Search

Background This study aims to verify Bolton's values for tooth size ratios and to evaluate possible relationships to different occlusal traits using precise digital measurement methods. Materials and methods Including 1000 consecutively selected patients from three study centres a digital, partially automated model analysis was performed utilizing the software OnyxCeph. The measurements comprised tooth width for calculation of anterior (AR) and overall ratio (OR) as a percentage, arch width, length, perimeter, overjet, overbite, space analysis in millimetre and the assessment of the angle classification. Results AR and OR were significantly increased compared to Bolton's ratios of 77.2% (AR) and 91.3% (OR). In the gender comparison, male patients showed larger tooth size ratios, especially in the OR. Patients with Angle Class II/1 and II/2 had smaller tooth size ratios than patients with Angle Class III and I. Thus, patients with Angle Class II/1 had the largest tooth diameters in all maxillary teeth and with Angle Class II/2 the smallest tooth sizes in the mandible. The largest tooth widths in the lower jaw were observed in the Angle Class III patient group. Furthermore, a negative correlation from AR/OR to overjet, overbite, and available space in lower jaw as well as a positive correlation to available space in upper jaw was detected. Conclusions There is a clear correlation between the tooth size ratios and the present dysgnathia as well as other orthodontically relevant occlusal traits. This prior knowledge about our patients is extremely important to create an individualized treatment plan and enable sufficient occlusion. To achieve a functionally good occlusion with correct overjet and overbite, it is essential that the maxillary and mandibular teeth are proportional in size. Any deviation from the ideal patient in terms of tooth size, number, shape, or arch must be considered in the pre-therapeutic treatment plan in combination with the existing dysgnathia in order to be able to achieve a stable anterior and posterior occlusion with appropriate adjustments to the therapy post-therapeutically. [ABSTRACT FROM AUTHOR]

Motion is a source of degradation in positron emission tomography (PET)/computed tomography (CT) images. As the PET images represent the sum of information over the whole respiratory cycle, attenuation correction with the help of CT images may lead to false staging or quantification of the radioactive uptake especially in the case of small tumors. We present an approach avoiding these difficulties by respiratory-gating the PET data and correcting it for motion with optical flow algorithms. The resulting dataset contains all the PET information and minimal motion and, thus, allows more accurate attenuation correction and quantification. Index Terms--Gating, lung, motion, motion correction, optical flow, PET, PET/CT.

The temporal behavior of the molecular etching product SiF4 in fluorocarbon-based plasmas used for the dry etching of ultra low-k (ULK) materials has been brought into connection with the polymer deposition on the surface during plasma treatment within the scope of this work. For this purpose, time-resolved measurements of the density of SiF4 have been performed by quantum cascade laser absorption spectroscopy. A quantification of the non-linear time dependence was achieved by its characterization via a time constant of the decreasing SiF4 density over the process time. The time constant predicts how fast the stationary SiF4 density is reached. The higher the time constant is, the thicker the polymer film on top of the treated ultra low-k surface. A correlation between the time constant and the ULK damage was also found. ULK damage and polymer deposition were proven by Variable Angle Spectroscopic Ellipsometry and X-ray Photoelectron Spectroscopy. In summary, the observed decay of the etching product concentration over process time is caused by the suppressed desorption of the SiF4 molecules due to a more dominant adsorption of polymers. [ABSTRACT FROM AUTHOR]

Sensitive trace gas detection plays an important role in current challenges occurring in areas such as industrial process control and environmental monitoring. In particular, for medical breath analysis and for the detection of illegal substances, e.g., drugs and explosives, a selective and sensitive detection of trace gases in real-time is required. We report on a compact and transportable multi-component system (RES-Q-Trace) for molecular trace gas detection based on cavity-enhanced techniques in the mid-infrared (MIR). The RES-Q-Trace system can operate four independent continuous wave quantum or interband cascade lasers each combined with an optical cavity. Twice the method of off-axis cavity-enhanced absorption spectroscopy (OA-CEAS) was used, twice the method of optical feedback cavity-enhanced absorption spectroscopy (OF-CEAS), respectively. Multi-functional software has been implemented (i) for the general system control; (ii) to drive the four different laser sources and (iii) to analyze the detector signals for concentration determination of several molecular species. For the validation of the versatility and the performance of the RES-Q-Trace instrument the species NO, N2O, CH4, C2H4 and C3H6O, with relevance in the fields of breath gas analysis and the detection of explosives have been monitored in the MIR with detection limits at atmospheric pressure in the ppb and ppt range. [ABSTRACT FROM AUTHOR]

The recent availability of thermoelectrically cooled pulsed and continuous wave quantum and inter-band cascade lasers in the mid-infrared spectral region has led to significant improvements and new developments in chemical sensing techniques using in-situ laser absorption spectroscopy for plasma diagnostic purposes. The aim of this article is therefore two-fold: (i) to summarize the challenges which arise in the application of quantum cascade lasers in such environments, and, (ii) to provide an overview of recent spectroscopic results (encompassing cavity enhanced methods) obtained in different kinds of plasma used in both research and industry. [ABSTRACT FROM AUTHOR]

In this paper, first measurements with a particularly designed quantum-cascade-laser (QCL) arrangement for application in semiconductor industrial environments for in situ wafer-to-wafer etch monitoring are reported. The combination of QCLs and infrared absorption spectroscopy (QCLAS) opens up new possibilities for plasma process monitoring and control. In silicon etch plasmas, concentrations of the etch product SiF4 were measured real time in an industrial-production environment. The comparison of the results with inline data of the processed wafers shows a correlation between the amount of produced SiF4 and the measures of the trench depth and the bottom void. Furthermore, it is shown that the characteristics of the refractive index of Si and SiO2 in the mid-infrared can be used to determine etch rates of SiO2 and Si wafers during the processing. [ABSTRACT FROM AUTHOR]

