Search

The effect of graphite powder on the machining characteristics in graphite-powder-mixed electrochemical discharge machining of microholes was still not clear. How the discharge mechanism changed with the addition of graphite powder into the electrolyte, which further led to changes in the morphology of the machined holes, remained to be revealed. In this study, a series of microhole machining experiments were conducted in glass. Comparisons of the discharge energy, microhole entrance diameter, hole taper, and tool electrode morphology after machining were made when machining in the electrolytes with and without graphite powder. Experimental results revealed that there were a lot of small pulse currents distributed on the current waveform when machining with the graphite-powder-mixed electrolyte. The average discharge energy of the small pulse current was 2.8 times as much as that of the general electrochemical discharge. After introducing graphite powder into the electrolyte, the entrance diameter of the hole became larger when the hole depth was deeper than 200 μm. The HAZ width increased with increasing hole depth at the voltage of 37–41 V, while it decreased at the voltage of 43 V. A reduction in hole taper angle with a range of 0.5° to 2.3° was achieved. In addition, after machining in electrolytes with and without graphite powder, the tool electrode surfaces showed different morphologies due to different discharges. [ABSTRACT FROM AUTHOR]

The use of flexible, built-in, ultra-high-frequency (UHF) antenna sensors is an effective method to solve the weak high-frequency electromagnetic wave signal sensing of partial discharge (PD) inside gas-insulated switchgears (GISs), and the compatibility of flexible UHF antenna sensor substrate materials and SF6/N2 mixtures is the key to the realization of a flexible UHF antenna sensor inside a GIS. Based on this, this paper builds an experimental platform for the compatibility of a 30% SF6/70% N2 gas mixture and a PD flexible UHF antenna sensor substrate and conducts compatibility experiments between the 30% SF6/70% N2 gas mixture and PD flexible UHF antenna sensor substrate under different temperatures in combination with the actual operating temperature range of the GIS. In this article, a Fourier transform infrared spectrometer, scanning electron microscope and X-ray photoelectron spectrometer were used to test and analyze the gas composition, the surface morphology and the elemental change in the PD flexible UHF antenna sensor substrate, respectively. PET material will be slightly oxidized under the environment of a 30% SF6/70% N2 gas mixture at 110 °C, PI material will generate metal fluoride under the environment of a 30% SF6/70% N2 gas mixture and only PDMS material will remain stable under the environment of a 30% SF6/70% N2 gas mixture; therefore, it is appropriate to use PDMS substrate in the development of flexible UHF antenna sensors. [ABSTRACT FROM AUTHOR]

Chronic obstructive pulmonary disease (COPD) is a complex and heterogeneous disease characterized by persistent airflow limitation but still lacking effective treatments. Perilla frutescens (L.) Britt. , an important traditional medicinal plant with excellent antioxidant and anti-inflammatory properties, is widely used for the treatment of respiratory disease in China. However, its protective activity and mechanism against COPD airway inflammation have not been fully studied. Here, the anti-inflammatory effects of the PLE were investigated, and its underlying mechanisms were then elucidated. The presented results suggested a notable effect of the PLE on airway inflammation of COPD, by significantly ameliorating inflammatory cell infiltration in lung tissue, lessening leukocytes (lymphocytes, neutrophils, and macrophages) and inflammatory mediators (interleukin 4 (IL-4), IL-6, IL-17A, interferon γ (IFN-γ), and tumor necrosis factor α (TNF-α)) in the bronchoalveolar lavage fluid (BALF) of cigarette smoke (CS)/lipopolysaccharide (LPS)-induced COPD mice in vivo and inhibiting the production of inflammatory factors (nitric oxide (NO), IL-6, and TNF-α) and intracellular reactive oxygen species (ROS) in LPS-stimulated RAW264.7 cells in vitro. For further extent, PLE treatment significantly suppressed the expression and phosphorylation of TLR4, Syk, PKC, and NF-κB p65 in vivo and their mRNA in vitro. Subsequently, by co-treating with their inhibitors in vitro , its potential mechanism via TLR4/Syk/PKC/NF-κB p65 signals was disclosed. In summary, the obtained results indicated a noteworthy effective activity of the PLE on COPD inflammation, and partly, the TLR4/Syk/PKC/NF-κB p65 axis might be the potential mechanism. [ABSTRACT FROM AUTHOR]

