Search

Your search keyword '"Ma, Lun"' showing total 265 results
Start Over Author "Ma, Lun" Language english
265 results on '"Ma, Lun"'

19. Aerodynamic analysis of large wind farms using two-scale coupled modelling approaches

Author

Ma, Lun, Tsoutsanis, Panagiotis, and Antoniadis, Antonis

Subjects
ABL, actuator disc, CFD, DES, full-resolved turbine, LES, numerical weather prediction model, support structure, theoretical model, URANS, wind energy, wind farm, wind turbine
Abstract

The effects of turbine aerodynamics and response characteristics of the atmospheric boundary layer on the overall wind farm efficiency are investigated in this research. Various wind farm modelling strategies, which include a theoretical and several CFD models, are presented. This study consists of three main parts: (i) improve and validate an existing theoretical wind farm model, (ii) infinitely large wind farm modelling with actuator-disc and fully-resolved turbine models, and (iii) finite-size wind farm modelling with a numerical weather prediction model. In the first part, an extended theoretical model based on a two-scale coupled momentum balance method is proposed to estimate aerodynamic effects of wind turbine towers on the performance of large wind farms. The modified theoretical model predicts that the optimal turbine spacing should increase with the value of normalised support-structure drag, as well as additional parameters describing the response characteristics of the atmospheric boundary layer to the total farm drag. The Detached-Eddy simulations of a periodic array of fully staggered actuator discs (AD) show a reasonably good agreement (within 10% in the prediction of power) with the modified theoretical model. In the second part, a fully resolved (FR) NREL 5MW turbine model is employed in two URANS simulations (with and without the turbine tower) of a fully developed wind farm boundary layer. The FR-URANS results show stronger tower effects than both AD-RANS and theoretical model predictions, which is a strong indication of the necessity of considering turbine support structure within large wind farm models. The possibility of performing DDES is also investigated with the same FR turbine model and periodic domain setup. The results show complex turbulent flow characteristics within a large wind farm, where typical hairpin and hub vortices have been clearly captured. In addition, the computational cost of DDES has been found to be similar to URANS (for a given number of rotations), which is a positive sign for conducting DDES in future studies. In the third part, a numerical weather prediction model is used as a realistic farm-scale flow model to investigate how the streamwise pressure gradient, Coriolis force and acceleration/deceleration terms in the farm-scale momentum balance equation tend to change in time. The results suggest that the streamwise pressure gradient may be enhanced substantially by the resistance caused by the wind farm, whereas its influence on the other two terms appears to be relatively minor. These results suggest the importance of modelling the farm-induced pressure gradient accurately for various weather conditions in future studies of large wind farms.

Published
2021

37. A novel swirl burner with coal co-firing ammonia: Effect of extension length of the dual-channel ammonia pipe on combustion and NOx formation.

Author

Ma, Lun, Li, Kaiyuan, Fang, Qingyan, Chen, Gang, and Zhang, Cheng

Subjects
*COAL ash, *CARBON emissions, *CO-combustion, *AMMONIA, *FLY ash, *COMBUSTION
Abstract

The coal/ammonia co-firing technology for thermal power generation is a feasible method to effectively reduce CO 2 emissions. However, the easy formation of NO x is one of the challenges faced by this technology owing to the high nitrogen content in ammonia. This study proposes a novel swirl burner with a scalable dual-channel ammonia pipe, and evaluates the combustion and NO x formation under different extension lengths of the dual-channel ammonia pipe (i.e., 0 m, 0.4 m, 0.8 m, 1.0 m, 1.2 m). The results show that the extension length of the dual-channel ammonia pipe significantly affects the flow, combustion, and NO x formation. When the extension length of the dual-channel ammonia pipe is above 0.8 m, the ammonia stream can completely penetrate the internal recirculation zone into the high CO environment, which contributes to promoting the ammonia pyrolysis and inhibiting the ammonia oxidation to form NO x. NO x emissions significantly decrease from 846 ppm to 146 ppm as the extension length of the dual-channel ammonia pipe from 0 m to 0.8 m, but change slightly as further increases from 0.8 m to 1.2 m. The carbon content in fly ash decreases from 4.53% to 3.40% as the extension length of the dual-channel ammonia pipe increases from 0 m to 1.0 m. Still, it increases from 3.40% to 3.70% as the extension length of the dual-channel ammonia pipe rises to 1.2 m. Overall, it is reasonable to set the extension length of the dual-channel ammonia pipe at 1.0 m in this studied condition, which can obtain low NO x and low carbon content in fly ash. [Display omitted] • A novel swirl burner with a scalable dual-channel NH 3 pipe is proposed. • Effect of NH 3 pipe extension length on combustion and NO x formation is investigated. • NH 3 pipe extension length significantly affects flow, combustion, and NO x formation. • 1.0 m for NH 3 pipe extension length is reasonable with good performance. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

47. Hydrodynamic force and torque models for cylindrical particles in a wide range of aspect ratios.

Author

Wang, Jingliang, Chen, Xinke, Ma, Lun, Jiang, Maoqiang, Fang, Qingyan, Tan, Peng, Zhang, Cheng, Chen, Gang, and Yin, Chungen

Subjects
TORQUE, BIOMASS energy, FLOW simulations, REYNOLDS number
Abstract

During the pneumatic conveyance of biomass in a coal-fired power station boiler, biomass particles have cylindrical shapes with different aspect ratios. They move through the fluid at any angle and rotate strongly. However, highly accurate and general models of the drag, lift, and torque coefficients (CD, CL, and CT) for biomass particles in a wide range of aspect ratios, especially the CT model and the high aspect ratios, are currently lacking. This paper presents detailed direct numerical simulations of the flow around cylindrical cylinders with varying aspect ratios (6 ≤ AR ≤ 22), Reynolds numbers (100 ≤ Re ≤ 2000), and angles of incidence (0° ≤ θ ≤ 90°). The simulation was conducted using the OpenFOAM solver with the body-fitted mesh method. The flow characteristics and force coefficients of cylindrical particles with different AR were systematically analyzed. New functional correlations between CD, CL, and CT and AR, Re, and θ values were established. The mean squared errors for CD, CL, and CT were 8.8 × 10–2, 2.4 × 10–2, and 4.7 × 10–2, with average relative errors of 5.8%, 3.5%, and 8.17%, respectively. A comparison of the results with other experimental and simulation data in previous literatures showed that the new CD and CL models have considerable higher predictive ability. The generality of the new CD model expanding to low ARs of 1.5 and 3 is verified finally. The new force and torque models are expected to improve the accuracy of Eulerian–Lagrangian simulations of various cylindrical particle-laden flows in the utility of biomass energy. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results