Search

The benefits and drawbacks of a 5-hp reconfigurable induction motor, which was designed for experimental emulation of stator winding interturn and broken rotor bar faults, are presented in this paper. It was perceived that this motor had the potential of quick and easy reconfiguration to produce the desired stator and rotor faults in a variety of different fault combinations. Hence, this motor was anticipated to make a useful test bed for evaluation of the efficacy of existing and new motor fault diagnostics techniques and not the study of insulation failure mechanisms. Accordingly, it was anticipated that this reconfigurable motor would eliminate the need to permanently destroy machine components such as stator windings or rotor bars when acquiring data from a faulty machine for fault diagnostic purposes. Experimental results under healthy and various faulty conditions are presented in this paper, including issues associated with rotor bar-end ring contact resistances that showed the drawbacks of this motor in so far as emulation of rotor bar breakages. However, emulation of stator-turn fault scenarios was successfully accomplished. Index Terms--Condition monitoring, fault diagnostics, fault emulation, induction motors, reconfigurable motors, rotor broken bar faults, stator winding interturn faults.

This paper examines the relationship between rotor design, saliency-based signal injection sensorless control, and power conversion properties for four industrially relevant interior permanent-magnet machine configurations: a 36-slot 6-pole stator with v bar rotor, a 36-slot 6-pole stator with flat bar rotor, a 9-slot 6-pole stator with v bar rotor, and a 9-slot 6-pole stator with flat bar rotor. The influence of rotor geometric design variables over the range of current densities at the maximum torque per ampere angle was found using a design of experiments' methodology and standardized regression coefficients. Tradeoffs between sensorless control and power conversion properties are found using a Monte Carlo methodology. Power conversion and sensorless control properties were analyzed using hybrid static and time-stepping finite-element simulations. [ABSTRACT FROM AUTHOR]

In this paper, a multiobjective design optimization method combining design-of-experiments techniques and differential-evolution algorithms is presented. The method was implemented and utilized in order to provide practical engineering insights for the optimal design of interior and spoke-type permanent-magnet machines. Two combinations with 12 slots and 8 poles and 12 slots and 10 poles, respectively, have been studied in conjunction with rare-earth neodymium-iron-boron (NdFeB) and ferrites. As part of the optimization process, a computationally efficient finite-element electromagnetic analysis was employed for estimating the performance of thousands of candidate designs. Three optimization objectives were concurrently considered for minimum total material cost, power losses, and torque ripple, respectively. Independent variables were considered for both the stator and rotor geometries. A discussion based on a systematic comparison is included, showing, among other things and despite common misconception, that comparable cost versus loss Paretos can be achieved with any of the rotor topologies studied. [ABSTRACT FROM PUBLISHER]

This paper describes the design and experimental evaluation of two high-efficiency interior permanent-magnet (IPM) motors for use in a commercial transcritical \CO2 (R-744) heat pump water heater (HPWH). Two IPM topologies, a 36-slot 6-pole topology and a 9-slot 6-pole topology, were selected, optimized, and prototyped using a common flat-bar IPM rotor. The experimental analysis includes standard measurements of electrical machine parameters, and dynamometer tests. The initial measurements of the \CO2 compressor performance with a stock line-fed induction machine and the 36-slot 6-pole IPM configuration have been completed. This paper finds a small isentropic compressor efficiency improvement from using the 36-slot 6-pole IPM motor compared to the stock line-fed induction machine at rated operating conditions (essentially constant speed). This paper also expands the open literature on the impact of high-efficiency motor drives on \CO2 compressor operation and \CO2 HPWH systems. [ABSTRACT FROM AUTHOR]

In this paper, a robust parametric model of a brushless permanent magnet machine with fractional-slot concentrated windings, which was developed for automated design optimization is presented. A computationally efficient finite-element analysis method was employed to estimate the dq-axes inductances, the induced voltage and torque ripple waveforms, and losses of the machine. A method for minimum effort calculation of the torque angle corresponding to the maximum torque per ampere load condition was developed. A differential evolution algorithm was implemented for the global design optimization with two concurrent objectives of minimum losses and minimum material cost. An engineering decision process based on the Pareto-optimal front for 3,500 candidate designs is presented together with discussions on the tradeoffs between cost and performance. One optimal design was finally selected, prototyped and successfully tested. [ABSTRACT FROM AUTHOR]

The proposed hybrid method combines computationally efficient finite-element analysis (CE-FEA) with a new analytical formulation for eddy-current losses in the permanent magnets (PMs) of sine-wave current-regulated brushless synchronous motors. The CE-FEA only employs a reduced set of magnetostatic solutions yielding substantial reductions in the computational time, as compared with the conventional FEA. The 3-D end effects and the effect of pulsewidth-modulation switching harmonics are incorporated in the analytical calculations. The algorithms are applied to two fractional-slot concentrated-winding interior PM motors with different circumferential and axial PM block segmentation arrangements. The method is validated against 2-D and 3-D time-stepping FEA. [ABSTRACT FROM PUBLISHER]

The design optimization methods described in this paper are employing an ultrafast computationally efficient finite element analysis technique. A minimum number of magnetostatic solutions are used for the analysis, which makes possible the study of thousands of candidate motor designs with typical PC-workstation computational resources. A multi-objective differential evolution algorithm that considers a large number of independent stator and rotor geometric variables and performance criteria, such as average and ripple torque, losses, and efficiency, is used. The optimization method is demonstrated on different permanent magnet (PM) ac synchronous motors in the kilowatt and megawatt power ranges. For the low-power PM ac machine study, a nine-slot six-pole topology is considered. For the high-power PM ac machines, four case studies were carried out with the following: fractional-slot embedded surface PM (SPM), fractional-slot interior PM (IPM), integer-slot SPM, and integer-slot IPM, respectively. Four motor topologies are systematically compared based on optimal Pareto sets. The design optimization of IPM motors includes an additional search for an optimum operating torque angle corresponding to the maximum-torque-per-ampere condition. [ABSTRACT FROM AUTHOR]

Computationally efficient finite-element analysis (FEA) (CE-FEA) fully exploits the symmetries of electric and magnetic circuits of sine-wave current-regulated synchronous machines and yields substantial savings of computational efforts. Motor performance is evaluated through Fourier analysis and a minimum number of magnetostatic solutions. The major steady-state performance indices (average torque, ripple and cogging torque, back-electromotive-force waveforms, and core losses) are satisfactorily estimated as compared with the results of detailed time-stepping (transient) FEA. In this paper, the CE-FEA method is presented and applied to a parametric design study for an interior-permanent-magnet machine. Significant reduction of simulation times is achieved (approximately two orders of magnitude), permitting a comprehensive search of large design spaces for optimization purposes. In this case study, the influence of three design variables, namely, stator tooth width, pole arc, and slot opening, on three performance indices, namely, average torque, efficiency, and full-load torque ripple, is examined, and design trends are derived. One hundred candidate designs are simulated in less than 20 minutes on a state-of-the-art workstation. [ABSTRACT FROM PUBLISHER]