Introduction: Asthma–chronic obstructive pulmonary (COPD) overlap (ACO) coexists with asthma and COPD syndrome characteristics, with more frequent exacerbations, heavier disease burden, higher medical utilization, and even lower quality of life. However, the ACO standard medications supported by evidence-based medicine have not yet appeared. Methods: By using an ACO mouse model established previously and LPS-stimulated RAW264.7 macrophages in vitro, a potential therapeutic candidate, EAPP-2, was screened from derivatives of 3-arylbenzofuran, and its effect and mechanism on ACO inflammation were evaluated. Results: EAPP-2 significantly alleviated airway inflammation in ACO mice and also inhibited the inflammatory reactions in LPS-induced RAW264.7 macrophages in vitro. Furthermore, EAPP-2 significantly inhibited the expression and phosphorylation of spleen tyrosine kinase (Syk), a common target regulating both eosinophils and neutrophils inflammation. In addition to this, EAPP-2 significantly down-regulates the expression of NF-κB, p-NF-κB, and NLRP3 in vivo and in vitro. Moreover, by using specific inhibitors in vitro, it was validated that EAPP-2 targeted on Syk and then regulated its downstream NF-κB and NLRP3. Conclusion: EAPP-2 is shown to be a potentially useful therapeutic candidate for ACO, and its mechanism is at least partially achieved by targeting on Syk and then inhibiting NF-κB or NLRP3. Moreover, this study suggests that Syk may be a potentially effective target for ACO therapy. [ABSTRACT FROM AUTHOR]

This study explored the global cyberspace security issues, with the purpose of breaking the stereotype of people's cognition of cyberspace problems, which reflects the relationship between interdependence and association. Based on the Apriori algorithm in association rules, a total of 181 strong rules were mined from 40 target websites and 56,096 web pages were associated with global cyberspace security. Moreover, this study analyzed support, confidence, promotion, leverage, and reliability to achieve comprehensive coverage of data. A total of 15,661 sites mentioned cyberspace security-related words from the total sample of 22,493 professional websites, accounting for 69.6%, while only 735 sites mentioned cyberspace security-related words from the total sample of 33,603 non-professional sites, accounting for 2%. Due to restrictions of language, the number of samples of target professional websites and non-target websites is limited. Meanwhile, the number of selections of strong rules is not satisfactory. Nowadays, the cores of global cyberspace security issues include internet sovereignty, cyberspace security, cyber attack, cyber crime, data leakage, and data protection. [ABSTRACT FROM AUTHOR]

A-kinase interacting protein 1 (AKIP1) has previously been demonstrated to be overexpressed in clear cell renal cell carcinoma (ccRCC) tissues and is associated with patient prognosis. The aim of the present study was to explore whether AKIP1 can affect the proliferation, invasion, migration and angiogenesis of ccRCC cells via its interaction with Rac1. Furthermore, the influence of AKIP1 and therefore Rac1 on the expression of the downstream ERK/cellular (c)-Myc signaling pathway was explored. The interaction between AKIP1 and Rac1 was determined using co-immunoprecipitation. The mRNA and protein expression levels of AKIP1 and Rac1 in normal renal epithelial cell lines and ccRCC cell lines were detected using reverse transcription-quantitative PCR (RT-qPCR) and western blotting, respectively. The transfection efficiency of small interfering RNA-AKIP1 and the Rac1 overexpression vector were also confirmed using RT-qPCR and western blotting. The viability, proliferation, invasion and migration of ccRCC cells following transfection were analyzed using the Cell Counting Kit-8, 5-ethynyl-2'-deoxyuridine staining, Transwell and wound healing assays, respectively. The tube formation ability of HUVECs was assessed using the tube formation assay. The protein expression levels of proliferation, invasion, migration and tube-formation-associated proteins as well as proteins associated with the ERK/c-Myc signaling pathway, were detected via western blotting. The results demonstrated that AKIP1 expression levels were increased in ccRCC cell lines. AKIP1 knockdown inhibited the proliferation, invasion and migration of ccRCC cells and HUVEC tube-formation. In addition, AKIP1 was demonstrated to bind to Rac1 in ccRCC cells and AKIP1 downregulation inhibited Rac1 expression. Furthermore, Rac1 overexpression reversed the effects of AKIP1 knockdown on ccRCC cells. AKIP1 knockdown also suppressed the ERK/c-Myc signaling pathway, which was reversed by Rac1 overexpression. In conclusion, AKIP1 knockdown potentially suppressed the proliferation, invasion, migration and angiogenesis of ccRCC cells and inhibited the ERK/c-Myc signaling pathway by binding to Rac1. [ABSTRACT FROM AUTHOR]

