Search

In the process of grain storage, the use of low-temperature grain storage technology can effectively reduce grain losses during storage and ensure grain quality, which is of great significance for maintaining a stable grain supply. Radiative cooling materials, as a new energy-free cooling technology, achieve cooling by radiating heat in the form of electromagnetic waves into outer space. This approach can address issues associated with traditional cooling methods, such as high energy consumption and high chemical oxygen demand (COD) emissions, offering a green and environmentally friendly new approach to low-temperature grain storage. This paper explained the working principle of polymer-based radiative cooling materials and systematically introduced the composition and selection criteria of polymer-based radiative cooling systems. It also categorized and summarized polymer-based radiative cooling materials according to their structural characteristics. The existing problems with different structured radiative cooling materials, as well as future research directions, were also analyzed. This provides a certain research framework for applying radiative cooling materials to grain storage facilities to achieve low-temperature grain storage.

The construction of anti-disaster backbone grid is of great significance to enhance the power supply capacity of power system under extreme natural disasters. Comprehensively considering economy and reliability, a planning method for anti-disaster backbone grid was proposed. The economy and reliability of the planning scheme were expressed as the strengthened cost and the benefit from loss reduction in life cycle. The objective function was to maximize the unit benefit from loss reduction of the original grid caused by the unit strengthened cost of backbone grid. Taking the network connectivity and safe operation of power system into account, a planning model for anti-disaster backbone grid was established. The model was solved by the improved crisscross optimization (ICSO) algorithm to find the optimal planning scheme. Finally, the effectiveness of the proposed method was verified by the simulation analysis of the IEEE 30-bus system.

The digital twin is considered the central component of modern industry. It has been adopted in many industrial fields. However, its application in nuclear engineering is very rare, especially for the radioactive waste deposits which is an urgent and tricky issue. Motivated by this demand and considering China's research & development guidelines for geological disposal of high-level radioactive waste (a three-step strategy by 2050 to construct the radioactive waste repository), a framework of the radioactive waste repository digital twin is proposed. The digital twin uses the framework + with a multi-layer structure. It can be adopted in the construction of the radioactive waste repository. It can significantly strengthen the management capability, reduce the operating cost, improve the safety level and deal with accidents more efficiently. The first step for the achievement for the digital twin development of radioactive waste repository based on the framework is also introduced in the paper. The proposed digital twin framework of the radioactive waste repository in this work could be widely used as a reference and easily extended to support management in other industrial fields.

Social and organizational innovations are one of the most effective ways to gain social collaboration for effective, rapid, and coordinated interventions. An analysis of the relationship among organizational performance (OP), social innovations (SI) and organizational innovation (OI) in social organizations (SOs) is little discussed in the literature and much less with main component analysis. This paper is an effort to provide some empirical evidences about social and organizational innovations that social organizations in China have implemented to address the social issues of the society. A survey of Chinese SO's is conducted during beginning two months of 2022 in provinces of Jiangsu, Guangdong and Zhejiang to attain the statistics and assessing the insights of the executives of the SOs participating in this study with respect to organizational performance, social and organizational innovations. The technique used to select the sample is a non-probabilistic sampling and multiple linear regression model is applied to determine the partial impact of organizational innovations and social innovations on the organizational performance. The grouping of the variables is carried out through main components analysis. The empirical findings of the study highlight that Chinese SOs are innovative because they adopt management strategies to address the social issues associated with their institutional mission. There are four groups of derived components from organizational and social innovations based on the empirical evidence: SO's innovative activities to modify the environment; inside innovative measures to enhance SO's performance; innovative activities of SO's to enhance their relationships with outside actors; innovative measures to improve the management of SOs related to their mission and institutional projects. The findings of this study offer an efficient solution to government and policy makers for involving SOs in terms of planning of social development in China. The social and organizational innovations are very necessary to overcome the social issues so government should encourage the establishment and sustainability of social organizations.

