Search

The research work explores the impact of temperature on Silicon photovoltaic (PV) panels, considering Nigeria as a case study. It is found that high solar radiation in Nigeria increases the surface temperature of PV panels above 25 °C of the optimal operating temperature. The redundant energy gain from solar irradiance creates heat at the rear of solar panels and reduces their efficiency. Cooling mechanisms are therefore needed to increase efficiency. In this study, we demonstrated a unique hybrid system design employing a heat exchanger at the back of the panel, with water circulated through the back of the PV panel to cool the system. The system was simulated using TRNSYS at three locations in Nigeria—Maiduguri, Makurdi, and Port Harcourt. The results of the peak annual electrical power output in Maiduguri give a power yield of 1907 kWh/kWp, which is the highest, due to a high solar radiation average of 727 W/m2 across the year. For Makurdi, the peak annual electrical power output is 1542 kWh/kWp, while for Port Harcourt the peak power output is 1355 kWh/kWp. It was observed that the surface temperature of Polycrystalline Si-PV was decreased from 49.25 °C to 38.38 °C. The electrical power was increased from 1526.83 W to 1566.82 W in a day, and efficiency increased from 13.99% to 15.01%. [ABSTRACT FROM AUTHOR]

The agricultural sector faces multiple challenges linked to increased climate uncertainty, causing severe shocks including increased frequency of extreme weather events, new pest and disease risks, soil degradation, and pre and postharvest food losses. This situation is further exacerbated by geopolitical instability and volatility in energy prices impacting on fertiliser supplies and production costs. Net zero strategies are vital to achieve both food security and address negative environmental impacts. This perspective paper reviews and assesses the most viable options (actions) to achieve net zero with a focus on the arable/livestock and protected cropping sectors in the UK. The methodology was based on a synthesis of relevant literature, coupled with expert opinions using the holistic PESTLE (Political, Environmental, Social, Technological, Legal and Environmental) approach to categorise actions, leading to formulation of a roadmap to achieve net zero. The PESTLE analysis indicated that there are technically and economically viable actions available which need to be prioritised depending on the ease of their implementation within the two crop sectors investigated. These actions include (i) policy changes that are better aligned to net zero; (ii) circular economy approaches; (iii) connectivity and accessibility of information; (iv) increased resilience to shocks; (v) changing diets, nutrition and lifestyles; (vi) target setting and attainment; and (vii) farm economics and livelihoods. The outputs can be used by stakeholders and decision makers to inform policy and drive meaningful changes in global food and environmental security. [ABSTRACT FROM AUTHOR]

Natural gas flaring, with its harmful environmental, health, and economic effects, is common in the Nigerian oil and gas industry because of a lower tax regime for flared gases. Based on the adverse effects of flared gas, the Nigerian government has renewed and improved its efforts to reduce or eliminate gas flaring through the application of natural gas utilisation techniques. However, because the conventional approach to flare gas utilisation is heavily reliant on achieving scale, fuel, and end-product prices, not all technologies are technically and economically viable for typically capturing large and small quantities of associated gas from various flare sites or gas fields (located offshore or onshore). For these reasons, this paper reviews and compares various flare gas utilisation options to guide their proper selection for appropriate implementation in the eradication of routine gas flaring in Nigeria and to promote the Zero Routine Flaring initiative, which aims to reduce flaring levels dramatically by 2030. A qualitative assessment is used in this study to contrast the various flare gas utilisation options against key decision drivers. In this analysis, three natural gas utilisation processes—liquefied natural gas (LNG), gas to wire (GTW), and gas to methanol (GTM)—are recommended as options for Nigeria because of their economic significance, technological viability (both onshore and offshore), and environmental benefits. All these gas utilisation options have the potential to significantly reduce and prevent routine gas flaring in Nigeria and can be used separately or in combination to create synergies that could lower project costs and product market risk. This article clearly identifies the environmental benefits and the technical and economic viability of infrastructure investments to recover and repurpose flare gasses along with recommendation steps to select and optimise economies of scale for an associated natural gas utilisation option. [ABSTRACT FROM AUTHOR]

The resultant residues after thermal processes can be reused in the form of activated carbon (AC) production or used for soil amelioration. However, the economic and energy optimisation of the waste revaluation process is necessary for the prediction of technology requirements, investment boundaries and cost–benefit analysis. Mass, energy and cost estimation of the entire process were systematically executed relative to equipment sizing and type of product, as major factors in the evaluation. The economic analysis and process optimisation were quantified and evaluated with the Aspen Plus economy and an SPSS statistical tool for economic analysis. Simulation results were concomitant with economic analysis to determine the approximate annualised return on investment, profitability index and payback period, using optimised variables in the process. The four processes examined: process scenario 1–4 (pyrolysis, gasification, combustion and combined) have 16, 17, 14 and 17.2% return on investment for the 8.5, 8.2, 9.8 and 8-year payback period, respectively. The results provide a technology assessment and economic guide for investors and policymakers among others. This work is also useful for researchers in achieving the goal of efficient biomass utilisation. Palm waste ash as a potential alternative to chemical fertiliser, especially for the treatment of ultisol and acidic soils, were evaluated and it was confirmed that it is a good alternative to typical inorganic fertiliser. Finally, the results indicate that using such wastes in the AC market is a viable business option, though with high initial capital investment even though palm waste ash can be produced locally. [ABSTRACT FROM AUTHOR]

