limits. In conclusion, PFAA exposure from low-level contaminated DW must be considered in risk assessment for adolescents., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Treatment of environmental media contaminated with per- and polyfluoroalkyl substances (PFAS) is crucial to mitigate mounting health risks associated with exposure. Colloidal activated carbon (CAC) has shown promise in treating contaminated soils, but understanding the interaction among PFAS during sorption is necessary for optimal remediation. This study investigated the extent to which PFAS of varying chain lengths and functional groups compete for sorption to CAC. Batch tests were conducted with natural soil and spiked water, using CAC at 0.2% w/w to remove seven PFAS with individual starting concentrations up to 0.05 mmol L -1 . PFAS sorption to CAC was evaluated in three systems: a composite mixture of all studied compounds, a binary-solute system, and a single-solute system. The sorption experiments exhibited strong PFAS affinity to CAC, with removal rates between 41% and 100%, and solid/liquid partition coefficients (K d ) between 10 and 10 4 L kg -1 . Differences were noticed among the various spiking mixtures, based on perfluorocarbon chain length, functional group, and the starting PFAS concentrations. Competition effects were detected when PFAS were in a multi-solute system, with an average 10% drop in removal, which can evidently become more relevant at higher concentrations, due to the observed non-linearity of the sorption process. The PFAS most vulnerable to competition effects in multi-solute systems were the short-chain perfluoropentanoic acid (PFPeA) and perfluorobutane sulfonic acid (PFBS), with an up to 25% reduction in removal. In bi-solute systems, perfluorooctane sulfonamide (FOSA) dominated over its ionisable counterparts, i.e. perfluorooctane sulfonic acid (PFOS) and perfluorononanoic acid (PFNA), indicating the importance of hydrophobic effects or layer formation in the sorption process. These results underscore the importance of considering competition in PFAS sorption processes when designing and implementing remediation techniques for PFAS-contaminated media., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Atmospheric deposition is the most dominant source of polycyclic aromatic hydrocarbons (PAHs) in remote and pristine areas. Despite low bioaccumulation potential, PAHs and their persistent transformation products (PAH-derivatives) are chemicals of concern as they can harm human and animal health through chronic low dose exposure. In this study, atmospheric deposition fluxes of polycyclic aromatic compounds (PACs) were measured on a seasonal basis (3-month periods) from 2012 to 2016 in a remote subarctic forest catchment in northern Europe. The target PACs included 19 PAHs and 15 PAH-derivatives (oxygenated, nitrogenated, and methylated PAHs). The deposition fluxes of ƩPAHs and ƩPAH-derivatives were in the same range and averaged 530 and 500 ng m 2 day -1 , respectively. The fluxes were found to be higher with a factor of 2.5 for ƩPAHs and a factor of 3 for ƩPAH-derivatives during cold (<0 °C) in comparison to warm (>10 °C) periods. PAHs and PAH-derivatives showed similar seasonal patterns, which suggests that these two compound classes have similar sources and deposition mechanisms, and that the source strength of the PAH-derivatives in air follows that of the PAHs. The terrestrial export of PACs via the outlet of the catchment stream was estimated to be 1.1% for ƩPAHs and 1.7% for ƩPAH-derivatives in relation to the annual amounts deposited to the catchment, which suggests that boreal forests are sinks for PACs derived from the atmosphere. Some individual PACs showed higher export than others (i.e. chrysene, cyclopenta(c,d)pyrene, carbazole, quinoline, and benzo(f)quinoline), with high export PACs mostly characterized by low molecular weight and low hydrophobicity (2-3 benzene rings; log K ow <6.0)., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Per- and polyfluoroalkyl substances (PFAS) are anthropogenic compounds threatening water quality and food safety worldwide. Phytoremediation is a nature-based, cost-effective, and scalable solution with high potential for treating PFAS-contaminated sites. However, there is a large knowledge gap regarding choice of plant species and methods to enhance performance. This study assessed the PFAS phytoextraction potential of sunflower (Helianthus annuus), mustard (Brassica juncea), and industrial hemp (Cannabis sativa) in a greenhouse experiment, using inorganic fertilizer and a microbial mixture as supplements. PFAS concentrations were measured using UPLC-MS/MS, and bioconcentration factors for different plant tissues and removal efficiency were determined. Perfluoroalkyl carboxylic acid (PFCA) accumulation was 0.4-360 times higher than that of perfluoroalkyl sulfonic acid (PFSA) homologues of similar perfluorocarbon chain length. Inorganic fertilizer significantly (p < 0.001) reduced PFAS concentration in all plant tissues, whereas the microbial mixture tested did not affect PFAS concentration. PFAS uptake ranged from 0.2 to 33% per crop cycle. Overall, the potential number of crop cycles required for removal of 90% of individual PFAS ranged from six (PFPeA) to 232 (PFOA) using sunflower, 15 (PFPeA) to 466 (PFOS) using mustard and nine (PFPeA) to 420 (PFOS) using Hemp. In this study, the percentage of PFAS removal by plants was determined, and