Search

To lay a solid basis for prosperity and competitiveness, countries should achieve balance in the three fundamental aspects: energy availability, energy affordability and ecological balance. Nuclear energy has attracted international interest as one of the most crucial environmental quality strategies. The objective of this study is to analyze the non-linear link between nuclear energy and environmental quality in the top-10 nuclear energy consumer countries (USA, China, Russia, France, Canada, Spain, Sweden, South Korea, Ukraine, and Germany). Earlier research employed panel data methodologies to examine the linkage between nuclear energy and the environment, despite the fact that many nations did not independently demonstrate such a correlation. On the alternative, this study uses a novel approach known as ‘Quantile-on-Quantile,’ which allows for the analysis of time-series dependence in each country by giving universal yet country-specific insights into the relationship between the variables. Estimates show that the consumption of nuclear energy improves environmental quality by lowering ecological footprint in the majority of the nations studied at certain quantiles of data. Moreover, the data demonstrate that the degree of asymmetries between our variables changes by nation, emphasizing the importance of policymakers exercising caution when adopting nuclear energy and environmental quality regulations.

A novel concept is described here that utilizes externally applied heat to a solid rod of reconstituted tobacco biomass to form a stream of aerosol under progressively oxygen-deficient atmosphere. The boundary of auto-ignition was determined at oxygen concentrations of 0%, 5%, 10%, and 21% and then the effects of these different atmospheres on various parameters were studied. Experimental results indicated that the ignition temperature decreased with the increase of oxygen concentration and a negative temperature coefficient (NTC) for atmosphere with oxygen was observed at before but close to ignition temperature. Significant differences in the yields of CO and CO2 between oxygen and oxygen-free atmosphere were observed. The mass of aerosol produced under an inert atmosphere and reduced-oxygen atmosphere were characterized with selected volatile and semi-volatile components, phenols, aldehydes, and other organic compounds of interests. In addition, higher oxygen concentration resulted in higher bulk and surface oxygen content of solid-phase residue, the reduction of carbon and hydrogen element content and related functional groups, and the content of inorganic compounds also exhibited an increase with oxygen concentration. By systematically changing oxygen concentrations of the biomass bed with increasing temperatures, an aerosol stream of controlled chemical composition and yields could be formed without leading to ignition. Key chemical markers of inhalation harm were measured and compared to each other under different degrees close to combustion. Studying reconstituted tobacco or other biomass materials in such a way could provide alternative and useful information in the design heated biomass aerosol generators.

A lit cigarette forms a positive and negative pressure zone by a puff with respect to the position of its paper burn line. Smoke aerosols generated from the two zones are then pulled through the rod under the puff to form the mainstream smoke. This phenomenon is fundamental to the thermophysics and the resultant chemical composition of the mainstream smoke. In this study, we created two different airflow pathways inside a heated tobacco rod by a puff, and investigated the differences in aerosol formation and its chemical compositions. The two different pressure-induced conditions, one through an open-ended tobacco rod (marked as HNB, a label of a designed airflow pathway of commercial heated tobacco products called heat-not-burn prior), and the other through a closed-ended tobacco rod (marked as NSC, a label of a novel-designed airflow pathway of heated tobacco products), were compared for their aerosol collected mass (ACM), the contents of nicotine, water and added aerosol agents such as propylene glycol (PG) and glycerol (VG), as well as selected aldehydes and ketones in the mainstream aerosol. Aerosol particle distribution and the heated temperature along different rod locations were also compared during a puff. The results indicated marked differences in the aerosol formation processes between the two HNB and NSC systems. The transfer ratios of the main aerosol components were significantly higher for the NSC; the levels of formaldehyde and acetaldehyde were significantly lower under the NSC than the HNB condition. There were also significant differences for the aerosol particle number concentration (APNC) and count median diameter (CMD) for the two systems. The lack of convective heat transfer in the aerosol formation under the NSC condition resulted in a relatively stable thermal aerosol generation zone, reflected by the temperature difference between the two systems in the selected locations. The NSC mode of tobacco heating thus offers a novel and enhanced aerosol generation for heat tobacco product designs.

