Search

Mid‐infrared (MIR) lasers generated by nonlinear optical (NLO) crystals have aroused extensive attention in various military and civilian applications. Among the MIR NLO crystal family, LiInSe2 (LISe) is a promising candidate in the generation of MIR lasers due to its wide transmission range, large bandgap, and high laser‐induced damage threshold. However, the intrinsic defects in LISe induce optical losses, which will induce laser damage and hinder the performance of MIR laser generation. In this work, the mechanism of optical absorption induced by defects is revealed in LISe through transient absorption (TA) spectroscopy. It is verified that the deep‐level defects in LISe give rise to the extra optical absorption, which is owing to the excited state absorption (ESA) and photo‐induced absorption (PIA). Accordingly, for improving the optical properties of LISe crystals, Li2Se vapor‐mediated annealing to reduce defects concentration is rationally designed. The results confirmed that the optical properties of annealed LISe are improved due to the decrease of defects concentration. Ultimately, the performance of MIR laser generation is successfully enhanced by using the annealed LISe crystal. This work provides deep insights into the defect‐induced absorption losses in LISe crystals and promotes the application of LISe crystals in MIR laser generation. [ABSTRACT FROM AUTHOR]

Low and unstable digestion performance is a challenging issue for anaerobic digestion, which prompts researchers to develop new strategies. In addition to traditional approaches such as co-digestion, pre-treatment, and recirculation, some emerging strategies, namely additive processes and microaeration, have also been recognized and developed in recent years. Many studies have evaluated the effect of these strategies on digestion performance. However, their comprehensive analysis is lacking, especially regarding the mechanisms of the different strategies. This review presents a comprehensive overview of research progress on these strategies based on the latest research, considering the five main strategies listed above. Through critical thinking, a summary of their mechanism, reactor performance, and availability of these strategies is presented. The results demonstrate that the contribution of microaeration is mainly to balance the composition and activity of hydrolysis, acidogenesis, and methanogenic archaea. Recirculation and co-digestion mainly balance mass and reaction environments. Pre-treatment, such as removing lignin, reducing cellulose crystallinity, and increasing the substrate-specific surface area, makes the characteristics of the substrate more conducive to the digestion of microorganisms. The mechanism of additive strategies varies greatly depending on the type of additive, such as enhancing interspecies electron transfer through conductive materials, resisting adverse digestion conditions through functional microbial additives, and accelerating nutrient absorption by regulating the bioavailability of trace elements. Although these strategies have different mechanisms for promoting digestion performance, their ultimate effect is to allow the parameters of the reactor to reach an ideal status and then achieve a balance among the substance, microorganisms, and water in an anaerobic reactor. [ABSTRACT FROM AUTHOR]

The Circum-Bohai-Sea Region is an important economic zone of China. The sea ice, which occurs at each winter, is the major marine hazard of the Bohai Sea. As a result, it is very important to evaluate the damage effects quantitatively in this region, which is seldom studied and analyzed systematically using long-time-series data. In this paper, the sea-ice disaster in the Bohai Sea is evaluated quantitatively based on the Sentinel-1 and GOCI. For different hazard-bearing bodies of the marine transportation and the offshore constructions, different sea-ice-hazard indexes are defined, which can be applied to analyze the sea-ice disaster quantitatively in the Bohai Sea, including the annual and inter-annual variations in the period from 2011 to 2017. The analysis results can provide the reference of the sea-ice monitoring in the Bohai Sea.

To study the characteristics of nitrogen (N) loss on slopes, different vegetation (bare soil, alfalfa), slopes (5°, 10°, 15°), and rainfall intensities (40, 60, 80 mm/h) were set as variable factors in simulated rainfall experiments. Surface runoff accounts for 60.38–96.16% of total runoff and most N loss (57.69–88.67% of NO3−-N). Alfalfa can reduce average concentrations of N loss in runoff and reduce N loss in surface runoff by more than 48.29%, as well as subsurface runoff by 3.8%. Average N loss in subsurface runoff exceeds that of surface runoff. Rainfall intensity most affects N loss from surface runoff in bare soil conditions, and slope most affects N loss in subsurface runoff. Rainfall intensity in alfalfa treatments most influences runoff volume and N loss. The comprehensive effects of rainfall intensity, slope, and vegetation cover on the total loss of various forms of nitrogen in surface runoff can be described using a linear correlation equation, with a correlation coefficient between 0.84 and 0.91. [ABSTRACT FROM AUTHOR]

Two-dimensional semiconductors, such as MoS2, have demonstrated great potential applications in post-Moore electronic and optoelectronic devices, and organic cations intercalation has been widely utilized to modulate their physical properties. However, the correlation between the conductivity, carrier mobility, carrier density, and structure of organic cations intercalated MoS2 is still unclear. In this Letter, we systematically investigated the structural and electrical transport properties of pristine MoS2 and MoS2 intercalated with various organic cations such as tetradecyltrimethyl-ammonium, tetraheptyl-ammonium, and cetyltrimethyl-ammonium. Semimetal bismuth (Bi) was used as electrodes to make Ohmic contact with MoS2, and four-probe measurements were employed to obtain the intrinsic conductivity of MoS2. The intercalated organic cations greatly expand interlayer spacing and strongly dope MoS2 up to an electron concentration of 6.1 × 1013 cm−2 depending on the size and intercalation amount of organic cations. The severe electron doping constrains the out-of-plane A 1 g vibration mode and screens the Coulomb scattering, such that the intercalated MoS2 has enhanced Hall mobility of >50 cm2 V−1 s−1 at room temperature and even >1700 cm2 V−1 s−1 at 5 K. The intercalated MoS2 responds much faster than pristine MoS2 when functioning as a phototransistor. Our work provides insight for understanding the electrical transport properties of MoS2 and designing more efficient electronic and optoelectronic devices. [ABSTRACT FROM AUTHOR]

The gas flow temperature signal simulation system (ATSSS) plays a crucial role in the hardware-in-the-loop simulation of hypersonic aircraft. The accuracy of gas flow temperature measurements is of paramount importance for the ATSSS. This system comprises a high-temperature plasma heater, a gas flow mixing chamber, and thermocouples. The ATSSS exhibits specific characteristics such as high temperatures, rapid temperature changes, and fast flow rates. However, due to the large measurement time constant of high-temperature thermocouples, significant dynamic errors are introduced into the measurement results. To address this issue and enhance the dynamic measurement accuracy of gas flow temperature, this study establishes a thermocouple heat transfer model for the ATSSS. It also analyzes the mechanism behind the generation of dynamic errors in the ATSSS and proposes a three-thermocouple coupled temperature measurement dynamic compensation method (TTCTMDC). This method compensates for errors caused by thermal convection, thermal radiation, and thermal conduction under high-temperature conditions. Simulation results demonstrate that the proposed method can reduce errors by 50% to 80%. In addition, an experimental platform for the ATSSS is constructed, and the TTCTMDC method is employed to compensate for measurement errors. The results indicate that the dynamic measurement error can be reduced to 1/4 to 1/2 of the original value using the TTCTMDC method. This research lays a foundation for the successful development of the ATSSS and provides a novel approach to dynamically measuring high-temperature gas flow, thereby advancing scientific research in the field of measurement. [ABSTRACT FROM AUTHOR]