an estimation of the time required for PFAS phytoextraction was determined for the first time. This information is important for practical phytoremediation applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Per- and polyfluoroalkyl substances (PFAS) are widespread pollutants that can influence microorganisms. To unveil the effects of PFAS in natural microecosystems, a study that focused on the bacterial, fungal, and microeukaryotic communities around the PFAS point source was conducted in China. A total of 255 specific taxa were significantly different between the upstream and downstream samples, 54 of which were directly correlated with PFAS concentration. Stenotrophomonas (99.2 %), Ralstonia (90.7 %), Phoma (21.9 %), and Alternaria (97.6 %) were the dominant genera in sediment samples from the downstream communities. In addition, most of the dominant taxa were significantly correlated with PFAS concentration. Furthermore, the type of microorganism (bacteria, fungi, and microeukaryotes) and habitat (sediment or pelagic) also influence the microbial community responses to PFAS exposure. Pelagic microorganisms featured more PFAS-correlated biomarker taxa (36 pelagic microeukaryotic biomarkers and 8 pelagic bacteria biomarkers) than the sediments (9 sediment fungi biomarkers and 5 sediment bacteria biomarker). In general, around the factory, the microbial community was more variable in pelagic, summer, and microeukaryotic conditions than in other types. Attention needs to be paid to these variables in the future effect of PFAS on microorganisms., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Landfill facilities are a major source of release of per- and polyfluoroalkyl substances (PFAS) to the surrounding environment. In this study, landfill leachate treated in a conventional wastewater treatment plant and PFAS-contaminated groundwater were subjected to suspect screening analysis and semi-quantification using total oxidizable precursor (TOP) assay and liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS). TOP assays yielded expected results for legacy PFAS and their precursors, but showed no discernible evidence of degradation of perfluoroethylcyclohexane sulfonic acid. TOP assays also produced significant evidence of presence of precursors in both treated landfill leachate and groundwater, but the majority of precursors had probably degraded into legacy PFAS after many years in the landfill. Suspect screening identified a total of 28 PF AS, of which six were not included in the targeted method and were identified with confidence level (CL) ≥3. Semi-quantification of these six compounds showed very low concentrations, indicating that they are not as great a concern as the target PFAS., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

PER: and polyfluoroalkyl substances (PFAS) are ubiquitously distributed in wastewater, due to their numerous uses in industry and consumer products, but little is known of PFAS mass flows in municipal wastewater network systems and within wastewater treatment plants (WWTPs). This study assessed mass flows of 26 PFAS in a wastewater network and WWTP, to provide new insights into their sources, transport, and fate in different treatment steps. Wastewater and sludge samples were collected from pumping stations and the main WWTP in Uppsala, Sweden. PFAS composition profiles and mass flows were used to identify sources within the sewage network. Wastewater from one pumping station showed elevated concentrations of C 3 -C 8 PFCA, likely caused by an industrial source, and two stations had elevated concentrations of 6:2 FTSA, probably originating from a nearby firefighter training facility. Within the WWTP, short-chain PFAS dominated in wastewater, whereas long-chain PFAS dominated in sludge. The ratio of perfluoroalkyl sulfonates (PFSA) and ethylperfluorooctanesulfonamidoacetic acid (EtFOSAA) to ∑ 26 PFAS decreased during the WWTP process, likely due to sorption to sludge, but also transformation (EtFOSAA). Overall, PFAS were not efficiently removed in the WWTP, with mean removal efficiency of 10 ± 68% for individual PFAS, resulting in discharge of 7000 mg d -1 ∑ 26 PFAS into the recipient. This shows that conventional WWTPs are inefficient in removing PFAS from wastewater and sludge, so advanced treatment techniques are needed., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interestsLutz Ahrens reports financial support was provided by Uppsala Water and Waste AB, Sweden., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

We investigate intramolecular singlet fission (iSF) of spiro-linked azaacene heterodimers by time-resolved spectroscopy and quantum chemical calculations. Combining two different azaacenes through a nonconjugated linker using condensation chemistry furnishes azaacene heterodimers. Compared to their homodimers, iSF quantum yields are improved at an extended absorption range. The driving force of iSF, the energy difference Δ E iSF between the S 1 state and the correlated triplet pair 1 (TT), is tuned by the nature of the heterodimers. iSF is exothermic in all of the herein studied molecules. The overall quantum yield for triplet exciton formation reaches approximately 174%. This novel concept exploits large energy differences between singlet electronic states in combination with spatially fixed chromophores, which achieves efficient heterogeneous iSF, if the through-space interaction between the chromophores is minimal.

