163 results on '"Suo, Hongli"'
Search Results
2. Infiltration effect of Mg with different matter states in the reaction of MgB2 bulks
3. Investigation of a repeatable and widely applicable method to reduce the turn-to-turn contact resistivity of REBCO tapes
4. Possible mechanisms of cubic texture generation in heavily rolling face-centered cubic metal due to the annealing twining
5. Feasible evolution process of tensile property dominant effect factor in annealed high purity nickel by a combination of in situ tensile technique and EBSD
6. CMAS corrosion resistance, thermal shock resistance and numerical simulation of novel surface micromesh thermal barrier coatings
7. Exploration of correlation between the material characteristics of the copper layer on the electrical and thermal properties of REBCO tape and coil
8. Mg gas infiltration for the fabrication of MgB2 pellets using nanosized and microsized B powders
9. Ultra-fast dynamic deposition of EuBa2Cu3O7−δ-BaHfO3 nanocomposite films: Self-assembly structure modulation and flux pinning behaviors
10. Al doped Sr and Cd metal oxide nanomaterials for resistive response of humidity sensing
11. Review of synthesis of high volumetric density, low gravimetric density MgB2 bulk for potential magnetic field applications
12. Effect of stress-relief annealing on rolled texture of nickel-based alloys
13. Systematic investigation of the texture evolution of Cu-Ni alloys with different strains
14. Photocatalytic degradation of the antibiotic ciprofloxacin in the aqueous solution using Mn/Co oxide photocatalyst
15. A Study about Ni–8 at % W Alloy Substrates Used for REBCO Coated Conductors
16. Systematic research on the effect of both positive and negative mismatch dopants in double-doped YBCO superconducting films
17. Synthesis of high surface area AgNPs from Dodonaea viscosa plant for the removal of pathogenic microbes and persistent organic pollutants
18. Strong Cube Texture Formation in Heavily Cold-Rolled Ni8W/Ni12W/Ni8W Composite Alloy Substrates Used in YBCO Coated Conductors
19. Graphene preparation and process parameters by pre-intercalation assisted electrochemical exfoliation of graphite
20. Emerging Cu‐Based Tandem Catalytic Systems for CO2 Electroreduction to Multi‐Carbon Products.
21. Systematical analysis on the grain orientation evolution of pure nickel under plastic deformation by using in-situ EBSD
22. Synthesis of AgNPs coated with secondary metabolites of Acacia nilotica: An efficient antimicrobial and detoxification agent for environmental toxic organic pollutants
23. Electrochemical performance of multifuel based nanocomposite for Solid Oxide Fuel Cell
24. Strong cube texture of super-high tungsten Ni–W alloy substrates used in REBCO coated conductors
25. Metal oxides nanomaterials for the photocatalytic mineralization of toxic water wastes under solar light illumination
26. Ag–Ni and Al–Ni nanoparticles for resistive response of humidity and photocatalytic degradation of Methyl Orange dye
27. Synthesis of silver and aluminum doped magnetic nanoparticles: New fascinating materials with multipurpose applications
28. Aerosol clustering in an urban environment of Beijing during (2005–2017)
29. Fabrication and characterization of textured Ni–5 at.% W/Ni–9.3 at.% W/Ni–5 at.% W composite substrates via solid-clad-by-liquid method
30. Al–Sr metal oxides and Al–Cd layered double hydroxides for the removal of Acridine orange dye in visible light exposure
31. Comparative Characterization of Magnetic Properties of Textured Ni–5 at.%W Alloy Substrates
32. Electrical, dielectric and photocatalytic applications of iron-based nanocomposites
33. Novel two-step procedure for measuring I c vs. tensile stress of commercial REBCO tape.
34. Effect of Yb Substitution on Microstructure and Superconducting Properties of Y1−xYbxBa2Cu3O7−δ Films
35. Strong cube texture formation of Ni5W/Ni9.3W/Ni5W composite thin substrates for YBCO-coated conductors.
36. Evolutions of the texture and microstructure of a heavily cold-rolled Ni9W alloy during recrystallization
37. Fabrication of Ni-5 at. %W Long Tapes with CeO2 Buffer Layer by Reel-to-Reel Method
38. Recrystallization and cube texture formation in heavily cold-rolled Ni7W alloy substrates for coated conductors
39. La2Zr2O7 Buffer Layer Prepared on Cube Textured Ni-5at.%W Substrates by a Nitrate Route
40. Preparation and Superconducting Properties of F-doped SmO 1- xF xFeAs
41. Preparation of solution-based YBCO films with BaSnO 3 particles
42. Study on the formation of cubic texture in Ni–7 at.% W alloy substrates by powder metallurgy routes
43. A simple MOD method to grow a single buffer layer of Ce 0.8Gd 0.2O 1.9 (CGO) for coated conductors
44. Lightest Metal Leads to Big Change: Lithium‐Mediated Metal Oxides for Oxygen Evolution Reaction.
45. Fabrication and characterization of SmO0.7F0.2FeAs bulk with a transition temperature of 56.5 K
46. The Effect of Doping with the Polymer Metallic Complex Poly Zinc Acrylate on Superconducting Bulk MgB2
47. Technique for developing highly strengthened and biaxially textured composite substrates for coated superconductor tapes
48. Two-dimensional X-ray diffraction characterization of growth mechanism of double perovskite-structured nanoparticles in thin films prepared via metal–organic decomposition.
49. Study on the annealing process of in-situ MgB2/Fe tapes by advanced spark plasma sintering (SPS) technique
50. A novel technique for developing composite substrates used in YBCO coated conductors
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.