Three-dimensional numerical simulations are carried out to investigate the temperature field in the contact zone due to the thermal loading of the workpiece in surface grinding. This technique considers that the thermophysical properties of the workpiece material are non-linear according to temperature, the contact zone between the wheel and the workpiece is assumed as an arc surface, and the heat flux entering the workpiece is assumed as proportional to the local undeformed chip thickness. A good agreement is found between the simulated results and the experimental observations. The high grinding temperature leads to the thermal expansion of the workpiece material, which causes the thickness of the actual material removal layer to be larger than the cutting depth. The grinding temperature at the central portion is higher than that on the side of the workpiece during the wet grinding, thus the material removal layer in the central zone is thicker than that on the side zone, and the workpiece surface is concave across the grinding width. [ABSTRACT FROM AUTHOR]

Bladder cancer (BC) occurs in the urinary system which has high incidence and mortality. During past decades, lots of long noncoding RNAs (lncRNAs) have been identified to function in cancer progression, including BC. In our research, we targeted at investigating the functions and mechanisms of lncRNA pro-transition associated RNA (PTAR) in BC. Functional assays were implemented to access the changes of BC cell phenotype. Mechanistic assays were applied for confirming the interaction between RNAs. Based on the collected data, PTAR expression was high in BC cells and silenced PTAR repressed BC cell proliferative, migratory and invasive abilities but improved cell apoptotic ability. In vivo study also verified PTAR depletion inhibited BC tumor growth. Furthermore, miR-299–3p was confirmed to bind with PTAR and its overexpression suppressed malignant behaviors of BC cells. Cluster of differentiation 164 (CD164) was proved to be miR-299–3p target. Rescue experiments implied overexpressed CD164 offset the inhibitory function of PTAR depletion on BC cell phenotype. Additionally, CD164 was uncovered to combine with C-X-C motif chemokine receptor 4 (CXCR4) to switch on PI3K/AKT pathway. To conclude, PTAR facilitates BC development via regulating miR-299–3p/CD164 axis and activating PI3K/AKT pathway. [ABSTRACT FROM AUTHOR]

• Ten new compounds were isolated from the roots of Stephania tetrandra. • Compounds 1 , 2 , and 12 were unambiguously determined by X-ray crystallography. • Compound 3 was a partial racemate and was discovered by chiral HPLC. • Compounds 1 – 4 and 14 – 16 showed anti-inflammatory activities. Ten new bisbenzylisoquinoline alkaloids (1 – 10) and eight known analogues (11 – 18) were obtained from the roots of Stephania tetrandra. The structures of these compounds were determined by spectroscopic methods, single-crystal X-ray diffraction, electronic circular dichroism analyses, and chemical method. Compounds 1 , 15 , and 16 showed the better anti-inflammatory activities with IC 50 values of 15.26 ± 2.99, 6.12 ± 0.25, and 5.92 ± 1.89 μM, respectively. Compound 18 possessed cytotoxic activities against MCF-7, HCT-116, and HepG2 cell lines with IC 50 values of 2.81 ± 0.06, 3.66 ± 0.26, and 2.85 ± 0.15 μM, respectively. [ABSTRACT FROM AUTHOR]