In household wastewater, a large proportion of organic micropollutants (OMPs) load is attributed to human urine. OMPs could pose a risk to human and environmental health when urine collected in source-separating sanitation systems is recycled as crop fertiliser. This study evaluated degradation of 75 OMPs in human urine treated by a UV-based advanced oxidation process. Fresh urine and water samples were spiked with a broad range of OMPs and fed into a photoreactor equipped with a UV lamp (185 and 254 nm) that generated free radicals in situ. Degradation rate constant and the energy required to degrade 90% of all the OMPs in both matrices were determined. At a UV dose of 2060 J m -2 , average ΣOMP degradation of 99% (±4%) in water and 55% (±36%) in fresh urine was achieved. The energy demand for removal of OMPs in water was <1500 J m -2 , but for removal of OMPs in urine at least 10-fold more energy was needed. A combination of photolysis and photo-oxidation can explain the degradation of OMPs during UV treatment. Organic substances (e.g. urea, creatinine) likely inhibited degradation of OMPs in urine by competitively absorbing UV-light and scavenging free radicals. There was no reduction in the nitrogen content of urine during treatment. In summary, UV treatment can reduce the load of OMPs to urine recycling sanitation systems., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Foam fractionation is becoming increasingly popular as a treatment technology for water contaminated with per- and polyfluoroalkyl substances (PFAS). At many existing wastewater treatment facilities, particularly in aerated treatment steps, foam formation is frequently observed. This study aimed to investigate if foam fractionation for the removal of PFAS could be integrated with such existing treatment processes. Influent, effluent, water under the foam, and foam were sampled from ten different wastewater treatment facilities where foam formation was observed. These samples were analyzed for the concentration of 29 PFAS, also after the total oxidizable precursor (TOP) assay. Enrichment factors were defined as the PFAS concentration in the foam divided by the PFAS concentration in the influent. Although foam partitioning did not lead to decreased ∑PFAS concentrations from influent to effluent in any of the plants, certain long-chain PFAS were removed with efficiencies up to 76%. Moreover, ∑PFAS enrichment factors in the foam ranged up to 10 5 , and enrichment factors of individual PFAS ranged even up to 10 6 . Moving bed biofilm reactors (MBBRs) were more effective at enriching PFAS in the foam than activated sludge processes. Altogether, these high enrichment factors demonstrate that foam partitioning in existing wastewater treatment plants is a promising option for integrated removal. Promoting foam formation and removing foam from the water surface with skimming devices may improve the removal efficiencies further. These findings have important implications for PFAS removal and sampling strategies at wastewater treatment plants., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Contamination of soil and water systems by per- and polyfluoroalkyl substances (PFAS) due to uncontrolled use of aqueous film-forming foams (AFFFs) at firefighting training sites at civilian and military airports is a universal issue and can lead to significant human health and environmental impacts. Remediation of these sites is often complex but necessary to alleviate the PFAS burden and minimise the risks of exposure by eliminating the hotspot/source from which the PFAS spreads. This study presents a probabilistic cost-benefit analysis (CBA) for evaluating PFAS remediation alternatives, which includes monetisation of both direct costs and benefits as well as externalities. The method is applied for a case study to compare five remediation alternatives for managing PFAS contaminated soil at Stockholm Arlanda Airport in Sweden. The social profitability, or the net present value (NPV), of each remediation alternative