Search

Listeria monocytogenes is motile at 22°C and non-motile at 37°C. In contrast, expression of L. monocytogenes virulence factors is low at 22°C and up-regulated at 37°C. Here, we studied a character of L. monocytogenes near surface swimming (NSS) motility and its effects on adhesion patterns and invasion into epithelial cells. L. monocytogenes and its saprophytic counterpart L. innocua both grown at 22°C showed similar NSS characteristics including individual velocities, trajectory lengths, residence times, and an asymmetric distribution of velocity directions. Similar NSS patterns correlated with similar adhesion patterns. Motile bacteria, including both pathogenic and saprophytic species, showed a preference for adhering to the periphery of epithelial HEp-2 cells. In contrast, non-motile bacteria were evenly distributed across the cell surface, including areas over the nucleus. However, the uneven distribution of motile bacteria did not enhance the invasion into HEp-2 cells unless virulence factor production was up-regulated by the transient shift of the culture to 37°C. Motile L. monocytogenes grown overnight at 22°C and then shifted to 37°C for 2 h expressed invasion factors at the same level and invaded human cells up to five times more efficiently comparatively with non-motile bacteria grown overnight at 37°C. Taken together, obtained results demonstrated that (i) NSS motility and correspondent peripheral location over the cell surface did not depend on L. monocytogenes virulence traits; (ii) motility improved L. monocytogenes invasion into human HEp-2 cells within a few hours after the transition from the ambient temperature to the human body temperature. [ABSTRACT FROM AUTHOR]

We present the results of an experimental and analytical study of the structural and dynamic properties of a monolayer consisting of dust grains in an electrostatic trap in an RF discharge plasma. The possibility of forming a monolayer with an isotropic distribution for interparticle distance and kinetic energy of particles in the structure has been experimentally shown. Isotropy has crucial importance for the study of various processes in such systems, including the kinetics of phase transitions, the formation of directed flows, wave propagation, and others. [ABSTRACT FROM AUTHOR]

The active Brownian motion of single dust particles of various types in the 3D electrostatic DC discharge trap under the action of laser radiation is studied experimentally. Spherical dust particles with a homogeneous surface, as well as Janus particles, are used in the experiment. The properties of the active Brownian motion of all types of dust particles are studied. In particular, the 3D analysis of trajectories of microparticles is carried out, well as an analysis of their root mean square displacement. The mean kinetic energy of motion of the dust particle of various types in a 3D trap is determined for different laser powers. Differences in the character of active Brownian motion in electrostatic traps with different spatial dimensions are found. [ABSTRACT FROM AUTHOR]

An experimental study of the cavitation flow around the National Advisory Committee for Aeronautics 0012 hydrofoil with different surface morphology was carried out in this work. The surface morphology was set by modern laser ablation technology. The average values and intensity of vapor–gas cavities were determined. It has been revealed that laser texturing delays the emerging cavitation and somewhat decreases its intensity at higher cavitation numbers. A decrease in the cavitation number leads to an increase in its intensity for a smooth hydrofoil in comparison with a rough one, which is also expressed in an increase in the frequency of cavities. The paper presents a comparison of the flow regime with equal cavitation numbers, which clearly describes the features of the development of a vapor–gas cavity on the suction side of the foil with different surface morphologies. The paper provides an explanation of the reasons for the influence of surface morphology on the development of cavities. [ABSTRACT FROM AUTHOR]

We analyze the experimental data on the motion of active Brownian micrograins in RF discharge plasmas. In the experiments, two types of microparticles were used: first—plastic grains fully covered with metal, and second—Janus particles with a thin metal cap. We have tracked the trajectories of the separate grains and plotted the pair correlation functions of the observed structures. To examine the motion of the grains, we studied the dependencies of the MFPT dynamic entropy on the coarsening parameter, the fractal dimension of the system on its mean kinetic temperature, and the mean localization area of the grain on its mean kinetic temperature. Based on the obtained results, we conclude that the character of motion of our active Brownian systems changes as the power of an illuminating laser (and, therefore, the mean kinetic temperature of the grains) increases. Janus particles change their trajectories from more chaotic to spiral-like ones; in the case of fully covered particles, we observe the dynamical phase transition from the more ordered structure to the less ordered one. [ABSTRACT FROM AUTHOR]

The nonlinear dust-acoustic instability in the condensed submicron fraction of dust particles in the low-pressure glow discharge at ultra-low temperatures is experimentally and theoretically investigated. The main discharge parameters are estimated on the basisof the dust-acoustic wave analysis. In particular, the temperature and density of ions, as well as the Debye radius, are determined. It is shown that the ion temperature exceeds the temperature of the neutral gas. The drift characteristics of all plasma fractions are estimated. The reasons for the instability excitation are considered. [ABSTRACT FROM AUTHOR]