Abstract While therapies such as chemotherapy combined with immunotherapy, sacituzumab govitecan, and PARP inhibitors are available for metastatic TNBC, on disease progression after these therapies, the mainstay of therapy is chemotherapy. Apatinib is a small-molecule tyrosine kinase inhibitor that has promising anti-angiogenesis and antitumor activity for TNBC. We aimed to evaluate the safety and efficacy of adding apatinib to chemotherapy in patients with advanced TNBC with failed first/second-line treatment. A total of 66 patients were randomly assigned, in a 1:1 ratio, to receive vinorelbine or vinorelbine with apatinib in 28-day cycles. The primary endpoint was progression-free survival (PFS). Secondary endpoints included overall survival (OS), overall response rate (ORR) and safety. 33 received apatinib plus vinorelbine and 32 received vinorelbine (1 was withdrawal). Median PFS was significantly longer in the apatinib plus vinorelbine group than in the vinorelbine group (3.9 months vs. 2.0 months; hazard ratio, 1.82; 95% confidence interval [CI], 1.06 to 3.11; P = 0.026). Median OS was 11.5 months with apatinib plus vinorelbine and 9.9 months with vinorelbine (HR,1.01; 95% CI, 0.51 to 1.97; P = 0.985). The ORR was 9.1% in the apatinib plus vinorelbine group and 6.3% in the vinorelbine group (P = 0.667). The most common treatment-related hematologic grade 3–4 adverse events in apatinib plus vinorelbine group, were leukopenia, granulocytopenia, anemia, and thrombocytopenia. no treatment-related nonhematologic grade 4 adverse events or treatment-related deaths were observed. Collectively, adding apatinib to vinorelbine shows a promising benefit in PFS compared to vinorelbine monotherapy, with an excellent toxicity profile, warranting further exploration.

This study extends the social influence factor in the Unified Theory of Acceptance and Use of Technology (UTAUT) model by delineating it into coercive, normative, and mimetic pressures based on institutional theory. It investigates the role of each institutional pressure in influencing the behavioural intention of accounting lecturers in Malaysia's public universities to use Information and Communications Technology (ICT)-enhanced student-centred teaching methods. Using a purposive sampling method, self-report questionnaires were distributed to accounting lecturers in Malaysia's public universities offering undergraduate accounting programmes. This resulted in 114 usable questionnaires. The hypothesized relationships were tested using structural equation modeling via Smart-PLS software. Only coercive and normative pressures were found to have a significant and positive influence on behavioural intention. Mimetic pressures had an insignificant influence on behavioural intention. The findings of this study are useful to authorities in the higher education sector and practitioners who have been encouraging the student-centred teaching movement. This study provides further enlightenment on which social factors yield the most effects at the present moment and which social factors need greater work to yield better effects on increasing lecturers' behavioural intentions as a whole.

To understand the coloring mechanism in black radish, the integrated metabolome and transcriptome analyses of root skin from a black recombinant inbred line (RIL 1901) and a white RIL (RIL 1911) were carried out. A total of 172 flavonoids were detected, and the analysis results revealed that there were 12 flavonoid metabolites in radish root skin, including flavonols, flavones, and anthocyanins. The relative concentrations of most flavonoids in RIL 1901 were higher than those in RIL 1911. Meanwhile, the radish root skin also contained 16 types of anthocyanins, 12 of which were cyanidin and its derivatives, and the concentration of cyanidin 3-o-glucoside was very high at different development stages of black radish. Therefore, the accumulation of cyanidin and its derivatives resulted in the black root skin of radish. In addition, a module positively related to anthocyanin accumulation and candidate genes that regulate anthocyanin synthesis was identified by the weighted gene co-expression network analysis (WGCNA). Among them, structural genes (RsCHS, RsCHI, RsDFR, and RsUGT75C1) and transcription factors (TFs) (RsTT8, RsWRKY44L, RsMYB114, and RsMYB308L) may be crucial for the anthocyanin synthesis in the root skin of black radish. The anthocyanin biosynthesis pathway in the root skin of black radish was constructed based on the expression of genes related to flavonoid and anthocyanin biosynthesis pathways (Ko00941 and Ko00942) and the relative expressions of metabolites. In conclusion, this study not only casts new light on the synthesis and accumulation of anthocyanins in the root skin of black radish but also provides a molecular basis for accelerating the cultivation of new black radish varieties.

Zinc (Zn) is an essential micronutrient that participates in several plant metabolisms. Soil application of Zn is an effective strategy to increase the productivity and Zn concentration in maize grains, but the effect of Zn fertilizers on the nutrients uptake and biofortification still needs more studies. In this study, a greenhouse plot experiment was conducted to evaluate the effect of the optimum Zn fertilizer doses (0, 5.7, and 11.4 kg ha−1) on the nutrients uptake and Zn biofortification of maize crops. Zn applications were found to increase significantly the transpiration rate; photosynthesis rate, Zn, and P concentration in the maize shoot at the VT (Tasseling) stage as well as the grain Zn and maize grain yield. P, Mg, and phytic acid (PA) concentration in grains was also increased with a Zn application of 11.4 kg ha−1. The PA/Zn molar ratio in grains decreased due to the Zn application doses as compared with the control treatment, but there was no significant difference between Zn 5.7 and 11.4 kg ha−1 doses, while Zn 5.7 kg ha−1 achieved a higher PA/Fe molar ratio in maize grains compared to other treatments. [ABSTRACT FROM AUTHOR]