Search

Hydrogen energy from solar water-splitting is known as an ideal method with which to address the energy crisis and global environmental pollution. Herein, the first-principles calculations are carried out to study the photocatalytic water-splitting performance of single-layer GaInSe3 under biaxial strains from −2% to +2%. Calculations reveal that single-layer GaInSe3 under various biaxial strains has electronic bandgaps ranging from 1.11 to 1.28 eV under biaxial strain from −2% to +2%, as well as a completely separated valence band maximum and conduction band minimum. Meanwhile, the appropriate band edges for water-splitting and visible optical absorption up to ~3 × 105 cm−1 are obtained under biaxial strains from −2% to 0%. More impressively, the solar conversion efficiency of single-layer GaInSe3 under biaxial strains from −2% to 0% reaches over 30%. The OER of unstrained single-layer GaInSe3 can proceed without co-catalysts. These demonstrate that single-layer GaInSe3 is a viable material for solar water-splitting. [ABSTRACT FROM AUTHOR]

It is widely recognized that the intrinsic dipole in two-dimensional (2D) photocatalysts promotes hydrogen production during water splitting. Herein, we wonder whether the intrinsic dipole plays a negative role in water splitting. In this work, we make a comparative study of the structural, electronic, and photocatalytic properties of Janus B2XY (X, Y = S, Se, Te) and F-BNBN-H monolayers using first principles. Our theoretical results reveal that both B2XY and F-BNBN-H monolayers exhibit spatially separated conduction band minimum (CBM) and valence band maximum (VBM), as well as vacuum level differences at the opposite surfaces due to the intrinsic dipole. The F-BNBN-H monolayer has excellent redox ability for water splitting, because its CBM is located at the surface with a lower vacuum level and its VBM is distributed on the opposite surface possessing a higher vacuum level. By sharp contrast, B2XY monolayers have limited or vanishing redox ability, because their CBM is located at the surface with a higher vacuum level and their VBM is distributed on the opposite surface with a lower vacuum level. This work emphasizes the negative role of vacuum level differences of photocatalysts caused by the intrinsic dipole in water splitting. [ABSTRACT FROM AUTHOR]

A series of new 1,3,4‐oxadiazin‐5(6H)‐one derivatives (6a–n) of dehydroabietic acid were designed and synthesized as potential antimicrobial and antitumor agents. Their structures were characterized by IR, 1H NMR, 13C NMR, MS, and elemental analyses. All the title compounds were evaluated for their antimicrobial activity against four bacterial and three fungal strains using the serial dilution method. Among them, compound 6e showed the highest antibacterial activity against Bacillus subtilis with a minimum inhibitory concentration (MIC) value of 1.9 μg/mL. In addition, the in vitro cytotoxic activities of the title compounds were also assayed against three human carcinoma cell lines (MCF‐7, SMMC‐7721, and HeLa) through the MTT colorimetric method. As a result, compounds 6b, 6g, 6k, and 6m exhibited significant inhibition against at least one cell line with IC50 values below 10 μM. Compound 6m was especially found to be the most potent derivative with IC50 values of 2.26 ± 0.23, 0.97 ± 0.11, and 1.89 ± 0.31 μM against MCF‐7, SMMC‐7721, and HeLa cells, respectively, comparable to positive control etoposide. [ABSTRACT FROM AUTHOR]

Highlights: [•] A modified polyacrylamide gel route is used to synthesize novel light emission materials AlFeO3. [•] Phase transformation process of AlFeO3 have been studied. [•] Luminescence mechanisms of AlFeO3 have been discussed. [ABSTRACT FROM AUTHOR]

A modified polyacrylamide gel route is applied to synthesize SnO2 nanoparticles. High-quality SnO2 nanoparticles with a uniform size are prepared using different chelating agents. The average particle size of the samples is found to depend on the choice of the chelating agent. The photoluminescence spectrum detected at λex = 230 nm shows a new peak located at 740 nm due to the surface defect level distributed at the nanoparticle boundaries. [ABSTRACT FROM AUTHOR]