Background: People living with HIV (PLWH) have a worse prognosis than the general population. Locally advanced or metastatic bladder cancer (BCa) in PLWH has gradually been increasing in recent years. Immune checkpoint inhibitors can improve antitumor activity in the general population, but relevant data in PLWH are unknown. We thus evaluated the efficacy and safety of tislelizumab in PLWH with locally advanced or metastatic BCa., Methods: This retrospective study included 24 patients with locally advanced or metastatic BCa, both HIV positive or negative who underwent tislelizumab treatment (200 mg i.v. every 3 weeks, Q3W) from the multi-centers between December 2019 and March 2022. Demographic details, clinical data, and cancer status were collected. The overall survival (OS), progression-free survival (PFS), overall response rate (ORR), disease control rate (DCR), clinical benefit rate (CBR), and treatment-related adverse events (TRAEs) were recorded and evaluated., Results: A total of 24 individuals were chosen for this study, 10 had HIV and the other 14 did not. The median OS in the HIV-negative group was 62.3 (95% CI, 52.6 to 72.2) was no longer than that of the PLWH group 41.9 (95% CI, 32.9 to 51.0) weeks (HR .7, [95% CI, .17 to 3.30], P = .70). Furthermore, the median PFS in the HIV-negative group was 50.0 (95% CI, 36.2 to 63.9) was also no longer than that of the PLWH group 35.9 (95% CI, 25.5 to 46.3) (HR, 1.34, [95% CI, .38 to 4.69], P = .63). Of 24 patients, treatment-related adverse events, grade 3 or 4 occurred in 2 in the PLWH group and 3 in the HIV-negative group., Conclusion: This retrospective multi-center study suggested that tislelizumab may provide encouraging antitumor activity and could be generally well tolerated. In this retrospective analysis of patients with locally advanced or metastatic BCa, it seems that PLWH may have similar overall and progression-free survival compared to HIV-negative cases.

Chemodynamic therapy (CDT) destroys cancer cells by converting H 2 O 2 or O 2 into reactive oxygen species (ROS), but its therapeutic efficacy is restricted by the antioxidant capacity of tumor. Previous solutions focused on strengthening the nanodrugs with the ability to increase ROS production or weaken the antioxidant capacity of cancer cells. Conversely, we here develop a mild nanodrug with negligible side effects. Specifically, the Au@Pt nanozyme decorated on a bacterial surface (Bac-Au@Pt) is reported to achieve precise CDT. Due to the tumor targeting ability of bacteria and catalytic property of Au@Pt nanozyme under acidic conditions, this nanosystem can release ROS to tumor cells effectively. In addition, the interferon gamma released by T cells specifically decreases the intracellular reductants in tumor cells, while having no obvious effect on normal cells. Therefore, a low dose of Bac-Au@Pt achieves a satisfactory therapeutic efficacy to tumor cells and is nontoxic to normal cells even at their acidic components. This nanosystem enables CDT and immunotherapy to mutually benefit and improve by each other, providing a promising strategy to achieve high anticancer efficacy even with a low dose usage.

Computer-controlled subaperture polishing technology is limited by its propensity to introduce midspatial frequency (MSF) error (ripple error), which significantly inhibits the performance improvement of optical systems. The pseudo-random polishing path is an important method for suppressing MSF error. However, a pseudo-random path that ensures both path smoothness and planning efficiency is difficult to generate. This paper proposes a novel, to the best of our knowledge, pseudo-random path planning method employing a reconstructive points algorithm that efficiently achieves full coverage of the workpiece under massive sampling points at once. Moreover, the generation time for millions of path points is reduced to less than 3 minutes. Additionally, a path modification method is proposed that achieves smooth processing on a machine tool with few additional path points; the vibration magnitude under the proposed smooth path can be reduced to 0.749 g (gravity acceleration), which is the same as that of a raster path. A precise speed management method is also proposed to ensure precise surface error corrections. Overall, the experimental results show that the peak valley of the form error can be converted to 0.115 λ using the proposed algorithm without introducing a periodic MSF error.