Because heme is a major iron-containing molecule in vertebrates. the ability to use heme-bound iron is a determining factor in successful infection by bacterial pathogens. Until today, all known enzymes performing iron extraction from heme did so through the rupture of the tetrapyrrol skeleton. Here, we identified 2 Escherichia coli paralogs, YfeX and EfeB, without any previously known physiological functions. YfeX and EfeB promote iron extraction from heme preserving the tetrapyrrol ring intact. This novel enzymatic reaction corresponds to the deferrochelation of the heme. YfeX and EfeB are the sole proteins able to provide iron from exogenous heme sources to E. coli. YfeX is located in the cytoplasm. EfeB is periplasmic and enables iron extraction from heme in the periplasm and iron uptake in the absence of any heme permease. YfeX and EfeB are widespread and highly conserved in bacteria. We propose that their physiological function is to retrieve iron from heme. [ABSTRACT FROM AUTHOR]

Respiratory gating is used for reducing the effects of breathing motion in a wide range of applications from radiotherapy treatment to diagnostical imaging. Different methods are feasible for respiratory gating. In this study seven gating methods were developed and tested on positron emission tomography (PET) listmode data. The results of seven patient studies were compared quantitatively with respect to motion and noise. (1) Equal and (2) variable time-based gating methods use only the time information of the breathing cycle to define respiratory gates. (3) Equal and (4) variable amplitude-based gating approaches utilize the amplitude of the respiratory signal. (5) Cycle-based amplitude gating is a combination of time and amplitude-based techniques. A baseline correction was applied to methods (3) and (4) resulting in two new approaches: Baseline corrected (6) equal and (7) variable amplitude-based gating. Listmode PET data from seven patients were acquired together with a respiratory signal. Images were reconstructed applying the seven gating methods. Two parameters were used to quantify the results: Motion was measured as the displacement of the heart due to respiration and noise was defined as the standard deviation of pixel intensities in a background region. The amplitude-based approaches (3) and (4) were superior to the time-based methods (1) and (2). The improvement in capturing the motion was more than 30% (up to 130%) in all subjects. The variable time (2) and amplitude (4) methods had a more uniform noise distribution among all respiratory gates compared to equal time (1) and amplitude (3) methods. Baseline correction did not improve the results. Out of seven different respiratory gating approaches, the variable amplitude method (4) captures the respiratory motion best while keeping a constant noise level among all respiratory phases. [ABSTRACT FROM AUTHOR]

In the present study, the influence of human luteinizing hormone (hLH) on the growth and the CA 125 secretion of primary ovarian carcinoma cell cultures derived from 11 previously untreated patients was investigated. Two different patterns of in vitro growth of unstimulated ovarian carcinoma cells could be detected: 5 cell cultures in which no changes of cell number were observed during an incubation period of 6 days (group A) and 6 cell cultures which grew without any hormonal support (group B). All tumors of group A showed enhanced cell proliferation when hLH was added to the culture medium, reaching a maximum at dosages of 100 mlU/ml on day 2 after incubation, while such an effect was not observed in group B. In most cases, no positive correlation was found between hLH-induced cell growth and CA 125 release. Our findings demonstrated a dose-dependent hLH-induced stimulation of epithelial ovarian tumors in vitro. Copyright © 1995 S. Karger AG, Basel [ABSTRACT FROM AUTHOR]

In this study the role of gonadotropins for the induction of ovarian tumors in rats was examined. The rats were castrated and one ovary was transplanted under the splenic capsule. Rats remained untreated or received a GnRH analog for gonadotropin suppression either immediately, 90 or 180 days after castration. Under these conditions the untreated rats developed ovarian tumors while the treated rats only developed tumors when the stimulation of gonadotropins lasted for more than 90 days. The first appearing tumors were theca cell tumors while during the further course of the experiment the granulosa cell compartment increased; however, no histological signs of malignancy could be detected in these tumors. GnRH analogs could block the induction of granulosa cell tumors when administered 150 days after transplantation. After a period of 210-240 days the tumors grew independently of elevated LH and FSH levels. The causes of this growth autonomy need to be studied further. Copyright © 1995 S. Karger AG, Basel [ABSTRACT FROM AUTHOR]

In situ measurements are reported giving insight into the plasma chemical conversion of the precursor BCl3 in industrial applications of boriding plasmas. For the online monitoring of its ground state concentration, quantum cascade laser absorption spectroscopy (QCLAS) in the mid-infrared spectral range was applied in a plasma assisted chemical vapor deposition (PACVD) reactor. A compact quantum cascade laser measurement and control system (Q-MACS) was developed to allow a flexible and completely dust-sealed optical coupling to the reactor chamber of an industrial plasma surface modification system. The process under the study was a pulsed DC plasma with periodically injected BCl3 at 200 Pa. A synchronization of the Q-MACS with the process control unit enabled an insight into individual process cycles with a sensitivity of 10-6 cm-1·Hz-1/2. Different fragmentation rates of the precursor were found during an individual process cycle. The detected BCl3 concentrations were in the order of 1014 molecules·cm-3. The reported results of in situ monitoring with QCLAS demonstrate the potential for effective optimization procedures in industrial PACVD processes. [ABSTRACT FROM AUTHOR]