A giant cervical goiter, defined as a thyroid mass larger than 8 cm in diameter, is usually a nodular or adenomatous goiter. A giant cervical goiter can also be caused by hyperthyroidism (i.e., Hashimoto’s thyroiditis). The surgical indications for patients with Hashimoto’s disease include suspected malignant tumors, persistent symptoms related to the disease, or persistent enlargement of the goiter. We herein describe a woman who developed symptoms of compression from a thyroid tumor, the volume of which was almost the largest reported in the relevant literature to date. The bilateral lobes of the giant thyroid tumor were removed by total en bloc excision. We protected the bilateral recurrent laryngeal nerve and preserved the bilateral upper and lower parathyroid glands in situ. The excised left lobe tumor was 16 × 9 × 5.5 cm, whereas the right lobe tumor was 12 × 8 × 4 cm. The pathological diagnosis was Hashimoto’s thyroiditis. Although surgical excision is difficult, it is still the main treatment modality for giant goiters in patients with Hashimoto’s thyroiditis and can help to reduce the occurrence of complications.

Objectives Due to such factors as docking and temperature due to sunshine exposure, overall and partial response and deformation will occur during the construction and maintenance of surface vessels. On the one hand, it will affect the construction accuracy and safety of the hull, and on the other, it will affect the calibration of the relevant maintenance system.Methods In this paper, based on the finite element method, research on the structural response and deformation analysis method of a docking ship is carried out while taking into account the influence of temperature difference caused by sunshine.Results A finite element model is created for the entire hull of a docked surface ship according to the principles of docking block arrangement. According to the measured temperature data, the structural response and deformation prediction of the docked ship under the temperature difference of sunshine is carried out. The calculation results reveal the reason behind the phenomenon of “lotus leaf deformation” in docked vessels.Conclusions The results of this study are of valuable reference value for the calibration of shipborne weapon systems and aviation support systems in a docked state.

Water glasses with different modulus (mole ratio of SiO2 to Na2O) were applied as a raw material to prepare five solid base catalysts for the synthesis of glycerol carbonate (GC) by the transesterification reaction between glycerol and dimethyl carbonate (DMC). The structure and properties of the five water glass-derived catalysts were investigated by XRD, FT-IR, FESEM, BET and acid–base titration methods. The catalysts with relatively low modulus, including 1.0, 1.5 and 2.0, presented good catalytic abilities, among which the catalyst derived from water glass with 2.0 modulus (WG-2.0) was chosen as the optimal catalyst in the synthesis of GC. This was because WG- -2.0 showed the highest BET surface area, relatively high total basicity, and needed a less amount of NaOH during the preparation process. In the optimization experiments, this catalyst exhibited good catalytic ability with the glycerol conversion of 96.3 % and GC yield of 94.1 % under the condition of glycerol to DMC mole ratio of 1:4, WG-2.0 amount of 4 wt. %, reaction temperature of 348 K and reaction time of 90 min. Furthermore, the reusability experiment of WG-2.0 was also conducted and the results indicated that WG- -2.0 could be reused five times without significant reduction in its catalytic ability.

Accumulating evidence indicates an unexpected role of aberrant splicing in hepatocellular carcinoma (HCC) that has been seriously neglected in previous studies. There is a need for a detailed analysis of alternative splicing (AS) and its underlying biological and clinical relevance in HCC. In this study, clinical information and corresponding RNA sequencing data of HCC patients were obtained from The Cancer Genome Atlas. Percent spliced in (PSI) values and transcriptional splicing patterns of genes were determined from the original RNA sequencing data using SpliceSeq. Then, based on the PSI values of AS events in different patients, a series of bioinformatics methods was used to identify differentially expressed AS events (DEAS), determine potential regulatory relationships, and investigate the correlation between DEAS and the patients’ clinicopathological features. Finally, 25,934 AS events originating from 8,795 genes were screened with high reliability; 263 of these AS events were identified as DEAS. The parent genes of these DEAS formed an intricate network with roles in the regulation of cancer-related pathway and liver metabolism. In HCC, 36 splicing factors were involved in the dysregulation of part DEAS, 100 DEAS events were correlated with overall survival, and 71 DEAS events were correlated with disease-free survival. Stratifying HCC patients according to DEAS resulted in four clusters with different survival patterns. Significant variations in AS occurred during HCC initiation and maintenance; these are likely to be vital both for biological processes and in prognosis. The HCC-related AS events identified here and the splicing networks constructed will be valuable in deciphering the underlying role of AS in HCC.

