Search

A novel Shutdown dose rate benchmark experiment has been performed at Joint European Torus (JET) machine during the last high performance Deuterium-Deuterium (DD) campaign in preparation of future ...

A calibration of the JET neutron detectors was carried out prior to the upcoming deuterium-tritium experimental campaign. Two Compact DT neutron generators (NGs) were purchased for this purpose from VNIIA, Russia. These generators are capable of producing approximately 2 × 108 neutrons/s with a DT fusion energy spectrum. Preceding the in-vessel calibration measurements, these compact generators were tested and fully characterised at the UK's National Physical Laboratory (NPL). In order to support the characterisation measurements, detailed neutronics models were developed of the NGs, monitoring detectors and remote handling (RH) apparatus. Neutron spectra calculated from these models have been used to help determine NPL long counter efficiencies and effective centres, as well as NPL reference iron and aluminium activation foil reaction rates. The neutron emission rate has been measured for both generators as a function of angle using absolutely calibrated long counters and the relative emission rate by monitoring single crystal diamond detectors. The measured anisotropy profile is shown to be reproducible with a detailed NG MCNP model. Consequently, the neutron source routine and the MCNP model of the NGs can be reliably used for the analysis of the in-vessel calibration at JET.

At the Joint European Torus (JET) the ex-vessel fission chambers and in-vessel activation detectors are used as the neutron production rate and neutron yield monitors respectively. In order to ensure that these detectors produce accurate measurements they need to be experimentally calibrated. A new calibration of neutron detectors to 14 MeV neutrons, resulting from deuterium–tritium (DT) plasmas, is planned at JET using a compact accelerator based neutron generator (NG) in which a D/T beam impinges on a solid target containing T/D, producing neutrons by DT fusion reactions. This paper presents the analysis that was performed to model the neutron source characteristics in terms of energy spectrum, angle–energy distribution and the effect of the neutron generator geometry. Different codes capable of simulating the accelerator based DT neutron sources are compared and sensitivities to uncertainties in the generator's internal structure analysed. The analysis was performed to support preparation to the experimental measurements performed to characterize the NG as a calibration source. Further extensive neutronics analyses, performed with this model of the NG, will be needed to support the neutron calibration experiments and take into account various differences between the calibration experiment and experiments using the plasma as a source of neutrons.