Search

Ammonium perchlorate (AP) is the most abundant ingredient in many solid rocket motors and presents a thermal runaway hazard. The addition of metal oxides (MOs) can alter motor performance but may affect decomposition behavior. In this work, a total of 14 MOs, mostly transition metal oxides, were mixed with AP and subjected to isothermal thermogravimetric analysis (TGA). MOs commonly incorporated into AP-based propellants can alter AP decomposition rates, the extent of reaction, and the particle size of the AP itself. Partially decomposed AP showed significant changes in terminal particle size. There is an inverse correlation between MO lattice energy and peak reaction rates of AP/MO mixtures. The objective of this work is not to provide definitive details of mechanisms, but rather to report observations and interactions with a wide variety of MOs, often ones that were not previously reported. The findings have implications for the safe storage of AP and the development of insensitive motors. [ABSTRACT FROM AUTHOR]

Abstract: The properties of TiO2 nanoparticles synthesized using the flame stabilized on a rotating surface method (FSRS) are investigated. The method uses a laminar, premixed, stagnation flame, combining particle synthesis and film deposition in a single step. The current study examines the effects of flame properties on particle characteristics. Synthesized particles were characterized using X-ray diffractometry, Transmission Electron Microscopy and UV–vis spectrometry in order to quantify the effects of equivalence ratio and precursor loading on particle size, crystallinity and optical band-gap. Results show that flame stoichiometry significantly affects crystal phase, but it has little to no effect on particle size and light absorption band edge. In addition, precursor loading impacts both the particle size and the crystal phase. The study demonstrates the potential of the FSRS method for producing tailored nanoscale TiO2 particles for a variety of applications. [ABSTRACT FROM AUTHOR]

Abstract: A new method is proposed to fabricate nanocrystalline titania (TiO2) films of controlled crystalline size and film thickness. The method uses the laminar, premixed, stagnation flame approach, combining particle synthesis and film deposition in a single step. A rotating disc serves as a combination of substrate-holder and stagnation-surface that stabilizes the flame. Disc rotation repetitively passes the substrates over a thin-sheet, fuel-lean ethylene–oxygen–argon flame doped with titanium tetraisopropoxide. Convective cooling of the back side of the disc keeps the substrate well below the flame temperature, allowing thermophoretic forces to deposit a uniform film of particles that are nucleated and grown via the flame stabilized just below the surface. The particle film grows typically at ∼1μm/s. The film is made of narrowly distributed, crystalline TiO2 several nanometers in diameter and forms with a 90% porosity. Analysis shows that the rotation of the stagnation-surface does not reduce the stability of a stagnation flame, nor does it affect the fundamental chemistry of particle nucleation and growth that occurs between the flame and the stagnation surface. [Copyright &y& Elsevier]

Abstract: The evolution of the soot particle size distribution function (PSDF) and particle morphology are studied for premixed ethylene–oxygen–argon flat flames at equivalence ratio over the maximum flame temperature range of 1600–1900 K. Experiments were carried out using an in-situ probe sampling method in tandem with a scanning mobility particle sizer (SMPS), yielding the PSDF for various distances from the burner surface. The morphology of the particles was examined by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Within the particle size range that can be detected, the PSDF transitions from an apparent unimodal PSDF for high temperature flames () to a bimodal PSDF at lower temperatures (). The bimodal PSDF has a noticeable trough that separates the nucleation tail and log-normal mode. This mode-transition trough had been previously thought to occur at a fixed particle size, but these results show a continuous shift of the trough location towards smaller sizes with increasing flame temperature. TEM images show that the particles are spherical, even when the PSDF is bimodal, suggesting that the bimodality occurs as the primary particles undergoes mass and size growth, and is not a result of particle aggregation. Atomic force microscopy of substrate deposited particles shows that particles spread and form hill like structures upon impact with the substrate surface, indicating that the particles are liquid-like at the time of impact. [Copyright &y& Elsevier]