was calculated in comparison to two reference alternatives - 'total excavation' of the site (Alt 0) or 'do nothing'. Sensitivity analyses and model scenarios were tested to account for uncertainties, including small or large PFAS spreading and simulating different values for the magnitude of annual avoided cost of inaction (i.e., aggregate benefit) from PFAS remediation. In comparison to total excavation, four of the five studied remediation alternatives resulted in a positive mean NPV. Excavation and stabilization/solidification of the hotspot on-site combined with stabilization using activated carbon for the rest of site (Alt 2) had the highest NPV for both spreading scenarios, i.e., Alt 2 was the most socially profitable alternative. Simulations of the annual avoided cost of inaction enabled estimation of the breakeven point at which a remediation alternative becomes socially profitable (NPV > 0) compared to 'do nothing'. Alt 2 had the lowest breakeven point: 7.5 and 5.75 millions of SEK/year for large and small spreading, respectively., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

We present the synthesis of two sets of spiro-connected azaacene dimers. Their geometry and electronic coupling are critically determined by a secondary linker, i. e., an etheno- and an ethano-bridge. The core fragment of the etheno-bridged dimer corresponds to a conformationally locked cis-stilbene. Optoelectronic properties, single crystal X-ray structures and stability with respect to oxidation of the conjugated and non-conjugated dimers are reported and compared. The conjugated dimers exhibit smaller optical gaps and bathochromically shifted absorption maxima, but are prone to unexpected oxygen addition, dearomatizing one of the azaacene substituents., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Persistent, mobile, and toxic (PMT) substances have recently garnered increased attention by environmental researchers, the water sector and environmental protection agencies. In this study, acute and chronic species sensitivity distributions (SSDs) were retrieved from literature data for previously quantified contaminants of emerging concern (CECs) in Swedish surface waters (n = 92) and risk quotients (RQ) were calculated. To better understand the characteristics of the detected CECs in non-urban lake sites (n = 71), these compounds were checked against established criteria for potentially toxic PMs (PM(T)s) and occurrence in the aquatic environment, respectively. For the CECs with missing SSDs (n = 15 [acute], n = 41 [chronic]), ecotoxicity data were extracted for eight taxonomic groups, and if data were sufficient (n ≥ 3), SSDs were derived. The retrieved and newly developed SSDs were then used in an environmental hazard assessment (EHA) in the investigated Swedish rivers and lakes. In the rivers, 8 CECs had RQ> 1 in at least one location, and 20 CECs posed a moderate risk (0.01 < RQ < 1). In total, 21 of the 71 detected substances had already been identified as PM(T)/vPvM substances. Our study shows the importance of studying field data at large spatial scale to reveal potential environmental hazards far from source areas., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

In this study, we present a method for directly coating monoliths with a CeO 2 /CuO catalyst using the urea-nitrate combustion method. The catalyst was characterized by means of XRD, SEM/EDX, and EPR measurements. Experimental results are described, when this catalyst was used for the preferential oxidation of CO. The catalytic activity for the CO-PrOx-reaction was measured by recording CO conversion as a function of the reaction temperature in a hydrogen-rich gas mixture in the presence and absence of water vapor. In a long-term test of over 310 h, the catalyst's long-term stability was demonstrated. Direct coating is shown to be a promising approach by which a larger amount of catalyst can be deposited onto the monolith in a single step than would be possible with washcoats., (© 2023. The Author(s).)

