Search

Discusses the article "Equivalent Friction Factor Method for Hydraulic Calculation in Irrigation Laterals," by Pedro Vallesquino and Pedro L. Luque-Escamilla, published in the September/October 2002 issue of the "Journal of Irrigation and Drainage Engineering." Total head losses for different inlet segments; Comparison of characteristic parameters computed from two alternative equation sets; Computation of head losses using energy gradient line.

A simplified method for the resolution of lateral hydraulic problems in laminar and turbulent flow is presented. In the first stage, the head losses are calculated by applying the Darcy–Weisbach equation with a discrete and constant outflow model, which leads to a correction parameter equivalent to Anwar’s G[sub a] factor. The difficulty that arises from variation of the friction factor along the lateral (due to discharge flow) is overcome by means of an equivalent friction factor (f[sub eqN]). In the second stage, this head loss model is used together with a variable discharge model based on Taylor polynomials to make a better estimate of the flow rate distribution by means of a successive-approximations scheme. This new approach directly allows the computation of the real mean lateral’s outflow and the minimum and maximum discharges. In the third stage, the previous results can be improved (if desired) by taking into account the nonconstant outflow distribution model developed in the previous stage. The method proposed is useful to work out the hydraulic computation of laterals with the inlet segment at full or fractional outlet spacing, and complex laterals when a different pipeline diameter, slope, flow regime, or emitter gap has to be considered. The results are comparable to those obtained in the literature. [ABSTRACT FROM AUTHOR]

Presents an approach for solving lateral hydraulic problems in laminar or turbulent flow. Head loss in laminar and turbulent flow; Equation used to calculate friction head losses; Establishment of a successive approximation procedure based on the application of the energy equation.

Presents a response to the comments made on an article about an algorithm for hydraulic calculation in irrigation laterals. Problems identified in the article; Types of SBS simulations proposed in the paper; Reason for the disagreement pointed out by the discussers.