Background/Aims: Functional recovery in the chronic phase is a difficult problem in intracerebral hemorrhage (ICH) treatment. Long noncoding RNAs (lncRNAs) are demonstrated to be involved in central nervous system (CNS) disorders. However, the roles of lncRNAs in post-ICH injury and repair are poorly understood, especially those that may be attributed to long-term neurological deficit. The present study depicted the lncRNA and messenger RNA (mRNA) profile by microarray at late stage after an experimental ICH. Methods: LncRNA and mRNA microarray was used to first identify differentially expressed genes. Gene ontology (GO) and the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analyses were performed to determine bio-functions and signaling pathways, with which differentially expressed genes are most closely related. Quantitative real-time polymerase chain reaction (PCR) was used to validate the results of microarray. Finally, the lncRNA-mRNA co-expression network was constructed to find the interaction of genes. Results: A total of 625 differentially expressed lncRNAs and 826 expressed mRNAs were identified. Altered genes were enriched in mitochon-drial matrix, G-protein coupled receptor signaling pathway, and olfactory transduction, which may be associated with ICH-induced pathophysiologic changes in the long term. A co-expression network profile based on 5 validated differentially expressed lncRNAs and 205 interacted mRNAs was composed of 210 nodes and 298 connections. Conclusion: Mitochondrial matrix, reduced G-protein coupled receptor activity, and impaired olfactory transduction may be involved in the sequelae following ICH. Further, these dysregulated lncRNAs and mRNAs may be the promising therapeutic targets to overcome obstacles in functional recovery following ICH.

Structural vibrations in Tip-Tilt modes usually affect the closed-loop performance of astronomically optical telescopes. In this paper, the state of art control methods-proportional integral (PI) control, linear quadratic Gaussian (LQG) control, disturbance feed forward (DFF) control, and disturbance observer control (DOBC) of Tip-Tilt mirror to reject vibrations are first reviewed, and then compared systematically and comprehensively. Some mathematical transformations allow PI, LQG, DFF, and DOBC to be described in a uniform framework of sensitivity function that expresses their advantages and disadvantages. In essence, feed forward control based-inverse model is the main idea of current techniques, which is dependent on accuracies of models in terms of Tip-Tilt mirror and vibrations. DOBC can relax dependences on accuracy model, and therefore this survey concentrates on concise tutorials of this method with clear descriptions of their features in the control area of disturbance rejections. Its applications in various conditions are reviewed with emphasis on the effectiveness. Finally, the open problems, challenges and research prospects of DOBC of Tip-Tilt mirror are discussed.

This paper proposes an algorithm of localization based on FPGA and PC. It calculates the position of the target based on the geometrical relationship between the radars and the target through the speeds of the target and the peak-to-peak values measured by two radars at two moments. Currently, almost all the Doppler radars work with frequency modulated continuous wave(FMCW) and finish the frequency measurement by singlechip machine(SCM). This method only need radars work with continuous wave(CW) and finish the frequency measurement and localization on FPGA and PC. It can achieve the least error localization at the lowest cost. This system can alert the drivers to a vehicle in the blind area and remind the position and the speed of the vehicle relative to their vehicles. It can improve the safety of vehicles when changing lanes and turning, and effectively decrease the incidence of traffic accidents.

The traffic bridges along the route of South-to-North Water Diversion Project are numerous. Once a traffic accident occurs causing pollutants in the channel, the water safety, ecological environment and economic development of water receiving areas along the line will be affected . We investigate the bridges along the channel, focusing on the investigation and analysis of hazardous chemicals, nearby backwater gates and water inlets involving 173 cross-channel bridges with large traffic volume. The risk evaluation index system of sudden water pollution is established in this study, while the risk of different bridges is evaluated. We divide bridges in three risk grades, and delimit key prevention areas and key monitoring objects. And the stress of traffic risk factors on the water quality safety is summarized. It is significant for being regarded as basis for contingency plans, hierarchical responses and emergency material reserve for the middle line of the south-to-north water diversion project.

This paper proposes an oscillator based on a deformed structure parallel coupled line filter design. The requirements of this design are the output power meet 10dBm, and phase noise is below -90dBc/Hz at 10kHz off the centre point. This work adopts parallel positive feedback form, and it use Parallel Coupled Line Filter, making this design simple in structure and low in cost. This design has low phase noise and high output power features, working at 2.4GHz, intended to use in a through-the-wall radar system.