Stability of a vertically aligned microparticle pair in a stratified glow DC discharge is experimentally investigated. Using laser perturbations, it is shown that, for the same discharge parameters, a pair of microparticles can be suspended in two stable configurations: vertical and horizontal. The interparticle interaction and the electric field of the stratum in the region of particle levitation are quantitatively investigated for the first time. The decharging effect of the lower (downstream) particle by the ion flow wake is also observed for the first time in a glow discharge. The obtained experimental data made it possible to check the analytical criteria for the configurational stability of the system. [ABSTRACT FROM AUTHOR]

Cold atmospheric plasma (CAP), an ionized gas operating at room temperature, has been increasingly studied with respect to its potential use in medicine, where its beneficial effects on tumor reduction in oncology have been demonstrated. This review discusses the cellular changes appearing in cell membranes, cytoplasm, various organelles, and DNA content upon cells' direct or indirect exposure to CAP or CAP-activated media/solutions (PAM), respectively. In addition, the CAP/PAM impact on the main cellular processes of proliferation, migration, protein degradation and various forms of cell death is addressed, especially in light of CAP use in the oncology field of plasma medicine. [ABSTRACT FROM AUTHOR]

Experimental data on the active Brownian motion of single particles in the RF (radio-frequency) discharge plasma under the influence of thermophoretic force, induced by laser radiation, depending on the material and type of surface of the particle, are presented. Unlike passive Brownian particles, active Brownian particles, also known as micro-swimmers, move directionally. It was shown that different dust particles in gas discharge plasma can convert the energy of a surrounding medium (laser radiation) into the kinetic energy of motion. The movement of the active particle is a superposition of chaotic motion and self-propulsion. [ABSTRACT FROM AUTHOR]

We present the results of an experimental study of the behavior of a colloidal plasma system formed by copper-coated and uncoated polymer particles under the action of laser irradiation. A comparative study of particle velocity distribution profiles depending on the power of the pushing laser was conducted. In the case of uncoated melamine-formaldehyde (MF) particles, we observed the well-known action of light pressure, causing shear stress in the colloidal plasma structure and leading to the occurrence of a laminar flow within the affected area. For the copper-coated MF particles, we revealed some additional patterns of behavior for the dust particles, i.e., kinetic temperature growth due to laser radiation absorption by the copper coating, as well as the appearance of chaotic particle motion. We believe that this happens due to the existence of defects in the coating, causing asymmetric heating of the particles, which in turn leads to chaotic deviations of the photophoretic force pushing the particles in different directions. [ABSTRACT FROM AUTHOR]

The research article is presented on Magnetic levitational bioassembly of three dimensional tissue construct in space. Topics including Magnetic levitational bioassembly of three-dimensional (3D) tissue constructs represents a rapidly emerging scaffold- and label-free approach and alternative conceptual advance in tissue engineering; and 3D tissue constructs have been biofabricated for the first time in space under microgravity from tissue spheroids consisting of human chondrocytes.

The nonlinear dust-acoustic instability in the condensed submicron fraction of dust particles in the low-pressure glow discharge at ultra-low temperatures is experimentally and theoretically investigated. The main discharge parameters are estimated on the basisof the dust-acoustic wave analysis. In particular, the temperature and density of ions, as well as the Debye radius, are determined. It is shown that the ion temperature exceeds the temperature of the neutral gas. The drift characteristics of all plasma fractions are estimated. The reasons for the instability excitation are considered.

Tissue spheroids have been proposed as building blocks in 3D biofabrication. Conventional magnetic force-driven 2D patterning of tissue spheroids requires prior cell labeling by magnetic nanoparticles, meanwhile a label-free approach for 3D magnetic levitational assembly has been introduced. Here we present first time report on rapid assembly of 3D tissue construct using scaffold-free, nozzle-free and label-free magnetic levitation of tissue spheroids. Chondrospheres of standard size, shape and capable to fusion have been biofabricated from primary sheep chondrocytes using non-adhesive technology. Label-free magnetic levitation was performed using a prototype device equipped with permanent magnets in presence of gadolinium (Gd 3+ ) in culture media, which enables magnetic levitation. Mathematical modeling and computer simulations were used for prediction of magnetic field and kinetics of tissue spheroids assembly into 3D tissue constructs. First, we used polystyrene beads to simulate the assembly of tissue spheroids and to determine the optimal settings for magnetic levitation in presence of Gd 3+ . Second, we proved the ability of chondrospheres to assemble rapidly into 3D tissue construct in the permanent magnetic field in the presence of Gd 3+ . Thus, scaffold- and label-free magnetic levitation of tissue spheroids is a promising approach for rapid 3D biofabrication and attractive alternative to label-based magnetic force-driven tissue engineering.