Asthma-chronic obstructive pulmonary disease (COPD) overlap (ACO) is a severe clinical syndrome characterized to describe patients with both asthma and COPD clinical characteristics, which has posed a serious threat to patients' quality of life and life safety. However, there are many difficulties and uncertainties in its diagnosis and treatment in clinic; especially, its animal model has not been fully and thoroughly established, and the evaluation of therapeutic drugs is still in its infancy. Here, we used ovalbumin (OVA), lipopolysaccharide (LPS), and smoke costimulation to establish an ACO mouse model and then used RNA-seq technology to detect gene expression in mouse lung tissue. The results showed that ACO mice showed an overlap syndrome of asthma and COPD in lung histological changes and the levels of inflammatory cytokines in bronchoalveolar lavage fluid. The RNA-seq analysis results showed that 6,324 differentially expressed genes (DEGs) were screened between the ACO group and the control group, of which 2,717 (42.7%) were downregulated, and 3,607 (57.3%) were upregulated. Metascape analysis results showed that in the ACO model we established, due to the damage of the respiratory system, the accumulated diseased tissue involves lung, spleen, blood, bone marrow, thymus, etc. It has certain characteristics of pneumonia, pulmonary fibrosis, and chronic obstructive airway disease, lung tumors, rheumatoid arthritis. Gene Ontology and Kyoto Encyclopedia of Genes and Genomes analysis showed that DEGs were enriched in inflammation, immune system activation and imbalance, cell proliferation, and adhesion migration, and the upstream signaling pathways of inflammation were mainly affected by HLA-DRA, SYK, CTLA4, VAV1, NRAS, and JAK3. In short, our research established a mouse model that can better simulate the clinicopathological characteristics of ACO and suggested the foundations in elucidating the molecular mechanisms for pulmonary inflammation and fibrosis in ACO. This work may help further research and contribute substantially to prevention and clinical treatment of ACO in the future., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Ma, Li, Yang, Yuan, Zhang, Li, Fang, Lin and Hou.)

The strategy that combines photodynamic therapy (PDT) and photothermal therapy (PTT) is widely used to achieve strong antitumor efficiency. Since light in the NIR-II window possesses ideal penetration ability, developing NIR-II PTT and NIR-II light triggered photosensitizer release for combined PDT and PTT is very promising in nanomedicine. Methods : We develop a novel nanocarrier (termed AuHNRs-DTPP) by conjugating photosensitizer contained chimeric peptide (DTPP) to Au hollow nanorods (AuHNRs). AuHNRs was obtained by a Te-templated method with the assistance of L-cysteine. The chimeric peptide PpIX-PEG8-GGK(TPP)GRDEVDGC (DTPP) was obtained through a solid-phase peptide synthesis (SPPS) method. Results : Under the 1064 nm laser irradiation, the nanocarrier can accumulate heat quickly for efficient PTT, and then release activated photosensitizer for real-time apoptosis imaging. Thereafter, supplementary PDT can be conducted to kill tumor cells survived from the PTT, and meanwhile the normal tissue can be protected from photo-toxicity. Conclusion : This designed AuHNRs-DTPP nanocarrier with remarkable therapy effect, real-time apoptosis imaging ability and reduced skin damage is of great potential in nanomedicine application., Competing Interests: Competing Interests: The authors have declared that no competing interest exists.

Optical smoothing is a very effective method to restrict mid-to-high spatial frequency errors generated by computer-controlled sub-aperture polishing technologies. According to Preston's equation, pressure distribution is the key factor in describing the smoothing effect of a tool. Although the classic bridging model can solve pressure distribution during the smoothing process, it is only suitable for a tool that consists of a rigid base, compliant interlayer, thin metal plate, and pitch polishing layer. In this paper, a mathematical model applicable for any multi-layer polishing tool is proposed, which helps to calculate the pressure distribution dependent on the thickness of the layer, mid-spatial frequency errors at different periods, and the structures of polishing tools. Based on the model, the pressure distributions and smoothing rates of a rigid tool and a semi-flexible tool are deduced and compared in detail. Validity and improvement in accuracy are verified by comparison with the finite element model. In addition, three groups of experiments using a rigid tool and a semi-flexible tool for smoothing 4 mm and 8 mm period errors generated by magnetorheological finishing are carried out to validate the model. The simulation result of the smoothing rates of the errors after every smoothing process matches well with the experiment results.