Search

The goal of this research was the development of cellulose-based biodegradable drug delivery systems solutions for cosmetic mask applications. Cellulose-based materials derived from natural renewable sources provide a sustainable alternative to nonwoven cosmetic masks derived from nondegradable fossil-based raw materials. An experimental design was executed to assemble the 3D cellulose fibres matrix and the water in oil emulsion comprising the active molecules from Mentha piperita L. Two types of biopolymeric additives were used, one derived from a nano/micro fibrillated cellulose pulp and another one including chitosan. A 3D computational simulation study was performed to enhance porosity and strength properties. The results indicated that the cosmetic face mask optimized prototypes, made from a biodegradable 3D matrix of cellulose fibres and active molecules, are suitable for dermic use. Keywords: biopolymers, dermic application, drug delivery systems (DDS), essential oil, Mentha piperita

The influence of the alkaline delignification of hemp on its moisture uptake has been studied under the project “Preparation and functionalization of hemp for textile substrates” focussed on the reduction of cotton imports for the manufacturing of clothing, household textiles and medical devices. The project looks for the partial replacement of cotton by hemp on the production of natural cellulosic textiles. Hemp fibres are alkaline delignified at different times to evaluate its effect on their moisture uptake behaviour to evaluate the ability of replacing cotton in the next-to-skin goods manufacturing. The paper gives three easy tools to analyse the moisture uptake behaviour by determining the sorption ratio, the hysteresis and the parameters of the isotherms fitted using three different models (GAB, Hailwood-Horrobin and Dent) to the absorption desorption isotherms. The samples of the original and delignified hemp have been subjected to moisture absorption/desorption trials from 5% to 95% RH at 25 °C. Sorption ratio and hysteresis reveal the greater influence of lignin on moisture uptake at low relative humidities, while at high, was cellulose which plays the most important role. The models fitted to the isotherms show that delignification decreases the size of the monolayer that, in desorption results always greater than in absorption. The energy constants of the monolayer for delignified fibres in absorption were higher than those for the original fibres, while the opposite occurred in desorption. Lignin caused great differences between absorption and desorption. The energy constants of the multilayer show a greater range of variation in delignified samples than in the original one, and results in absorption were higher than those in desorption. Delignification time of 3 h reached the highest cellulose content which best approached to the cellulose content of cotton causing that the moisture uptake behaviour drew near to it, especially at higher relative humidity., This work was supported by Ministerio de Ciencia e Innovación (ES) through the Project MAT2016-79352-R.

Polyester fibers (PES) are the most consumed textile fibers due to their low water absorption, non-ionic character and high crystallinity. However, due to their chemical structure, the chemical interactions between polyester, finishing products, and dyes are quite challenging. We report on the use of ozone to modify the surface of polyester fibers with the goal of improving the interaction of the modified surface with finishing compounds and dyes. We used C.I. Disperse Yellow 211 to dye ozone-treated polyester fabrics and evaluated the effects of ozone treatment using FTIR-ATR, Raman spectroscopy, SEM imaging, rubbing tests, and capillarity measurements. We evaluated the dyeing performance via color analysis, and determined the dyeing kinetics. Experimental results indicate that the modification of polyester fabrics with ozone is a feasible pre-treatment that improves dyeing efficiency allowing better solidity of color and a decrease in the amount of dye required.

Nowadays, the needs and requirements to avoid infections during surgical operations, require to be more imaginative than ever. The one-use textiles substrates that are used in hospitals can be, also, a way to transport the antibacterial effect around the own building. This is the main objective of this work; to use clothes and textiles surfaces as antibacterial systems using natural components. Microencapsulation has shown in several occasions the effectivity to protect and vehiculize active principles that can be used for medical treatments. In this case, essential oils have been used as antimicrobial agent, that when combined with shell polymers based on Chitosan of different molecular weight distribution and Arabic gum, allows them to act against Gram (+) and Gram (-) bacteria. Chitosan has been shown to be a biopolymer with a wide range of applications and is highly dependent on its molecular weight. The study of the efficiency of the final systems obtained present high valuable possibilities, due to its character similar to hydrogels. The influence of the molecular weight of biopolymers used, in a layer by layer approach (LbL), has been demonstrated and shows a very promising way to state a clear control on the delivery mechanisms. The essential oil used has a very volatile character formed by more than 40 components and with the help of FT-IR and TGA it has been possible to corroborate that all its components were encapsulated. The impregnation of the different samples to the tissue was successful and allowed the antibacterial study to be carried out, which was carried out in duplicate on each sample and demonstrated that they have bacterial activity.

