Search

In this work, bismuth sulfide (Bi2S3) thin films were deposited by a chemical bath deposition (CBD) technique (called soft chemistry), while titanium dioxide (TiO2) nanoparticles were synthesized by sol–gel and zinc oxide (ZnO) nanoparticles were extracted from alkaline batteries. The resulting nanoparticles were then deposited on the Bi2S3 thin films by spin coating at 1000 rpm for 60 s each layer to create heterojunctions of Bi2S3/ZnO and Bi2S3/TiO2. These materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The optical and contact angle analyses were undertaken by UV–Vis spectroscopy and a contact microscopy angle meter, respectively. The calculated band gap values were found to be between 1.9 eV and 2.45 eV. The Bi2S3 presented an orthorhombic structure, the TiO2 nanoparticles presented an anatase structure, and the ZnO nanoparticles presented a wurtzite hexagonal crystal structure. Furthermore, heterogeneous solar photocatalysis was performed using the Bi2S3, Bi2S3/ZnO, and Bi2S3/TiO2 thin film combinations, which resulted in the degradation of Congo red increasing from 8.89% to 30.80% after a 30 min exposure to sunlight. [ABSTRACT FROM AUTHOR]

Nowadays, different industries, such as the aerospace and biomedical industries, prefer using Ti alloys due to their excellent anti-corrosion properties and ability to generate a TiO2 oxide layer; this induces the use of anodization to increase the useful life of components. The aim of this work is to characterize the electrochemical effect of anodizing treatment on titanium alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V, and Ti Beta-C) in NaOH and KOH at 1 M, applying a current density of 0.0025 A/cm2. The electrochemical techniques employed were electrochemical noise (EN) and electrochemical impedance spectroscopy (EIS), supported by ASTM G199 and ASTM G106 in electrolytes of NaCl and H2SO4 at 3.5 wt. % as a simulation of marine and industrial atmospheres. Also, the anodized transversal section and surface morphology were characterized by a scanning electron microscope (SEM). The results of both electrochemical techniques indicated that Ti-6Al-2Sn-4Zr-2Mo anodized in NaOH presented the best properties against corrosion, and the thickness of the oxide was the biggest. [ABSTRACT FROM AUTHOR]

The dressings are materials that can improve the wound-healing process in patients with medical issues. Polymeric films are frequently used as dressings with multiple biological properties. Chitosan and gelatin are the most used polymers in tissue regeneration processes. There are usually several configurations of films for dressings, among which the composite (mixture of two or more materials) and layered ones stand out (layers). This study analyzed the antibacterial, degradable, and biocompatible properties of chitosan and gelatin films in 2 configurations, composite and bilayer, composite. In addition, a silver coating was added to enhance the antibacterial properties of both configurations. After the study, it was found that the bilayer films have a higher antibacterial activity than the composite films, having inhibition halos between 23% and 78% in Gram-negative bacteria. In addition, the bilayer films increased the fibroblast cell proliferation process, reaching up to 192% cell viability after 48 h of incubation. On the other hand, composite films have greater stability since they are thicker, with 276 µm, 243.8 µm, and 239 µm compared to 236 µm, 233 µm, and 219 µm thick for bilayer films; and a low degradation rate compared to bilayer films. [ABSTRACT FROM AUTHOR]

Wound dressing composite films of O-carboxymethyl chitosan (OCMC) and gelatin were prepared and mixed with hydroxyapatite (HA) composited with Silver (Ag) and Copper (Cu) at different concentrations. The chemical, thermal, morphological, and biological properties of the composite films were studied. The analysis by FTIR confirmed the presence of interactions between gelatin and OCMC, and at the same time, the polymer matrix interactions with Ag-Cu/HA complex. The inclusion of nanoparticle to the composite was associated with an improvement of the thermal stability, morphological roughness, a 9–12% more hydrophobic behavior (composite C1, C5, and C8), increase in antibacterial activity from 23.2 to 33.1% for gram negative bacteria and from 37.28 to 40.59% for gram positive bacteria, and with a cell viability greater than 100% for 24 and 72 h. The films obtained can serve as a wound healing dressing and regenerating biomaterial. [ABSTRACT FROM AUTHOR]

Low density polyethylene (LDPE) and polystyrene (PS) samples were functionalized with oregano's essential oil (OEO) for possible antimicrobial packing applications. Different concentrations of OEO were used (0.5-1.5% v/v). Polymers were UV light irradiated during 60 min to improve the OEO adhesion through the polar groups (COOH, OH or COO-) generation on their surface. The effect of OEO different concentration on their antimicrobial activity, mechanical properties and cytotoxicity of the functionalized polymers were analyzed. All functionalized samples showed antimicrobial activity against Gram positive and Gram negative bacteria and this activity increased with OEO concentration. The addition of OEO did not affect the LDPE mechanical properties. The flexural properties of PS were affected by the OEO highest concentration. A cytotoxic effect was found in samples with 1.0% and 1.5% v/v OEO concentrations. [ABSTRACT FROM AUTHOR]