Foam fractionation has recently attracted attention as a low-cost and environmentally benign treatment technology for water contaminated with per- and polyfluoroalkyl substances (PFAS). However, data on the mass balance over the foam fractionation process are scarce and when available, gaps in the mass balance are often identified. This study verified the high treatment efficiency of a pilot-scale foam fractionation system for removal of PFAS from industrial water contaminated with aqueous film-forming foam. ΣPFAS removal reached up to 84 % and the removal of perfluorooctane sulfonic acid (PFOS) up to 97 %, but the short-chain perfluorobutanoic acid (PFBA) was only removed with a mean efficiency of 1.5 %. In general, mobile short-chain PFAS were removed less efficiently when the perfluorocarbon chain length was below six for carboxylic acids and below five for sulfonic acids. Fluctuations in treatment efficiency due to natural variations in the chemistry of the influent water were minor, confirming the robustness of the technology, but significant positive correlations between PFAS removal and influent metal concentration and conductivity were observed. Over all experiments, the mass balance closure did not differ significantly from 100 %. Nonetheless, PFAS sorption to the walls of the reactor was measured, as well as high PFAS emissions by the air exiting the reactor. PFAS emissions in aerosols correlated positively with mass balance closure. The elevated aerial PFAS concentrations measured in the experimental facility have implications for worker safety and prevention of PFAS-emissions to the atmosphere, and demonstrate the importance of installing appropriate filters on the air outlet of foam fractionation systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Per- and polyfluoroalkyl substances (PFAS) are recognized as persistent pollutants that have been found in drinking water sources on a global scale. Semi-permeable membrane treatment processes such as reverse osmosis and nanofiltration (NF) have been shown effective at removing PFAS, however, disposal of PFAS laden concentrate is problematic. Without treatment of the concentrate, PFAS is released into the environment. The present work examined a novel PFAS removal scheme for drinking water using NF filtration with treatment of the resulting NF concentrate via foam fractionation (FF) with and without co-surfactants. The NF-pilot removed 98% of PFAS from AFFF contaminated groundwater producing permeate with 1.4 ng L -1 total PFAS. Using FF resulted in ∑PFAS removal efficiency of 90% from the NF concentrate and with improved removal of 94% with addition of cationic co-surfactant. The resulting foamate composed approximately 2% of the NF feedwater volume and contained greater than 3000 ng L -1 PFAS or 41 times greater than the NF feedwater. Addition of the cationic co-surfactant to the FF process resulted in increased removal efficiency of the shorter chain PFAS, specifically 37% for PFPeA, 9% for PFHxA, and 34% for PFBS thus attaining 59%, 99% and 96% removal efficiency, respectively. PFOA, PFPeS, PFHxS, PFOS each attained 99% FF removal with or without co-surfactant addition., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

The pH-dependent soil-water partitioning of six perfluoroalkyl substances (PFASs) of environmental concern (PFOA, PFDA, PFUnDA, PFHxS, PFOS and FOSA), was investigated for 11 temperate mineral soils and related to soil properties such as organic carbon content (0.2-3%), concentrations of Fe and Al (hydr)oxides, and texture. PFAS sorption was positively related to the perfluorocarbon chain length of the molecule, and inversely related to solution pH for all substances. The negative slope between log K d and pH became steeper with increasing perfluorocarbon chain length of the PFAS (r 2  = 0.75, p ≤ 0.05). Organic carbon (OC) alone was a poor predictor of the partitioning for all PFASs, except for FOSA (r 2  = 0.71), and the OC-normalized PFAS partitioning, as derived from organic soil materials, underestimated PFAS sorption to the soils. Multiple linear regression suggested sorption contributions (p ≤ 0.05) from OC for perfluorooctane sulfonate (PFOS) and FOSA, and Fe/Al (hydr)oxides for PFOS, FOSA, and perfluorodecanoate (PFDA). FOSA was the only substance under study for which there was a statistically significant correlation between its binding and soil texture (silt + clay). To predict PFAS sorption, the surface net charge of the soil organic matter fraction of all soils was calculated using the Stockholm Humic Model. When calibrated against charge-dependent PFAS sorption to a peat (Oe) material, the derived model significantly underestimated the measured K d values for 10 out of 11 soils. To conclude, additional sorbents, possibly including silicate minerals, contribute to the binding of PFASs in soil. More research is needed to develop geochemical models that can accurately predict PFAS sorption in soils., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Engineering living bone tissue of defined shape on-demand has remained a challenge. 3D bioprinting (3DBP), a biofabrication process capable of yielding cell constructs of defined shape, when combined with developmental engineering can provide a possible path forward. Through the development of a bioink possessing appropriate rheological properties to carry a high cell load and concurrently yield physically stable structures, printing of stable, cell-laden, single-matrix constructs of anatomical shapes is realized without the need for fugitive or support phases. Using this bioink system, constructs of hypertrophic cartilage of predesigned geometry are engineered in vitro by printing human mesenchymal stromal cells at a high density to drive spontaneous condensation and implanted in nude mice to evoke endochondral ossification. The implanted constructs retain their prescribed shape over a 12-week period and undergo remodeling to yield ossicles of the designed shape with neovascularization. Microcomputed tomography, histological, and immunohistochemistry assessments confirm bone tissue characteristics and the presence of human cells. These results demonstrate the potential of 3DBP to fabricate complex bone tissue for clinical application., (© 2023 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH.)