Biopolymeric chitosan is considered a promising encapsulating agent for tex-tile applications due to its biocompatibility, lack of toxicity, antibacterial activ-ity, high availability, and low cost. After cellulose, it is nature's most importantorganic compound. Also, chitosan has unique chemical properties due to itscationic charge in solution. Microencapsulation technologies play an impor-tant role in protecting the trapped material and in the durability of the effect,controlling the release rate. The app lication of chitosan microcapsules in tex-tiles follows the current interest of industries in functionalization technologiesthat give different properties to products, such as aroma finish, insect repel-lency, antimicrobial activity, and thermal comfort. In this sense, methods ofcoacervation, ionic gelation, and LBL are presented for the production ofchitosan-based microcapsules and methods of textile finishing that incorporatethem are presented, bath exhaustion, filling, dry drying cure, spraying, immer-sion, and grafting chemical. Finally, current trends in the textile market areidentified and guidance on future developments

For the actual courses of surroundings conservation, segregation of oily water mixtures is increasingly desired. The hydrophobic/oleophilic cotton fabric as a system for removing oil from a water phase was prepared by reversible addition fragmentation chain transfer (RAFT) reaction technology. A piece of fabric was modified with the RAFT chain transfer agent S-1-Dodecyl-S'-(a',a''-dimethyl-a''-acetic acid) trithiocarbonate (CTA), then hydrophobic/oleophilic interface was fabricated on the CTA modified fabric by grafting the octadecyl methacrylate. The chemical structures, surface topographies and surface properties were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and contact angle experiments, respectively. The ability of as-prepared fabric with a separation efficiency was better than 97.0 % on average for various types of oil/water mixtures demonstrated the hydrophobic/oleophilic property. We believe that the work will extend the applications of fabric in the oil/water separation and provide a new design in practical applications

Preparation of hydrophobic cotton fabric based on the self-assembly method was proposed. The cotton fabric was modified with 3-(methacryloyloxy)propyltrimethoxysilane and grafted with trifluoroethyl methacrylate and dodecafluoroheptyl methacrylate through free radical polymerization reaction. The objective of this research work was to investigate the effect of fluorine monomer with different chemical structure deposited on cotton fabric on the hydrophobic property. The chemical structure, surface topography, and surface wettability of the fabrics were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle experiments, respectively. The results showed that the as-prepared fabrics exhibited water contact angle of above 140°. It was noticed that the fluorocarbon chain length of a modifier and its chemical structure could strongly affect the hydrophobic property of the modified fabrics, and the increase in fluorine atoms caused an increase in the water contact angle values.

In some specific fields of application (e.g., cosmetics, pharmacy), textile substrates need to incorporate sensible molecules (active principles) that can be affected if they are sprayed freely on the surface of fabrics. The effect is not controlled and sometimes this application is consequently neglected. Microencapsulation and functionalization using biocompatible vehicles and polymers has recently been demonstrated as an interesting way to avoid these problems. The use of defined structures (polymers) that protect the active principle allows controlled drug delivery and regulation of the dosing in every specific case. Many authors have studied the use of three different methodologies to incorporate active principles into textile substrates, and assessed their quantitative behavior. Citronella oil, as a natural insect repellent, has been vehicularized with two different protective substances; cyclodextrine (CD), which forms complexes with it, and microcapsules of gelatin-arabic gum. The retention capability of the complexes and microcapsules has been assessed using an in vitro experiment. Structural characteristics have been evaluated using thermogravimetric methods and microscopy. The results show very interesting long-term capability of dosing and promising applications for home use and on clothes in environmental conditions with the need to fight against insects. Ethyl hexyl methoxycinnamate (EHMC) and gallic acid (GA) have both been vehicularized using two liposomic-based structures: Internal wool lipids (IWL) and phosphatidylcholine (PC). They were applied on polyamide and cotton substrates and the delivery assessed. The amount of active principle in the different layers of skin was determined in vitro using a Franz-cell diffusion chamber. The results show many new possibilities for application in skin therapeutics. Biofunctional devices with controlled functionality can be built using textile substrates and vehicles. As has been demonstrated, their behavior can be assessed using in vitro methods that make extrapolation to their final applications possible., M.J.L.A. gratefully acknowledges the financial support from The Forest Next.

The primary advantages of electrospun membranes include the ability to obtain very thin fibers that are on the order of magnitude of several nanometers with a considerable superficial area and the possibility for these membranes to be manipulated and processed for many different applications. The purpose of this study is to evaluate and quantify the transport mechanisms that control the release of drugs from polymer-based sandwich membranes produced using the electrospinning processes. These electrospun membranes were composed of poly(lactic acid) (PLA) because it is one of the most promising biodegradable polymers due to its mechanical properties, thermoplastic processability and biological properties, such as its biocompatibility and biodegradability. The transport mechanism that controls the drug delivery was evaluated via the release kinetics of a bioactive agent in physiological serum, which was used as a corporal fluid simulation. To describe the delivery process, mathematical models, such as the Power Law, the classical Higuchi equation and an approach to Fick's Second Law were used. Using the applied mathematical models, it is possible to conclude that control over the release of the drug is significantly dependent on the thickness of the membrane rather than the concentration of the drug.