The use of hydrocarbon fuels increases with population growth and rising standards of living, and so does natural gas flaring. Natural gas flaring is both a waste of natural resources and a violation of Nigeria's energy policy for sustainable development through natural gas conservation. However, it remains the most cost-efficient and effective associated natural gas (ANG) management option in developing countries such as Nigeria. The World Bank's initiative to eliminate routine gas flaring by 2030 has increased the need to limit or eliminate routine gas flaring. Often, studies on natural gas utilisation techniques fail to consider the lack of practical tools that integrate economic, technical, and regulatory factors into a gas flaring management framework, and the intricacies of existing tools, which often come at the expense of simplicity to achieve real-time information output. This paper aims to establish a framework and ANG management tool to reduce regular gas flaring in Nigeria. This research established a management framework (using a flowchart decision tree) and models to provide a user-friendly ANG flaring tool (using a MATLAB graphical front end user interface with back-end ASPEN HYSYS thermodynamic models). This was combined with techno-economic models for liquefied natural gas, gas-to-methanol, and gas-to-wire ANG utilisation options. The tool was then tested with data obtained from Fields Y and X in the Niger Delta region of Nigeria. The results, considering both economic and technical factors, showed that the choice of liquefied natural gas for Field Y was best due to its proximity to the pipeline infrastructure and its cost-effectiveness, and the availability of a high-demand LNG market for that area. For Field X, gas-to-wire was best due to its proximity to the electrical grid and high electricity requirements for that area. Additional geographical profiles in West Africa and ANG utilisation alternatives were recommended for further investigation. This paper developed and validated a one-of-a-kind ANG flaring management tool that incorporates techno-economic analysis of selected ANG utilisation options to assist operators and investors in making more profitable investment decisions. [ABSTRACT FROM AUTHOR]

Thermal spray coatings have the advantage of providing thick and functional coatings from a range of engineering materials. The associated coating processes provide good control of coating thickness, morphology, microstructure, pore size and porosity, and residual strain in the coatings through selection of suitable process parameters for any coating material of interest. This review consolidates scarce literature on thermally sprayed components which are critical and vital constituents (e. g., catalysts (anode/cathode), solid electrolyte, and transport layer, including corrosion‐prone parts such as bipolar plates) of the water splitting electrolysis process for hydrogen production. The research shows that there is a gap in thermally sprayed feedstock material selection strategy as well as in addressing modelling needs that can be crucial to advancing applications exploiting their catalytic and corrosion‐resistant properties to split water for hydrogen production. Due to readily scalable production enabled by thermal spray techniques, this manufacturing route bears potential to dominate the sustainable electrolyser technologies in the future. While the well‐established thermal spray coating variants may have certain limitations in the manner they are currently practiced, deployment of both conventional and novel thermal spray approaches (suspension, solution, hybrid) is clearly promising for targeted development of electrolysers. [ABSTRACT FROM AUTHOR]

This study analyses the concept of a novel multi-crystallization system to achieve zero liquid discharge (ZLD) for desalination plants using an innovative heat recovery system consisting of a heat transfer fluid and a compressor to reduce energy consumption. The main focus is to recover water and separately extract salts from seawater brines with high purity, including calcite, anhydrite, sodium chloride, and epsomite, which can be sold to the cement industry. The system is compared with a conventional brine treatment system. The energy demand and economic feasibility of both systems are assessed to evaluate profitability at a scale of 1000 kg/h. The results estimate that the utilization of a heat recovery fluid reduces energy consumption from 690 kWhth/ton of feed brine to 125.90 kWhth/ton equaling a total electric consumption of 60.72 kWhe/ton. The system can recover 99.2% of water and reduce brine discharge mass by 98.9%. The system can recover 53.8% of calcite at near 100% purity, 96.4% of anhydrite at 97.7% purity, 91.6% of NaCl at near 100% purity, and 71.1% of epsomite at 40.7% purity. Resource recovery accounts for additional revenues, with halite and water accounting respectively for 69.85% and 29.52% of the income. The contribution of calcite and anhydrite to revenue is very low due to their low production. The levelized cost of water (LCOW) of the multi-crystallization system is 13.79 USD/m3 as opposed to 7.85 USD/m3 for the conventional ZLD system. The economic analyses estimate that the conventional ZLD system can achieve payback after 7.69 years. The high electricity cost, which accounts for 68.7% of the annual expenses, can be produced from renewable sources. [ABSTRACT FROM AUTHOR]

Ammonia/water absorption chillers are driven by low-grade heat and cover wide refrigeration temperatures. This paper analyses single-stage ammonia/water absorption chillers. A numerical model was developed based on the heat exchanger performance. The model captures variational heat exchanger performances and describes the actual cycle with varying boundary conditions. The detrimental effects of refrigerant impurity were analysed quantitatively under different operating conditions. The model was validated with experimental data. A basic cycle and three advanced cycles were analysed for sub-zero refrigeration by comparing the thermodynamic performances. A compression-assisted cycle extended the activation temperature from 80 to 60 °C. At the heat source of 120 °C, when a counter-current desorber or bypassed rich solution was used, the COP increased from 0.51 to 0.58 or 0.57, respectively. The operating parameters included the heat source temperatures, heat sink temperatures, the mass flow rates and mass concentrations of rich solutions. Higher heat source temperatures increase cooling capacity. The increase was around 20 kW for the basic cycle of sub-zero refrigeration. There is an optimum heat source temperature maximising the COP. Higher heat source temperatures increased the refrigerant mass flow rate and reduced the mass concentration. The mass concentration can decrease from 0.999 to 0.960. [ABSTRACT FROM AUTHOR]