Per- and polyfluoroalkyl substances (PFAS) are persistent synthetic contaminants that are present globally in water and are exceptionally difficult to remove during conventional water treatment processes. Here, we demonstrate a practical treatment train that combines foam fractionation to concentrate PFAS from groundwater and landfill leachate, followed by an electrochemical oxidation (EO) step to degrade the PFAS. The study combined an up-scaled experimental approach with thorough characterization strategies, including target analysis, PFAS sum parameters, and toxicity testing. Additionally, the EO kinetics were successfully reproduced by a newly developed coupled numerical model. The mean total PFAS degradation over the designed treatment train reached 50%, with long- and short-chain PFAS degrading up to 86 and 31%, respectively. The treatment resulted in a decrease in the toxic potency of the water, as assessed by transthyretin binding and bacterial bioluminescence bioassays. Moreover, the extractable organofluorine concentration of the water decreased by up to 44%. Together, these findings provide an improved understanding of a promising and practical approach for on-site remediation of PFAS-contaminated water., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Recovery and reuse of nutrients is a major challenge in agriculture. A new process contributing to a circular economy is the anaerobic digestion of food waste, which is a sustainable way of recycling nutrients as the digestate can be used as fertiliser in agriculture and horticulture. However, the digestate may be polluted with contaminants of emerging concern (CECs) that can be circulated back into the food chain, posing a risk to the environment and human health. In this work, the nutrient solution was spiked with 18 selected CECs frequently detected in food waste biogas facilities, and subsequent uptake and fate of these CECs were evaluated in pak choi grown in two different nutrient solutions (mineral and organic). All spiked compounds except two (propylparaben, fenbendazole) were taken up by pak choi plants, with perfluorobutanoic acid (PFBA) and sertraline displaying the highest concentrations (270 and 190 μg/kg fresh weight, respectively). There were no statistically significant differences in uptake between mineral and organic nutrient solutions. Uptake of per- and polyfluoroalkyl substances (PFAS) was negatively correlated with perfluorocarbon chain length and dependent on the functional group (r = -0.73). Sixteen transformation products (TPs) were tentatively identified using suspect screening, most of which were Phase II or even Phase III metabolites. Six of these TPs were identified for the first time in plant metabolism and their metabolic pathways were considered., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The impact of perfluoroalkyl and polyfluoroalkyl substances on microbial communities is challenging to investigate in situ because of the complexity and dynamics of natural ecosystems. In the present study, four microcosms were established to explore the impact of perfluorooctanoate (PFOA) on bacterial communities in riverine and marine settings. PFOA distribution between the aqueous and sedimentary phases fluctuated in both PFOA-amended and unamended control systems. PFOA was more rapidly partitioned into the sediment in marine than in riverine microcosms. Differences in iron concentration and salinity may influence PFOA exchange between water and sediment. In marine microcosms, the alpha diversity of bacterial communities was significantly correlated to PFOA concentration. PFOA tended to correlate more strongly with bacterial community composition in water than in sediment. At the whole system level, Lefse's analysis indicated Algoriphagus halophilus as biomarkers for PFOA exposure in both riverine and marine systems, and the family Flavobacteriaceae were also more abundant in the exposed systems. In terms of temporal variation (comparison between three time points in the systems), metastat analysis showed great variability of potential PFOA-sensitive bacteria at the genus level. As such, most PFOA-sensitive genera were transitory and variable and existed for a short term in different systems (river, sea, blank, and experiment) and phases. Compared with other PFOA-sensitive genera, we suggest that further research is carried out to explore the use of Limnobacter as a bioindicator for temporal monitoring of PFOA pollution., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)