Search

We develop a model of interaction between photons and electrons in an active vortex field, which can generate a fluorescence spectrum with the characteristics of orbital angular momentum (OAM). In an active optical fiber, our findings generalize the notion of photon–electron interaction and point to a new kind of OAM-mode broad-spectrum light source, which could be interpreted in two processes: one microscopically is the excitation of OAM-carrying photons based on the photon–electron interaction; the other macroscopically is the emission and transmission of a donut-shaped fluorescence in a vortex field with a spiral phase wavefront in a ring-core active fiber. Here we present a straightforward experimental method that the emission of broad-spectrum fluorescence with an OAM feature is actualized and validated in a ring-core erbium-doped fiber. The spectrum has a broad spectral width up to 50 nm. Furthermore, four wavelengths are extracted from the fluorescence spectrum and superimposed with their corresponding Gaussian beams, from which the spiral-shaped interferograms of OAM modes in a broad spectrum are identified with high purity. The application of the OAM-based fluorescence light source may range from classical to quantum information technologies, and enable high-capacity communication, high-sensitivity sensing, high-resolution fluorescence imaging, etc.

A low-noise Brillouin random fiber laser (BRFL) based on dynamic fiber grating (DFG)-assisted self-injection locking (SIL) as a laser carrier for coherent communication is proposed and experimentally demonstrated. The utilization of the DFG-based SIL basically guarantees an innovative purification of ultra-narrow-linewidth laser radiation after the removal of residual random modes from the gain competition, enabling unprecedented long-term frequency-stabilized coherent lasing resonance over a record of 30 s. Consequently, the relative intensity noise of the generated Stokes random laser is significantly suppressed by ∼20 dB, and the frequency/phase noise imposed by random mode hopping is additionally mitigated. Meanwhile, stimulated Brillouin scattering and randomly distributed Rayleigh scattering along the kilometer-long single-mode fiber further suppress laser frequency/phase noise, benefiting the ultra-narrow laser linewidth of 450 Hz. As a proof-of-concept, an 8-Gbaud (32 Gb/s) 16-quadrature amplitude modulation transmission based on the proposed self-injection locked low-noise BRFL as the laser carrier is demonstrated, achieving a low bit error rate of 3.02 × 10 − 5 . The impact of the laser noise on coherent communication is systematically investigated, highlighting the potential in high-capacity coherent communication. [ABSTRACT FROM AUTHOR]

The discovery of graphene has intrigued the significant interest in exploring and developing the two-dimensional layered materials (2DLMs) for the photonics application in recent years. Unlike the isotropic graphene, a number of 2DLMs possess the in-plane anisotropic crystal structure with low symmetry, enabling a new degree of freedom for achieving the novel polarization-dependent and versatile ultrafast photonic devices. In this review article, we focus on the typical anisotropic 2DLMs including BP, ReS2, ReSe2, SnS, and SnSe and summarize the recent development of these anisotropic 2DLMs in the pulsed laser and the optical switch applications. First, we introduce the fabrication methods as well as the material characterization of the anisotropic 2DLMs by analyzing the polarized Raman configuration. Second, we discuss the anisotropic nonlinear optical properties of the anisotropic 2DLMs and concentrate on the anisotropic nonlinear absorption response. Next, we sum up state of the art of the anisotropic 2DLMs in the application of pulse lasers and optical switches. This review ends with perspectives on the challenge and outlook of the anisotropic 2DLMs for ultrafast photonics applications.

Whispering gallery mode resonators provide an intriguing platform for precision measurement due to their high responsivity and low detection limit. Here, we propose and demonstrate an optofluidic microbottle resonator (OFMBR) that is utilized to measure droplet gravity-induced mechanical force, realized by establishing a lever model between tapered fiber and OFMBR. The mechanical force can be amplified by adjusting the ratio of the load arm to the effort arm of the lever, which is validated by theoretical simulation. The evolved mechanical force deforms OFMBR morphology and enhances light scattering, resulting in mixed variations in the transmission spectrum, including resonance wavelength, mode linewidth, and signal intensity. Experimentally, the mechanical force is first measured by monitoring resonance wavelength shift, and a responsivity of −56 pm/mN is obtained within the range of 0–0.2 mN. Furthermore, to monitor the mixed variations in the transmission spectrum and obtain the actual mechanical force directly, the optical barcode method is utilized to simultaneously monitor the variations of multimode features. The arbitrary unknown mechanical force is determined by the cross correlation function, and the measurement resolution is about 5 µN. Our scheme provides a thread for characterizing the liquid properties and investigating the dynamics at solid–liquid interfaces. [ABSTRACT FROM AUTHOR]

We develop a model of interaction between photons and electrons in an active vortex field, which can generate a fluorescence spectrum with the characteristics of orbital angular momentum (OAM). In an active optical fiber, our findings generalize the notion of photon–electron interaction and point to a new kind of OAM-mode broad-spectrum light source, which could be interpreted in two processes: one microscopically is the excitation of OAM-carrying photons based on the photon–electron interaction; the other macroscopically is the emission and transmission of a donut-shaped fluorescence in a vortex field with a spiral phase wavefront in a ring-core active fiber. Here we present a straightforward experimental method that the emission of broad-spectrum fluorescence with an OAM feature is actualized and validated in a ring-core erbium-doped fiber. The spectrum has a broad spectral width up to 50 nm. Furthermore, four wavelengths are extracted from the fluorescence spectrum and superimposed with their corresponding Gaussian beams, from which the spiral-shaped interferograms of OAM modes in a broad spectrum are identified with high purity. The application of the OAM-based fluorescence light source may range from classical to quantum information technologies, and enable high-capacity communication, high-sensitivity sensing, high-resolution fluorescence imaging, etc. [ABSTRACT FROM AUTHOR]

Soliton microcombs, offering large mode spacing and broad bandwidth, have enabled a variety of advanced applications, particularly for telecommunications, photonic data center, and optical computation. Yet, the absolute power of microcombs remains insufficient, such that optical power amplification is always required. Here, we demonstrate a combined technique to access power-sufficient optical microcombs, with a photonic-integrated soliton microcomb and home-developed erbium-doped gain fiber. The soliton microcomb is generated in an integrated Si 3 N 4 microresonator chip, which serves as a full-wave probing signal for power amplification. After the amplification, more than 40 comb modes, with 115-GHz spacing, reach the onset power level of >−10 dBm, which is readily available for parallel telecommunications , among other applications. [ABSTRACT FROM AUTHOR]

We propose and demonstrate a trapezoidal angled fiber coupler for excitation of whispering-gallery mode microsphere resonator, with enhanced Fano resonance. The reflection from the angled fiber is enhanced when the oblique angle is greater than critical angle, which is obtained as 30° theoretically for angled fiber. To enhance the endface reflection, the front tip of the angled fiber is polished flat to achieve the trapezoidal angled fiber. Compared with angled fiber, the proportion of Fano lineshape in spectra for trapezoidal angled fiber is nearly doubled and the slope is greatly improved, which reaches 304.55 dB/nm. Moreover, through the coupling of dual microspheres, the ${Q}$ factor is improved severalfold and the thermal tuning efficiency is increased by 50%. With the advantage of low cost, easy fabrication procedure and reflection mode operation, the proposed device shows a great potential for sensing, optical tuning and optical switching applications. [ABSTRACT FROM AUTHOR]