Search

Milling quality directly affects production efficiency in rice, which is closely related to the brown rice recovery (BRR), the milled rice recovery (MRR) and the head milled rice recovery (HMRR). The present study investigated these three traits in 173 germplasms in two environments, finding abundant phenotypic variation. Three QTLs for BRR, two for MRR, and three for HMRR were identified in a genome-wide association study, five of these were identified in previously reported QTLs and three were newly identified. By combining the linkage disequilibrium (LD) analyses, the candidate gene LOC_Os05g08350 was identified. It had two haplotypes with significant differences and Hap 2 increased the BRR by 4.40%. The results of the qRT-PCR showed that the expression of LOC_Os05g08350 in small-BRR accessions was significantly higher than that in large-BRR accessions at Stages 4–5 of young panicle development, reaching the maximum value at Stage 5. The increase in thickness of the spikelet hulls of the accession carrying LOC_Os05g08350TT occurred due to an increase in the cell width and the cell numbers in cross-sections of spikelet hulls. These results help to further clarify the molecular genetic mechanism of milling-quality-related traits and provide genetic germplasm materials for high-quality breeding in rice. [ABSTRACT FROM AUTHOR]

In this work, rare-earth elements Eu and Y were added to La2Zr2O7 (LZ) as doping elements, and the ceramic coating of (La0.5Eu0.25Y0.25)2Zr2O7 (LEYZ) was prepared. The evolution of the sintering resistance, thermal shock resistance, and thermal insulation properties of the multi-element rare-earth co-doped modified coatings under long-term and high-temperature conditions was studied. The results showed that the sintering resistance of the doped coating was significantly improved, and the coating still does not fall off after 200 h at 1100 °C. The thermal shock life of the coating at 1000 °C is increased by 47% compared with that of the undoped modified LZ coating. The length of the vertical cracks in LEYZ ceramic layer is obviously shorter than that in LZ coating, which will be more beneficial to preventing the coating from peeling off. Compared with LZ coating, the insulation temperature of the LEYZ ceramic coating is increased by 24, 26 and 34% in the range of 900 ~ 1100 °C, respectively. The coating has the best thermal insulation effect, which is consistent with theoretical calculation results. The results demonstrate that the modified lanthanum zirconate coatings doped with Europium and Yttrium has great potential in high-temperature performance. [ABSTRACT FROM AUTHOR]

The mining of favorable SNP loci and haplotypes is of great significance for the further cloning and molecular-assisted breeding of alkalinity-tolerance genes in rice. To improve the utilization rate of saline–alkaline lands and the yield of rice, we used the 1,322,884 SNPs obtained from the sequencing 173 of rice accessions in this study. Alkalinity-tolerance-related traits, including the germination energy (GE), germination rate (GR), seedling length (SL), root length (RL), relative alkaline damage rate (RADR) of the GERADR of the GR, RADR of the SL and RADR of the RL, were evaluated in 2019 and 2020 and revealed abundant phenotypes in the studied population. A genome-wide association analysis detected 10 quantitative trait loci (QTLs) related to alkalinity tolerance. In addition, a transcriptome sequencing analysis of the alkalinity-tolerant rice variety 'Yuedao 9' and the alkali-sensitive rice variety 'Tijin' under alkalinity stress and control conditions was performed. Three candidate genes that were predicted to be related to alkalinity tolerance in rice, namely LOC_Os06g06600, LOC_Os011g44680 and LOC_Os011g44600, were screened based on gene annotation, coding sequences and haplotype analysis. The results of this study provide important genetic information for the molecular improvement of rice. [ABSTRACT FROM AUTHOR]

There is a growing interest in enhancing the bioactivity of TC4-based metallic biomaterials, which are known for their excellent biocompatibility. Bioactive glass (BG) has been recognized for its high potential in promoting bioactivity, particularly in osteo tissue engineering. This study focuses on investigating the influence of BG addition on the microstructure and electrochemical properties of TC4 coatings. The TC4/BG composite coatings were fabricated through laser cladding, and their microstructure was characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The electrochemical properties of the coatings were assessed through electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests in three different solutions. The results revealed that the incorporation of BG had a significant impact on the microstructure of the TC4 coatings, leading to the formation of a well-defined interface between the TC4 matrix and the BG aggregates. The distribution of BG aggregates within the TC4 matrix coating was found to be random and unrelated to the specific regions of the coating. The metallographic microstructure variations were attributed to different heat dissipation conditions during the laser cladding process. Furthermore, the electrochemical corrosion behavior of TC4/BG composite coatings reveals that they exhibit stability similar to that of passive films and good resistance against media corrosion compared to TC4, while also showing enhanced corrosion resistance in 3.5 wt% NaCl and Dulbecco's modified Eagle medium (DMEM) solutions, indicating their potential for biomedical applications; however, the corrosion resistance decreases gradually in all solutions, potentially due to the elevated Cl− concentration. Further research can explore bioactivity enhancement of TC4/BG composite coatings and investigate the long-term stability and biological response of these coatings in diverse physiological environments. [ABSTRACT FROM AUTHOR]

Mining salt tolerance genes is significant for breeding high-quality salt-tolerant rice varieties in order to improve the utilization of saline–alkaline land. In this study, 173 rice accessions were measured for their germination potential (GP), germination rate (GR), seedling length (SL), root length (RL), germination potential relative to salt damage rate (GPR), germination rate relative to salt damage rate (GRR), seedling length relative to salt damage rate (SLR), relative salt damage rate at the germination stage (RSD) and comprehensive relative salt damage rate in the early seedling stage (CRS) under normal and salt stress conditions. Genome-wide association analysis was performed with 1,322,884 high-quality SNPs obtained by resequencing. Eight quantitative trait loci (QTLs) related to salt tolerance traits at the germination stage were detected in 2020 and 2021. They were related to the GPR (qGPR2) and SLR (qSLR9), which were newly discovered in this study. Three genes were predicted as salt tolerance candidate genes: LOC_Os02g40664, LOC_Os02g40810, and LOC_Os09g28310. At present, marker-assisted selection (MAS) and gene-edited breeding are becoming more widespread. Our discovery of candidate genes provides a reference for research in this field. The elite alleles identified in this study may provide a molecular basis for cultivating salt-tolerant rice varieties. [ABSTRACT FROM AUTHOR]

Rice (Oryza sativa L.) appearance quality, which is mainly defined by grain shape and chalkiness, is an important target in rice breeding. In this study, we first re-sequenced 137 indica accessions and then conducted a genome-wide association study (GWAS) for six agronomic traits with the 2,998,034 derived single nucleotide polymorphisms (SNPs) by using the best linear unbiased prediction (BLUP) values for each trait. The results revealed that 195 SNPs had significant associations with the six agronomic traits. Based on the genome-wide linkage disequilibrium (LD) blocks, candidate genes for the target traits were detected within 100 kb upstream and downstream of the relevant SNP loci. Results indicate that six quantitative trait loci (QTLs) significantly associated with six traits (qTGW4.1, qTGW4.2, qGL4.1, qGL12.1, qGL12.2, qGW2.1, qGW4.1, qGW6.1, qGW8.1, qGW8.2, qGW9.1, qGW11.1, qGLWR2.1, qGLWR2.2, qGLWR4.2, qPGWC5.1 and qDEC6.1) were identified for haplotype analysis. Among these QTLs, two (qTGW4.2 and qGW6.1), were overlapped with FLO19 and OsbZIP47, respectively, and the remaining four were novel QTLs. These candidate genes were further validated by haplotype block construction. [ABSTRACT FROM AUTHOR]