Three ZnAl2O4 samples were prepared via a modified polyacrylamide gel method using a citric acid solution with different aluminum salt starting materials, including AlCl3∙6H2O, Al2(SO4)3∙18H2O, and Al(NO3)3∙9H2O under identical conditions. The influence of different aluminum salts on the morphologies, phase purity, and optical and fluorescence properties of the as-prepared ZnAl2O4 nanoparticles were studied. The experimental results demonstrate that the phase purity, particle size, morphology, and optical and fluorescence properties of ZnAl2O4 nanoparticles can be manipulated by the use of different aluminum salts as starting materials. The energy bandgap (Eg) values of ZnAl2O4 nanoparticles increase with a decrease in particle size. The fluorescence spectra show that a major blue emission band around 400 nm and two weaker side bands located at 410 and 445 nm are observed when the excitation wavelength is 325 nm. The ZnAl2O4 nanoparticles prepared from Al(NO3)3∙9H2O exhibit the largest emission intensity among the three ZnAl2O4 samples, followed in turn by the ZnAl2O4 nanoparticles prepared from Al2(SO4)3∙18H2O and AlCl3∙6H2O. These differences are attributed to combinational changes in Eg and the defect types of the ZnAl2O4 nanoparticles. [ABSTRACT FROM AUTHOR]

It is widely recognized that the intrinsic dipole in two-dimensional (2D) photocatalysts promotes hydrogen production during water splitting. Herein, we wonder whether the intrinsic dipole plays a negative role in water splitting. In this work, we make a comparative study of the structural, electronic, and photocatalytic properties of Janus B 2 XY (X, Y = S, Se, Te) and F-BNBN-H monolayers using first principles. Our theoretical results reveal that both B 2 XY and F-BNBN-H monolayers exhibit spatially separated conduction band minimum (CBM) and valence band maximum (VBM), as well as vacuum level differences at the opposite surfaces due to the intrinsic dipole. The F-BNBN-H monolayer has excellent redox ability for water splitting, because its CBM is located at the surface with a lower vacuum level and its VBM is distributed on the opposite surface possessing a higher vacuum level. By sharp contrast, B 2 XY monolayers have limited or vanishing redox ability, because their CBM is located at the surface with a higher vacuum level and their VBM is distributed on the opposite surface with a lower vacuum level. This work emphasizes the negative role of vacuum level differences of photocatalysts caused by the intrinsic dipole in water splitting.

Three kinds of Al-TiO 2 samples and pure TiO 2 samples were synthesized via a modified polyacrylamide gel route using different aluminum salts, including Al 2 (SO 4 ) 3 ∙18H 2 O, AlCl 3 , and Al(NO 3 ) 3 ∙9H 2 O under identical conditions. The influence of different aluminum salts on the phase purity, morphologies, thermal stability of anatase and photocatalytic properties of the as-prepared Al-TiO 2 nanoparticles were studied. The energy gap (Eg) of Al-TiO 2 nanoparticles decreases due to Al ion doping into TiO 2 . The photocatalytic activities of the Al-TiO 2 samples were investigated by the degradation of acid orange 7 dye in aqueous solution under simulated solar irradiation. The Al-TiO 2 nanoparticles prepared from Al(NO 3 ) 3 ∙9H 2 O exhibit the best photocatalytic activity among the four kinds of samples, followed in turn by the Al-TiO 2 nanoparticles prepared with AlCl 3 , Al 2 (SO 4 ) 3 ∙18H 2 O and pure TiO 2 . The different performances are attributed to complex effects of Eg, particle size, surface morphology, phase purity and the defect sites of the Al-TiO 2 nanoparticles.

Three ZnAl2O4 samples were prepared via a modified polyacrylamide gel method using a citric acid solution with different aluminum salt starting materials, including AlCl3 ∙ 6H2O, Al2(SO4)3 ∙ 18H2O, and Al(NO3)3 ∙ 9H2O under identical conditions. The influence of different aluminum salts on the morphologies, phase purity, and optical and fluorescence properties of the as-prepared ZnAl2O4 nanoparticles were studied. The experimental results demonstrate that the phase purity, particle size, morphology, and optical and fluorescence properties of ZnAl2O4 nanoparticles can be manipulated by the use of different aluminum salts as starting materials. The energy bandgap (Eg) values of ZnAl2O4 nanoparticles increase with a decrease in particle size. The fluorescence spectra show that a major blue emission band around 400 nm and two weaker side bands located at 410 and 445 nm are observed when the excitation wavelength is 325 nm. The ZnAl2O4 nanoparticles prepared from Al(NO3)3 ∙ 9H2O exhibit the largest emission intensity among the three ZnAl2O4 samples, followed in turn by the ZnAl2O4 nanoparticles prepared from Al2(SO4)3 ∙ 18H2O and AlCl3∙6H2O. These differences are attributed to combinational changes in Eg and the defect types of the ZnAl2O4 nanoparticles.